Please click here to check who's online and chat with them.

Find Verified Driver Uniforms Suppliers, Manufacturers and Wholesalers

Jun-11-24
Graphite hot block, uniformly heated

Graphite Hot Block, Uniformly Heated

$1.28K
MOQ: Not Specified
  Nanjing Bin Zhenghong Instrument Co., Ltd
Supplier From nanjing, Mexico
Supplier Of Graphite   |   Milk
 Inquire Now  
1. Product Introduction
The graphite digestion system is an instrument used for sample pretreatment in chemical analysis. It is mainly used to dissolve organic and inorganic substances in solid samples into solutions for subsequent analysis and measurement. It heats the sample in a surrounding heating method, effectively increasing the utilization rate of thermal energy. At the same time, it occupies the front end of conventional digestion equipment with its advantages of higher temperature control accuracy, small differences between holes, fast digestion, energy saving and environmental protection. It can adapt to various types of samples, including soil, water, plants, food, etc. Graphite digesters are widely used in environmental monitoring, food safety, geological exploration and other fields. It can process samples quickly and efficiently and provide accurate and reliable analysis results.

2. Graphite digester parameters
Model: BZH-R-XJ
Temperature control range: room temperature-220â??
Temperature control accuracy: �±0.1â??
Heating material: graphite + Teflon anti-corrosion coating
Number of sample holes: 16, 24, 36, 48, 54, 63, 100 (can be customized according to customer requirements)
Control and display mode: PID temperature control digital display
Power supply: 220v/50Hz
Supporting products: PTFE digestion tube, PFA digestion tube

IV. Advantages of our graphite digester
Advantage 1: High temperature resistance, acid and alkali resistance and organic solvent corrosion resistance, good stability;
Advantage 2: Fast sample digestion speed, batch processing of samples;
Advantage 3: Fully enclosed design, while preventing heat loss to a large extent, can also effectively avoid acid mist invasion and damage to equipment components;
Advantage 4: Clean and corrosion-resistant: Using a special spraying process, the coating is uniform, firm, and will not fall off after long-term use;
Advantage 5: Using advanced integrated surround heating method, all parts of the sample are heated evenly, and the digestion is fast and complete;
Advantage 6: Easy to operate, environmentally friendly and energy-saving, saving economic costs;
Advantage 7: PID temperature control system, excellent performance, high temperature control accuracy, up to �±1â??.
Advantage 8: The heating rate can be adjusted to achieve program heating and control the heating holding time, and the heating rate is stable;
We advocate stable, healthy and fast experiments!
Application areas
Environmental monitoring: sewage, drinking water, sludge, mineral mud, sewage, soil, etc.
Food and agricultural product inspection: milk powder, fish, vegetables, tobacco, plants, fertilizers, non-staple food, etc.
Consumer product quality control: cosmetics, industrial products, etc.
Scientific research: experimental analysis, project development, etc.
Disease prevention and control: biological samples, human hair, etc.
Apr-21-23
Multi-layer Metal Sintered Mesh Filter Element

Multi-Layer Metal Sintered Mesh Filter Element

$10
MOQ: Not Specified
  Baoji Yinggao Metal Materials Co., Ltd.
Supplier From Baoji, Active, China
Supplier Of Metallic Elements   |   Industrial Filters
 Inquire Now  
The multi-layer metal sintered mesh filter element is made of metal meshes with different wire diameters and meshes sorted in a certain order and sintered at high temperature. It has higher strength than stainless steel fiber felt, better permeability than metal powder products, uniform pore size distribution, good permeability, high strength, strong corrosion resistance, high temperature resistance, weldable, renewable, long life, easy to clean and not easy to break.
Product parameters
Material: stainless steel 304 or 316L;
Size: 1000mmx500mm, 1200mmx600mm, 1000mmx1000mm (customizable);
Filtration accuracy: 2um-300um;
Classification: single-layer, double-layer, three-layer, five-layer, seven-layer and multi-layer metal Note: Special specifications can be customized according to the requirements of the buyer.
Features
1.High strength and durability: This feature is achieved through high temperature sintering, which is a process of sintering material through heat and pressure without melting it. The high temperature sintering process enables the material to have a high level of strength and durability, making it resistant to wear and tear.
2.Anti-corrosion and heat resistance: This material can withstand high temperatures up to 600 C and is resistant to corrosion, which makes it ideal for use in harsh environments.
3.Steady filter rating: This material has a steady filter rating that ranges from 2 micron to 300 microns. This means that it can effectively filter out particles of different sizes, making it suitable for a wide range of applications.
4.Filter mesh not easy to deform: The filter mesh is protected by two layers, which makes it difficult to deform. This feature ensures that the filter mesh maintains its shape and continues to function effectively even under high pressure or high viscosity environments.
5.Versatile in manufacturing processes: This material can be cut, bent, punched, stretched, and welded, making it versatile in manufacturing processes. It can be easily customized to fit different shapes and sizes, making it suitable for a wide range of applications.
Application aspects and industries
Metal meshes of various wire sizes are sorted in a specific sequence, sintered at high temperatures, and used to create the multi-layer metal sintered mesh filter element. It is stronger than stainless steel fiber felt, more permeable than metal powder goods, evenly distributed pore size, strong corrosion resistance, high temperature resistance, weldable, renewable, long-lasting, simple to maintain, and difficult to break.
Multi-layer metal sintered mesh filter elements have many applications in the filtration of high-temperature and high-pressure media (liquid-solid separation, gas-solid separation), including oil sand separation in oil fields, high temperature gas dust removal, beverage filtration, oil filtration, and water treatment.
Oct-01-22
Reference Material For OTR Tester Calibration

