Premium-quality fresh herbs cultivated using sustainable agricultural practices and harvested at peak freshness. Our herbs are carefully cleaned, sorted, and packed under hygienic conditions to preserve their natural aroma, flavor, color, and nutritional value. Suitable for culinary use, food processing, seasoning, pharmaceuticals, herbal teas, and cosmetic applications. Available in multiple herb varieties and customized packaging for export.
ES SG2 is a bare Mn-Si-alloyed G3Si1/ER70S-6 solid wire for the GMAW of non-alloyed steels, as used in general construction, automotive components, pressure vessel fabrica tion and shipbuilding.
ES SG2 taking MAG welding oper-ations to new levels of performance and all-round ef�ciency, especially in robotic and mechanised welding. Characteristic features include excellent start properties; trouble-free feeding at high wire speeds and lengthy feed dis- tances; a very stable arc at high welding currents; extremely low levels of spatter; low fume emission; reduced contact tip wear and improved protection against corrosion of the wire.
ES 71T1C is a Fux-cored, tubular wire for all-positional welding using either Ar/CO2 or CO2.
The wire is suitable for all mild and medium tensile structural steels.
The running characteristics are exceptional, using the spray mode of transfer, and this applies equally to both shielding gases. ES 71T1C is also universally approved to grade 3 by all major authorities.
ES MIG 80S-G is a 0.5Mo-alloyed, solid wire for the GMAW of creep-resistant steels of the same composition, like those used for pipes in press-ure vessels and boilers with a service tempera-ture of up to 500�°C.
ES MIG 80S-G is taking MAG welding operations to new levels of performance and all-round ef�ciency, especially in robotic and mechanised welding.
Characteristic features include excellent start properties; trouble-free feeding at high wire speeds and lengthy feed distances; a very stable arc at high welding currents; extremely low levels of spatter; low fume emission; reduced contact tip wear and improved protection against corrosion of the wire.
ES S221 is our bronze (brass) brazing rod with excellent fluidity used for joining and surfacing steels, grey and malleable cast iron, copper, bronze, brass and nickel and nickel alloys.
Suitable for locksmithing, manufacturing and repairing of metal bodyworks, pipe joints and galvanized sheets, manufacturing and repairing of hydraulic equipment, and for ornaments, jewelry, etc.
Specially formulated to include tin which offers better mechanical properties and good corrosion resistance.
ES S221 produces poreless joints, color matching with brass.
ES 309MoL-17 is an over-alloyed, stainless-steel electrode for use as a buffer layer when welding acid-resistant clad steels and stainless steels to other types of steel.
ES 309MoL-17 has outstanding welding properties on both AC and DC.
The electrode can be used in all positions apart from vertical down
Bare, corrosion-resistant, chromium-nickel-man-ganese welding rods for welding austenitic stainless alloys of the 18% Cr, 8% Ni, 7% Mn types. ES TIG 307 has general corrosion resistance similar to that of the corresponding parent metal.
The higher silicon content improves the welding properties such as wetting. When used for joining dissimilar materials, the corrosion resist-ance is of secondary importance.
The alloy is used in a wide range of applications across the industry, such as the joining of austenitic, man- ganese, work-hardenable steels, as well as armour plate and heat-resistant steels.
ES SG3 is a bare Mn-Si-alloyed G4Si1/ER70S-6 solid wire for the GMAW of non-alloyed steels, as used in general construction, automotive components, pressure vessel fabrica tion and shipbuilding.
It has a slightly higher manganese and silicon content than ES SG2 to increase the weld metal strength.
This also promotes a low sensitivity to surface impurities and contributes to smooth, sound welds.
ES SG3 taking MAG welding operations to new levels of performance and all-round ef�ciency, especially in robotic and mechanised welding.
Characteristic features include excellent start properties; trouble-free feeding at high wire speeds and lengthy feed distances; a very stable arc at high welding currents; extremely low levels of spatter; low fume emission; reduced contact tip wear and improved protection against corro- sion of the wire.
ES 8018-G is a NiCu-alloyed LMA electrode, which deposits a weld metal with good corrosion resistance to sea-water and ï¬?ue gases, for the welding of weatherproof steel and for shipâ??s hull structural steel.
The weld metal has excellent mechanical properties.
It is particularly suitable for welding the shell plating of ice-breakers and other ships, which work under conditions where the protective paint coating wears off.
ES HF 40 Mainly be used for surfacing sealing surface of high pressure valves that work temperature below 600C .
Depend on elements of Si, Mo, Nb, Ni, V to intensify the deposited metal to be a kind of austenite matrix which with few ferrites and it has higher high temperature hardness,good heat stability and it has good performance of high temperature abrasion-resisting, heat fatigue resistance and erosion resistance.
The deposited metal will be the longer of the aging time the better the abrasion-resisting and more hardness.
Notice:
* The rod should be redrying at 250 �°C for 1 hour before use.
To guarantee hardness, the deposited metal should not be lower than 5 mm after machining & should not be too high to avoid cracks.
ES HF 40 is suitable for surfacing sealing surface of high-pressure valves that work temperature below 600 C.
The deposited metal has good performance of high temperature abrasion-resisting, good erosion resistance, good heat stability, good heat fatigue resistance and it has higher high temperature hardness.
The deposited metal has obvious effect of aging time intensifying.
Notice:
* The rod should be redrying at 250 C for 1 hour before use.
To guarantee hardness, the deposited metal should not be lower than 5 mm after machining & should not be too high to avoid cracks.
ESWECO is renowned for (Metal) cutting tools and is committed to providing the highest cutting performance and most productive cutting solutions in the market.
ESWECO has a powerful product range of abrasive cutting and grinding discs.
Bonded abrasives from ESWECO have been designed to make your work easier, quicker, and more efficient.
No matter whether you are looking for grinding and cutting discs, cup wheels, or grinding rings quality is always our priority.
Excellent cutting performance, low vibration while cutting, and minimum wear of the discs to secure a long product life and low-cost impact.
Our cutting and grinding discs follow the highest safety requirements in the market.
The range full fills in discs suitable for all steel materials and a wide variety of stone-based building materials.
They can be used to cut workpieces made of metal, stone, and stainless steel.
