Water based paint with a ultra matt finish effect, suitable for both indoor and outdoor use. It's ideal for decorating any common surface such as metal, plastic, glass, ceramic etc. especially suitable for turning your old wood furniture into a vintage/modern piece of art. Fast drying finish, low VOC. After your application, when the paint is dry, It is advisable to add wax or transparent varnish which provides that protective layer on your newly modified piece
It is a multipurpose paint designed for indoor and outdoor use. It is dry to the touch approximately 15 minutes after use and its completely dry approximately 22 hours after application. It can be used on various surfaces including wood, metal, glass, ceramic, plastering, masonry, doors, furniture, radiators, ornaments, and other objects.
A special paint that temporarily changes the color of a surface. It can be used on non-porous surfaces. It creates a decorative, protective removable film and has a soft touch effect. The original surface remains intact after the painted surface has been removed. It can be used on cars, sports gear, furnishings and more. To apply, vigorously shake the bottle for at least 1 minute, until the marbles inside the can move freely. Carefully clean the surface before application. Keep a distance of 20-30cm/8-1 2in. Apply 4 to 5 crossed layers (horizontal and vertical), each one every 10-15 minutes. It will be completely dry approximately 2 hours after application
It is a high quality enamel with a modified silicone resin base, which allows you to renew all surfaces normally exposed to high temperatures. Heat resistant up to 300 C-700 C (check the Technical data sheet). Application: parts of heaters, stoves, ovens, chimney flues, barbecues, fire screens, motorcycle mufflers, etc. don't expose in direct contact with flames. Important: to obtain an optimal and long lasting result it is necessary for the painted parts to be exposed even if only once, to a temperature of at least 180 ' C; any less will make the hardening and adhesion of the enamel only partial. Clean carefully the surface before application and shake vigorously the can. After use, it's advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the nozzle.
It's a professional enamel spray that is resistant to scratches, alcohol and gasoline. Ideal for painting tractors and agriculture machines. Before applying this paint it is mandatory to use the suitable primer (V400PRIMER3 or V400PRIMER5)
It is a multipurpose paint designed for indoor and outdoor use. It is dry to the touch approximately 15 minutes after use and its completely dry approximately 22 hours after application. It can be used on various surfaces including wood, metal, glass, ceramic, plastering, masonry, doors, furniture, radiators, ornaments, and other objects
This primer is designed to be used as the strong base coat to ensure the perfect adhesion of all enamel spray on diffi cult surfaces such as metal alloys and metals. It protects metal surfaces from rust. Also suitable as a fi ller in bodywork car sector for small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. For overcoating are required at least 24/48 hours. After use, it's advisable to spray for 2/3 seconds with the can upside down to avoid the block of the nozzle.
SHRUB COVER It's a formulate that gives high hiding power after just one coat to completely eliminate any stain at all by penetrating deep below the surface and then creating a seal for the prevention of new stains. Suitable for all stains caused by smoke on walls, mildew, and dirt in general. The STAIN COVER covers any stain when applied evenly over the area to be treated. The removal of particularly â??resistantâ?? stains may require repeated application of product always from a distance of 20-30 cm, paying attention to avoid runs. The product dries in 5-8 minutes if applied at a temperature of 20�°C.
RAD: it
s a special paint for the decoration and protection of all internal and external surfaces of heaters and radiators, resistant to 120 ' C. Suitable for home radiators, heat registers, electric convectors.
PAST.2 it's an acrylic enamel for the decoration and protection of all surfaces of all appliances, as washing machines, dishwashers, refrigerators, etc. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours.
This paint is designed to be used as the base coat for a fi nishing enamels. It provides a strong base to ensure the perfect adhesion of the enamel spray on difficult surfaces such as plastics and metals. It protects metal surfaces from rust. On cars it covers small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. It dries on touch in roughly 15 minutes and dries fully in roughly 22 hours. For overcoating are required at least 24/48 hours. After use, it;s advisable to spray for 2/3 seconds with the can upside down, to avoid the block of the nozzle.
It's the enamel with antiquing effect for internal and external, based on lamellar micaceous iron-oxide, particularly suitable for the protection from the elements and the decoration of internal and external furnishing. The use of special corrosion inhibitors and the possibility of applying high thicknes-ses, allow to obtain excellent protection over time. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Application: metal and wood surface, plaster, doors, railings, gates, metal grates, metal cabinets, flashings, furniture, garden furniture.
