Akfix HM 788 is a synthetic resin and EVA based hot melt adhesive of thermoplastic characteristic that gives perfect results with straight edge banding works where lower softening point and fast bonding is needed.
Rhino Tech
A two part screen adhesive for synthetic mesh to wood or metal frames
Application : Suitable for Wood,Metal, Alluminium Frames
Packing : 900gms
Std Packing : 9/18 units (for 900gms)
Shebro - India
Pure Photopolymer Emulsion
Description : Very high viscosity of about 10,000 cps allows wating thickness of 100-150 microns with just 3-4 coats on the screen. Usable for both, high density textile and UV printing.
Pre-Sensitized Shelf Life : 1 Year
Colour : Red
Packing : 900gms/3.6kgs
Solid Content : 41%
Std Packing : 9 units (for 900gms)
Std Packing : 4 units (for 3.6kgs)
Chromaline - U.S.A
For Plastisol inks
Discription : Photoemulsion intended for use with plastisol inks only. This high-quality, yet economical emulsion reaches exposure speeds of many dual cure systems. Its high viscosity won't sag in low mesh counts yet Its rheology behavior Allows high stencil Buildup with minimal coatings.
Shebro - India
A biodegradable and non-abrasive emulsion
Discription : A biodegradable and non-abrasive emulsion treatement that creates a permanent stencil. improves stencil durability. Suitable for nylon/polyester/steel mesh.
Colour : Clear
Packing : Set of 1800gms
Std Packing : 12 set (for 1800gms)
900 Adhesive Sealants Lubricants Suppliers
Short on time? Let Adhesive Sealants Lubricants sellers contact you.
Water proffing for protect Starch Bonding.
Packex CR-20 is a thermosetting ketone aldehyde starch based corrugating adhensive. It features a specific blend of proprietary corrugator performance enhancing ingredients
* substitute of 'LOCTITE 401'
* EU RoHS compliant product
* Non-solvent : Does not contain organic solvents and does not cause hallucinatory effects. Suitable for use in various work environments.
* Cures at room temperature (20C to 30C) and does not require special curing equipment.
* Fast curing that bonds in seconds. Reduces job completion time and facilitates automatic production lines.
* Transparent and low odor. Works well with any use and material to give a clean finish.
* Viscosity (cps) : 90~110 / Tensil-Shear Strength : Above 180 / Initial Cure Speed : 3~5 / Working Temperature : -54~82C
The heating apply one-part adhesive and sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings and various appliances.
one-part sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings, color steel plate, roof sealing and various appliances.
Hot melt glue for book binding
Paper weight:
60-120gram HM8030
120-157gram HM8030W
ï¼?157 gram HM 8216
It's designed for use in bookbinding side gluing for meidum to high speed perfect binding line or standalone rotary binder, it is formulated with good adhesion and thermal stability, long open time and good flow property, light clear yellowish abd is suitable for bonding printed, varnished or BOPP laminated paper.
RAPPORT RP-6210 Hybrid Sealant is based on the hybrid silicone polymer one-component adhesive. It react with moisture in the air, and gradually formed a kind of high strength of the elastomer.
RAPPORT RP-6210 Hybrid Sealant is a universal sealant, with higher adhesion property and better elastic recovery rate. It is suitable for all kinds of porosity and porous material.
RAPPORT RP-6210 Hybrid Sealant Sealant has good adhesion, and has significant characteristics in coating the paint.
Features:
One component, easy to use
Excellent adhesive performance
Odorless, non-corrosive
Excelent flexible
Water resistant
Widely use
Paintable
Technical Data:
As Supplied tested at 23�2, RH50%�5%:
Aspect:Thixotropic Paste
Odor:Low odor
Specific Gravity:1.5
Skinning Time, min:20
105 heat loss%:1.7
Application Temperature, :+5 to +45
Service Temperature-40 to +80 As Cured tested at 232, RH50%5% :
Movement Capability Level, %20 Hardness Shore A.7d:55
Adhesion Propertiesnon-destruction Tensile modulus(MAX), MPa1.5
Elongation at break, %350
Typical Application:
Suitable for various substrate seam sealing, including stainless steel, sheet, copper, wood, coating, etc, with the function of waterproof anti-corrosion sealing seal inside and outside.
Suitable for is suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound dampening measures in collision repair and vehicle body construction.
Suitable for the interface of anticorrosion seal in areas of rivet, bolt, hinge, weld. Suitable for all kinds of anti-water sealing of the gaps of metal structure, fume hood, houses built.
