Find Verified Gym Ropes Cables Suppliers, Manufacturers and Wholesalers

Detailed Product Description
Ionizing Air Gun/Anti-Static Gun/Static Elimination Gun is a hand-hold air gun designed to neutralize the static charges and removing dust particles from the surfaces in the industrial applications. Due to high-technologically design ,it is possible to produce more efficient results to solve static electric troubles even in high speed applications. It provides high performance and efficient ionization with fast discharging time. Installation is simple, stable to eliminate static electricity, wind is strong and fast speed, Because the air gun body s plastic is import from JAPAN, Light weight, higher working efficiency, adjustable air quantity. It need be used with ATS power supply together;

Ionizing Air Gun/Anti-Static Gun/Static Elimination Gun Working principle:
ATS 2000 Series Ionizing Air Gun/anti-static gun/static elimination gun can produce positive and negative charge with a lot of, the high-speed gas compression blow out, can be brought to the charge on the object and fall, when the object surface is negatively charged, it will attract positive ion in the air, when the object surface is positively charged, it will be a negative ion attract in the air flow, so that the static electricity on the surface of the object eliminated, high compressed air can also blown away the stubborn dirt on the object and to neutralize electrostatic.
Product features:
• Plastic handle, good handle, adjustable wind power
• Eliminate static efficiently
• Safety induction without electric shock
• Good grounding protection
• Mainly used in electronics, spray, plastic, medicine, microbiology,
electronics and other industries.

Ionizing Air Gun/Anti-Static Gun/Static Elimination Gun Specification

Model: ATS-2001, ATS-2002, ATS-2003
Input Voltage: 4.6KV,7kv(work with ATS-3003 power supply)
Current Consumption: 350 A
Current Consumption: 0 -50
Weight: 0.5kg
HV cable length : 3meters
Operating air pressure : 0.3mpa-0.8mpa
Operating air velocity : 10m/l sec

Model: ATS-2004
Input Voltage: 5.6KV(work with ATS-3002 power supply)
Current Consumption: 350 A
Current Consumption: 0 -50
Weight: 0.5kg
HV cable length : 3meters
Operating air pressure : 0.3mpa-0.8mpa
Operating air velocity : 10m/l sec
Test Results
Testing Conditions RH: 60% ±5 Temperature:22
Testing Conditions : l kv-100v
Distance: 150mm Distance
Positive: 0.7s
Negative: 0.8s
Offset Voltage : ±30V

Detailed product description
Ats-8kv, 9kv, 10kv , 12kvpower supplyis supplying the electronic power for anti-static bar. Because of different output voltage, there are 3 types power supply for choose.
Especially using in bag making machine.

Anti-static bar/ionizing air bar for bag making machinery working principle:
Ats-8kv, 9kv, 10kv , 12kv power supply is using the high voltage transformer to power frequency voltage booster to the required voltage, for the use of different static removing products.
Product features:
1. Adapt to the wide voltage range
2. Work stable performance security
3. Installation easily and operation simple
4. Good grounding protection

Product output voltage bracket pipe emmiters power cable
Anti-static bar max 10kv aluminum pvc stainless 2m

Product service
1.After the warranty period of service
Where the company sells after warranty period still will be responsible to repair the product free in charge, in order to protect the interests of customers.
2.If customers open and repair ion fan themselves, our company wonâ??t supply free warranty, according to the situation of discretion.

V

Product name:
S type force sensor

Features:
1. Miniature s type tension load cells are small and it is easy to install them.
2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency.
3. The load cells are made of stainless steel and provide robust construction.
4. The load cells utilize strain gauge technology and provide high dynamic frequency

Applications:
Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc.

Technical specification:

Rated output
2.0/3.0 ± 10% mv / v
Zero balance
±2 % f.S.
Non-linearity
0.05% f.S.
Hysteresis
0.05% f.S.
Repeatability
0.05% f.S.
Creep (30min)
0.05% f.S.
Temp. Effect on output
0.03% f.S. / 10ºc
Temp. Effect on zero
0.03% f.S. / 10ºc
Input impedance
385±5
Output impedance
350±3
Insulation resistance
5000m/100vdc
Recommended excitation
5-10v
Maximum excitation
15 v
Compensated temp range
- 10 ~ 60 ºc
Operation temp range
- 20 ~ 80ºc
Safe overload
150%
Ultimate overload
200 %
Cable size
53m
Wiring
Red: + excitation black: - excitation
Green: + signal white: - signal.

Product name:
S type force sensors

Features:

1. Miniature s type tension load cells are small and it is easy to install them.
2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency.
3. The load cells are made of stainless steel and provide robust construction.
4. The load cells utilize strain gauge technology and provide high dynamic frequency

Applications:
Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc.


Technical specification:
Rated output
2.0 â± 10% mv / v
Zero balance
±2 % f.S.
Non-linearity
0.05% f.S.
Hysteresis
0.05% f.S.
Repeatability
0.05% f.S.
Creep (30min)
0.05% f.S.
Temp. Effect on output
0.03% f.S. / 10âºc
Temp. Effect on zero
0.03% f.S. / 10âºc
Input impedance
350â±5,
Output impedance
350â±5,
Insulation resistance
5000m, /100vdc
Recommended excitation
5-10v
Maximum excitation
15 v
Compensated temp range
- 10 ~ 60 âºc
Operation temp range
- 20 ~ 80âºc
Safe overload
120%
Ultimate overload
150 %
Cable size
Ã?4ã?3m
Wiring
Red: + excitation black: - excitation
Green: + signal white: - signal.

Product Name:
S type Force Sensors

Features:
1. Miniature S type Tension Load Cells are small and it is easy to install them.
2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency.
3. The load cells are made of stainless steel and provide robust construction.
4. The load cells utilize strain gauge technology and provide high dynamic frequency

Applications:
Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc.

Technical Specification:
Rated output
2.0 ± 5% mV / V
Zero balance
±2 % F.S.
Non-linearity
0.03% F.S.
Hysteresis
0.03% F.S.
Repeatability
0.03% F.S.
Creep (30min)
0.03% F.S.
Temp. effect on output
0.025% F.S. / 10ºC
Temp. effect on zero
0.025% F.S. / 10ºC
Input impedance
350±5Ω
Output impedance
350±5Ω
Insulation resistance
�5000MΩ/100VDC
Recommended excitation
5-10V
Maximum excitation
15 V
Compensated temp range
- 10 ~ 60 ºC
Operation temp range
- 20 ~ 80ºC
Safe overload
120%
Ultimate overload
150 %
Cable size
Ã?5Ã?3m
Wiring
Red: + Excitation Black: - Excitation
Green: + Signal White: - Signal

Product Name:
S type Force Sensors

Features:
1. Miniature S type Tension Load Cells are small and it is easy to install them.
2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency.
3. The load cells are made of stainless steel and provide robust construction.
4. The load cells utilize strain gauge technology and provide high dynamic frequency

Applications:
Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc.



Technical Specification:
Capacity 10~5000kg
Rated output
2.0 ± 10% mV / V
Zero balance
±2 % F.S.
Non-linearity
0.03% F.S.
Hysteresis
0.03% F.S.
Repeatability
0.03% F.S.
Creep (30min)
0.03% F.S.
Temp. effect on output
0.025% F.S. / 10ºC
Temp. effect on zero
0.025% F.S. / 10ºC
Input impedance
350±5Ω
Output impedance
350±5Ω
Insulation resistance
�5000MΩ/100VDC
Recommended excitation
5-10V
Maximum excitation
15 V
Compensated temp range
- 10 ~ 60 ºC
Operation temp range
- 20 ~ 80ºC
Safe overload
120%
Ultimate overload
150 %
Cable size
Ã?5Ã?3m
Wiring
Red: + Excitation Black: - Excitation
Green: + Signal White: - Signal




capacity A B C D M Weight
10/20/30/50/75KG 63.5 50.8 12.7 19 M8*1.25ï¼?1/4-28ï¼?
100/200/250/300/500KG 76.2 50.8 19.1 25.4 M12x1.75ï¼?1/2-20ï¼?
750/1000/1500KG 76.2 50.8 25.4 25.4 M12x1.75ï¼?1/2-20ï¼?
2000/3000/5000KG 108 76.2 25.4 25.4 M18x1.5ï¼?3/4-16ï¼?

Product Name:
S type Force Sensors

Features:
1. Miniature S type Tension Load Cells are small and it is easy to install them.
2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency.
3. The load cells are made of stainless steel and provide robust construction.
4. The load cells utilize strain gauge technology and provide high dynamic frequency

Applications:
Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc.

Technical Specification:

Capacity
50kg,100kg,200kg,300kg,500kg
Rated output
2.0mV / V
Zero balance
± 2 % F.S.
Non-linearity
0.1 % F.S.
Hysteresis
0.1 % F.S.
Repeatability
0.1 % F.S.
Creep (30min)
0.1 % F.S.
Temp. effect on output
0.05 % F.S. / 10ºC
Temp. effect on zero
0.05 % F.S. / 10ºC
Input impedance
1100±5Ω
Output impedance
1050â±3î©
Insulation
Â?¥5000mî©/100vdc
Recommended Excitation
10 V
Maximum Excitation
20 V
Compensated Temp Range
- 10 ~ 60 ºc
Operation Temp Range
- 20 ~ 80âºc
Safe Overload
150% F.S.
Ultimate Overload
200 % F.S.
Cable Size
Ã?3ã?3m
Wiring Connection
Red: + Excitation Black: - Excitation

Green: + Signal White: - Signal




Range, Size, Thread
Lb, Kg, A, B, C, Mm, Inch
250-150, 100-750, 70, 19, 80, M10*1.5, 1/2-20
2000-3000, 1000-1500, 70, 25, 80, M12*1.75, 1/2-20
5k-10k, 2000-5000, 108, 25, 95, M18*1.5, 3/4-16
20000, 10000, 175, 51, 130, M30*2, 11/4-12
40000, 20000, 190, 60, 160, M39*2, 11/4-12

Detailed Product Description

Dynamic Wireless Portable Axle Truck Vehicle Scale with 1 weighing pad
Advantage:
Language, printing list can be customized.
Strong weighing pad with fixing screws

Digitization menu,easy operation
RS232 port is used to communicate with PC
Floating technology is adopted to remove zero drift
Ultra-high frequency ensures better anti-electromagnet ability
Vehicle axle weight is measured axle by axle, and the max number is unlimited
Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization
AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off


Parts:
1. PT-40H
Aluminum-alloy; Ultra-thin weighpad design: Easily mounted/unmounted slope; Hermetically sealed, suits different environment; Works both dynamically and statically; Can be used to measure axle weight and whole vehicle weight when two or four weigh-padsare connected together.

portable axle truck scale Dynamic Wireless Portable Axle Truck Vehicle Scale with 1 weighing pad

2. Wireless Weighing Indicator

Dynamic Wireless Portable Axle Truck Vehicle Scale with 1 weighing pad Dynamic Wireless Portable Axle Truck Vehicle Scale with 1 weighing pad


Features
Excellent weighing function and high precision
Touch screen LCD Monitor
Backlight lattice LCD, Clear both in daytime and nighttime
Digital wireless technology is adopted, so the portability is largely increased
Ultra-high frequency ensures better anti-electromagnet ability
Double LCDs are used
Measure and display vehicle velocity(km/h)
Floating technology is adopted to remove zero drift
Numbered options
Vehicle axle weight is measured axle by axle, and the max number is unlimited
Wireless transmission removes cable connection
Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization
RS232 port is used to communicate with PC
Can conveniently input full vehicle license number with letters
Can put in the name of the testing organization and operators
Can store as many as 10000 vehicle testing records
Mature inquiry and statistic function
AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off
The auto power supply system can be used for providing electricity and charging
The instrument can work independently. And it also can upload testing data to computers

Detailed Product Description
ATS-1 Ionizing air nozzle /Anti-static nozzle/static conntrol nozzle/esd nozzle
It's a special fixed equipment to eliminate static electricity, it uses strong ion wind clear the surface electrostatic and foreign body, dust, it belongs to industrial category. The appearance design is suitable for automatically removing electrostatic dust removal device. It must be used with ATS 3000 high voltage power supply.
Working principle:

ATS-1 Ionizing air nozzle /Anti-static nozzle/static conntrol nozzle/esd nozzle can produce positive and negative charge with a lot of, the high-speed gas compression blow out, can be brought to the charge on the object and fall, when the object surface is negatively charged, it will attract positive charge in the air, when the object surface is positively charged, it will be a negative charge attract in the air flow, so that the static electricity on the surface of the object and, to eliminate the purpose of static electricity, high compressed air can also be the object on the stubborn dirt blown away, to neutralize electrostatic and dust objective.

Ionizing Air Nozzle /Anti-Static Nozzle/Static Conntrol Nozzle/Esd Nozzle features:
· Eliminate static quickly
· Ion airflow strongly
· Widely range of wind adjusting ( it need install control valve
· Good ground-connection protection
Mainly used in electronics, spraying, injection molding,injection molding etc.

Specification
Operating Voltage
Power Supply
4.6KV
(work with ATS-3001 power supply)
Current consumption
350μA
Operating Temperature
0â??-50â??
Weight
0.5kg
HV Cable length
3M
Operating air pressure
0.3mpa-0.7mpa
Operating Air velocity
10m/1sec

Test Results
Testing Voltage:1KV-100V ,Operating Voltage:4.6KV
Temperature:22â?? Humidity:60%±5
Distance
150mm
Decay time
Positive
0.6s
Negative
0.7s
Offset Voltage
�±25V

Product warranty and service
1.warranty
All the productâ??s warranty period is one year, since the date of sale quality problems caused due to product a year own part, material and process problems, we will repair free of charge.
2.After the warranty period of service
Where the company sells after warranty period still will be responsible to repair the product free in charge, in order to protect the interests of customers.
3.If customers open and repair ion fan themselves, Our company wonâ??t supply free warranty, according to the situation of discretion.

Why choose us:
ATSâ??s Qualification:
A. 10-yearâ??s experience in static industry.
B. Customers from more than 120 countries.
C. Successful cases from dozens of countries.
D. Professional team offers technical support to customers.
E. 24hours online serivces from our professional foreign trade department.
F. Our technicians go to different countries to help customers solve problems.
Choosing us, you will get not only the products, but also the better service, and better operating mode.