Find Verified Fresh White Onion Suppliers, Manufacturers and Wholesalers

Chemical Name : Mono Potassium Phosphate
Other Names : Potassium Dihydrogen Phosphate, MKP
Chemical Formula : KHPO
CAS No. : 7778 - 77-0
Appearance : White crystalline powder or granules

For pharmaceutical intermediates
2-Cyanophenol
Product name 2-Cyanophenol CAS NO.: 611-20-1
MF: C7H5NO
Structural type:
Properties: Grayish white to light brown powder.Items Specification
Appearance White or off white powder
Salicylnitrile content, % 98.0
Salicylamide content,% 0.5
water content,% 0.5

Custom Liquid filled Solar Inverter Step up Oil-Immersed Transformer for photovoltaic power plants includes hermetically sealed, amorphous alloy, conservator type and on-load tap changer type, which is usually pole mounted or installed in distribution station for daily lighting and factory power whose LV output up to 0.4kV. Our distribution transformer rating is up to 2500kVA, and primary voltage up to 35kV. The corrugated tanks as thermal expansion and contraction component enable the transformer oil completely isolated with the atmosphere. Oil distribution transformer with primary voltage range of 6,10,10.5,11,20,22,24,33, 35,38.5kV can be manufactured according to customer requirements.

Aviation turbine engine base lubricating oil (synthetic oil) is a high-performance lubrication base component specially designed for turbine engines (turbojet, turbofan, turboprop, turboshaft). It must pass rigorous certifications such as MIL-PRF-23699 (US military standard), MH/T 6084 (civilian standard), and GJB 135A (national military standard). Its core function is to lubricate bearings/gears, dissipate heat, prevent coking and corrosion, and ensure the stable operation of the engine under extreme conditions ranging from -60to 246.

Grade C NitrocelluloseCellulose nitrate CAS 9004700

Nitrocellulose is a white odorless and odorless solid Celluloid plastic is a thermoplastic material containing 20 camphor plasticizer It softens significantly at 80 can be molded and processed at 110125 and can self ignite above 165 Transparent soft with high mechanical strength and low water absorption No deformation and no white spots in boiling water for 2 minutes Stable to water and general dilute acid solutions can be corroded by dilute alkaline solution partially soluble in benzene and dichloroethylene and soluble in solvents such as ethanol and ethyl acetate

Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls triangular plates pen holders eyeglass frames toys and umbrella handles and tool handles in daily necessities Nitrocellulose can also be used as a fiber adhesive coating and substrate material

This product is nontoxic This product belongs to Class A flammable dangerous goods Packaged in wooden boxes with plastic bags lined inside Each box should not exceed 160kg or packaged according to user requirements There should be a flammable mark on the outside of the box Storage should be placed in a dry ventilated and clean warehouse away from heat sources and direct sunlight It should not be stored together with acidic self igniting and explosive materials It is strictly prohibited to approach open flames Transportation should be protected from sunlight and rain and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods

CN is fully kneaded with plasticizers such as camphor solvents alcohol dyes or pigments in a kneading machine at 36 and then filtered in a pressure filter at 60 The filtered material is rolled on a two roller rolling machine and the resulting thin sheet is crushed dried flattened or polished to obtain sheetlike CN plastic The rolled thin sheet can also be placed into an extrusion machine to form a tubular object

Application of nitrocellulose
Nitrocellulose, also known as cellulose nitrate or nitrocellulose, is an organic polymer compound with the chemical formula (C6H7N3O11) n. It is the product of the esterification reaction between cellulose and nitrate, usually in the form of white or slightly yellow cotton fluff, insoluble in water, but soluble in organic solvents such as esters and acetone
Nitrocellulose, also known as cellulose nitrate ester, abbreviated as NC, commonly known as nitrocellulose, is the product of the reaction between cellulose and nitrate. Nitrocellulose made from cotton fibers is called nitrocellulose. Nitrocellulose is a white fibrous polymer that is resistant to water, dilute acids, weak alkalis, and various oils. Different degrees of polymerization result in different strengths, but they are all thermoplastic substances. Easy to change color under sunlight and highly flammable. Attention should be paid to safety in production, processing, packaging, storage, transportation, sales, and use.

Centralite I (Diethyl diphenyl urea

It is used as stabilizer production of Intermediates of organic chemicals.

Stabilizers for the production of propellants and nitrocellulose.

Centralite II (Dimethyldiphenylurea)

It is used as stabilizer. production of Intermediates of organic chemicals.