Instructions for Use:
APPLICATION TEMPERATURE: +5 to +45
1. Cleanse with a cleaning agent, to keep the substrate surfaces completely cleanJOIN LEADER also provide the cleaning agent for your convenience
2. Use the sealant after cleaning agent dries, around 1~2mins later. You can use two different cloth, one for cleaning agent, and the other for sealant. Notice that the two cant be mixed use together, and the second cloth will be better purified cotton and no picking.
3. For better appearance, cover outside of joint areas with masking taps before application.
4. Cut nozzle to desired size and extrude sealant to joint areas. Tool immediately after sealant application, make it smooth and remove masking tape before sealant skins.
Color:
White, Grey, etc. Other Color Available
Package:
Cartridges: 250mL, 300mL,
Sausage: 300mL, 600mL
Different Packing Available
RP-1501 Neutral Transparent Silicone Sealant is based on the hybrid silicone polymer one-component adhesive. It react with moisture in the air, and gradually formed a kind of high strength of the elastomer.
Features:
Easy to use,
fast drying, no drooping,
good transparency;
good elasticity and bonding properties,
used in a wide range of climatic conditions, excellent weather resistance;
Medium modulus, high elongation, high elasticity, can be used for general bonding and sealing.
Technical Data:
Tested at 23±2, RH50%±5%:
Specific Gravity: 0.9~0.95
Skinning Time: 20m
Operating Temperature: +5 to +45
Tolerance Temperature: ï¼? -40 to +100
Hardness( Shore A): â?§18
Tensile Strength: â?§0.6 MPa
Elongation at break: â?§300 %
Glass bond damage area: â?¦25%
volatile component: â?¦35%
Typical Application:
Wide range of bonding, excellent adhesion to most building materials such as glass, aluminum, oil-free wood.
The back of the wooden line, the gap between the sanitary ware, the toilet, the sink and the walls, etc.;
Automotive and machinery industries, providing instant formed leak-proof pads for gearboxes, compressors, and pumps.
Instructions for Use:
Please follow the steps below to apply the sealant.
Cleaning and drying of the coating base
Laying support and anti-adhesive materials
Sticking textured paper
Injecting sealant
Using a scraper to scrape off excess glue
Removing the texture paper and cleaning the seams around
Checking and confirming
Color:
Transparent (other colors adjustable, such as white, gray, black)
Package:
Cartridges: 300mL,
Sausage: 300mL, 600mL
Safe Notes:
The product will release small molecules during the solidifying process and the workplace should be well ventilated.
Avoid direct contact with the skin and eyes; once touched to the skin, dry it with a dry cloth and rinse it with water;when reaches eyes, rinse with plenty of water for more than 15 minutes. If the symptoms cannot be relieved, seek medical attention.
The product is completely safe without any toxic or accessory properties when totally solidified..
Keep out of reach of children.
do not swallow.
We mainly serve power plants, hydroelectric power stations, metal mines, coal mines, steel mills, cement plants, petroleum, chemical, natural gas industries. All along, we have provided products and service for many big domestic projects with first-class quality, competitive price and good service, received good reputation among customers.
Sealant DE82-2
PET sleeve fiberglass stripÏ?16
Dacron glass fiber stripÏ?4
F-grade insulating glass fiber plate1Q4377-6 7*39.4*671
glass fiber pipeÏ?17/Ï?21*15 glass cloth tube 3640
generator slot SealantT25-75
steam turbine generator SealantT2575
Generator exclusive sealantT20-66 453g
grease gun5D463.338 T15
insulating air-dry red insulating varnish9130
straight insulating boxF30001/1-6
Thermal power filling adhesiveHDJ-14
RTV adhesiveY841 AB
generator end cap sealing greaseT25-75
head insulatingF28602/2-4-11
steam turbine generator sealing greaseT2075
clear insulating varnishY31-3
COPALTITE Sealant Cement/Liquid1 qt
LR anti-corona varnish1243 F-class
red Steel paper gaslet17.5*6.5*3
Sealant DE82-2
RTV epoxy adhesiveDECJ0793
F-class Modified epoxy dipping adhesiveFJ1840
F-class Solvent-free fast-dry insulating varnish11412
generator Steam/Exciter end cap sealing gasket
silicon rubber surface SealantLoctite 587
insulating box filling adhesiveJ0978 AB
Dacron glass fiber stripÏ?5
vulcanized fiber paper1.5*900*1200
Sealant DE82-2
2019-11-25-DFJerry
Exsan Long Life Tire Puncture Sealant - Available in all types of Plastic and Metal packaging with desired shape, size, material weight, design and brand name as per consignee's desire.
900 Adhesive Sealants Lubricants Suppliers
Short on time? Let Adhesive Sealants Lubricants sellers contact you.