Reference Material For Otr Tester Calibration

$200 - $250
MOQ: Not Specified
  Guangzhou GBPI Packaging Equipment Co., Ltd.
Supplier From Guangzhou, China, China
Supplier Of Tools & Instruments
 Inquire Now  
The Measuring Development Plan (2013- 2020) issued by State Council points out that Food safety, clinical laboratory, biological, environmental protection, material science become the focus of research and development of reference materials.

Now, the reference materials of gas permeability, water vapor permeability and oxygen permeability produced by GBPI win the affirmation of Grade Secondary Reference Materials. GBPI becomes the first development organization of the reference materials of film permeability. These reference materials are mainly applied to the calibration and inspection of the gas permeability, water vapor permeability and oxygen permeability of packaging of food and drug. Reference Materials plays a very important role in packaging testing.

Definition

A substance or material that has been determined to have a sufficiently uniform property value, as a "measuring device" in the analytical measurement industry.


Function

v Calibrate, adjust and identify instrument and devices.

v Product quality control during the production

v Examine operation level the analyst

v Test characteristic value of substance or material



Types of Reference Materials

Reference Materials of Gas Permeability:

125 m Polyester Film Certified Reference Material of Gas Permeability

[Certificate Number: GBW(E)130541]

300 m Polyester Film Certified Reference Material of Gas Permeability

[Certificate Number: GBW(E)130542]

Reference Materials of Water Vapor Permeability:

125 m Polyester Film Certified Reference Material of Water Vapor Permeability

[Certificate Number: GBW(E)130543]

300 m Polyester Film Certified Reference Material of Water Vapor Permeability

[Certificate Number: GBW(E)130544]

Reference Materials of Oxygen Permeability:

25 m Polyester Film Certified Reference Material of Oxygen Permeability

[Certificate Number: GBW(E)130497]

125 m Polyester Film Certified Reference Material of Oxygen Permeability

[Certificate Number: GBW(E)130498]



Reference Value of Reference Materials

Type of polyester film (PET) reference materials

Transmission Rate Reference Value

Specification

OTR PET reference materials

(62.8 ±2.9)cm3/(m2 ·24h)

25 m

OTR PET reference materials

(12.3 ±0.9)cm3/ (m2 ·24h)

125 m

GTR PET reference materials

(11.2 ±2.1)cm3/(m2 ·24h · 0.1MPa)

125 m

GTR PET reference materials

(4.7 ±1.2)cm3/(m2 ·24h ·0.1MPa)

300 m

WVTR PET reference materials

(4.4 ± 0.8)g/ (m2 ·24h)

125 m

WVTR PET reference materials

(1.8 ± 0.3)g/ (m2 ·24h)

300 m
Oct-17-19
Molybdenum Electrode Rod

Molybdenum Electrode Rod

$1 - $100
MOQ: Not Specified
  Luoyang Kekai Tungsten & Molybdenum Technology Co., Ltd.
Supplier From Luoyang, Henan, China
Supplier Of Electrodes
 Inquire Now  
Specifications
1. Product name: Molybdenum electrodes
2.Material: Mo
3. high purity: 99.95%
4. Density: 10.2g/cc
5. Application: sapphire furnace, glass melting
polished/ground moly electrode:
Molybdenum electrode is electrodes made of material molybdenum, by applying its unique advantagestemperature resistance, continuous surface, stable edges good electrical conductivity, excellent corrosion-resistance -- to improve its entire quality and using age. Molybdenum electrode is silver gray metallic luster. It is isostatic pressed to forge to various types after sintering with medium frequency furnace and then turning, rolling, planning and milling. Meanwhile, the quality is unchanged, which can be seen from external and internal aspects, such as no lose side, no lose corner, and no crackle and divide layer. Thus, the surface of the molybdenum electrode is smooth and compact.
Molybdenum electrode can be used for glass industry,andwork in the glass solution with the temperature of 1300�C. Molybdenum electrode is used as electro-heat equipment of the glass fiber kiln. It is an important part in rare earth industry. Its density is more than or equal to 10g/m3, and its purity can reach 99.5%.
Molybdenum electrode:
Dia.(mm) Tolerance Length(mm) Tolerance
16-20 +1.0 300-1500 +2
20-30 +1.5 250-1500 +2
30-45 +1.5 200-1500 +2
45-60 +2.0 250-1300 +3
60-100 +3.0 250-800 +3

It`s mainly used for metallurgy and machinery industry. Other sizes and special requests are available
Mo has a unique property of which it's melting point can reach 2610 tungsten crucible is widely applied in high temperature vacuum furnace melting environment such as sapphire growing furnace, quartz glass melting furnace, and rare earth melting furnace. The working temperature of Mo sheet is above 1500.

