Winstrip KAL 1200 cold paint stripper "PH 12-14 strongly alkaline"
Specially developed for modern powder coatings.
Can be used at temperatures up to approx. 35�°C. (The product evaporates more quickly at higher temperatures)
The product is ideal for parts made of iron, steel, aluminum, zinc, chrome, etc.
Call us and we will be happy to advise you
Winstrip 2 phase hot paint stripper Alu B
Size
5 litres
10 litres
25 litres
200 litres
Winstrip 2-phase hot paint stripper "for aluminum" Phase B "PH 10-12 alkaline"
Highly alkaline hot paint stripper. Used in the dipping process.
Very quickly removes dried KH, nitro and 2-component paints.
Suitable for removing paint from aluminum and metal parts.
Optimal effect at 40-80C, ideal for paint stripping systems.
Call us and we will be happy to advise you
Winstrip 2-phase hot paint stripper "for aluminum" Phase A "PH 10-12 alkaline"
Highly alkaline hot paint stripper. Used in the dipping process.
Very quickly removes dried KH, nitro and 2-component paints.
Suitable for removing paint from aluminum and metal parts.
Optimal effect at 40-80�°C, ideal for paint stripping systems.
Call us and we will be happy to advise you.
Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use.
Size
750ml
5kg
Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Zapon varnish is a colorless, non-yellowing protective coating for all bare iron and non-ferrous metals. The original appearance of the surface is not changed.
Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats.
Size
5 litres
10 litres
25 litres
Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats of paint. Works as a pore-spanning and sealing agent for highly absorbent substrates. On concrete, sandstone, cement, sand-lime brick, Eternit, plaster, etc. (Strongly crumbly substrates cannot be solidified.
Weight n/a
Size
5L, 10L, 25L
553 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
Fast-drying, water-clear and easily sandable wood primer for all hard and soft woods indoors.
Size
750ml
5 litres
25 litres
Fast-drying, water-clear and easy-to-sand wood primer for all hard and soft woods indoors. The pores are sealed so that the subsequent varnish has better filling properties. Protects the wood from moisture and prevents the varnish from sinking. For all wood and wood materials.
Winoil solvent-based insulating primer for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc.
Size
1 kg
5kg
10kg
20kg
Winoil insulating primer based on solvents for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Can be used as a primer outdoors. Wood can be insulated against the penetration of the wood's ingredients. Winoil insulating primer can be painted over with any conventional solvent-based or emulsion paint. Can be painted over after approx. 20 minutes. Color: White
Colorless special adhesion promoter (primer) for almost all types of plastics. Transparent for subsequent painting. Sand plastics and prime once with primer spray.
Well-adhering cutting oil foam for targeted application to the area to be worked on. Lubricates and cools cutting tools when drilling, thread cutting, turning, milling, sawing, etc. Extends tool life, water-soluble and washable with clean water. Biodegradable, free from chlorine, sulphur and mineral oils
Winstrip A2 KNG 300 pasty from Winoil is a ready-to-use, pasty paint stripper that is used to remove paint and adhesives
Size
1 litre
5 litres
15 litres
The product is suitable for both indoor and outdoor use. It dissolves practically all coatings and adhesives such as oil paints, synthetic resin, nitro, dispersion and stoving varnishes, 2-component and powder coatings as well as 2-component adhesives. It can be used on most surfaces, e.g. stone, wood, metals, etc. Plastic and rubber surfaces (PE, HPE, PP, PVC and natural rubber) can also be stripped/stripped, but preliminary tests are recommended.
For larger repairs to car bodies, boat hulls, fiberglass parts, plastic housings and sheet metal parts. Can be applied in several layers. Fast-curing, sandable, easy to use. Includes fabric and hardener. Polyester repair resin is a highly reactive polyester resin - suitable as a fiberglass laminate for repair purposes - adhesion to other polyester resins - adhesion to almost all metal surfaces. For repair purposes such as rust holes in metal surfaces, e.g. car bodies. For repairs to plastic parts e.g. bumpers, GRP parts.
