Find Verified Electronic Batteries Suppliers, Manufacturers and Wholesalers

*Features:

- Best Engineering Plastic Injection
- Molding Body
- UV - Resistant Cabinet Material
- 100% Usable in Outdoor

*Best high torque motor

- 100% maintenance free
- 100% dust & moisture proof
- Serves upto 80% Electricity Bill
- Can be used non stop up 24 Hrs.

*How it works?

Evaporative cooling is a physical phenomenon in which evaporation of a liquid, typically into surrounding air, cools an object or a liquid in contact with it. Latent heat describes the amount of heat that is needed to evaporate the liquid; this heat comes from the liquid itself and the surrounding gas and surfaces. When considering water evaporating into air, the wet-bulb temperature, as compared to the air\'s dry bulb temperature, is a measure of the potential for evaporative cooling.

The greater the difference between the two temperatures, the better the evaporative cooling effects. When the temperatures are the same, no net evaporation of water in air occurs, thus there is no cooling.

*Applications :

- Plant or Factory
- Leather Industries
- Showroom
- Farm House
- Canteen
- Warehouse
- Prining Press
- School, Colleges, Office
- Plasic Moulding Industry
- Iron Industry
- Engineering Industrial
- Electronics Industry
- Hotel & Restaurant
- Paper Industries
- Textile Industries

*Extraordinary features & benefits of BlowTech Air Washer Unit

-5090 Honey Comb - Cellulose Wet Pad# World\'s Best Quality Pads imported from Finland with Anti Bacterial Resins & 4X Longer Life than
any other Pad (last upto 5 yrs.*)

4D Technology (Top & Bottom Discharge)
- BLOWTECH is the only brand which gives 4D Cooler in movable & ductable Coolers.

Turbo Axial Fan#
- BLOWTECH is the only brand which gives Turbo Axial Fan for worlds most powerful air through & very low noise

We introduce ourselves as a reputed company involved in  the export of copper wires and conductors from India. Our copper wires are manufactured in the industrial township of Bhiwadi, situated about 70 kilometres west of Delhi , in the district of Alwar, in Rajasthan state. Our corporate office is located in Gurgaon.

Our company, namely RIAN GLOBOTECH ,  draws copper wires from 8mm CC Copper Rods. We have a capacity to supply 3000 tons per year.  We have a good share of the Indian market, which has been possible to achieve only through adherence to quality, and timely delivery and accurate logistics. 

We offer the following in copper wires :
1. Bare Copper Wire
2.  Tin Coated Copper Wire

The above wires are offered as :
1. Single Wire
2. Bunched Conductor
3. Bunched and Stranded Conductor

Our range of Bare Copper Wire is manufactured in various diameters from 0.10mm to 4mm , and is  used in electrical and electronics applications. The wires are drawn from 8mm CC copper rods  of very high purity cadmium free type also called Electrolyte Copper which is 99.99 % pure. Bare copper wire when bunched and twisted forms the primary part of electrical cables which are used as  overhead power source for subways, light and heavy transit systems, electrically powered mine trains, buses, and industrial cranes, and also wiring through conduits.

We are interested primarily in long term contract supplies for both Indian and overseas markets.

For your manufacturing of electrical cables, we can supply copper wires on a regular basis. Prices can be offered on a daily LME based formula basis plus the drawing and packing charges.

We eagerly look forward to receive a positive response from your side.

Product Details:

Instrument Name EPOC
Brand Siemens
The epoc Reader and Host2 Mobile Computer devices work together to bring you the right result at the right timeThe nearly instantaneous delivery of BGEM (blood gases, electrolytes, and metabolites) results at the bedside enables you to make immediate treatment decisions that may lead to improved patient outcomes Simply insert the Test Card into the epocReader and obtain a blood sample from the patientOnce fresh blood passes across the biosensors on the epoc Test Card, results are sent to the epoc Host2 Mobile ComputerWith the optional EDM System and LIS interface components, the test result is then wirelessly transmitted instantly over your existing Wi-Fi network to your EDM, LIS and EMR

