Find Verified Fresh Lamb Suppliers, Manufacturers and Wholesalers

Silica Sand for Artificial Grass
Cairo Minerals Offer High Graded and processed and sieved silica sand for artificial grass , which is natural grains, Silica sand is processed in our own screening plant after Extracting and transported to our site for screening, in our site we can grade and meet all required practical sizes according to FIFA.
The silica sand for artificial grass has become Hot Request in the last 5 years which means high World production of artificial grass,
and replaces natural grass.
FIFA has Encouraged and Recommended using Artificial grass instead of Natural grass,
for that Reason Silica sand has been ordered from many buyers,
included football federation, individual companies, Sports Clubs, landscaping, Houses.


Silica sand is used for Artificial Grass and football pitches,
beach volleyball, tennis court, tennis soccer.
What is common sizes of silica sand are normally used in filling artificial grass?
The sand is used for both tennis and football artificial turf and therefore 2 different granulation are used:
1. Tennis: sand 0,4-0,8 mm (should not exceed 1,00 mm in any case).
2. Football: 0,5-1,25 mm (should not exceed 1,50 mm in any case).

Generally, the silica sand granulation depend on the density of the synthetic grass, when the grass is quite dense ( more than 45000 stitches) we have to use the smaller granulation ( 0,5-0,7 mm) so that the sand can be placed into the grass pile when the grass is very dense, the sand cannot be placed inside In case of lower density ( soccer around 10 000 stitches), you can easily install the bigger granulation, but never higher then 1,5 mm ( even though some companies install even bigger but it is not according to any standards or international requests).

What is common sizes of silica sand are normally used in filling beach volleyball?
Silica Sand for beach volley, normally here simply use the Sand from the beach on seaside (I suppose that should be the same granulation as for football synthetic grass).

What is common sizes of silica sand are normally used in filling tennis court and tennis soccer?
I already explained above for both soccer and tennis.

How much quantity of silica sand can be filled per square meter?
As said earlier, always depending on the density of the grass and its height, we install different quantities.
For tennis, we install 12 kg/sqm on very dense and short grass (11 mm) and for less dense tennis grass with higher pile we install sometimes 25-30 kg/sqm.
For soccer, the things are more clear, we install from 18-25 kg/sqm, depends on the grass height.

Cairo Minerals Offer High Graded and processed and sieved silica sand for artificial grass , which is natural grains, Silica sand is processed in our own screening plant after Extracting and transported to our site for screening, in our site we can grade and meet all required practical sizes according to FIFA.

The silica sand for artificial grass has become Hot Request in the last 5 years which means high World production of artificial grass, and replaces natural grass.

FIFA has Encouraged and Recommended using Artificial grass instead of Natural grass, for that Reason Silica sand has been ordered from many buyers, included football federation, individual companies, Sports Clubs, landscaping, Houses.

Silica sand is used for Artificial Grass and football pitches,
beach volleyball, tennis court, tennis soccer.
What is common sizes of silica sand are normally used in filling artificial grass?
The sand is used for both tennis and football artificial turf and therefore 2 different granulations are used:
1. Tennis: sand 0,4-0,8 mm (should not exceed 1,00 mm in any case).
2. Football: 0,5-1,25 mm (should not exceed 1,50 mm in any case).

Generally, the silica sand granulation depend on the density of the synthetic grass, when the grass is quite dense ( more than 45000 stitches) we have to use the smaller granulation ( 0,5-0,7 mm) so that the sand can be placed into the grass pile when the grass is very dense, the sand cannot be placed inside In case of lower density ( soccer around 10 000 stitches), you can easily install the bigger granulation, but never higher then 1,5 mm ( even though some companies install even bigger but it is not according to any standards or international requests).

River Sand for Construction

River Sand is a naturally occurring granular material composed of finely divided in natural quarries and mineral particles, If you want get river sand price please contact us.

The composition of sand is highly variable, depending on the local quarries sources and conditions. (Silicon dioxide or SiO2)

What Is Shape and Color of River Sand Construction Sand? River sand, Cairominerals Export River sand, we sell River sand, We Export River sand, River Sand Specification
Construction sand is rounded, bright yellow and sometimes off white.

How can we find River Sand Construction Sand?
River Sand Construction Sand is available either in River or in old Ancient Quarries since thousands of years.

Does River Sand Construction Sand in Loose Grains or in crushed Sand Stones?
River Sand Construction Sand is available in loose grains.

