Xm65/25 plastic extruder 1. The application of the equipment: For the production of plastic extrusion. : the material of pvc, ldpe, xlpe, lshf, tpu ext. 2. Technical parameters 1) production scope: the diameter of the conductor: 1-10mm Finished diameter size: 2.5-13mm 2) extrusion capacity: max 80kg/hr 3) motor power: 15kw(frequency conversion) 4) heating power: 16kw(three section heating with air cooler) 5) center height of the machine: 1000 mm 6) pay-off spool specification: diameter 630mm(pn 400-630mm) 7) take-up spool specification: diameter 630mm(double spool) 3. Composition of the equipment 1) 630mm no-spool pay-off 2) elevating tension straightening machine 3) sj65 extruder with auto feeding. 4) water cooling sink 5) dry-printing device 6) diameter measure device 7) 600 mm/ 350mm wheel traction machine 8) 630mm double spool take-up machine 9) control box Standard package.
(1) engineering service to help your design for better and efficiency manufacturability. (2) complex products and innovative designs can be created with much geometry. (3) highly automated and incorporate secondary operation. (4) low cycle time enables cost-effective production for large quantities of complex products (5) precision stampings in all shapes, sizes, and materials. Please visit our web site at www (dot) pyramids (dot) com (dot) tw for more information. ---custom-made order acceptable. Please send us drawings for quotation.
On the basis of absorbing foreigh advanced technology.Plastic extruding flat film stretching line is used by micro-processor control frequency conversion and silicone controlled dc etc.The main parts use foreign quality products.The line on large l/d ratio and mixing smelt section on the extruder screw for which is specially parts using quality steel, for the filter changing system we apply advanced foreign automatic filter changing structure.The heating board is changed into advanced stretching hot air oven and principal technical index of the line reach international advanced level.The line has the performance of high speed.Top yield, low energy consumption., good forming quality of the fiber dru.The structure of the line is compact with a pleasing appearance smooth running, flexible and reliable control sophisticated Diameter of screw¡¨ºo65mm
This machine uses the polypropylene(pp) or high density polyethylene(hdpe) material to produce tapes for ppwoven bags, weaving through production procedures of material heating & extruding, splitting the film into tapes.Stretching & forming tapes, and then winding on the bobbins by winding machine, finally put the bobbins with tapes on circular loom for weaving. The tape extruding & stretching machines are our, with the use of special and advanced technology, we have refored this series machine many times.Through iproving, the machine can be fit for all kinds of pp&pe material, such as 100% recycled material, powder or grain material, to produce tapes.The screw and barrel of extruder are ade of high quality 38croa1a alloy steel, the hardness is over hv950 after nitriding treatment.It has the performance of easy operation & Motor power of extruder is 18.5kw Heating power of extruder is 24kw Width of die-lip is 600mm Diameter of drum is 320mm Number of arch heating plate is 2pcs Heating power of the plate is 15kw Stretching ration is 4-7 Production capacity is 30-80kg/h Winding speed is 20-150m/min Number of winder is 100spindles System installed capacity is 98kw Normal operational capacity is 64kw Weight is 8000kg Overall dimension(j*w*h) is 23600*2500*1800mm
This machine is absorbed from international advanced technical and manufactures by ourself, which major in producing monofilament yarn by hdpe and pp material The monofilament yarn can be widely used for rope, fish-net, safe construction net, article hair, mosquito nets brushes as well as protectives nets for the cotton fields. The assembly is compacted in its structure.Ad motor is used for drawing thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters.The spinnerets produced by the most advance way so that the flatness and eveness of the filaments can be ensured.Stability in motion, sensitiveness in control, convenience operation, high safety and reliability. ¡êabrush monofilament ¡êaropes ¡êafishing line ¡êafishing nets ¡êavelcro monofilament ¡êamosquito nets ¡êazipper onofilament ¡êaconstruction safety nets Model is sj-ys-45 Diameter of screw¡ê¡§mm¡ê© is 45 Rotation of screw¡ê¡§r/min¡ê© is 10-50 Capacity¡ê¡§kg/h¡ê© is 20-45 Diameter of yarn¡ê¡§mm¡ê© is 0.1-0.35 Line speed¡ê¡§m/min¡ê© is 100-150 Number of spindlers is 100 Install power¡ê¡§kw¡ê© is 90 Overall dimensions¡ê¡§m¡ê© is 23*1.7*1.7