Stabilizers used for manufacturing propellants and nitrocellulose.

the Family tent has 16 m2 main floor area, plus two 3.5 m2 vestibules, for a total area of 23 m2, double-fold with ground sheet.

It is the standard tent used by UNHCR/ICRC/IFRC and suitable for a family of5 people, following the recommended minimum living area in hot and temperate climates (3.5 m2 per person), and providing additional space for cold climates.

The technical specifications of this tent were developed by shelter specialists, with close technical cooperation between UNHCR, IFRC and ICRC, to guarantee a product fit for human use in all climates, with appropriate outdoor life span, at a minimum cost.

The technical specifications of this tent are generic, ensuring that the product can be manufactured by different suppliers in various countries, with the common technical know-how and standard equipment from the tent industry.

Agricultural urea N46 46%


Properties of urea
Urea, also known as carbamide, carbamide and urea. Pure urea is white, tasteless, odorless, needle shaped or prismatic crystal, with a melting point of 132.7 under normal pressure. It is hygroscopic, deliquescent, hydrolyzable, and weakly alkaline. It is made into compound fertilizer with acid fertilizer. Urea is an organic compound composed of carbon, nitrogen, oxygen and hydrogen. It is a white crystal. Urea is one of the simplest organic compounds. The most important use of urea is as fertilizer. Its nitrogen content is more than 46%. After being converted into ammonium carbonate in soil, urea is hydrolyzed and absorbed by plants. It is the nitrogen fertilizer with the highest nitrogen content at present.
Molecular formula of urea: CO (NH2) 2, molecular weight 60.06, density 1.335g/cm The melting point is 132.7. Soluble in water and alcohol, insoluble in ether and chloroform. It is slightly alkaline. It can react with acid to form salt. It has hydrolysis. Condensation reaction can be carried out at high temperature to produce biuret, triuret and cyanuric acid. Heat to 160 and decompose to generate ammonia gas and turn into cyanic acid at the same time. Urea can be hydrolyzed into ammonia and carbon dioxide under the action of acid, alkali and enzyme (acid and alkali need to be heated). Unstable to heat, heat to 150 160 to deamination to biuret. Urea is easily soluble in water, 105g can be dissolved in 100ml water at 20 , and the aqueous solution shows neutral reaction. There are two kinds of urea products: crystalline urea is white acicular or prismatic crystal with strong hygroscopicity; Granular urea is a translucent particle with a particle size of 1~2mm, which has a smooth appearance and improved moisture absorption.
Urea is a physiologically neutral fertilizer, which does not leave any harmful substances in the soil and has no adverse effects after long-term application. However, a small amount of biuret, also known as biuret, will be produced when the temperature is too high during granulation, which has an inhibitory effect on crops. Urea is molecular before conversion and cannot be adsorbed by soil, so it should be prevented from being lost with water; The ammonia formed after conversion is also volatile, so urea should also be deeply covered with soil. Urea is the first synthetic organic substance and widely exists in nature, such as 0.4% urea in fresh human feces.

The new version of national standard GB/T2440-2017 for urea has been officially implemented since July 1, 2018. Compared with the replaced 2001 standard, certain adjustments have been made.
New standard GB/T2440-2017

White crystalline powder, high-purity stabilizer for propellants and explosives.

Effectively absorbs nitrogen oxides, inhibits thermal decomposition of nitrate esters, and extends storage life.

Features good compatibility, high thermal stability and low sensitivity. Widely used in double-base propellants, nitroglycerin explosives and pyrotechnics.

For pharmaceutical intermediate
2-Cyanophenol
Product nameï¼?2-Cyanophenol CAS NO.: 611-20-1
MF: C7H5NO
Structural type:
Properties: Grayish white to light brown powder.Items Specification
Appearance White or off white powder
Salicylnitrile content, % 8.0
Salicylamide content,% 0.5
water content,% 0.5