Processing of River Sand Construction Sand is normally by Excavators and Wheel Loaders or by Explosion?
Processing is easily by normal machines without using and Explosion materials or any Crushing machines.
River Sand, Export River Sand, Sell River Sand, River Sand For Building, River Sand For Plastring
How much is Reserve of River Sand Construction Sand can we imagine to be found in Egypt?
High and Huge Reserve is available in Egypt can match long term contracts.

What is anthracite ?

Anthracite is a raw material for water purification as filter media. Anthracite has features of low ash, Sulphur, phosphorus and high calorific power, mass resistivity, percentage of lump coal, chemical activity, recycle rate of head coal, mechanical strength as well as enjoying trait of innocuity, in dissolvableness in acidic, neutral, alkaline water and so on.
Our Anthracite filter media is made of Taixi anthracite by washing, chosen, smash, repeatedly screening and so on procedures. Anthracite has nice lustrousness, mechanical strength, resist compression, hard wearing and steady chemical activity. Also, Anthracite has some separate-absorb activity, which can absorb and disposal color, stink, flavor and minute organism in water, and applied to filter life water, industrial water as well as municipal sewage. Anthracite a nice material for environment protection.

What is limestone?

Limestone is greatly used in architecture as it is easily obtained, cut and carved. Limestone rocks contain flint, clay, sand and calcite in varying amounts. It is also preferred by most of the people in architecture and decoration, as it is long lasting and does well in every climatic condition. Calcareous sedimentary rocks are known as limestone and they are composed of the mineral calcite. When calcite’s calcination is done, it gives lime as a product. In nature, limestone is available in various purity levels, depending upon the other minerals present with it. For example, if some limestone is present with more than 10% of dolomite, it is called as dolomite limestone and same goes for magnesium limestone too.

When limestone is recrystallised and polished, it becomes a decorative and building stone called marble. Limestone has been given different names depending upon its texture, mode of occurrence and foraminifera remains, etc. Limestone is a soft and porous stone which is usually composed of tiny fossils and bits of shells, which are easily visible. It is an oft-mined rock, commonly used in a number of applications. As such, much against the popular belief, the use of limestone is not restricted to only architecture. Find out various uses of limestone in the lines below.


What is color of limestone?

Limestone always white color


Quick Details

Place of Origin: Egypt
Brand Name: CairoMinerals
Model Number: Limestone-2016
Available sizes:
Limestone 1 mm - 3 mm
Limestone 2 mm - 3 mm
Limestone 1.50 mm - 3 mm
Limestone 0.075 mm -2 mm

A golf course sand consists of a series of holes, each consisting of a teeing ground, fairway, rough and other hazards, and a green with a flagstick (pin) and cup, all designed for the game of golf. A standard round of golf consists of playing 18 holes, thus most golf courses have this number of holes.] Some, however, only have nine holes, and the course is played twice per round (2×9=18), while others have 27 or 36 holes and choose two groups, of nine holes at a time, for novelty and maintenance reasons. Additionally, par-3 courses also exist, consisting of nine or 18 holes, all of which are a par 3 (strokes for a scratch golfer). Many older golf courses, often coastal, are golf links, of a different style to others. For non-municipal courses, there is usually a golf club based at each course, and may include a pro shop.


USGA Test Analysis

USGA Specification Of Silica Sand For The Use On Golf Green Construction

A. We produce and supply different colors of sand according to USGA
B. Our Golf Course Sand Has Two Different Varieties
C. White quartz silica sand with high purity more than 99.3%
D. Second variety with yellowish color with purity 96.7
E. Origin: EGYPT
F. Packing can be customized according to buyer request
G. Can be bulk by trucks, bulk be vessel, bags of 1500kg
H. Large quantities can be arranged
I. High daily productivity with our own screening plant
J. Quality control for each batch on our site lab by sieving test analysis

Cairo Minerals Offer the Silica sand with High Quality for horse racing track
* High purity 96.7-99%
* Natural sand100%
* Dry sand no wet
* High practical size Distribution
* Rounded sand
* Free of organic and impurities materials
* Free of radiation
* Free of toxic
* Turbidity less than100
* No Dust
* No heavy metals

Available sizes:
* 0.1mm-0.7mm
* 0.0mm-0.8mm
* 0.0 mm-1mm
* 0.0 mm-2mm
* 2mm-4mm
* 3mm-6mm
* 5mm-10mm

Packing:
* bag of 25kg
* bag of 1500kg
* can be in pallets or loose in pallets

Egypt is one of the best places which you can find the Highest and purist Quality Silica-sand, CairoMinerals offer Quality Products with Competitive Prices since 2004 but we are not only in the market, you can find many companies in Egypt as well deal with white silica-sand