The melting process of the raw material for wool and fiber production is always by electrical heating with electrode, especially designed plate and Rod electrodes are generally used.
We can provide stable quality Mo material with plate and Rod electrodes based on uniform density, purity and fine metal grain strength property.
For glass melting application, high-purity, high-density, with other features of exact measurement and smooth surface has decisive influence on the success of quality control of glass melting and service life during meltng process.
Composition:
Grade The impurity content is not more than %
Fe Ni Al Si Mg C N O
Mo-1 0.01 0.005 0.002 0.01 0.005 0.01 0.003 0.008
Mo-2 0.01 0.005 0.005 0.01 0.005 0.01 0.003 0.02
Jun-13-22
Ultrasonic Cake Continuous Cutter

Ultrasonic Cake Continuous Cutter

$25.50K
MOQ: Not Specified
  Zhangzhou Wanli Machinery Co., Ltd.
Supplier From Fujian, China
Supplier Of Food Processing Machinery
 Inquire Now  
This is an ultrasonic cutting machine for food controlled by 5-axis servo motor system, can be linked to chain slat type tunnel oven, automatic belt convey and cutting products of 600x600mm, and it equipped with automatic paper removal function, and security system of security door, frequency ultrasonic scan and fault indicator lamp.

Application
1. Bread cutting
2. Cut the cake
3. Cheese cutting
4. Dough cut
5. Cookie cutter
6. Gummy nougat cutting
7. Pizza cheese and butter
8. Cut frozen meat and aquatic products
9. Plant fiber, nut cutting
Other products feel free to contact us>>

Technical Features
A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods.
B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc.
C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform.
D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm
E.Machine could be customized according to the customersâ?? requirement.
F.With automatic front baffle
G.Control system: independent development of multiaxis control system
H.Multiaxis displacement driving device: Servo motor-precise positioning
I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed
J.Safety protection Grating: open to stop, proximity switch sensing device
K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection
L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.

Advantage
1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section.
2. Dimensional accuracy: plus or minus 1mm.
3. Can be used as a stand-alone machine or embedded solution.
4. Fast and precise because of unique servo technology.
5. Advanced software to set product parameters using icons on the touch screen.
6. A high quality safety system prevents access of the cutting area during operation.
7. After the setting is completed, a key start, automatic cutting.
8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work.
28525 Driver Uniforms Suppliers
Short on time? Let Driver Uniforms sellers contact you.
Jun-13-22
Ultrasonic Cake Continuous Cutting Machine

Ultrasonic Cake Continuous Cutting Machine

$25.50K
MOQ: Not Specified
  Zhangzhou Wanli Machinery Co., Ltd.
Supplier From Fujian, China
Supplier Of Food Processing Machinery
 Inquire Now  
This is an ultrasonic cutting machine for food controlled by 5-axis servo motor system, can be linked to chain slat type tunnel oven, automatic belt convey and cutting products of 600x600mm, and it equipped with automatic paper removal function, and security system of security door, frequency ultrasonic scan and fault indicator lamp.

Application
1. Bread cutting
2. Cut the cake
3. Cheese cutting
4. Dough cut
5. Cookie cutter
6. Gummy nougat cutting
7. Pizza cheese and butter
8. Cut frozen meat and aquatic products
9. Plant fiber, nut cutting
Other products feel free to contact us>>

Technical Features
A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods.
B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc.
C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform.
D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm
E.Machine could be customized according to the customersâ?? requirement.
F.With automatic front baffle
G.Control system: independent development of multiaxis control system
H.Multiaxis displacement driving device: Servo motor-precise positioning
I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed
J.Safety protection Grating: open to stop, proximity switch sensing device
K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection
L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.

Advantage
1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section.
2. Dimensional accuracy: plus or minus 1mm.
3. Can be used as a stand-alone machine or embedded solution.
4. Fast and precise because of unique servo technology.
5. Advanced software to set product parameters using icons on the touch screen.
6. A high quality safety system prevents access of the cutting area during operation.
7. After the setting is completed, a key start, automatic cutting.
8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work.
Jun-13-22
Customized Ultrasonic Dessert Cutting Machine

Customized Ultrasonic Dessert Cutting Machine

$25.50K
MOQ: Not Specified
  Zhangzhou Wanli Machinery Co., Ltd.
Supplier From Fujian, China
Supplier Of Food Processing Machinery
 Inquire Now  
This is an ultrasonic cutting machine for food controlled by 5-axis servo motor system, can be linked to chain slat type tunnel oven, automatic belt convey and cutting products of 600x600mm, and it equipped with automatic paper removal function optional, and security system of security door, frequency ultrasonic scan and fault indicator lamp.