CAS·:57-13-6 Urea for vehicles, agricultural urea, urea N46
When the temperature of urea is below 20 and the relative humidity is below 70%, it will not only not absorb moisture, but also evaporate water and reduce its water content; When the temperature exceeds 20 �¢?? and the relative humidity is higher than 80%, it starts to absorb moisture, and becomes paste when it is serious. When the air is dried again, it will re agglomerate, which is only inferior to ammonium nitrate. When the urea aqueous solution is at 80 �¢??, hydrolysis and decomposition reactions will occur, forming ammonium carbamate, ammonia gas and carbon dioxide respectively. Under acid and alkaline conditions, urea will decompose faster when it is heated. Urea is easy to combine with straight chain carbohydrates to form crystalline additional compounds; It forms a variety of double salts with various inorganic compounds, such as Ca (NO3) 2 �?�· 4CO (NH2) 2, NH4Cl �?�· CO (NH2) 2, CaChemicalbookSO4 �?�· 4CO (NH2) 2, MgSO4 �?�· 4CO (NH2) 2 �?�· 3H2O, Mg (NO3) �?�· 4CO (NH2) 2 �?�· 2H2O, etc; It is easy to form urea phosphate, dicalcium phosphate and water with monocalcium phosphate, namely Ca (H2PO4) 2 �?�· H2O+CO (NH2) 2 �¢?? H3PO4 �?�· CO (NH2) 2+CaHPO4+H2O; With nitric acid, it is easy to form urea nitrate, CO (NH2) 2+HNO3 �¢?? CO (NH2) 2 �?�· HNO3, which combines and relaxes the two; It can combine with formaldehyde to form urea formaldehyde compounds (uric acid rubber shrinks), in which the higher proportion of formaldehyde is urea resin, and the lower proportion is slow-release (effective) urea.

Gallium metal with a content of 99.99% (also known as Ga-4N) is a common high-purity specification, widely used in fields such as electronics, semiconductors, LEDs, solar cells, and optical materials. It is prepared through purification processes such as acid washing, alkaline electrolysis, or zone melting, and serves as an intermediate product for the preparation of ultra-pure gallium (such as over 99.9999%). Its core characteristics are its low melting point (<30) and excellent thermal and electrical conductivity.

Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 �¢??) and heavy diesel (with a boiling point range of about 350-410 �¢??). Widely used in large vehicles, railway locomotives, and ships.
The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.

Nitrocellulose is a white, odorless, and odorless solid. Celluloid plastic is a thermoplastic material containing 20% camphor plasticizer. It softens significantly at 80 , can be molded and processed at 110-125, and can self ignite above 165 . Transparent, soft, with high mechanical strength and low water absorption. No deformation and no white spots in boiling water for 2 minutes. Stable to water and general dilute acid solutions, can be corroded by dilute alkaline solution, partially soluble in benzene and dichloroethylene, and soluble in solvents such as ethanol and ethyl acetate.

Method of production

Nitrocellulose is a mixture of acid that nitrates cellulose, undergoes acid removal, pre washing, boiling, washing, dehydration, and then uses alcohol to remove water, resulting in nitrocellulose containing alcohol.

purpose

Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls, triangular plates, pen holders, eyeglass frames, toys, and umbrella handles and tool handles in daily necessities. Nitrocellulose can also be used as a fiber, adhesive, coating, and substrate material.

Security

This product is non-toxic. This product belongs to Class A flammable dangerous goods. Packaged in wooden boxes with plastic bags lined inside. Each box should not exceed 160kg, or packaged according to user requirements. There should be a "flammable" mark on the outside of the box. Storage should be placed in a dry, ventilated, and clean warehouse, away from heat sources and direct sunlight. It should not be stored together with acidic, self igniting, and explosive materials. It is strictly prohibited to approach open flames. Transportation should be protected from sunlight and rain, and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods.

Forming processing

CN is fully kneaded with plasticizers (such as camphor), solvents (alcohol), dyes (or pigments) in a kneading machine at 36, and then filtered in a pressure filter at 60 . The filtered material is rolled on a two roller rolling machine, and the resulting thin sheet is crushed, dried, flattened, or polished to obtain sheet-like CN plastic. The rolled thin sheet can also be placed into an extrusion machine to form a tubular object.

1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.

Picking date:sep. 2016
Origin: qingdao, shandong
Current packing: 4kgs/ctn
Packing oem advailable, if quantities good.
High quality, fresh, extra fancy & best flavor

Origin: anyue(anyue is the beggiest lemon base in china)
High quality, favourable price
Packing: normal packing or oem available

1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.