DOSAGE: Add 2-3% by weight of hardener paste. Avoid overdosing the hardener paste. This can lead to bleeding and color changes in the top coat system. POT LIFE: At +20C room temperature, approx. 7 minutes. REACTION TEMPERATURE: at least +5C. APPLICATION: by brush YIELD: 3 times the mat weight or 1 time the fabric weight.
Rust protection film for the treatment of all metals.
For surfaces that cannot be provided with a permanent surface protection. Protection period: Up to 2 years when stored indoors, 6-10 months when stored outdoors.
Low prices!
Dyeing of all metal parts.
Work pieces dyeing with the dimensions of 2800 2000 1000 mm.
Colour palette according to RAL Product List.
We work with powder paints from the Turkish manufacturer.
Shockproof anti-corrosion coating that is resistant to mechanical damage.
Reliable electrical insulation , it cannot be affected by temperatures from -60°C to +150°C.
The coating is completely harmless to human health and safety and the environment, as at its formation any flammable and toxic substances are not applied.
Order our services!
Methyltrichlorosilane - cas 75-79-6. Monthly purchase –80 tons
Colorless (clear) liquid with a pungent odor, hydrolyzable with air moisture. Reacts with ethanol.
Physico-chemical properties of methyl trichlorosilane
The molecular weight 149.5
Density, g / cm3 1, 277
Mass fraction of basic substance, at least 99.6%
Mass fraction of chlorine, %, not less than 71.2
Mass fraction of impurities, 0.4%
Including - trimethylchlorosilane, not more than 0.05%
Including - dimethyldichlorosilane, not more than 0.4%
Including - 2, 2, 3-trimethylbutane and 2.4 dimethylpentane, not more than 0.05%
Boiling point, ° c 66, 4
Melting point, ° c -90
Auto-ignition temperature, ° c 408
Flash point, ° c 6
The refractive index of 1.4110
Methyl silica gel cas 68554-70-1 monthly purchase – 20-25 tons
Physical and chemical properties
Name of parameter, measuring unit
Appearance, color Hard, wet, white, fine granulated product
Testing item Quality index Measured value
Mass content of hydrogen chloride, %, no more 1, 0 0, 96
Mass content of nonvolatile substances, %, at least 60, 0 62, 0
Usage - production of polymer silicone products.
1K Winstrip KNL400 is a neutral, yet intensive, CHC-free cold paint stripper. Based on organic solvents, it is particularly suitable for removing several layers of paint and varnish in one dip.
Fast-drying primer for heavily used iron structures. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere.
Size
1 kg
5kg
20kg
The zinc dust primer contains micronized zinc dust and an epoxy ester resin as a binder base. The product has cathodic rust protection properties and also has a sealing effect. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere. The product can be used on sandblasted steel components and structures as corrosion protection, as well as for steel equipment, pipes and body parts
Winstrip KSG 650 paint stripper paste â??PH 1-2 extremely strongly acidicâ??
KSG 650 is a multifunctional thixotropic cold paint stripper based on solvents.
It is ideal for stripping wood materials.
Also ideal for all types of metals and non-ferrous metals.
Due to its thixotropic properties, it is suitable for vertical or upside down surfaces.
Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors
Size
1 litre
5 litres
15 litres
Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors. The product quickly and safely removes a wide variety of paint systems, e.g. air-drying epoxy paints, polyurethane paints, NC paints (nitrocellulose paints), acrylic paints, dispersions, wet primers and most conventional paints and corrosion protection primers. Winstrip-Gel KSG600 is ideal for stripping paint and stripping all types of wood and metal, such as aluminum, zinc, iron, etc. It is also suitable for non-ferrous metals such as copper, aluminum, zinc, bronze. The paint stripper is used for spray hooks, engine parts and for vehicles, trucks, car chassis, in boat building and for steel structures, etc. Winstrip-Gel KSG600 is safe to use and hardly drips on vertical surfaces or overhead due to its good thixotropic properties
Weight 4.93kg
Size
1l, 5l, 15l
553 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