Application
1. Bread cutting
2. Cut the cake
3. Cheese cutting
4. Dough cut
5. Cookie cutter
6. Gummy nougat cutting
7. Pizza cheese and butter
8. Cut frozen meat and aquatic products
9. Plant fiber, nut cutting
Other products feel free to contact us>>

Advantage:
1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section.
2. Dimensional accuracy: plus or minus 1mm.
3. Can be used as a stand-alone machine or embedded solution.
4. Fast and precise because of unique servo technology.
5. Advanced software to set product parameters using icons on the touch screen.
6. A high quality safety system prevents access of the cutting area during operation.
7. After the setting is completed, a key start, automatic cutting.
8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work.

Technical Features
A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods.
B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc.
C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform.
D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm
E.Machine could be customized according to the customersâ?? requirement.
F.With automatic front baffle
G.Control system: independent development of multiaxis control system
H.Multiaxis displacement driving device: Servo motor-precise positioning
I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed
J.Safety protection Grating: open to stop, proximity switch sensing device
K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection
L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.
Jun-13-22
Customized Ultrasonic Dessert Cutting Machine

Customized Ultrasonic Dessert Cutting Machine

$25.50K
MOQ: Not Specified
  Zhangzhou Wanli Machinery Co., Ltd.
Supplier From Fujian, China
Supplier Of Food Processing Machinery
 Inquire Now  
This is an ultrasonic cutting machine for food controlled by 5-axis servo motor system, can be linked to chain slat type tunnel oven, automatic belt convey and cutting products of 600x600mm, and it equipped with automatic paper removal function optional, and security system of security door, frequency ultrasonic scan and fault indicator lamp.

Application
1. Bread cutting
2. Cut the cake
3. Cheese cutting
4. Dough cut
5. Cookie cutter
6. Gummy nougat cutting
7. Pizza cheese and butter
8. Cut frozen meat and aquatic products
9. Plant fiber, nut cutting
Other products feel free to contact us>>

Advantage:
1. Ultrasonic cutting reduces friction, fine incision, no chip, no deformation, smooth and beautiful section.
2. Dimensional accuracy: plus or minus 1mm.
3. Can be used as a stand-alone machine or embedded solution.
4. Fast and precise because of unique servo technology.
5. Advanced software to set product parameters using icons on the touch screen.
6. A high quality safety system prevents access of the cutting area during operation.
7. After the setting is completed, a key start, automatic cutting.
8. Automatically chase ultrasonic drive power, real-time tracking of ultrasonic cutting knife frequency, to ensure that the ultrasonic cutter work in a stable state, suitable for long hours of continuous work.

Technical Features
A.It consists of cutting machine, conveyor belt, and ultrasonic generator, the knife be controlled by the ultrasonic sound, so cutting be quick and cutting surface be tidy, better shape for final goods.
B.Stainless steel structure, easy to clean, serve motor, fast and stable. For automatically cutting cake, bread, nougat,frozen cake, Halva Bar etc.
C.It is the fastest and most convenient type, the cutting cross section will be very tidy and uniform.
D.Cutting Speed: 45 times/minute(Right and Left);1000mm/minute(front, rear, right and left); Cutting Error:�±1mm
E.Machine could be customized according to the customersâ?? requirement.
F.With automatic front baffle
G.Control system: independent development of multiaxis control system
H.Multiaxis displacement driving device: Servo motor-precise positioning
I.Automatic up and down drive:Servo motor-multi-stage variable speed, adjustable cutting speed
J.Safety protection Grating: open to stop, proximity switch sensing device
K.Intelligent Touch Screen Panel: Friendly interpersonal interface, automatic mode, jog mode optional, all kinds of cutting options, the system comes with password system protection
L.Ultrasonic Generator: Automatic tracking, real-time tracking the frequency of ultrasonic cutting blade.
Nov-02-16
Baby Feeding Bottle