FFA : Max 2Pct
Moisture and Impurites : Max 0.5 pct
Iodine Value : Min.70
Acid Value : Max 1.0 Mg KOH/G
Peroxide value : Max 2.0 Mg KOH/G
Salmonella and Shigelia : ABsent


21Mt in 20'fcl,flexi tank
50kg/bag
20kg/carton

Brand
Ultrafire
Model
504b
Emitter brand
Mc-e
Light color
Warm white
Total emitters
1
Battery configurations
1 x 18650/2 x 16340 rechargeable battery (not included)
Voltage input
3.0-18v, 18v max.
Switch type
Clicky/clickie
Switch location
Tail-cap
Modes
1
Circuitry
Digital regulated 1800ma current output
Runtime
1 hour (manufacturer rated)
Lens
Coated glass lens
Reflector
Aluminum textured/op reflector


1 x led flashlight

dehydrated garlic powder, mainly exporting dehydrated garlic powder, pepper powder, and onion powder. Our factory specializes in the production of dehydrated garlic powder, pepper powder, and onion powder. With a professional production team and equipment, we can produce different grades of products according to customer needs. If you have purchasing needs, please reply to us for detailed consultation, and I will give you a detailed quotation.
MOQ:1000KG

We supply high-quality, farm-fresh Indian table potatoes available in Grade A and Grade B, ideal for both domestic markets and international exports.
Our varieties include:

Jyoti: Smooth skin, long shelf life, ideal for exports

Chandramukhi: White flesh, firm texture, popular in Asian markets

Pokhraj: Golden yellow flesh, high starch, perfect for chips and fries

Potatoes are sourced directly from our network of farms in India, ensuring freshness, proper sizing, and safe packaging.

Grades Available: A (40mm-60mm), B (25mm-40mm)

Packaging: 10kg / 25kg / 50kg Mesh or Jute Bags (Customizable)

Loadability: ~28 tons per 40 ft container

Origin: Punjab / West Bengal / Bihar (India)

Shelf Life: 30-60 days under proper storage

Moisture:

7-dimethyladamantane
Mp:194-195ípc
White solid
Content:98.0%min.


1mg to 200kg.

1, 3-diaminotricyclo[3, 3, 1, 1(3, 7)]decane
1, 3-tricyclo[3, 3, 1, 1(3, 7)]decanediamine
White solid
Purity:98.0%min.

Size: 410mmx530mm
Thickness: 3.0-6.0mm
Weight: 3.48kg/set(including 2 steel brackets, 2 gas- pistons and screws)"
Finishing:Powder-coating
Color: Black (customized color acceptable)
Standard Package: One set into a poly bag, one ploy bag into a carton. And 4320 ctns a container.
Packing size: 73*14*5.5cm

The special price USD5.80 per box of 50 masks for 3-Ply Disposable Civil Face Mask.

3-Ply Disposable Face Mask with Ear Loop for adult and kids.(1st-Ply: blue non-woven fabric;
2nd-Ply: melt blown fabric;
3rd-Ply: white non-woven fabric),CE.

KN95 for adult and kids, CE,FDA

We have 1000 production lines, and can product 4,000,000 pieces every day.

Potato Chips Production Line Description:

This semi-automatic Potato Chips Production Line in low price is specially designed for small and medium scale potato chips manufacturers. We offer three different models(50 kg/h, 100 kg/h, 200 kg/h) for various potato chips sellers. Semi-automatic potato chips line can be applied in grocery, retail store, supper market, restaurant, etc. Semi-automatic potato chips processing line has the similar functions as fully-automatic potato chips production line, while manual potato chips line has much lower price and is specially suitable for small scale potato chips manufacturers. Three different yield potato chips processing lines enjoy high praise in our customers. Smallest potato chips production line with 50 kg/h yield is best for super market or food retailer store. Potato chips business is the most-lasting business now and forever.

Potato Chips Production Line product process:

Potato washing and peeling --- potato chips(slices) cutting -- potato chips(slices)blanching -- potato chips(slices) dewatering -- potato chips( French fries) frying -- potato chips( French fries) de-oiling -- potato chips( French fries) flavoring -- potato chips( French fries) packing

Potato Chips Production Line technical data:
1.Model:AST-100
2.Capacity:100kg/h
3.Power:61.2kw
4.Frying time: 6 minutes
5.Frying temperature: 180degree
6.Blanching time: 7-15 minutes
7.Blanching temperature: 70degree

This French Fries Chips Line is specially designed for small and medium scale French Fries Chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

Specification
appearance white crystalline powder
total alkalinity (as NaHCO3) 99.0%-100.5%
loss on drying 0.2%max
pH value (10g/L solution) 8.5max
ammonium salt pass the test
clarity pass the test
chloride (as Cl) 0.4%max
whiteness 85min
As 0.0001%max
heavy metal (as Pb) 0.0005%max
Packaging
in 25kg PP/PE bags without pallet

1-hydroxy-3-amino-5
Cas:63971-25-5
White power
Content:98.0%min.