It is the enamel that makes surfaces bright and visible from a distance, even in the absence of light. The fluorescent effect is brought out by applying AMBRO-SOL FLUORESCENT on a white background. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours.
It's a professional enamel spray ideal for for the paiting of rims wheels of motorcycles and cars. Thanks to its textured / embossed fi nish, this special paint is specifi c for repainting or renewing bumpers, side panels and spoilers.
PAINT REFILL DME Bottle filled with 300ml mix of solvents, propellants and additives. It is compatible with most paints: acrylic, nitro-acrylic, nitro-synthetic, nitrocellulose. The reseller adds the paint according to the required color. In case of special filling the color can slightly change. We recommend using the product soon after filling the paint
ODEPO offers you to:
- Become the distributor of a French-made paint in your markets,
- Create your own brand of paint,
- Supply you in large volume for real estate projects.
You're a :
- Wholesaler and/or distributor of construction / DIY products,
- Promoter / supply manager for construction sites,
ODEPO offers several ranges in:
- decorative painting
- Undercoat
- Large white Glycero or Acrylic
- Painting facade
- Multi-media painting
- Lasure and varnish ...
The production and quality "Made in France" has a price studied "major export."
Do not hesitate to come back to me to receive a price list, discuss your needs, your constraintsâ?¦.
Please note: This offer is not intended for the French market: EXPORT ONLY.
Weatherproof acrylic facade paint for exterior and interior works. Forms a durable coating. It is intended for painting of facades of houses. It has good adhesion and high hiding power. Means for porcelain of cement and clay bases, silicate and ceramic bricks, concrete, systems of thermal insulation of facades, DVP, a chipboard, QSB and OSB, a tree and wall-paper indoors. Vapor permeable.
Weatherproof acrylic paint for exterior and interior works. It is intended for painting of facades of houses, wearproof and moisture resistant coverings. Has good adhesion and high hiding power. Suitable for painting cement and gypsum bases, silicate and ceramic bricks, concrete, facade insulation systems, fiberboard, particleboard, QSB and OSB, wood and wallpaper indoors. Resistant to atmospheric factors. Vapor permeable.
Latex paint for interior works. Designed for painting walls and ceilings of cement, cement-lime, lime, gypsum, plasterboard, wood-derived materials, creates a smooth, durable coating with a silky-matte structure
Water-dispersion paint for interior works. It is intended for painting of walls and ceilings from cement, cement-lime, limy, plaster, gypsum cardboard, wood-derived materials. Has a high hiding power. Prevents wet wiping. Suitable for painting wallpaper.
WE offer best Quality Paints of leading European producers Hempel, Sigma , Jotun , PPG and others from Holland , Belgium and Germany.
Quaranteed best wholesale prices in Europe , we can offer also stocks.
Epoxsy , Polivinyl , Antyrust, Alkid
Boat paint
Construction stell paint
Wood and beton floor paints
Please send your inquiry and we answer ASAP .
We have full range of colors
A spray paint for marking masonry, pavements, asphalt, cement and wood. It is resistant to weathering and wear. It is available in fluorescent colors. The product comes with a special 360 valve, so it can be used in any position.
Ideal for creating general parking signs and signaling danger zones. To make visible the terms of reference such as siting, excavation, demarcation of maintenance works. It is resistant to weathering and chemicals. It can be used on numerous surfaces such as cement, asphalt, glass, wood, synthetic materials. Lines of high precision can be made with this product. The width of the line can vary from 4 to 6 inches depending on the setting. The length varies depending on the traveling speed and the porosity of the surface: 40-50 m.
Bituminous tar-based insulating protector, ideal for giving protection from abrasion and stone hits to all those parts of the body that are particularly exposed. Resistant to atmospheric agents. Product suitable for any type of plastic, it does not require a primer. It dries to the touch in about 30 minutes and in depth in 24 hours. Before use, shake the can for at least 2 minutes.
A metallic enamel that has a particular brightness that looks similar to a mirror. It is adhesive and can be used on any material that is not non-stick (Polyethylene, etc..). Ambro-Sol Leafing is designed for indoor/outdoor use to brighten different surfaces and objects such as frames, furniture, iron, vases, mask, cups, medals, Christmas ornaments, etc. It is dry to the touch approximately 30 minutes after use and its completely dry approximately 1 hour after application. It does not provide protection from abrasions. Once applied handle with care.