Baby Feeding Bottle

$0.46
MOQ: Not Specified
  Hebei Shengxiang Package Materials Co., Ltd.
Supplier From Cangzhou, Hebei, China
Supplier Of Baby Products
 Inquire Now  
Cap: silicone nipple
Process: injection blow molding
Certification: ISO 9000
Color: white, orange or customized
Property: non-toxic, light, good appearance
Packaging: sealed in PE bags and put into one carton.
Delivery lead time: 7-15 days after receiving the payment.
MOQ: 5,000 pieces.
Terms of payment: T/T, Western Union, PayPal, L/C
Specifications
1.Air-tight food grade borosilicate glass storage jar, 
keep dry food fresh longer 
2.Colorfil lid, food grade and healthy
Production information:
Pyrex clear wholesale round hot-selling high quality dried fruits storage containers
1.Air-tight food grade borosilicate glass storage jar, keep dry food fresh longer 
2.Dishwasher and micro-wave safe glass body 
3.Colorful plastic lid, food garden, more eco and healthy
4.Ideal for storing candy, cookies, pasta, snacks, coffee and more
5.Reminding: please wash it before the first use and handle with care
Advantage:
·The mould would be provided
·We always put the quality as the first consideration
·Our factory have good reputation
·You can rest assured of our quality, because we are the specialized manufacturer of various pill bottle Manufacturers and have rich experience in production
·Printing: silkscreen printing, off-set printing, hot-stamping, paper label/plastic sticker
·Our pill bottle manufacturers in accordance with the standard of European Union environmental protection.
Our quality:
1.With virgin raw material in food grade.
2.Produced in clean workshop.
3.Good match between the cap and the bottle.
4.Neat surface with uniform color and fine gloss.
5.Good shape with smooth edge.
6.EU standard approved.
Company information:
We are leading manufacturer focus on plastic industry in high-class
grade quality with reasonable price.
We provide professional plastic products under our brand ?SX?, including plastic reagent bottle, plastic dropper bottle, plastic spray bottle, plastic pill, pharmacy bottle, plastic vaccine bottle, twin (double) neck bottle and more, if any requirements just feel free to contact us.
Explanation:
1.The process of plastic oral bottle is extrusion blow molding.
2. Non-toxic, light, good appearance
3. Various colors are available.
4. Better price of plastic oral bottle for large order
5. Logo and words can be printed on the oral-bottle as your requirement.
6. We can produce models according to your own design.
7. We have gained the certification of ISO 9000.
Apr-10-17
Xaar 126/35 Printhead For Gerber Solara UV2

Xaar 126/35 Printhead For Gerber Solara Uv2

$1.01K
MOQ: Not Specified
  Demawati
Supplier From Jakarta, Jakarta, Indonesia
 Inquire Now  
Found more at Demawati.com .



Xaar 126/35 Printhead For Gerber Solara UV2 .

Price : $1,009.00

Availability:In Stock
Brand: Xaar
Product Code: DIS0124.




Xaar XJ-126/35 printhead
Remarks: Original
Description:
The Xaar 126 offers a robust and versatile binary inkjet solution for indoor graphics and outdoor signage as well as coding of secondary packaging. Compatible with UV, solvent-based and oil-based inks, the Xaar 126 printhead is available in three drop volume variants (35 pL, 50 pL and 80 pL). This printhead supports programmable waveforms allowing for tuning of jetting performance for a wide variety of fluids?.?

All-round performance?
â?¢ ?Robust and cost effective solution
â?¢ Up to 9.0 kHz firing frequencies
â?¢ UV, solvent-based and oil-based ink capable.

Maximum print quality?
â?¢ 185 dpi (native) printhead resolution
â?¢ Maintains drop size uniformity and placement accuracy
â?¢ Available in three drop size variants (35 pL, 50 pL and 80 pL)?.

Performance??
â?¢ Internal surge control mechanism to ensure consistent drop size which results in excellent image quality;
â?¢ Programmable electronics offer advanced control logic functions to enable better tuning and control of different ink;
characteristics to streamline the printing process, resulting in optimised ink performance and print quality?.

Light weight?
Built with extremely light aluminum chassis to offer cost and speed advantages in print engine design?.

Integration and maintenance?
â?¢ Easy to set up and integrate with a solid chassis, unique mounting brackets and built-in alignment features;
â?¢ Inlet and outlet ports which simplify filling and flushing to reduce setup time and maximise operational efficiencies.

Used For :
Gerber Solara UV2, Graphtec SignJet JS501, Infiniti Fina 160A / Fina 180TX / Fina 250A / Fina 320B / Orasign W-jet160 / Orasign W-Jet 160+ / Orasign W-Jet 180+ / Orasign W-Jet 320+ / 1612S, Rodin 1802 / 1804, Yat Fung Digital Xplorer YF-1232 III / Xplorer YF-8180 III Plus / Xplorer YF-8250 III Plus / Xplorer YF-8320 III

Application:


The Xaar 126 offers a robust and quality-driven printhead available in 3 drop sizes which are optimised for highly efficient coverage of large areas and for longer viewing distances. The Xaar 126 printhead is perfect for the following applications:
â?¢ Wide-format graphics
â?¢ UV-specialist graphics
â?¢ Coding & marking
â?¢ Indoor signage
â?¢ Outdoor graphics
â?¢ Outer-case printing
Nov-02-16
Laundry Detergent Bottle

Laundry Detergent Bottle

$0.50
MOQ: Not Specified
  Hebei Shengxiang Package Materials Co., Ltd.
Supplier From Cangzhou, Hebei, China
Supplier Of Plastic Bottles & Sealings
 Inquire Now  
Cap: screw cap
Process: blow molding
Certification: ISO 9000
Color: white, orange or customized
Property: nontoxic, light, good appearance
Packing: sealed in PE bags and put into one carton
Delivery lead-time: 7-15 days after receiving the payment
Payment terms: T/T, Western Union, PayPal, L/C
Specifications:
1. Air-tight food grade borosilicate glass storage jar, keep dry food fresh longer 
2. Colorful lid, food grade and healthy
Production information:
Pyrex clear wholesale round dried fruits storage containers
1. Air-tight food grade borosilicate glass storage jar, keep dry food fresh longer 
2. Dishwasher and micro-wave safe glass body 
3. Colorful plastic lid, food garden, more eco and healthy
4. Ideal for storing candy, cookies, pasta, snacks and coffee 
5. Reminding: wash it before the first use and handle with care
Advantages:
·Mold would be provided
·We always put the quality as the first consideration
·Our factory have good reputation
·You can rest assured of our quality, because we are the specialized manufacturer of various pill bottle manufacturers and have rich experience in production
·Printing: silkscreen printing, off-set printing, hot-stamping, paper label/plastic sticker
·Our pill bottle manufacturers in accordance with the standard of European Union environmental protection
Our quality:
1. With virgin raw material in food grade
2. Produced in clean workshop
3. Good match between the cap and the bottle
4. Neat surface with uniform color and fine gloss
5. Good shape with smooth edge
6. EU standard approved
Company information:
We are leading manufacturer focus on plastic industry in high-class
grade quality 
We provide professional plastic products under our brand SX, including plastic reagent bottle, plastic dropper bottle, plastic spray bottle, plastic pill, pharmacy bottle, plastic vaccine bottle, twin (double) neck bottle and more, if any requirements just feel free to contact us
Explanation:
1. Process of plastic oral bottle is extrusion blow molding
2. Nontoxic, light, good appearance
3. Various colors are available
4. Plastic oral bottle for large order
5. Logo and words can be printed on the oral-bottle as your requirements
6. We can produce models according to your own design
7. We have gained the certification of ISO 9000

Laundry Detergent Bottle
Dec-25-24
Supplier From Anqing, China
 Inquire Now

Streetwear clothing. graphic t shirts, graphic hoodies, baseball jackets, sweatpants, shorts, polo shirts, socks, caps, socks.

Supplier Of Apparel, Clothing & Garments   |   Shirts & T-Shirts   |   Trousers & Shorts   |   Jeans & Denim Wear   |   Jackets, Vest & Coats   |   Socks   |   Hats and Caps   |   Uniforms   |   Sportswear/Polo Shirts   |   Knitted & Woven Garments   |   Hoodies   |   Joggers Pant   |   Polo Shirts And T Shirts   |   Shirts   |   Shorts   |   Sweatshirts   |   T Shirts   |   Jackets   |   Caps
Sep-29-18
Supplier From Tirupur, India
 Inquire Now

Textile products:

Garments:
Our textile product categories include cotton shirts, silk shirts, t-shirts, polo t-shirts, cotton sarees, silk sarees, kids wear, men and women inner garments, men and women formal shirts, men and women trousers, traditional Indian men & women wear, nighties, skirts, socks, scarf, stole, kurtas, pajamas, knitted and woven garments, Silk, Cotton, Polyester, Linen, Viscose, Latin fabrics etc.

Fabrics:
knitted and woven fabrics, Silk, Cotton, Polyester, Linen, Viscose, Latin fabrics etc.

Leather products
Our leather product categories include leather belts, leather jackets, leather gloves, leather shoes and like products.

Agri products:
We export variety of rice, nuts and other agri products based no clients requirement.

Supplier Of Leather Products   |   Leather Belts   |   Leather Wallets   |   Shirts & T-Shirts   |   Jeans & Denim Wear   |   Uniforms   |   Polo Shirts And T Shirts   |   Sarees   |   Shirts   |   Shoes (Personal)   |   Leather Shoes   |   Denim   |   Knitted & Woven Fabrics   |   Wedding Dresses & Accessories   |   Formal Shirts   |   Cotton Shirts   |   Trousers   |   Skirts   |   Jackets   |   Woven Fabrics
May-05-17
Electromagnetic clutch Stromag EDE 4 S

Electromagnetic Clutch Stromag Ede 4 S

$1
MOQ: Not Specified
  Multimasz SP. Z O.O.
Supplier From Bralin, Wielkopolska, Poland
Supplier Of Oils   |   Ties
 Inquire Now  
We are pleased to offer you a new electromagnetic cluch Stromag EDE 4 S; possibilities of application: machine tools, textile machines, paper industry, gearboxes, wrapping machines. We have also other types of EDE: 1 S, 2 S, 6 S, 10 S, 16 S, 25 S, 41 S, 64 S, 100 S, 161 S;
as well as following Stromag clutches:
ELN 2S, 5S, 10S,16S, 25S, 41S, 64S, 100S;
EFK 10S, 16S, 25S, 41S, 64S, 100S;
EMD 2, 5, 10, 16, 25, 40, 63, 100, 160;
ESD 2, 5, 10, 16, 25, 40, 63, 100, 160;
ERD 2, 5, 10, 16, 25, 40, 63, 100, 160, 250;
EMB 2, 5, 10, 16, 25, 40, 63, 100, 160;
EZE 2, 5, 10, 16, 25, 40, 63, 100.