Material: Plastic PP
Size: 47cm*20cm*15cm
Weight: 1.095kg
Capacity: 14L
Color: White+semi-transparency
Packing: PE b

Description:
The rice mill model 6NPF-10 is a machine that can separate the rice from its chaff at one time. After blowing away the chaff, the air inside the miller gets into the grinding chamber which improves the grinding condition and reduces broken rice rate and internal temperature. Thus the rice produced is white, smooth and glittering.The machine comprises of two types in rice and chaff separating, which are four-level separating and three-level separating. As to 4-level separating, a dust collector is installed on the blower exit. When the grain is grinded, white rice will flow out from the top of the separator, the broken rice will flow out from the bottom, the rough chaff flows out from the chaff output slot and the fine chaff flows out from the dust-collector. Thus the white rice, broken rice, rough chaff and fine chaff are separated.

Main features:

light weight
small volume and working area
easy to be moved
motor drive or engine drive optional

Technical parameters:

Dimensions 304 264 68 (mm)
Flame retardant abs material shell white shell
White oval lamp flame-retardant casing material, transparent pc cover
Mount installation
The main electric power supply 220v 50hz
The main electric power 1.8w
Source type 2 6v 0.3a incandescent bulbs, 2 1.8w
Standby power supply 6.0v, 1200mah Ni-Cd battery
Emergency response time 90min
Charging time 20h
Conversion time 0.25s
Non-continuous mode
Ambient temperature -10 - 50
Relative humidity Rh 95%

1-adamantanediamine dihydrochloride
Tricyclo[3, 3, 1, 1( 3, 7)]decane-1, 3-diamine dihydrochloride
Cas: 26562-81-2
White solid
Purity:98.0%min.

1-actamido-3
N-(3, 5-dimethyl-1-adamantyl)-acetamide
Cas:19982-07-1
White solid
Mp:110-111 ¦c
Content:98.0%min.


1mg-100kg.

This Frozen Frechn Potato Chips Line is specially designed for small and medium scale French Fries Chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This Semi Automatic Potato Sticks Plant is specially designed for small and medium scale potato Sticks manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This Plantain Processing Machine is specially designed for small and medium scale potato chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This Automatic Potato Chips Cutting Machine is specially designed for small and medium scale potato chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This potato crisps line in low price is specially designed for small and medium scale potato chips manufacturers. We offer three different models(50 kg/h, 100 kg/h, 200 kg/h) for various potato chips sellers. Semi-automatic potato chips line can be applied in grocery, retail store, supper market, restaurant, etc. Semi-automatic potato chips processing line has the similar functions as fully-automatic potato chips production line, while manual potato chips line has much lower price and is specially suitable for small scale potato chips manufacturers. Three different yield potato chips processing lines enjoy high praise in our customers. Smallest potato chips production line with 50 kg/h yield is best for super market or food retailer store. Potato chips business is the most-lasting business now and forever.

Data needed for Semi-automatic potato chips plant
Model : 50kg/h
Ratio of raw material and finishing product: 3~3.5:1
Oil Consumption : 2kg/h
Water Consumption : 0.05 CBM/H
Workers Needed : 6-8persons
Space Needed: 60 square meters(machine can be turned around)

This semi-automatic potato crisps line in low price is specially designed for small and medium scale potato chips manufacturers. We offer three different models(50 kg/h, 100 kg/h, 200 kg/h) for various potato chips sellers. Semi-automatic potato chips line can be applied in grocery, retail store, supper market, restaurant, etc. Semi-automatic potato chips processing line has the similar functions as fully-automatic potato chips production line, while manual potato chips line has much lower price and is specially suitable for small scale potato chips manufacturers. Three different yield potato chips processing lines enjoy high praise in our customers. Smallest potato chips production line with 50 kg/h yield is best for super market or food retailer store. Potato chips business is the most-lasting business now and forever.

50kg Semi-automatic Potato Chips Plant
The 50kg semi-automatic potato chips plant is suitable for starters. As a supplier of high quality potato chips machinery, we can not only offer professional market analysis reports, but also provide solutions for customers.

Data needed for Semi-automatic potato chips plant
Model : 50kg/h
Ratio of raw material and finishing product: 3~3.5:1
Oil Consumption : 2kg/h
Water Consumption : 0.05 CBM/H
Workers Needed : 6-8persons
Space Needed: 60 square meters(machine can be turned around)

This French Fries Chips Making Machine is specially designed for small and medium scale French Fries Chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree