Bituminous Sheets are premium waterproofing membranes manufactured using high-quality oxidized or modified bitumen reinforced with polyester or fiberglass mats. These sheets provide excellent resistance against water penetration, weathering, UV exposure, and temperature fluctuations. Widely used for waterproofing roofs, basements, foundations, tunnels, bridges, terraces, and other construction structures, bituminous sheets offer long-lasting protection and durability. Available in various thicknesses and finishes, they are easy to install and suitable for both residential and commercial applications.
the ordinary product cement is coming in different grades with strength varied from 22.5 N to 52.5 N. different types as CEMI, CEMII, CEMV. followed the European, American standard. as carbon emission the world focusing currently on blended cement type especially CEMII types which cover the required strength from 32.5 MPa to 42.5 MPa, with different types of additives like limestone, slag. as major we are agent for cement manufactures in T�¼rkiye, Algeria, Egypt, Oman, KSA we can supply different types of gray / white cement.
"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations.
B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.
an Angle Bar is a 90�° metal bracket used more commonly in roof trusses. Angle Bars can also provide resistance to corrosion on support beams and structural platforms.
Size:From 20x20x1.8mm to 250x250x36mm
11189 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
Type I
General purpose Fairly high C3S content for good early strength development General construction (most buildings, bridges, pavements, precast units, etc.)
Type II
Moderate sulfate resistance Low C3A content (<8%) Structures exposed to soil or water containing sulfate ions
Type III
High early strength Ground more finely, may have slightly more C3S Rapid construction, cold weather concreting
Type IV
Low heat of hydration (slow reacting) Low content of C3S (<50%) and C3A Massive structures such as dams. Now rare.
Type V
High sulfate resistance Very low C3A content (<5%) Structures exposed to high levels of sulfate ions
White
White color No C4AF, low MgO Decorative (otherw
RIF. 2011611
The Company is young, dynamic and, since 1998, manifactures and distributes bricks, stones, boards and facing bricks: a wide range of bricks for the construction of exterior and interior walls of impressive and high quality.
The new product realized by the Company is a BRICK EFFECT CLADDING INSULATION without thermal bridges. The system, thanks to the battens along the edge of the panel, doesn't create thermal bridges, allowing to obtain a perfect insulation of the building.
Reduced weight, locking panel and the included washer allow a quick and easy installation.
The perfect insulation obtained with this innovative system reduces the use of heating during the winter and the air conditioning in the summer, permitting for considerable energy and cost savings.
This highly innovative and unique product is the result of many years of experience in the field of building and technological research. The design of the product is RCD (Registered Community Design).
There is a large colour palette to choose from, to satisfy any kind of taste and style.
The Company wishes to get in touch with importers, wholesalers trading Companies and agents interested distributing the above mentioned product.
Rif.2011611
The Company is young, dynamic and, since 1998, manifactures and distributes bricks, stones, boards and facing bricks: a wide range of bricks for the construction of exterior and interior walls of impressive and high quality.
The products used are:
-BRICKS. They excel in durability, strength and corrosion properties. You can choose between Classical, Modern and Nostalgic style bricks.
-BRICK SLIPS. The particular characteristics of the clay used makes them frost-resistant and not efflorescent. The strips are available in the same colors of brick and allow to cover existing walls.
-NATURAL STONES. They have a thin thickness that reduces the product weight and the space for the application.
-ECOLITHOS RECONSTRUCTED STONES. They are a new ecological product made by natural raw materials.
There is a large colour palette to choose from, to satisfy any kind of taste and style.
The products are used in the following fields:
-Building and construction
-Decoration
-Insulation
More details of the product are available request.
The Company wishes to get in touch with importers, wholesalers trading Companies and agents interested distributing the above mentioned product.
The Company counts among the Italian producers of Sicilian marble, namely of the “perlato” and “perlatino” kind, which differs from other limestones for its peculiar crystallization and solidity and the total absence of porosity.
With a production capacity of more than 200,000 sqm/year of high quality marble, the Company is able offer its customers a very compact and beautiful product.
The Company offers the following kinds of marble:
Classic Perlato marble of Sicily: Fossiliferous limestone from the lower Cretaceous with a light ivory background and brown arabesques.
Compression breaking load 1075, Imbibition coefficient 0.330%, Wear index 4 mm/km, Weight per unit of volume 2,69.
Perlatino marble: Fossiliferous limestone from the lower Cretaceous with a beige/dark beige background and marked veins tending to orange. No “beads”
Compression breaking load Kg/cm2 1160, Imbibition coefficient 0.330%, Wear Index 4 mm/km, , Weight per unit of volume g/cm3 2,673.
Both products can be used for indoor and outdoor flooring and coverings, such as facades for palaces, buildings and hotels. They are water-repellent or oil-water-repellent.
The Company would like to export to importers/wholesalers as well as representatives/agents or trading companies worldwide.
Description: Pink coloured marble, with uniform background and slight brownish veinage. It may present some variations in terms of veinage.
Recommended use: Cladding, flooring and interior decoration.
Description: Dark brown coloured marble, presenting strong lighter veinage. This is a breccial type of stone.
Recommended use: Cladding, coverings and flooring.
We are pleased to offer you our granite tile products. Specializing in the sale of high-quality granite, we can provide you with a wide range of options. In addition, we offer competitive pricing and flexible delivery options. Our team is ready to provide professional assistance and advice at every stage of our collaboration.
If you are interested in our products, please let us know and we will be happy to provide you with detailed information about our products, prices, and delivery terms.
We offer black ice and gray
different size polished granite tiles
heat-treated bush hammered granite plates
granite slabs and strips
PVC Marble Wall Panel Production Line Multi Color PS Crown Moulding Corner Ceiling Moulding for Interior Decoration. European Palace Style Decorative Ceilings Classic Artistic Ceiling PS Ceiling Tiles.