Benefits

Auto-scans Test Card Barcode for simplified quality complianceIncorporates automated, integrated calibration and quality checks and fully portable; AC/rechargeable batteryDoes not require a committed blood sample for Test Card calibrationConnects wirelessly and integrates easily with your facility''s existing networkDelivers accurate, bedside results in about 3 minutesCritical result management with electronic documentationIntegrated 1D (2D-ready) Barcode ScannerEasy-to-use Operator/Patient/QC lockoutsCustomizable web-based epoc Host software and LIS/HIS/EMR connectionImprove documentation and results management

Specifications11 Analytes on 1 Test Card pH, pCO2, pO2, Na , K , Ca , Cl-, Glu, Hct, Lac, and CreaCalculated values cHCO3-, cTCO2, BE(ecf), BE(b), cSO2, cHgb, eGFR, eGFR-a, AGap, and AGapKRoom temperature test card storageCritical result reportingTest Card and patient ID bar codingTest with 92 L fresh whole bloodOperator / EQC lockoutsTransmit results securely in real time

Performance and Features of GX 1530 CNC Router

• Heavy duty frame structure
• X, Y and axis are driven by AC SERVO motor (JAPAN) which gives more accuracy and speed than our LX Series and RX Series CNC Routers
• High positional accuracy, heavy work load and long life is ensured by HIWIN brand 30 mm square linear guidways.
• Original Italian spindle gives you very stable, trouble-free, maintenance-free performance for long period of time.
• Fast speed and high accuracy ensured by gear transmission equipped on CNC router.
• Periodic lubrication maintenance provided by Automatic Lubrication System which gives long life to mechanical parts.
• If any electronic part gets damaged during running operation, Auto Stop Mode Function stops the machine and so the tool or material doesn't get damaged.
• Axis drive system: X, Y - Rack. Z - Ball Screw.
• Working table is covered with rigid PVC sheet for long life of aluminum T slot table.

Technical specifications

Model: GX - 1530 V ATC
Outer Dimension: 3065 x 3660 x 3683 mm
Working Area (X, Y, Z): 1500 x 3000 x 300 mm
Spindle: 7.5 KW (Optional 10kw & 12 kw) (HSD Italian)
Spindle Speed: 24000 RPM
Maximum Traveling Speed: 45 mtr/min
Automatic Tool Changer: BT30 ISO30, 8 Positions
Material Holding: Vacuum Combined T-slot
Weight: 2500 Kg
Power Supply: AC 440V/3PH


Application : Heavy duty application, high speed, like wooden industries, high speed 3D carving, flush door manufacturing, etc.

The EV battery modules electric vehicle provides the necessary voltage, energy, and power for an electric vehicle's operation.

Soundon New Energy ev battery module are primarily used in electric commercial trucks, high-duty electric trucks, special electric trucks, and electric tractors. These electric car battery module ensure reliable performance and efficiency, making them crucial for various heavy-duty and specialized electric vehicle applications.

TYPES OF EV ELECTRIC VEHICLE BATTERY MODULE

SEPNi8688190P-17.5Ah (4P/5P) EV Battery Module
The module utilizes high-energy-density pouch cells. It offers various capacities, such as 3.7V70Ah and 3.7V87.5Ah, making it suitable for electric commercial trucks and special vehicle applications, ensuring efficient energy storage and performance.

SEPNi11217127P-32Ah EV Battery Module
A 32Ah electric vehicle (EV) truck battery module stores substantial energy, making it ideal for electric trucks and heavy-duty vehicles. It functions as a single cell within a larger battery pack, providing reliable power and efficiency for demanding transportation applications.

SEPNi11100302P-50Ah EV Battery Module
This EV battery module, with a 50Ah capacity, is designed for integration into an electric vehicle's battery pack. It features advanced technology and robust construction, ensuring reliable power output. It offers a higher capacity, supporting longer driving ranges and the efficient operation of electric vehicles. With its superior performance and durability, this module contributes to the enhanced performance and sustainability of electric vehicles.

ADVANTAGE OF EV ELECTRIC VEHICLE BATTERY MODULE

Energy Density
This refers to the amount of energy that can be stored in the battery per unit volume or weight. Higher energy density allows for longer driving ranges.

