It's the enamel with antiquing effect for internal and external, based on lamellar micaceous iron-oxide, particularly suitable for the protection from the elements and the decoration of internal and external furnishing. The use of special corrosion inhibitors and the possibility of applying high thicknes-ses, allow to obtain excellent protection over time. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Application: metal and wood surface, plaster, doors, railings, gates, metal grates, metal cabinets, flashings, furniture, garden furniture.
RAD: it
s a special paint for the decoration and protection of all internal and external surfaces of heaters and radiators, resistant to 120 ' C. Suitable for home radiators, heat registers, electric convectors.
PAST.2 it's an acrylic enamel for the decoration and protection of all surfaces of all appliances, as washing machines, dishwashers, refrigerators, etc. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours.
A metallic enamel that has a particular brightness that looks similar to a mirror. It is adhesive and can be used on any material that is not non-stick (Polyethylene, etc..). Ambro-Sol Leafing is designed for indoor/outdoor use to brighten different surfaces and objects such as frames, furniture, iron, vases, mask, cups, medals, Christmas ornaments, etc. It is dry to the touch approximately 30 minutes after use and its completely dry approximately 1 hour after application. It does not provide protection from abrasions. Once applied handle with care.
This primer is designed to be used as the strong base coat to ensure the perfect adhesion of all enamel spray on diffi cult surfaces such as metal alloys and metals. It protects metal surfaces from rust. Also suitable as a fi ller in bodywork car sector for small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. For overcoating are required at least 24/48 hours. After use, it's advisable to spray for 2/3 seconds with the can upside down to avoid the block of the nozzle.
SHRUB COVER It's a formulate that gives high hiding power after just one coat to completely eliminate any stain at all by penetrating deep below the surface and then creating a seal for the prevention of new stains. Suitable for all stains caused by smoke on walls, mildew, and dirt in general. The STAIN COVER covers any stain when applied evenly over the area to be treated. The removal of particularly â??resistantâ?? stains may require repeated application of product always from a distance of 20-30 cm, paying attention to avoid runs. The product dries in 5-8 minutes if applied at a temperature of 20�°C.
Sku:V500COPRI
553 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
Wood stain formulated for deep penetration and long lasting protection. Made for interiors and exteriors, it suitable for protection of wooden products such as fixtures, matchboards, boats, garden furniture, and more. It effectively protects the wood from aggressive atmospheric conditions such as sun and water. It guarantees easy maintenance, even after long periods of time from the original application. It can be painted over or left as clean sheen allowing the natural grains and knots of the wood to be more visible and accentuated.
This paint is designed to be used as the base coat for a fi nishing enamels. It provides a strong base to ensure the perfect adhesion of the enamel spray on difficult surfaces such as plastics and metals. It protects metal surfaces from rust. On cars it covers small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. It dries on touch in roughly 15 minutes and dries fully in roughly 22 hours. For overcoating are required at least 24/48 hours. After use, it;s advisable to spray for 2/3 seconds with the can upside down, to avoid the block of the nozzle.
Bituminous tar-based insulating protector, ideal for giving protection from abrasion and stone hits to all those parts of the body that are particularly exposed. Resistant to atmospheric agents. Product suitable for any type of plastic, it does not require a primer. It dries to the touch in about 30 minutes and in depth in 24 hours. Before use, shake the can for at least 2 minutes.
AKFIX 1044 is a very fast set, 2-component, 100% solid flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. This general purpose aromatic pure polyurea has been especially designed to protect and coat concrete, metal, wood, ceramic, geotextile surfaces. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. Its extremely fast gel time makes it suitable for applications down to -20 �°C without special conditioning of the component resins and isocyanates. It is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.
%100 solid, VOC free, no solvents
No catalyst
Fast reactivity and fast return to service time
Seamless and joint-less coating
Little or no odor
Excellent thermal stability
Water resistant
Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc.
Excellent flexibility
Non sensitivity to temperature and humidity
Excellent chemical resistance
Excellent impact and abrasion resistance
Anticorrosive
Very good tensile and structural strength
UV, chlorine and saltwater resistant
High application thickness possible
Variable application thickness possible
Broad color spectrum
Protect your car paint from bird drops, scratches, stone chips, iron powder and UV
Enjoy the deep gloss shine that no other product can match
Good for two cars, also can be applied to motorcycles.
Higher hardness levels with flexibility.
Long life protection that lasts up to 5 years.
The handysand auto 2 is the latest innovative drywall sander, providing an outstanding working height of 7+ meters. Powerful 750watt motor, pressure release valve, ars technology (auto regulated suction) active on all versions and set ups
High quality lightweight polyester putty for car repairs – latest technology in putties.
- Creamy texture.
- Very low density.
- Extremely easy to mixing and apply.
- Exceptional sanding quality.
Color - Light Blue.
Gloss Grade – Matt.
Density – 1,00 kg/l.
Clear coat can be put on:
1. Basic colours,
2. Existing Paintwork in sound condition
Existing paintwork should first be dried, abraded and cleaned with a silicone remover.
For dulling the colour we recommended the following:
- grey unwoven abrasive fabric with dulling paste
-abrasive paper with gradiation of 600 to 8000 (for Dulling wet),
- abrasive paper with gradation of 360 to 400 (for dulling by machine).
IT 2007 varnish is two component acryic transparent lacquer with low content of volatile components. it is intended to profession use, in the 2:1 system. Hs Varnish creates the hard coat with the brillinat polish and fits for lacquer finishes of cars after all types of repairs.
Acmelight Company is specialized in production of luminous, fluorescent and invisible UV Light +óGé¼+ôclub lighting+óGé¼n++ paints. We produce:
10 types of Glow in the dark paints, 9 different colors. Such paints eliminate the light at the total darkness, without any lightening. As we use high-qualified Holland raw materials as the light-accumulating basis, luminous paints are able to eliminate the light not less than 10 hours. The light energy is accumulated both from the daylight and electrical one.
5 types of fluorescent paints, 7 different colors. These paints are very bright under the daylight, and it eliminates deep volumetric glowing under the UV +óGé¼+ôclub+óGé¼n++ lightening. We have developed out and introduced to production such paints, used not only for textile, flowers and glass, but also for wood, concrete and metal. That is why it opens really unlimited branches of its application. For those, who dreams about being the disco star, we have developed 7 colors of fluorescent nail polishes.
4 types of invisible paints, 3 different colors, glowing in neon lightening. Such paints are completely invisible at the daylight, but it glows deeply under +óGé¼+ôneon+óGé¼n++ light. These paints are good for painting walls in night clubs, laser show halls, bowling clubs. We also produce 3 colors of +óGé¼+ôcolorless+óGé¼n++ nail polishes and invisible paints for paper (for making watermarks), body, self-adhesive film, flowers and etc.
553 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