What is silica sand ?
Silica (SiO2) sand is generally the sand which you can get all over a beach and it also happens to be the most commonly used sand. It is most commonly composed by either crushing sandstone or else it is most commonly taken from natural occurring points or locations, such as beaches and river beds. The fusion point of purest form of silica is 1,760 �°C (3,200 �°F), however the sands which is used for extraction of silica exhibits a lower melting point due to impurities. For casting which requires high melting point, such as steels, at least 98% pure should be used; however for metals having lower melting points, like cast iron and non-ferrous metals, the sand have low purity can be used (between 94 and 98% pure).

Silica-sand happens to be the most commonly used sand because it is found in abundance, and thus it costs low (therein being its greatest advantage). However there are some disadvantages of sand as well. The disadvantages of silica are high thermal expansion, which can result in casting defects in metals having high melting point, and low thermal conductivity, which can very easily result in defective casting. Apart from there that, there comes some more barriers with it. It also cannot be used in sync with some of the basic metals because it will chemically react with the metal, resulting in surface defects. Finally, it releases silica particles during the pour, risking silicosis in foundry workers.

Silica Sand for Sale
Commercial Silica-Sand is most commonly used as a means of proppant by companies which deals in oil and natural gas recovery in conventional and unconventional resource plays. The resource is also utilized in industrial processing to manufacture regular use items such as glass, construction materials, personal care materials, electronics, and even renewable materials.

Industrial sand happens to be a word which normally refers to silica-sand-products having extremely high purity with closely controlled sizing. It generally happens to be a clearer product than common concrete and asphalt gravels.

The name Silica (SiO2) is provided to a handful of minerals solely made up of silicon and oxygen. Mostly it is found in the crystalline state. It is also found in an amorphous form which comes as a result of weathering or plankton fossilization

Silica-sand deposits are generally mined and dig out in open pit processes. Extracted ore is subjected a lot of processing to enhance the silica content by reducing impurities. After that it is dried and sized to manufacture the best sized particle size distribution for the intended application.

Silica Flour

Silica Sand For Golf Course

Red Iron Oxide

Origin: Egypt

Size Of lumps: 0-10 CM

Can supply more than 5000 tons per month

-Shipping all over the world

Packing: bulk-loose in vessel or in 0 feet container

Place of Origin : Egypt
Brand Name: Cairo minerals
Model Number: Quartz Lumps 30181
Type: Silica Quartz
Application: Glass,silicon metal
Grade: SiO2 Content (%): 99.80%
Fe2O3 Content (%): 0.015%
Al2O3 Content (%): <0.01%
MgO Content (%): <0.01%
CaO Content (%):<0.01%
P2O5 Content (%): -White Pure White
Size: Lumps can be customized according to customer request
Packing: Bulk loose in vessel or bulk loose in 20 feet container

Silica Sand for Water Filtration

Swimming pool filter sand our product of filter sand and Filter Gravel Exported to more than 17 countries in all over the World. We Are Extracting from High Quality Quarries with SIO2 more than 96.7% which was river sand since thousands of years. The raw materials is generally Extracted from East Egypt, wady al Natron, Sadat City, Giza.
Silica sand for water filtration.

We produce and process our products in our own screening plant which biggest in Egypt, that is why we confirm stability of quality in long term supplying with Worldwide companies in field of water filtration and Water Treatment, we are Exporting to many countries,Japan,Philippines,Greece,spain,Georgia,Senigal,Syria,Iraq,Georgia,coroatia,Kuwait,UAE, Egypt, Algeria, Qatar, Kuwait, Sultanate Oman, Cyprus, Turkey, Malta, Libya, India, Iraq.

Cairo Filter Sand is used to filter and clean Portable water filters and pool filter and sewage treatment plant Purity MORE Than 96%, Free of any organic materials, no clay, no Radiation, no toxic materials.
Cairo Filter Sand Meets EN12904 and AWWA B100-96 and BS:910(1969)

Physical properties of silica sand and silica gravel
Appearance
The product is a grey/white, yellow or multicolored granular material.
The structure is crystalline, with a smooth to rough texture.
The particle shape is spherical or angular depending mainly on the origin and manufacturing procedure (quarrying or dredging, or crushing). The shape influences filtration performance, see A.3.
The product shall be generally homogeneous and shall be visibly free of extraneous matter.