Power Density
Power density is the amount of power that can be delivered by the battery modules electric vehicle and electric car battery cell per unit volume or weight. Higher power density enables faster acceleration and better performance.

Cycle Life
Cycle life is the number of charge-discharge cycles a battery can undergo before its capacity degrades significantly. Longer cycle life means the battery will last longer before needing replacement.

Charging Speed
The rate at which a battery can be charged affects the convenience of using an EV. Faster charging speeds reduce downtime and improve the practicality of electric vehicles.

BPI's rechargeable lithium ion polymer battery deliver high energy density and powerful performance, with platform voltages above 3.7V and continuous discharge rates of 10C-20C. They feature low self-discharge and superior safety thanks to aluminum-laminated soft packaging, which eliminates explosion risks. With a long cycle life exceeding 500 cycles and over 1000 for wide-temperature models they offer outstanding durability. Designed to operate from 20C to 60C, and up to 40C to 85C for extreme conditions, our batteries ensure stable performance in harsh environments. Lightweight and customizable in shape and size, they are produced on automated lines for excellent consistency and reliability.

BPI Lithium-ion Batteries: High Energy Density, Long Lifespan, and Versatile Applications
High energy density and high platform voltage, over 3.7V on average. Support high rate discharge some models can achieve continuous discharge of 10C-20C, and instantaneous pulse is higher, low self-discharge rate

Key Features
650Wh/L High Density
Industry-leading energy density, smaller size, and longer battery life

1000 Long Cycles
80% capacity retention after 1000 cycles, doubling the lifespan

10C Ultra-Fast Charging
Charges to 80% in 6 minutes, 3 times faster charging speed

Explore Our Lithium Polymer Batteries Range

High-Rate Li-Po Batteries
Customizable shapes to fit various device requirements, supporting high-rate discharge to deliver robust power for applications requiring instantaneous peak performance.

High-Voltage Li-Po Batteries
Providing lightweight power solutions for premium portable devices. Effectively reduces cell count and total weight in space-constrained designs.

Fast-Charge Li-Po Batteries
It can be fully charged in 5 minutes and has a high energy density. It also offers a 1000-cycle life and a 5-year service life to meet continuous commercial use.

Li-Po Battery Packs
Designed specifically for smart home devices, healthcare products, and applications with stringent weight and form factor requirements.

Standard Li-Po Batteries
A reliable, cost-effective single-cell battery solution that delivers balanced performance for a variety of devices, including Bluetooth speakers and handheld scanners.

Low-Temp Li-Po Batteries
Even at -30C, it can retain more than 70% of its capacity, providing powerful power for aerospace, polar research and other applications.

Wide-Temp Li-Po Batteries
With an operating temperature range of -40C to 85C, it is suitable for various extreme environments.

High-Temp Li-Po Batteries
Exceptional high-temperature performance with 97.6% discharge efficiency at 80C, while maintaining 86.2% discharge efficiency at -10C.

Based on domestic market and expand overseas business is our development strategy for Motorcycle Battery Connectors,2-wire Battery Connector,8 Pin Battery Connector. Welcome consumers from all over the world to negotiate with us for organization and long-term cooperation. We will become your reputable partner and supplier in the automotive field and accessories in China. The product will supply to all over the world, such as Bahrain ,Romania ,Mexico ,Svalbard and Jan Matin ,Solomon Islands . Profession, Devoting are always fundamental to our mission. Satisfaction and good credit to every customer is our priority. We promise that, as your ideal partner, we will develop a bright future with you with persistent enthusiasm, never-ending energy and enterprising spirit, and enjoy satisfactory results. You will instantly feel our professional and attentive service.

Battery Ground Connector
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology for Battery Ground Connector,8 Pin Battery Connector,4S Battery Connector. We will empower people by communicating and listening, setting an example for others and learning from experience. The product will supply to all over the world, such as French Polynesia ,Haiti ,Portugal ,Saudi Arabia ,Guatemala . The company adheres to the business philosophy of "honesty, cooperation and co-creation, people-oriented, cooperation and win-win". We provide high-quality solutions, reasonable prices and good service. We all significantly promise:Csame excellent, better selling price; exact selling price, better quality. Welcome to join us!

Suitable for fine grinding of various new nanomaterials. It is the most ideal model in the electrode material industry. Its unique discharging method ensures the quality and safety of the product. stability. For materials with medium and high viscosity, it has considerable advantages. The discharge screen is placed at the rear, which solves the problem of easy clogging and difficult cleaning when discharging. The entire grinding chamber is easy to disassemble and clean.

Features of Diaphragm/Battery Slurry Coating Nano Sand Mill Series

1. Motor: permanent magnet synchronous motor/three-phase asynchronous motor

2. Transmission mode: The motor drives the pulley for transmission

3. Discharge method: centrifugal discharge

4. Grinding and dispersion structure: Rod pin type

5. Cooling method: The grinding barrel is cooled by double-layer cooling water circulation, and the machine seal coolant is cooled by an auxiliary ring

6. Control system: The human-machine interface is independently controlled, with material temperature, pressure control, cooling water temperature; machine seal liquid level pressure, temperature, liquid level control; real-time monitoring of motor temperature

7. Sound and light prompts: When a sensor detects an abnormality in the grinder, the grinder will stop running, the sound and light alarm will alarm, and the human-machine interface will Detailed alarm information is prompted

8. Grinding chamber: inner cylinder silicon carbide

9. Features: narrow particle size distribution, high efficiency, ultra-low energy consumption

As one of sand mill manufacturers, we will do our best to meet all the needs of customers.

The Battery Cell Simulator is used for the examination of battery measurement modules of the 2511 series, which are used in battery module installation (WE testing, BoL, EoL). The Battery Cell Simulator is able to emulate a battery cell of various technologies by means of a resistance and an open-circuit voltage simulation. The resistance simulation simulates the purely ohmic resistance of a cell. The resistance and voltage values can be defined from standard values as well as customised values.

To be able to examine the repeatability of a 5-channel battery measurement module model 2511, only a Battery Cell Simulator model 2500-Z100 is required.

The Battery Cell Simulator is operated via 24 VDC. The LED on the front signals the different operating states..

The INR21700-45E Cylindrical Lithium-ion Battery is engineered for high-drain applications that require outstanding energy density, stable discharge performance, and long-term reliability. With a typical capacity of 4500 mAh, this 21700 lithium-ion cell is widely used in electric vehicles, e-bike battery packs, cordless power tools, portable energy storage systems, and various industrial devices.

Designed for both consumer and commercial applications, the INR21700-45E offers a perfect balance of power output, safety, and cycle life, making it one of the most versatile solutions for battery manufacturers and OEM projects.

Key Features of INR21700-45E Battery Cell

High-capacity 4500 mAh design ideal for high-drain devices and continuous power output.

Stable and reliable 21700 cylindrical lithium-ion battery with excellent energy density and heat management.

Perfect for EV battery packs, power tools, e-bike / scooter batteries, and DIY battery projects.

Supports OEM / ODM customization, including custom battery packs, configurations, and branding.

100% tested for capacity, internal resistance, and cycle performance to ensure consistent quality.

Compliant with global safety standards, suitable for worldwide shipment and large-scale manufacturing.

Ppcp battery regrind scrap ready to ship

Chemical properties: Colorless viscous liquid or light yellow transparent glassy particles, odorless, tasteless, tough and plastic. Relative density d4201.191, refractive index 1.45~1.47, softening point about 38â??. It is insoluble in fat and water, but soluble in ethanol, acetic acid, acetone and ethyl acetate. It is stable to light and heat, and will decompose into acetic acid when heated above 250â??. There is no acute poisoning in mice when taking 10g/kg orally, Adl0~20mg/kg (Shanghai). Use: As a gum base, my country stipulates that it can be used for emulsified flavors and gum, and the maximum usage is 60g/kg. Uses: Used in the manufacture of toy plush and non-woven fabrics. Uses: Used as the raw material for polyvinyl alcohol, vinyl acetate-vinyl chloride copolymer, vinyl acetate-ethylene copolymer, and also used in the preparation of coatings, adhesives, etc. Uses: Mainly used as coatings, adhesives, paper, chewing gum bases and fabric finishing agents, and can also be used as the raw material for polyvinyl alcohol and polyvinyl acetal. Uses: Basic gum base for gum; fruit coating agent, which can prevent water evaporation and play a role in preservation. Uses: Thermoplastic resin, which is hydrolyzed into polyvinyl alcohol in acid or alkaline solvents and is the main raw material for the preparation of polyvinyl alcohol. When the molecule contains a photosensitizer, it is sensitive to light and decomposes under the action of ultraviolet light or electron beams, and has the characteristics of positive photosensitive resin. Polyvinyl acetate can be dissolved in a variety of organic solvents and can be copolymerized with a variety of monomers with double bonds, thereby introducing various functional groups with different properties. It is often used as an adhesive. Uses: Used as the raw material for polyvinyl alcohol, vinyl acetate-vinyl chloride copolymer, vinyl acetate-ethylene copolymer, coatings, adhesives, bubble gum, etc.