6¨¦it is high-efficient and energy economical.The highest rotation speed of the main motor can reach 180r/min and the power is 3kw.Which can save 10 thousand degree electricity compared with the traditional small-sized six shuttle circular loom whose power is 4kw. Main technical parameter Model¨ºos-yzj-850/4s Number of shuttle¨ºo4 Weaving folding width¨ºo350-850mm Max.Number of warp¨ºo768 Revolution of main motor¨ºo120-180r/min Production capacity¨ºo1.2-1.8m/min Power of main motor¨ºo2.2/3kw Total power¨ºo2.7/3.5kw Weight(about)¨ºo3000kg Overall dimension(l*w*h)¨ºo9100*2410*3100mm
Ign of composite diedead for large diameter winding pipe processing with poducessing with high production effeciency , high quality of winding pipe produced by adopting the unique winding process easy operation and high performance by adopting an andvanced plc 1.Resistance pressure, good impact.Inside of pipe u type steel belt can substantially improve the pipe ring stiffness. 2.Good nconomy .Light weight transport, installation easy , the price is cheaper. 3.Resistance ph, aging, not corrosion by sewage and chemistry, black pipe uv, extended uselife. 4.Drainage , sewage clear, inside of pipe small resistance, ablity to pass water strong, flow big. 5.Connection safe reliable, can use the electric hot-melt, shrinnk belt, inside and outside welding and so on combination, connect firm, the pipe no leakage. Packing film and wooden cases in standard container or according to customers' requirements
Specially-designed spiral moulds for pe pipes, with inside oil controlling temperature system. Beautiful and practical stainless steel body for the vacuum calibration and spray cooling system, unique multi-section vacuum system ensures the stable sizing and cooling for pipes; special spray cooling system improves the cooling efficiency; special water position, water temperature system make the machine more intelligent. Hauling-off unit adopts particular pedrail structure, which is easy and convenient for operation; pedrail clamping uses mechanical and pneumatic combining system, which is more reliable. Cutting system adopts saw blades and planetary cutting means; sumping uses hydraulic system, which ensures the smooth cross section; equipped with dust-collecting unit, which ensures the clean working environment. Main technical data: Model emsg-65/30 emsg-90/30 emsg-120/30 emsg-150/30 emsg-120/33 emsg-150/33 Pipe size/mm d16-63 d75-160 d160-315 d200-450 d315-630 d400-800 Screw diameter/mm 65 90 120 150 150 150 L/d 30: 1 30: 1 30: 1 33: 1 33: 1 Capacity/kg/h 80-160 180-220 250-400 500-600 700-900 800-1000 Hauling speed/m/min 0-16 0-10 0-6 0-3 0-2 0-1.5 Cutting means saw blade or non-scrap cutting planetary cutting planetary cutting planetary cutting planetary cutting. Wooden case or other moistureproof packages
Adopting extrusion technology by leader machinery, and the final products of this line, which can endure pressure 0.4-2.5mpa, are mainly used for the indoor water supply. Using heat-melting weld means for fittings, antisepsis and anticorrosive, so this kind of pipe is the new environment- protection water supplying products. Adopting extrusion technology by leader machinery, and the final products of this line, which can endure pressure 0.4-2.5mpa, are mainly used for the indoor water supply. Using heat-melting weld means for fittings, antisepsis and anticorrosive, so this kind of pipe is the new environment- protection water supplying products. Main technical data: Model lmsg-65 lmsg-90 Pipe size(mm) d16-63 d75-160 Screw diameter(mm) d65 d90 L/d 30: 1 30: 1 Screw rotation speed(rpm) 0-90 0-75 Capacity(kg/h) 120-160 180-220 Hauling speed(m/min) 0-13 0-10 Cutting means: saw blade or non-scrap cutting Pipe length control: electron counting or electrical switch control. Wooden case or other moistureproof packages
