Find Verified Extrusion Machines Suppliers, Manufacturers and Wholesalers

The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.

The features of this technology:
1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar;
2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding;
3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;
YJ650 stamping equipment
4.No flammable gases, not affected by rainy or cold weather;
5.Relieve congestion of the connecting point, facilitated concrete pouring;
6.No professional and experienced worker needed, able to connect changed steel bar of different diameters;
7.Save 80% of connector steel consumption.
The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."

The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.
The features of this technology:
1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar;
2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding;
3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;
YJ650 stamping equipment
4.No flammable gases, not affected by rainy or cold weather;
5.Relieve congestion of the connecting point, facilitated concrete pouring;
6.No professional and experienced worker needed, able to connect changed steel bar of different diameters;
7.Save 80% of connector steel consumption.
The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."

Cold Extrusion Application Principle:
1.Place it well at the working point.
2.Directly use it to press connection point with screwless couplers to link the two rebar.

The features of this technology:
1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar;
2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding;
3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;
YJ650 stamping equipment
4.No flammable gases, not affected by rainy or cold weather;
5.Relieve congestion of the connecting point, facilitated concrete pouring;
6.No professional and experienced worker needed, able to connect changed steel bar of different diameters;
7.Save 80% of connector steel consumption.
The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."

Single screw kneader sheet extrusion
Model no: m55l/jdl100
Single screw l/d ratio: 25-36
Screw speed: 20-120r/min
Screw capacity: 250-350kg/h
Mixer motor power: 75kw
Material direction: back
Weight: 8500kg
Price: 75000 usd/set
Mixer capacity: 45-75kg/unit
Number of timers(mixer): 0.6-0.8unit/h
Mixer speed(before/after): 39/30rpm
Mixer size h*w*l: 3250*2300*3350mm

Features:
1.The characteristics of the machine is advanced design, high quality, good plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long life.
3.The technology can be adjusted according to customer’s raw material.

Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single screw—molding—three-roll calender—tractor—plate corona treatment—cutting machine—piled up

Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet, insulation sheet for vehicle, interior sound insulation pad, car carpet, front enclosed sheet and the side enclosed sheet;etc.

Single screw kneader sheet extruder (m75l)
Model no: m75l/jdl150
Feeder: 11kw conical feeder
Cutting mode: air cooling die-face hot cutting
Price: 100000 usd/set
Main motor power(single screw): 110kw
Single screw l/d ratio: 22:1
Screw speede: 20-96r/min
Screw capacity: 350-400kg/h
Motor power (mixer): 110kw
Material direction: back
Weight (mixer): 105000kg

Features:
1.The characteristics of the machine is advanced design, high quality, good

Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long

Life.
3.The technology can be adjusted according to customer’s raw material.

Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single

Screw—molding—three-roll calender—tractor—plate corona treatment—cutting

Machine—piled up

Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,

Insulation sheet for vehicle, interior sound insulation pad, car carpet, front

Enclosed sheet and the side enclosed sheet;etc.

Single Screw Kneader Sheet Extrusion
model no: M55L/JDL100
single screw L/D ratio: 25-36
screw speed: 20-120r/min
screw capacity: 250-350kg/h
mixer motor power: 75kw
material direction: back
weight: 8500kg
price: 75000 USD/SET
mixer capacity: 45-75kg/unit
number of timers(mixer): 0.6-0.8unit/h
mixer speed(before/after): 39/30rpm
mixer size H*W*L: 3250*2300*

Features:
1.The characteristics of the machine is advanced design, high quality, good

plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long

life.
3.The technology can be adjusted according to customer’s raw material.

Production process:
M mixer to ZDL automatic winder,ZDL forced feeding machine--the ZDL single

screw—molding—three-roll calender—tractor—plate corona treatment—cutting

machine—piled up

Applicable materials:EPDM,PE,POE,EVA,PVC,materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors ,EVA sheet,

insulation sheet for vehicle, interior sound insulation pad, car carpet, front

enclosed sheet and the side enclosed sheet;etc.

1. Parallel twin-screw extrusion machine
2. Kneader-single screw extrusion machine
3. Two-stage extrusion machine
4. 3D printing filament extrusion machine
5. Plastic &rubber shredder
6. Plastic washing recycling production line
7. Rubber extrusion machine




wood case, film and nuded