The product is a colorless and transparent new polymer materials, a variety of different viscosities (5cps ~ 2million cps), the liquid from flowing easily into a thick semi-solid material. This product has a special smoothness, softness, hydrophobicity, good chemical stability, excellent electrical insulation and resistance to high temperature. High flash point, low freezing point, long-term using between -50 C ~ +200 C, low viscosity-temperature coefficient, high compression ratio, low surface tension, water-repellent moisture resistance, low heat conduction coefficient.
Because it has special and excellent physical and chemical function, it can be used in many different industries:
1. Cosmetic industry for skin care cream, bath gel, shampoo and other cosmetic formulations with excellent softness and silky feel.
2. Rubber, plastic, latex, polyurethane, light industry: as a model release agent, brightener agent and release agent of some rubber, plastic, latex, polyurethane products and handicraft production.
3. Machinery, automotive, instrumentation, electronics and other industries used as high-grade lubricants, liquid springs, cutting fluids, buffers oil, transformer oil, high temperature brake fluid, brake fluid, instrumentation damping oil, mold release agents and other modeling framework.
4. Textile, apparel industry as a softener, water repellent, feel modifiers, sewing thread lubrication, chemical fiber spinneret pressure lubrication and clothing lining additives.
5. Add it to other additives in leather and leather chemicals industry, it can be used as softeners, water repellent, feel agents, defoamers, brighteners.
6. Pharmaceutical, food, chemical, paint, building materials industry as defoamers, lubricants, and other weather-resistant paint.
7. Other specific purposes and other new materials.

JMR Brass Industries is leading manufacturer, exporter, and supplier of a superior quality range of LPG Mixing Tubes. These are broadly used in the areas where high capacity and advanced temperature are required. These are robust, tough and easy to use products. Each of our products is featured with cast construction with flanged connections for minimal pressure.

The burner top is made from using high-quality brass, procured from reliable vendors. Clients can obtain our burner tops in different sizes and finish as per their requirements. We coat Gas Stove Brass Burner with anti-corrosive materials and offer to clients at the affordable prices.

Brass LPG Gas Stove Burner Cap Set of 2 ( Big & Small ) Suitable For All Brands Gas Stove

How it works?
Brass is an alloy of copper and zinc which looks more beautiful in gold color. They�¢??re perfect for both outdoors and indoors because it can withstand even in unpleasant conditions. The major advantage of using this brass burner is that it provides superior heat and distributes evenly to the pots or containers for cooking delicious food.
Pros:
Easy to setup.
Corrosion resistant.
Highly durable nature.
Can withstand weather conditions �¢?? rain and cold.
Standing Pilot
Some of the gas burner gas stoves do come with standing pilot option. It means that the flame constantly burns under the cooktop. As it generates the flame constantly, consumes more energy than other gas stove models. Moreover, it comes in a simple design structure
ISI is abbreviated as Indian Standard Institute. It is actually a standard certification mark in India developed by BIS- Bureau of Indian Standards. It is mandatory to have ISI- certified for certain products to sell in India, especially the electrical and electronic home appliances- switches, cables, motors, heaters, etc.

JMR Brass Industries is leading manufacturer, exporter, and supplier of a superior quality range of LPG Mixing Tubes. These are broadly used in the areas where high capacity and advanced temperature are required. These are robust, tough and easy to use products. Each of our products is featured with cast construction with flanged connections for minimal pressure.