Model apet single layer apet/petg co-extrusion line Extruder sj120/33 sj120/33, sj65/33 Width of products 500-1500mm 500-1200mm Thickness of products 0.10-1.5mm 0.25-1.5mm Motor power 160kw 160kw/45kw The maximum output 450kg/h 550kg/h Extruding speed 25m/min 25m/min Model apet single layer apet/petg co-extrusion line Extruder sj120/33 sj120/33, sj65/33 Width of products 500-1500mm 500-1200mm Thickness of products 0.10-1.5mm 0.25-1.5mm Motor power 160kw 160kw/45kw The maximum output 450kg/h 550kg/h Extruding speed 25m/min 25m/min. Wooden case or other moistureproof packages
Model apet single layer apet/petg co-extrusion line Extruder sj120/33 sj120/33, sj65/33 Width of products 500-1500mm 500-1200mm Thickness of products 0.10-1.5mm 0.25-1.5mm Motor power 160kw 160kw/45kw The maximum output 450kg/h 550kg/h Extruding speed 25m/min 25m/min Model apet single layer apet/petg co-extrusion line Extruder sj120/33 sj120/33, sj65/33 Width of products 500-1500mm 500-1200mm Thickness of products 0.10-1.5mm 0.25-1.5mm Motor power 160kw 160kw/45kw The maximum output 450kg/h 550kg/h Extruding speed 25m/min 25m/min. Wooden cases
Raw material+ carbon - mixing-- vacuum feeding -- material dryness -- single screw extruder -- steel wire unlocking -- extrusion mould-- spiral calibrator -- spray vacuum tank -- belt haul-off -- manual cut -- winder -- finished product inspecting & packing Model: lspe-75 lspe-90 Screw diameter: 75mm 90mm L/d: 30: 1 30: 1 Pipe range: 50-150 75-200 Capacity: 80-110 150-250 Main motor power: 55 90 Total power: 70 130 Line length: 15 18. Wooden cases or wood pallets
This PVC free foaming board, skinning foaming board extrusion line are composed of special twin-screw extruder, die and downstream equipment, our company can provide the formula and all the processing techniques. This machine has the features of high output, stable extrusion, high foaming, smooth and wearable surface. By equipping with the printing machine, laminating machine or hot stamping machine, this machine can produce different kinds of artificial wood products, so that this machine has a very wide application range. Application: Used for cupboard, furniture board, construction decoration material, advertisement board, upholstery for train, car and ship. Wooden box.
Feature : This line of machine has widely apply in many field, such as Car decoration, package industry, stationery, Building decoration and food packing field. Because it's light and the foaming pore is very even, bright, texture clear and low costs. 1.Special Extrusion Screw design: To ensure excellent mixing and dispersion performance. Effectively improve spot and color difference problems. 2.Vacuum Dry System: Provide both efficient removal of moisture,gas wasted and stable material output. 3.PID Temperature Control System: Combined with the forced cooling system to provide maximum stability and accuracy of temperature control. 4.DC Device: Provides stable driving performance,low noise,low power consumption and maximum power output. This machine can also be a multifunctional, producing common Sheet: AB C, ABA, AB and single, Cost-effective, Advanced machine design, Configuration optimization and reasonable, High automation. Item Description Materials PP Capacity 100-250 kg/h Screw Diameter (mm) |Õ90/|Õ55; |Õ120/|Õ65; |Õ150/|Õ85 Ratio of Screw (L/D) 1:30 Output product width 800-1600mm Output product thickness 0.6-5.0mm Leading speed 1-25m/min Main motor power (KW) 45/7.5; 110/45; 160/45 Co- motor Power (KW) 10-15 Heating Power (KW) 100-200. Wooden case line with bubble bag or as your required.
Feature: This line produces PET sheet for formed packaging of a huge range of items such as toys, stationery, paneling, logo plates, arts and crafts, etc.. Special screw structure design to ensure plasticizing efficiency without any spots; No special dry require, can do 100% recycle material Compatible with PET, APET, PETG, CPET mixing; Quantative bar to ensure continued and stable output Filter changing without shut down On line silicon oil and destatic device available Super color touching screen, friendly user interface and easy to operate; Adopt BECKHOFF Industry computer bus system and windows XP2 system with excellent alert system. Specifications: Item Description Materials PET, APET, PETG, CPET Main Motor power 132kw ,185kw Output product width 500-1200mm; 800-2200mm Output product thickness 0.15-2mm Line speed 5-25m/min; 5-18m/min Capacity 450kg/h; 650kg/h. Wooden case linked with bubble bag or as your requested.