In our warehouse we have also various clutches and brakes of the most appreciated brands:

ZF
EK, EB-EF, EB-ER, EBD, EK-ER, EKD, EKR, EKF, EKN

Heid
MC, FOSMS, MTKM, MSBM, MBM, MUOB, FUOBM, FOV, LKCF, FMV, FM, FMO, FMOK, FC, LCWA, LCF, LCW, LMS, FMOB, LMOBA, FZV, FZND, MZZ, MLZ, FOZ, MZOUL, HLWS, HLW, HLOK, HLDBW, HZV/PZV

Binder Magnete
86 611..H00, 86 621..H00, 76 461..A00, 76 451..A00, 76 13105C0, 76 3705C0, 76 13111C00, 77 500..A15, 76 13106H00, 76 13706H00, 76 13113A00, 76 26E..B00, 76 26G..B00, 76 26N..B00, 76 26P..B00, 76 43108H00...

Ortlinghaus
0-100, 0-300, 0-010, 0-011-05, 0-011-100, 0-011-300, 0-006, 0-008-10, 0-009, 0-012, 0-013, 0-023, 0-123, 0-021-007, 0-021-3.3, 0-002, 0-600-424, 0-600-474, 0-600-070, 0-600-072, 0-700, 0-420, 0-406, 0-400, 0-442...

Fumo
ETM-...2, ETM-...4, E2M-...4, VEP-...T, VER-...S, VBA, VEP-...B, VAB-..., VAG-..., VHP-80, ESM1-..., ESM3-..., ESM5-..., ESM15-...-A, ESM15-...-B, EZM1-..., EZM2-..., EZM3-..., EZM4-..., VET-..., HLT, VEP-...,

Ema-Dessau
3KL 1,25; 2,5; 5; 10; 20; 40; 80; 4KL 1,25; 2,5; 5; 10; 20; 40; 80; KLDX 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; KLDO 0,63; 1,25; 2,5; 5; 10; 20; 40; 80

Beside this we provide the spare parts for clutches & brakes:

brush holders for dry & oil operation, brake & clutch discs (steel or friction discs), levers, clutch drivers, coils.

Our goal is to be the worldâ??s leading seller of electromagnetic as well as hydraulic and mechanical clutches and brakes for machine tools.
Jan-23-19
ABB 3HAC021313-005

Abb 3Hac021313-005

$123
MOQ: Not Specified
  Moore Automation Limited
Supplier From Xiamen, China
Supplier Of Fig   |   Shoes
 Inquire Now  
1.All product pictures are real figure, please contact us if you need more photo.
2.all sold products quality assurance for a year, if you receive the goods within one month we can give you a replacement or return any quality problem.
3.we are China's largest industrial control products suppliers, if you need other types of products, please inquiry with us, we will give you a reply immediateyl. 
4.if you buy more than one, we will give you a discount, if you have received the price, please contact us, we will try to make you satisfied, our clients from all over the world, welcome to China.

Main products, superior supply and sufficient stockï¼?
All brands DCS, PLC spare parts:

Invensys Foxboro: I/A Series system, FBM (field input/output module) sequence control, trapezoidal logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.

Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on triple modular redundancy (TMR) structure.

Westinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.

Rockwell Allen-Bradley: Reliance Ryan, SLC 500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768, Logix 5000/1756/1789/1794/1760/1788, PLC-5/1771/1785, etc.

Schneider Modicon: Quantum 140 series processors, control cards, power modules, etc.

ABB: Industrial Robot Spare Parts DSQC Series (No. 2, No. 3, No. 4, No. S4C, No. S4C, IRC5), Bailey INFI 90, etc.

Siemens (SIEMENS):Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.

Motorola (Motorola): MVME 162, MVME 167, MVME1772, MVME177 and other series.

XYCOM:I/O, VME board and processor.

GE FANUC (GE FANUC): modules, cards, drives and other spare parts.

Yaskawa (ochuan): servo controller, servo motor, servo driver.

Bosch Rexroth (BOSCH Rexroth): Indramat, I/O module, PLC controller, drive module and so on.

Woodward (Woodward): SPC valve position controller, PEAK150 digital controller.
Spare parts for industrial robot system

Advantage Brands: ABB Robots, FANUC Robots, YASKAWA Robots, KUKA Robots, Mitsubishi Robots, OTC Robots, Panasonic Robots, MOTOMAN Robots, etc.If you need, we can solve your defect part or exchange. Welcome to inquire! We will give you the best service!
mailto:unity@mvme.cn
#SLS1B14 Fanuc Ltd. Break REL Unit A05B-2351-C214 #7727SO

#SLS1B14 New Icotek KEL16/8 Art./Part-NR.42?168 Sold Seperate 13174EL

#SLS1B14 New Bussmann Series Chcc2di 2 Pole Fuse Holder 12645EL

#SLS1C27 Alta Fork Truck Brake Shoes #3105

#SLS1C26 New Super EZ Kleen Air Filter 9804 Size 16X 20X1 #8034MO
Oct-12-18
Automatic Lead Edge Feeding Die-Cutting Machine