Obtain High Grade Silica Sand from Distinguished Sources

Planet Earth is a storehouse of valuable minerals and elements. Some are readily available on the surface of earth whereas rest is extracted from the womb of earth.

Some special elements are found in selected parts of the earth. High quality Silica sand is very useful element that is imported by various nations. Silica sand is used in construction material but is also used in water filtration. Though silica sand is accessible in various part of world but issue of quality and impurity is also attached with them, so you must choose your silica sand suppliers carefully.

The aspect of physical characteristics and purity should be never neglected while procuring silica sand.

Pool Filter Sand
The size of grain, presence of impurity, strength and refractoriness are the aspects which should be examined thoroughly prior placing any order. Silica sand is a valuable gift of nature.

Reputed registered companies take appropriate permission from government to export this valuable mineral. There is an immense demand of silica sand used in pools filter.

High grade Silica sand is exported in huge quantity to various countries like India, Spain, Greece, Cyprus, United Arab Emirates, Malta, Kuwait, Turkey, Qatar, Japan, Syria, Georgia, Croatia, Philippines, Iraq, Algeria and Sultanate of Oman.

Silica Sand suppliers

Cairominerals is silica sand Supplier since 2004 ,CairoMinerals can offer High Quality silica sand with Competitive Price .we are not only in the market ,but we work hard and honesty to be trustworthy of our customers.

Where to buy Silica Sand?

on the North side of Suez Gulf in ABOU ZNIEMA or in Southern side of Suez Gulf in AL ZAFARANA Along Red sea cost as well in north Sinai in AL AREASH AREA.

Looking to buy Silica Sand For Glass Making ?

Looking for quality and Reliable Silica Sand suppliers !! Let Cairo Minerals find the perfect solution!.

The Purity of that White Silica sand Sand Exceeds 99.3%.white Silica sand can be used for Manufacturing in different types of Glass, Float glass ,Glass Sheets, Glassware, tableware, Crystal ,Bottles and Container Glass.
what is main Elements of White Silica Sand which can cause in glass making?.

The Highest Content of SIO2(Silicon Dioxide) and Lowest Iron Content is the main Element in Focusing and Comparison in Silica sand, as well Al2o3


Below Is Different Grades of White Silica Sand For Glass Manufacturing:
Applications Glassware & Crystal
1-prcocessed from Abou zniema quarries or Zafarna Quarries
2-stored and exported in Bulk shipment from port ABOU ZNIEMA PORT (red sea port)
3-vessel of 5000-25000 M tons Max can enter the port draft
4-for orders of 1000 tons or less can be packed in big bags
5-containers of 20 feet can be stuffed with 25-27 tons
6-what does it mean 250MUL
-Answer: it mean 0.025% Iron Content and sometimes called 250ppm
7-how much percentage of iron content of silica sand can be used in Float Glass Making?
-Answer: in fact silica sand with 0.025-0.030 Matches that type of Glass
8-from which sea port in Egypt we can ship bulk silica sand for Glass?
-Answer:Abou zenima sea port , Adabeya sea Port,Damietta sea port(Mediterranean sea)
9-How far white silica sand quarries from Cairo?
Answer:distance from Cairo to silica sand quarries in Abou zenima about292Km(4 h 10 min)
to be honest ,the quarries there mostly far away from city about 30km-50km

Foundry Sand -Silica Sand For Foundries

High Quality and high deposit foundry sand since thousands of years with Huge Reserve in Egypt which available in ZAFARAN AND ABOU ZNIEMA and yellow silica sand with quality greater than 98$while the WITH Quality of 99.10% Sio2 with and Iron content average from 0.018% -0.0.35% with practical size Distribution from 0.075 mm – 0.85 mm,its High Quality with high whiteness and Low Al 2o3 support high casting products which used by Best Car factories. High Frequency Vibrating Screen supports us to produce different fines which meet multi casting uses. Because we are in Egypt land of a large various of minerals, in al sharqeya, we have Brown Silica sand with Purity of 96.5%-97% SIO 2.

