Ds1d shape edging/beveling machine applies to grinding and polishing for shaping peripheral and beveling edges of circular, ellipse and irregular flat glass, and also applies to semi-automatic grinding for circular and elliptical glass. Using different shaping grinding wheels can obtain the half- round, flat or og edges of glass. The grinding and polishing for bevel edges can be done by the means of adjusting angles of the grinding spindle and using the bowl-shaped grinding wheel
Technical data.
Glass table drilling machine (two drilling head) is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping different drilling bits. The machine is good for batch processing. Working efficient is high.
Technical data:
Distance between drilling head and supporting column:1345mm
Hole diameter:í=4mm-200mm
Glass process thickness:3mm-19mm
Power:4kw
Dimention:2500*2200*1600mm
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises.
Operate and maintain.
Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute.
Glass thickness is selected through a toggle switch linked to a servomotor and a digital display
The arris wheels automatically adjust with each thickness selected.
Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass.
The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually.
The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual.
All motors are supplied according to clientÆs request, transformers are not used.
Technical data
Min. Process size:120mm*120mm
Max. Arris angle:45¦
Glass process thickness:3mm-28mm
Process speed:1.0-5.0m/min
Spindles:9
Power18.5kw
Overall dimension:6900*1200*2520(mm)
Weight:2750kgs
Insulating glass machine, insulating glass machines, insulating glass machinery, insulating glass line, insulating glass equipment, insulating glass equipments
Shape glass low-e insulating glass production line
Automatic control for low-e glass (2-brush treatment for low-e)
Automatic adjust function for pressing with hydraulic compression
Titling table with hydraulic pressure
Monitor using system temperature/speed/production volume
Mechanical trouble cheek
Whole line control function with 1 monitor
Technique parameter
Max. Glass size 2500f¯3500mm
Min. Glass size 300f¯500mm
Glass thickness 3-50mm
Thickness of washing glass up to 60mm
Max.In washing section 12m/min
Max.In accelerating 50m/min
Brush 4pair(low-e)
Power voltage 3p 41.5kw(380v)/50-60hz
Size of line 25000f¯2560f¯3380mm
Power rate 20.6kw
Functions characteristics:
Low-e insulating glass production line
Automatic control function for low-e glass
It is transmitted by a wheel, steadily and reliably
Automatic adjust function for pressing with hydraulic compression
Tilting table with hydraulic pressure
Monitor using system temperature/speed/production volume
Mechanical trouble cheek
Whole line control function with 1monitor
Technique parameter:
Max .Glass size 1800íß2500mm
Min .Glass size 300íß500mm
Glass thickness 3-50mm
Thickness of washing glass up to 50mm
Max.In washing section 12m/min
Max.In accelerating 50m/min
Brush 3pair(low-e)
Power voltage 28kw(380v)/50-60hz
Size of line 15600íß2350íß3000mm
Power rate 20kw
5000kg
Functions characteristics:
The production line is composed of glass transporter, automatic glass scavenging dehydrator, glass inspection transporter, automatic aluminum frame locating machine, glass reversible transporter, binding machine butyl extruder machine, bicomponent rubber beating machine molecular sieve bottler, and rotaiy rubber-spreading machine. The production line is composed of flat press mode which is quite popular in the world production of hollow glass. The automatic flat press machine has a unique designation of two boxes to enable the two pieces of glass binding into on one time. It is also suitable for production hollow glass of different size, shaped hollow glass and glass curtain walls.
Technique parameter:
Max .Glass size 1600íß2000mm
Min .Glass size 300íß500mm
Glass thickness 3-25mm
Thickness of washing glass up to 50mm
Working speed 12m/min
Brush 2pair(low-e)
Power voltage 22kw(380v)/50-60hz
Size of line 12000 multiply1250 multiply2600mm
Power rate 11kw
Functions and characteristics:
This line is specially designed for producing the slot-alum insulating glass .It includes vertical washing drying machine roll-pressing machine and can accomplish the double glazingí»s washing drying auto-assembling, auto-roll-pressing and smooth shifting out. It features high efficiency, low power, and energy-saving, less space using and easy operation.
Technique parameter:
Max .Glass size 1600íß1800mm
Min .Glass size 300íß500mm
Thickness of washing glass up to 50mm
Working speed 2-10m/min
Power voltage 380vac
Size of line 11500íß1250íß2600mm
Power rate 11kw
Functions characteristics:
Plc man-machine interface display screen switches and pilot light are all imported.
Automatic starting, suspending and stopping.
Washing-conveying mechanism is upward.
Drying conveys by wheel.
Inspecting glass cleaness.
Washing-conveying starts together by the foot control and hand control.
Automatic glass and alum-frame locate, as well as the assembling.
Automatic implemention of the roll-pressing procedure.
Glass-rotation can be made automatically or by hand.
Auto-heating for the washing water according to the season changing.
Supervision by man-machine interface display screen.
Technique parameter:
Max .Glass size 1800íß2500mm
Min .Glass size 300íß500mm
Glass thickness 3-50mm
Thickness of washing glass up to 50mm
Working speed 12m/min
Brush 3pair(low-e)
Power voltage 28kw(380v)/50-60hz
Size of line 15000íß2350íß3000mm
Power rate 12.8kw
We provide two series of laminated machine. Lm-af-t is a tilting design and lm-af-c a chamber design.
Lm-af series
Characteristic
1. Laminated glass is made in this machine. No autoclave or roller press is required. The laminated glass made from this machine is finished product.
2. Vacuum rubber ring and vacuum rubber bag are not required. For details, please refer to the technical description of each model.
Type of glass to be made
This machine is used to make different type of laminated glass such as,
1. Laminated glass for decorative and architectural purposes.
2. Polymer dispersed liquid crystal (pdlc) panel which is transparent allowing light passing through when voltage applied and opaque when voltage shut off.
Eva interlayer film
The laminated glass made out of this machine requires no pvb. Instead, a special interlayer film eva is used to bind the glass. Not like pvb, eva film is easy to be handled such that it requires no control in temperature and humidity. Hence, no assembly room is needed and thus, air-conditioner and de-humidifier are not required. The laminated glass can be made from one piece of eva film such that excellent anti-penetration strength is obtained without any glass fragmentation in case the laminated glass is broken accidentally.
Glass Straight Line Edging Machine is suitable for grinding flat edge with arrises of different thickness and size glass. Equip with nine bowl or cup shape special purpose wheels, five for flat edge, and four for arrises. The grinding and polishing of flat edge with arrises are finished at one processing
Main functions:
1. This machine has the self- diagnosis function, which is easy for check the error.
2. The machine has automatic and the manual two operating modes. They are more convenient and succinct;
3. It adopts the multistage frequency conversion control and multi-speed revolution optimization function and it can realize each kind of size glass movement automatically.
4. Every transportation partial adopts stops the cushion function, which can avoid phenomenon which appears the glass and the equipment localization occurs dashes. And effectively reduces the glass to transport a turn of attrition.
5. Adopt the electricity saving pattern, when the conveyer puts in the glass which can automatic start. It doesnf+t have the glass time delay automatic shut-off, saves the power consumption.
6. Air blowers adopts graduation time delay starter, effectively avoids the initial firing current oversized phenomenon.
7. Cleaning dryer and the water tank was made by stainless steel processing manufacture, transmits the roller for to bear the acid and alkali rubber roller, according to the glass thickness transmission roller spacing may the automatic control.
8. Inspections transmissions and the aluminum frame assembly machine adopt the double fast transmission, highly effective energy conservation May realize automatic processing to the ultra long glass, three glass and the size piece glass. (This item for specially request)
9. The press panel board of panel pressure board adopts to imported osculum, the press system and panel press system are controlled by the Servo motor system·+screw convey·¼, which guarantee the two pieces glass press together safely and steadily and the processing accuracy.
It is machine to adjust the mixing of pu, polysulphite and silicone type materials. This operating system is especially designed for the insulating glass production and improved.
This machine can also be used as filling the cartridges by only releasing the mixing system. The mixed material can also be taken out of the gun. System works hydraulically and b component may work pneumatically if required.
How to introduce the materials:
A and b components seperately handled by the hydraulic system pumps. When the material is reloaded, it is necessary to empty the air inside the machine. Besides, time heaters available on specific parts to avoid the improper working under cold weather conditions.
Mixing ratio:
A and b component can be controlled seperately by either hydraulic system or dosing pump. The adjustment can be made as desired by any ratio figures are between 1:6 and 1:16
Mixing system:
The mixers by the end of the extension output hoses mixes the materials homogenously and completely.
Cleaning:
It is necessary to clean and maintenance the machine after long periods of idle being of production. When the mixed material is forgotten inside the machine for a period of time, machine itself warns by the use of alert lamp. B component key is switched to the opposite direction allowing the by-pass system to fill the mixers with a component and so unwanted freeze can be avoided.
Technical specifications:
Mixing ratio: 1:6 / 1:16
Material output: approx 2.7 kg./min. Which may deviate according to material used
Operating system: hydraulics ( a ve b compenant. B component may be pneumatic.)
Operating pressure: between 250 - 450 bar
Air pressure: max. 6 bar
Power supply: 3 kw (380 v 59 hz.Expect the heaters)
Controlling system: plc controlled
Weight: 685 kg.
Dimensions: 1700 x 1050 x 100 mm
Weight: 685 kg.
Dimensions: 1700 x 1050 x 100 mm
In wooden case
Frb xl royal bevelling and grinding machines are designed for your supreme comfort and safety for round and irregular shaped glass cuts.
The bevelling and grinding of the round glass and mirrors automatically achieved with a tolerance of +-0.1 as to the requested measures.
Copying thru the glass shape itself semi-automatically does the bevelling and grinding of the oval glass and mirrors.
The oval glass and mirrors smaller than 550 mm diameter are bevelled and grinded by the use of the additional plate attached. The rotational speed of the plates electronically adjusted either from diamond attachment hear or control panel. The meters at the diamond head makes the operation comfortable.
Features:
Glass thickness : 3 to 30 mm
Grinding : 150 - 2200 mm
Bevelling : 150 - 2400 mm
Operating types : manual but automatic at oval and circular glass
Diamond wheel diameter (grinding) : 100 - 150 mm
Diamond wheel diameter (bevelling) : 150 mm
Head inclination : 0 - 15
Diamond wheel stroke : 50 mm
Bevelling width : 5 - 60 mm
Bevelling types : vertical and various edges
Technical specifications:
Type : frb xl royal
Operating area : 3500 x 3500 mm
Engine power : 4.15 kw
Engine rpm : approx. Bevelling 2500 rpm, grinding 5000 rpm
Weight : 670 kgs.
Glass-lined reactors are used worldwide, in very severe environments in chemical industries as well as for the glass layer sanitary properties in pharmaceutical industries.
The requirements for glass-lined reactors are reliability, safety, flexibility, efficiency, cost effective operation and availability for industrial processes.
The furnace includes loading table, heating section , quenching and cooling section, unloading table, and control system. It is used to manufacture flat and bending tempered glass for furniture, home appliance, architecture glass, etc.
