pellet machine, with the advantages of low noise, easy and stable operation,
high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing.
Features :
1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily.
2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding.
3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain.
4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines.
5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Full substance, unsplitted
100% machine flayed
No ticks, no scratches, no humps
Size: 38 sqft. - 46 sqft. avg. size 42 sqft. machine flayed
Average size: size 42 sqft
Thickness: 3 to 4 mm
Weight: 22kgs ,26 ,28 to 32kg
Average weight: 27 to 30kg. per Hide
Selection: 80% A/B, 20% C/D
Male 75% / Female 25%
1. No jam in photocopy machine
2. No double feed
3. Stay flat after copying
4. Leave no dust in the copy-machine
5. Nice appearance-white and clean
6. Nice touch-smooth and bulky
7. No see through-print both sides
8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines
Gramage: 80gsm, 75gsm, 70gsm
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper
1. No jam in photocopy machine
2. No double feed
3. Stay flat after copying
4. Leave no dust in the copy-machine
5. Nice appearance-white and clean
6. Nice touch-smooth and bulky
7. No see through-print both sides
8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines
Gramage: 80gsm, 75gsm, 70gsm
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper
Full substance, unsplitted
100% machine flayed
No ticks, no scratches, no humps
Size: 22 to 34 sq.ft.
Average size: 28 sq.ft..
Thickness: 2 to 4 mm
Weight: 22kgs to 32kg
Average weight: 25kgs
Selection: 80% A/B, 20% C/D
Male 75% / Female 25%
Gramage: 80gsm, 75gsm, 70gsm
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper
Size:
International standard
A4: 210 x 297mm
A3: 420x 297mm
8.5 x 11-inch (216 x 279mm)
8.5 x 14-inch (216 x 330mm)
Key Performance:
No jam in photocopy machine
No double feed
Stay flat after copying
Leave no dust in the copy-machine
Nice appearance-white and clean
Nice touch-smooth and bulky
No see through-print both sides
Been developed for : Photocopy Macchines, Laser Printers, Ink-jet Printers, Fax Machines
1. It is mainly used as raw material for preparing lithium compounds. It can also be used in metallurgy, petroleum, glass, ceramics and other industries.
2. It is used to make lithium salt and lithium grease, electrolyte of alkaline battery, absorption liquid of lithium bromide refrigerator, etc
Full Facepiece Respirator
Large lens for wide field of view
Lightweight, balanced design
Silicone face seal for greater comfort and durability
Characteristics
Double exhalation valve;
Low respiratory resistance;
The transmission device design make the information transfer more clear
Used
Oil, Machine maintenance, Construction, Gas ,Electric power, Shipbuilding, Transport, Mine, Chemical plant, but not for radioactive high toxic particulate matter.
1) All the live materials are arranged to factory
2) Wash by purified sea water,remove the admixtures
3) Collect the grades,wash by purified sea water
4) Products disinfected,washed by fresh water in 30 seconds,with
water lost in 1 minute,and quickly frozen by the IQF machine
5) weight measurement
6) ice glazing by fresh water packing
Foreign Matter: 1%
Green (Cotyledon color), Immature, shrunken, shriveled seeds: 3%
Broken and Splits: 2%
Damaged and Weeviled: 3% (Weeviled 2% max.)
Moisture: 10%
Varietals Admixture: 3% (max.)
Processing: The grades are Machine Cleaned, HPS (hand-picked and selected) Sortexed
Storage: Chick peas can be stored for 6-12 months, without exposure to heat, light and moisture.
Full substance, unsplitted
100% machine flayed
No ticks, no scratches, no humps
Size: 28 sq.ft. and Up, Avg 35/37 sq.ft. per hide
Average size: size 37 sqft
Thickness: 2 to 3 mm
Weight: 15 to 25kg
Average weight: 17to 23 per Hide
Selection: 80% A/B, 20% C/D
Male 75% / Female 25%
1). Size: 25mm*25mm-250mm-250mm
2). Wall thickness: 1.5mm-25mm
3). Length: 1m-12m
4). Grade: Q195, Q235, Q345,SS400,SS540, S235JR, A36 etc
4). Certificate: ISO 9001-2008
5). Packing: Standard exporting package.
6). Delivery: Within 20 days after receiving the deposit.
7). Application: Framework of all kinds of construction and engineering; Construction joint ;Iron tower; Derrick frame ; Building structures, such as beams, bridges, transmission towers, lifting or transporting machines, shipping, industrial boilers ,product according to your needs.
134 Ceramic Machine Suppliers
Short on time? Let Ceramic Machine sellers contact you.
