Find Verified Dry Fruit Boxes Suppliers, Manufacturers and Wholesalers

Various types of fresh peaches. Peaches of any size are available. We can agree on packaging and other conditions that suit you.

For dry / sensitive skin.

Extracts of green tea, passion fruit, aloe vera.

Azerbaijan has a variety of advantages to successfully develop its fruit and vegetable sector, including geographical location and favorable climate. Climatic conditions enable Azerbaijani growers to harvest their crops several times a year and significantly extend their fruit and vegetable season. In addition, Azerbaijan has an advantage of relatively low production costs again thanks to climatic conditions and rather low labor costs.
Exported Azerbaijani vegetables, especially tomatoes and cucumbers, are well known in CIS countries and mostly appreciated for their taste and natural specifications.
And our Company RGFruit LLC propose to you ORGANÄ°C FRESH vegetables and fruit s that were listed below :
-onion
-potato
-cucumber
-tomato
-cauliflower
-eggplant
-garlic
-cabbage
-peas
-apple
-grape
-cherry
-carrot
-lemon
-nut
-almond
-walnut

high quality

Private Label Products
pomegranate juice (cloudy) specifications



Refraction (Bx0) 15 0.5

pH 3.05 0.1

Colour Specific pomegranate

Energetic Value (Kcal) 60

Energetic Value (Kj) 251

Turbidity (NTU) 625 1

Capacity:
16oz, 24oz,26oz and 32oz Doner Boxes and Noodle Boxes and Single wall, Double wall 6.5oz, 8oz, 12oz, 14oz,16oz, 22oz Paper Cups and the other boxes for food is available
2) Paper type: Kraft paper or food grade paper
3) Coated paperboard is leak-and grease-resistant, keeps food fresh Just fill with food, fold over the flaps to lock the food in
4) Disposable food container is wildly used in supermarket and stores
5) Double or single PE

Glass arbors, just like arbors made of more conventional materials, are a fine choice for their key function, which is providing comfort in a garden or a park. Among advantages of a glass arbor:

the glass structure can be opening type, so your can rest in an open arbor and enjoy fresh air and flower scent while the weather is good, but hide behind the glass if it aggravates;
you can enjoy watching the environment through the translucent façade without perceiving the thin boundary in between;
the arbor glazing is a great protection from the weather and wind without impairing the feeling of ‘being in the wilds’;
the laced and transparent structure of an even big arbor will not create a visual impression of obstructed space in your garden.
What are the design features of glass arbors? The most widespread type of arbor glazing in modern construction is either shutterproof glass of different thickness or safety glass. This material has a number of undisputable advantages:

high strength which enables to withstand big wind loads and humming blows;
safety in operation which guarantees no cuts in case the glass is broken after all;
long life.

Proofnasteel (proof list) is one of the universal materials of zinc galvanized steel that uses in building for construction of walls and interfloor partition (pouring-in flooring). Proofnasteel also uses like a covering material or in the capacity of roof floor. What does mean this material? Profnasteel is the profiled lists, fabricated from zinc galvanized steel (from0, 4 to 0, 1), which may be with polymer coating or without it. Proofnasteel has species diversity which differs with their thickness and size. All of these make possible to choose roof covering more suitable just You. Proofnasteel uses for construction of walls, fences and in fencing (fences of proofnasteel), but often in the roof materials ( roof Proofnasteel).

Proofnasteel proof even in adverse weather conditions distinguishes from durability, simplicity of assemblage and has light weight. In the production of zinc coated proofnasteel uses zinc-galvanized steel of famous Russian and world producers. It gives guaranty that Your proofnasteel will be in high quality. Shaped sheet often uses in individual and low building, for example, in the construction of cottages, small magazines, refueling stations and booth. The main advantage of proofnasteel is its durability. Besides, this building material has many positive characteristics: proofnasteel is simple in installation, convenient for transportation, also distinguishes with its external high aesthetic view.