Wood stain formulated for deep penetration and long lasting protection. Made for interiors and exteriors, it suitable for protection of wooden products such as fixtures, matchboards, boats, garden furniture, and more. It effectively protects the wood from aggressive atmospheric conditions such as sun and water. It guarantees easy maintenance, even after long periods of time from the original application. It can be painted over or left as clean sheen allowing the natural grains and knots of the wood to be more visible and accentuated.
Silicone facade paint with high weather resistance and vapor permeability. Provides cancellation of long-term operation of a facade, gives to a surface dust-repellent and hydrophobic qualities. It is intended for painting in places with aggressive influence of environment and on facades warmed by mineral wool. Has good adhesion and high hiding power. Suitable for painting cement and gypsum bases, silicate and ceramic bricks, concrete, facade insulation systems, fiberboard, particleboard, QSB and OSB, wood.
Universal paint for facade and interior works. New generation paint with high adhesion, weatherproof and vapor permeable. Provides excellent long-term operation, gives the surface dust repellent and hydrophobic qualities. It is intended for painting in places with aggressive influence of environment, for wearproof coverings indoors with high surface loading.
2,400 10l jars (15.5kg)
37,200 kg (620 Kg / pal)
60 pallets / 40 pots per pallet.
0,70 / kg 26 040 euros
Interior / exterior water-based paint
Product label in German language
EXW (Belgium)
Mandatory export outside Europe
Extra strong coverage, very easy to paint
Toom's high-quality Comfort White impresses with its extra strong coverage and is ideal for interior painting jobs. Emulsion paint is very easy to work with and gives walls or ceilings a matte appearance after drying. It is available in different packaging sizes and certified by "Der Blaue Engel" and "Pro Planet". The paint bucket is also made from 100% recycled material.
ASPOL B-105 lamb is a ready-to-use, water-diluted, decorative stucco based on acrylic resin and quartz. It is used for making decorative and protective thin-layer coats both indoors and outdoors; it can be used to make insulation systems using the damp method on foamed polystyrene. It gives a (woodworm÷ effect to the applied plaster with 1.5 to 2.5 mm grain size. The texture is created using a stainless steel or PVC long float.
Other kinds of decorative plasters available: "woodworm" with 2-3 mm grain size and "mosaic" with coloured aggregate (marble, quartz). All the plasters are produced in white. Plasters may be coloured according to the palette of colours available upon request.
This paint, based on acrylic dispersion, is used for covering external facades. It can be used for coating mineral substrates: concrete, cement plasters, and cement-lime plasters that have not been painted before. After polymerisation, it forms a highly weatherproof coating. It protects the painted substrates against water penetration, at the same time enabling moisture and carbon dioxide to penetrate. On the surface, it creates a matt coating of high decorative values and high resistance to abrasion. The paint is produced in white. Paints may be coloured according to the palette of colours, available upon request.
Hotel staff is constantly required to be in uniforms be it the management or the kitchen staff, or even the
housekeeping. Remembering the kitchen clothing, we have fabricated this scope of extraordinary Chef Coats that are made of unique texture, to make the kitchen-head's work simple and comfortable. The dress is intended to check him out of the normal kitchen staff as the chef is considered as the leaders of the kitchen work. Our clients can get these coats prepared according to their given specifications.
Mens Wholesale Jackets & Coats, Including; Bomber, Denim And Utility Jackets, Macs, Puffas, Gilets And Wind Runners. Spring / Summer And Autumn / Winter Fast Fashion Clothing Stockists, Order Now For Next Day Delivery.
Product Description :
- We design, manufacter, stock and distribute mens bomber jackets. You can relabel our current stock, design your own made to order garments or purchase stock straight from our warehouse by selecting from over 2000+ in-season styles.
No minimum order on stock of mens bomber jackets, please see our website for more information.
Minimum 200+ units to relabel current styles of mens bomber jackets, depending upon the garment.
Minimum 400+ units to design and manufacture your own garments.
Price of product ( USD price or FOB price) : - Register on our website for prices of stock, or contact us for custom requests.
Product origin : Various - China, India, Turkey, Pakistan
Key Specifications/Special Features :
- In Stock: purchase wholesale stock from our website
- Relabelling: add your branding to stock
- Made To Order: design and manufacture your own specification
Minimum Order Size and Packgaing details :
- In Stock: No MOQ
- Relabelling: Starting at 200 units MOQ
- Made To Order: Starting at 400 units MOQ
Two layer soft shell jacket with a front zip fastening and inner storm flap. Pockets: two lower front hip pockets with zip fastening. Bungee shock cords and adjuster on the hem. Elastic on the cuffs. Sewn on reflective tape.