where to find white silica sand?
-White silica sand can be found in tow main places in Egypt
-South Sinai where Abou zenima port main port which most Exported silica sand to India, UAE ,Turkey
Zafrana quarries which far away from Cairo about 350 km
What is purity of white silica sand?
Sio 2 minimum 99%
Which AFS grades can graded from white silica sand?
In fact , White silica sand mostly AFS from AFS 45 – AFS 55 as its grain size mostly from 0.075 mm – 0.850 mm
Properties
• High Strength and High RESISTANCE meets ASTM
Advantages
• ISO 9001 Certified
• High strength, superior casting finishes in all binder systems and metals
Foundry Sand Specifications
We can meet different AFS grades
1- processed from Abou zniema quarries and Sharqeya quarries
2- stored and Exported in Bulk shipment For Large Quantity from port ABOU ZNIEMA PORT (red sea port)
3- vessel of 5000-25000 M tons Max can be loaded the port of Abou zenima As Draft of the port 9.50 Meter
4- for orders of 1000 tons or less can be packed in big bags of 1250kg-1500kg
5- containers of 20 feet can be stuffed with 25-27 tons
6- Each container load about 20 big bags
7-big bags can be used in good condition or new upon customer Request
What is main Requirements of silica sand used in foundry?
Here Is What You Should Do For Your FOUNDRY Silica sand
1-Rounded silica sand
2-Sand Size Distribution
3-Chemical and Thermo – Physical Properties
4-The Acid Demand Value test
5-Fines and Clay

golf course sand
A golf course sand consists of a series of holes, each consisting of a teeing ground, fairway, rough and other hazards, and a green with a flagstick (pin) and cup, all designed for the game of golf. A standard round of golf consists of playing 18 holes, thus most golf courses have this number of holes.] Some, however, only have nine holes, and the course is played twice per round (2Ã??9=18), while others have 27 or 36 holes and choose two groups, of nine holes at a time, for novelty and maintenance reasons. Additionally, par-3 courses also exist, consisting of nine or 18 holes, all of which are a par 3 (strokes for a scratch golfer). Many older golf courses, often coastal, are golf links, of a different style to others. For non-municipal courses, there is usually a golf club based at each course, and may include a pro shop.



USGA TEST ANALYSIS


USGA SPECIFICATION OF SILICA SAND FOR THE USE ON GOLF GREEN CONSTRUCTION


We produce and supply different colors of sand according to USGA
OUR GOLF COURSE SAND HAS TWO DIFFERENT VARIETIES
White quartz silica sand with high purity more than 99.3%
Second variety with yellowish color with purity 96.7
Origin: EGYPT
Packing can be customized according to buyer request
Can be bulk by trucks, bulk be vessel, bags of 1500kg
Large quantities can be arranged
High daily productivity with our own screening plant
Quality control for each batch on our site lab by sieving test analysis

Test Certificate

Physical properties
High Plastic Ball Clay Malaysia Origin Description
1.4 Residue % (240#)
0.85 Residue % (150 #)
61 TDSppm (25% aquous sol)
1.7 Density (gm/cc)
No Flow Viscosity(sec )
0.35 STPP Demand %
46 Water of Plasticity%
25.7 Dry MOR(Kg/cm2)
9.78 Shrinkage%
7.92 Loss on ignition%
455.8 Fired MOR(KgIcm2)
300 Forming Pressure(KgIcm2)
2.23 Water Absorption%
Color Spectrometry ( L a b)
73.32 L*
2.88 A*
20.58 B*
45.55 Whiteness
1212/1217 Temperature C
48 Cycle mm.
Chemical Analysis
57.9 SiO2%
28.5 Al2O3%
0.65 Fe2O3%
0.35 CaO%
0.14 MgO%
1.44 K2O%
0.06 Na2O%
10.45 Loss On Ignition%

Turkey Feldspar


Physical properties
Turkey Feldspar Description
10.56 Shrinkage%
2.81 Loss on ignition%
300 Forming Pressure(KgIcm2)
0.37 Water Absorption%
Color Spectrometry ( L a b)
80.92 L*
-0.21 A*
7.85 B*
56.85 Whiteness
1214-1229 Temperature C
52 Cycle mm.
Chemical Analysis
70.46 SiO2%
15.04 Al2O3%
0.16 Fe2O3%
0.97 CaO%
0.45 MgO%
2.91 K2O%
6.46 Na2O%
2.86 Loss On Ignition%

Cairo Minerals Offer the Silica sand with High Quality for horse racing track
High purity 96.7-99%
Natural sand100%
Dry sand no wet
High practical size Distribution
Rounded sand
Free of organic and impurities materials
Free of radiation
Free of toxic
Turbidity less than 100
No Dust
No heavy metals


Available sizes:

0.1mm-0.7mm
0.0mm-0.8mm
0.0 mm-1mm
0.0 mm-2mm
2mm-4mm
3mm-6mm
5mm-10mm

Packing:

bag of 25kg
bag of 1500kg
can be in pallets or loose in pallets