Toolroom having efficient precise equipment can fast and in workman-like manner to produce production tools:
details pressurization from plastic and rubber, including additional remote fueling connecting, moulds for 2 colored founding. demention of pressing details 1000x1200mm, mould weight to 3000 kg, stableness 60-100 thousand snatching.
For improvement details setting, appearance qualitative of shape mould elements executed from stainless steel with grade 40×13 thorough work surface polishing.
Forms for founding under pressure of from aluminum alloy and zinc alloy.
Maximal measurement casts 1000×1200 mm, forms weight to 3000 kg, stableness 50-80 thousand snatching.
Different die tooling including die tooling for fine blanking details on moulds threefold actions, providing shear purity not lower RA 1,25 and dimensional accuracy up to 7 finish, which excludes ancillary details mechanical revision (grinding).
Labor componentry are practically gapless (gap between labor parts is 0,005mm), executed from steel X 12M, maximal sizes of operating groove500x600mm, stamp stab-leness up to 300 thousand snatching.
For stamp stableness decreasing it is possible variant labor componentry with hardmetal alloys usage.
Instrumental equipped by highly productive equipment and unique machine CHPU Fanuc.
For increase of durability of casting forms lowtemperature galvanization is applied.
Plant has unique site of fine blanking on presses of triple action with force of slash form 50 up to 240 tn per sec.
Enterprise has facility to get orders for manufacture of blanking, pressforms and forms for casting under agreed prices.
Term of manufacture is from 1 up to 6 months depending on complexity of arming.
The workshop realizes complete cycle of pressforms casting.
Projection of arming is realized by appliance of engineering modeling programs. Development of technologic programs of mechanical processing
Manufacture of details on boring, turning machine Milling, thermal treatment, profile, round, optic, coordinate polishing, erosion weaving, wire cuts Benchwork, polishing and mounting Besides pressforms the workshop manufactures stamps, appliances, spare parts to equipment and other items. Subsidiary services operate, also repair, service of the equipment, tool grinding. Personnel of technical department and of the workshop possesses great experience in projection and manufacture of pressforms. Documentation in technical department on arming passes agreement, and technical development.
Technological programs of machine processing are established, tool of second tranquility is projected.

A winter garden represents a special architectural element with glass walls and roof and is decorated with various decorative plants
Year over year there are more country mansions and cottages with special attention to winter gardens. They can give certain flair to the indoor scene and become a lively garden-like place for cozy pastiming and enjoying the beauty of the nature. Winter gardens of different price can be erected as an individual building or a part of a house, housing different plants of different sizes.
It is quite problematic and not worth to build a garden on one’s own, so you can easily use our company’s services and order one.

Main reasons why Karvan-Glass:

1. high material quality guarantee;
2. excellent design;
3. short order delivery time.

It often happens that people confuse glass panes and vinyl windows. These are not synonyms, however. A glass pane is a part and nearly crucial part of a window structure. This is a translucent structure consisting of two or more glasses that are fixed (glued) together along the outline using spacing bars and sealant compounds.
Main functions of a glass pane: natural lighting, thermal and noise insulation.

Glass panes are categorized by manufacturing process:

standard, where molecular sieve is poured into a metal or vinyl spacer, after which the glued glass sheets are plastered along the edge with silicon, isomelt, polysulfide or polyurethane sealant compound, thus providing the secondary sealing.
Warm edge technology-based manufacture This is a new and promising technology. It differs from the standard technology in that instead of several production steps as in the case with glass pane it involves only two (flexible spacer application, pressing), thus greatly saving time and cost. Such glass pane is warmer than that manufactured using a standard technology.
As defined in GOST 24866, glass pane are categorized as follows:

by number of chambers. A space between each two glass sheets is called a chamber. Glass panes can be single-chamber (two glass sheets), double-chamber (three glass sheets) and so on.
by width The glass pane width is the full width considering its glass and air part. Glass panes can be 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 42, 44 etc. mm
By glass type:
regular
energy-efficient glass with low-emission coating (hard or soft, also known as - or I-type)
noise-resistant triplex
sun-screening tinted or film-coated glass
shutterproof glass with a high protection class.