The burner top is made from using high-quality brass, procured from reliable vendors. Clients can obtain our burner tops in different sizes and finish as per their requirements. We coat Gas Stove Brass Burner with anti-corrosive materials and offer to clients at the affordable prices.

Brass LPG Gas Stove Burner Cap Set of 2 ( Big & Small ) Suitable For All Brands Gas Stove

How it works?
Brass is an alloy of copper and zinc which looks more beautiful in gold color. Theyâ??re perfect for both outdoors and indoors because it can withstand even in unpleasant conditions. The major advantage of using this brass burner is that it provides superior heat and distributes evenly to the pots or containers for cooking delicious food.
Pros:
Easy to setup.
Corrosion resistant.
Highly durable nature.
Can withstand weather conditions â?? rain and cold.
Standing Pilot
Some of the gas burner gas stoves do come with standing pilot option. It means that the flame constantly burns under the cooktop. As it generates the flame constantly, consumes more energy than other gas stove models. Moreover, it comes in a simple design structure
ISI is abbreviated as Indian Standard Institute. It is actually a standard certification mark in India developed by BIS- Bureau of Indian Standards. It is mandatory to have ISI- certified for certain products to sell in India, especially the electrical and electronic home appliances- switches, cables, motors, heaters, etc.

IRM-30 is a 30 W micro converter (69.5 Ã? 39 Ã? 24 mm) for various electronic devices and industrial automation equipment. It supports an input voltage range of 85â??305 VAC and uses 94V-0 flame-retardant materials for high thermal efficiency. The PCB installation type provides surge protection up to 3G, while the terminal type supports surge protection up to 5G. It also provides basic protection and waterproof functions. Efficiency reaches up to 90%, with no-load consumption below 0.1 W, helping meet low-power-consumption requirements for electronic products. The series is a Class I design (no FG pin), integrates EMI filter components, complies with BS EN/EN55032 Class B, and offers electromagnetic compatibility characteristics. In addition to module types, the IRM-30 series provides terminal-type (ST) models.

What Items Can Be Sterilized in Lab Autoclaves?
Lab autoclaves are essential for sterilizing a variety of items to ensure a contamination-free environment. Common items that can be sterilized include glassware (such as beakers, flasks, and petri dishes), metal instruments (like scalpels and forceps), and certain types of plasticware that are autoclave-safe. Additionally, lab media, solutions, and biological waste can also be sterilized. It's important to note that not all materials are suitable for autoclaving; items like heat-sensitive plastics, certain chemicals, and electronic devices should be excluded. Always consult the manufacturerâ??s guidelines to ensure proper and safe autoclaving procedures.

What Items Can Be Sterilized in Lab Autoclaves?
Lab/Pharmaceutial Autoclaves

How Do laboratory autoclave Work
Lab autoclave sterilize equipment and materials using high-pressure saturated steam. The process begins by placing items inside the autoclave chamber, which is then sealed. Water is heated to produce steam, which displaces air in the chamber. The steam reaches temperatures of 121-134C (250-273F) and pressures of 15-30 psi. This high-temperature steam penetrates materials, effectively killing bacteria, viruses, fungi, and spores. The sterilization cycle typically lasts 15-30 minutes, depending on the load and type of materials. After the cycle, the chamber depressurizes and cools, allowing safe removal of sterilized items.

FAQs of Lab Autoclaves
Q
How Often Should a Lab Autoclave Be Serviced?

A
Regular maintenance is crucial for the proper functioning of a Lab Autoclave. It is generally recommended to have it serviced annually by a qualified technician, but the frequency can vary based on usage and manufacturer guidelines.

Q
What Are the Safety Precautions When Using a Lab Autoclave?

A
Safety precautions include wearing protective gear, ensuring the autoclave is properly sealed before operation, not overloading the chamber, and allowing items to cool before handling them.

Features:
â?� Large touch screen
â?� Powerful functions like weighing, parts counting, percent weighing, check weighing, animal weighing, density
weighing, etc.
â?� Standard anti-static module
â?� 0.01mg maximum weighing range 100g
â?� Electronic level adjustment indicator module
â?� GLP/GMP