It has been decades that architectural glass sheets have been utilized as a construction material. Over this time, manufacturers have achieved a significant success in terms of fabrication and finishing technology, bringing the glass properties almost to perfection. Increasingly pronounced in glass industry is the nanotechnology sector, which renders it specific and extraordinary properties in terms of operation and aesthetics, thus opening new bright perspectives for architects and designers.

It would be fair to say that it was new safe multilayer glass items that helped discover most significant improvements of properties and capabilities of glass as a construction material. All valuable operation and technical properties of such glass are achieved by using a “sandwich” principle, i.e. by creating a multilayer composite structure with a polymer layer in between. It is still difficult to appreciate the whole significance and implications of this development.

Regrettably, many issues of perfecting the technology and equipment that helps create multilayer glass (triplex production equipment) have been outside researchers’ focus of attention, thus hindering the practical development across the entire range of safety glass application. Most new properties are still unknown and require serious theoretical and experimental developments to uncover. Among these: detailed study of formation and development of multilayer glass production technology based on innovative polymer materials with a higher strength compared to existing materials, research of properties and application of hybrid structures based on new composite elements.

The combination of fragile glass and plastic materials (for instance: polycarbonate and glass sandwich panels, glass and acryl tile etc.) enables to optimize the functionality of multi-layer shutterproof glass. It is beyond doubt that ongoing researches in this area will boost the improvement of existing and development of new approaches to designing and creating multilayer glass machines for industrial-scale production.

Due to its special thermal treatment, tempered glass boasts higher impact strength and freeze-thaw resistance compared to regular glass. All tempered glasses are subject to mandatory edge pre-treatment. If broken, such glass falls apart to small fragments with uncut edges.

The glass tempering has the following effects::

impact strength rises 5-10 fold
flexing strength rises 2-3 fold
operating temperature range increases to -150 to +300°C
The tempered glass has quite a broad range of applications: glass panes, multilayer glasses with different properties, all-glass partitions, staircases, stairs, hand rails, car windows etc. The tempered glass can withstand hard blows perpendicular to its plane. Despite its improved properties, however, tempered glass is still a fragile material. It is especially susceptible to end loads, so such glass should be installed with extreme care.

Translucent structures represent a convenient, functional and stylish decoration of various types of buildings and facilities. They look pretty well with business centers, shopping malls, and administrative buildings. They boast a light and elegant appearance but still maintain a serious yet fine exterior. The translucent structures enable to save on artificial lighting as they let in more sunlight. These structures are built using highest quality glass panes, which renders them, even greater advantages, namely noise and heat insulation as well as power saving ability.

Translucent structures are about filling both horizontal and vertical planes of a building or facility with glass panes above an aluminum façade.

Glass facades from our company represent minimum costs with always-high quality and versatility of designer solutions, which is a decisive factor for most satisfied customers who have already chosen Karvan-Glass.

It is not a secret that the appearance of a house is a sort of a business card for its owner. Embarking on a quest for an architectural solution for the façade of our house or office, we intend to benefit from the uniformity of style, beauty, practicability, and safety A sun breaker or shed is one of key elements of a building decoration which protects the porch or balcony as well as people who like spending time there from the snow, rain and other elements. Insignificant at first glance, but quite important in reality – the element like shed should be not only exquisite and stylish but also strong and safe.

And the glass sun breaker from Karvan-Glass is something that satisfies all these requirements. For glass today is a state-of-the-art, stylish and strong material widely used in construction and design. If you want to decorate the building exterior in an unusual style then glass sun breakers are your choice – buy them from our company and satisfy your boldest architectural needs, benefiting from all advantages the state-of-the-art construction technology can provide.

All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units:
Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
A stamp device for application of “steps”;
an oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
A stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.

All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units:

Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
A stamp device for application of “steps”;
an oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
A stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.

All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units:

Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
an oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
a stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.