Automatic Lead Edge Feeding Die-Cutting Machine

$1
MOQ: Not Specified
  Shandong Rino International Trade Co., Ltd.
Supplier From Jinan, Shandong, China
Supplier Of Industrial Machinery & Plants   |   Lubricating Oil
 Inquire Now  
Automatic Lead edge feeding die-cutting and creasing machine
Die-Cutting Machine
Flatbed automatic die-cutting machine

model Max. paper size Min.paper size Max.Die-cutting size Die-cuttin
gpressure Corrugated
paper Max.die-cutting
speed Total
power weight Dimensions
UD3-1300 1320*980mm 350*450 mm 1300*960mm 350T 3-10mm 5000 sheets/h 24.5KW 16.5T 5900*2365*2346mm
UD3-1500 1510*1120mm 450*550 mm 1490*1100mm 380T 3-10mm 5000 sheets/h 24.5KW 19.5T 6200*2380*2356mm
UD3-1650 1670*1200mm 500*550 mm 1650*1180 mm 400T 3-10mm 4500 sheets/h 32KW 23T 7000*2980*2450mm
Hot sale various high quality Carton Cardboard Machine, Folder Gluer Machine, Lead Edge Feeder Printing Machine, Automatic Die-cutting Machine, Manual Die-cutting Machine, Gift Box from China leading manufacturer. Our Carton Cardboard Machine are high quality, cost effective and deliver more benefits. Welcome to choose us!

Machine Introduction:
1. Equipped with pneumatic clutch and pneumatic locking plate.
2. Lead edge feeding paper. The high-speed and high precision paper feeding device can transmit all kinds of corrugated paper whenever how the quality of paper is. Equipped with light-adjusted device and has suitable ability.
3. Automatic adjusting paper feeding, paper collecting and paper aligning.
4.Automatic gripper type equipped the tooth row, open bite adjustable, under the help of paper, cardboard can run smoothly. Automatic suction suck about using leading edge of paper, tooth row gripper-style, curved cardboard and tissue paper can also be passed no scratches.
5. Pneumatic take samples when machine working, can check the die cutting effect at any time.
6. Dusting air guns, can effectively remove the template, and dust inside the device.
7. Automatic lubricating can add lubricating oil on the chain gear according to time, extended the working life of machine
8. Using alarm bells agencies in warning tone when the device is turned to raise safety warning.
9. Equipped with a precision of detection (Taiwan Riko) fiber optic switch, the paper is in place to detect and avoid paper waste.
Paper feeding unit
1.Adopt servo motor driver multi-axis no pressure feeding system, no mechanical transmission error.
2.Without full extension type paper glue of shaft transmission , implementation is true in the sense of zero damage,can prevent the deformation of cardboard an guarantee the accuracy of the paper.
3.Vacuum Suction lead edge feed and adjust the paper size as per pressure of wind.
4.Installing suck removing dust machine to eliminate the odd on the printing plate and improve the printing quality.
5.Non side breakage technology to decrease transmission difference to min degree.
6.Without equipping oil recycling and lubrication structure , and it is friendly to environment .
Apr-27-25
MJDM-3 Automatic Basket Down Stacker

Mjdm-3 Automatic Basket Down Stacker, For industrial applications

$23.00K - $55.00K / Set (FOB)
MOQ: Not Specified
  Hangzhou Royal Packing Machinery Co. Ltd.
Supplier From HangZhou, ZheJiang, China
Supplier Of Packaging Machinery   |   Fig
 Inquire Now  
Structural features:
1) Five sections using high-strength belt conveyor, Frequency loop control, Precision Auto Points, smooth delivery, rapid separation and delivered to the Ministry of basket gantry.
2) Sun gear press paper does not do damage to the cardboard. Carbon fiber press paper is extremely resistant.
3) Block car with the order structure, automatic adjustment, you can order the size of the fragmented, staggered stacking.
4) Ministry basket out feed nylon plastic caterpillar output, does not damage the backing paper.
5) Elevator servo control gondola lift, rational counterweight structure, optimal energy efficiency, After the basket out feed, Transfers power from the platform to the next step of the crawler.

Type MJDM-3-1800
The largest collection of paper width 1850mm
Collection of paper length Standard: 500 ~ 3500mm(Can be customized)
Logistics roller Can be configured according to the order
Lateral transport mode Modules belt
Stacking height 1700mm
Maximum production line speed 200m/min
Dimensions Length width height: 20000 3200 2800mm
Total weight 12T
â?¢ System parameters
Position machine Taiwan WEINVIEW or MCGS TONTEK Color touch screen10.4
Lower machine Performance of Taiwan DELTA Series PLC
Lift Control AC servo controller
Frequency machine Taiwan delta
Low-voltage electrical CHNT, Schneider Low-voltage electrical
â?¢ Power Parameters
Conveyor roller drive RV reducer: 3kw 5
Horizontal driving basket Gear reducer: 3KW 2
Paper stop car drivers RV reducer: 0.75KW
Lifting drive Worm Reducer: 15KW
Total power About 30 KW

Electrical appliances Configuration:
No. Name Type brand QTY company remark
1 Air Switch 2 CHNT
2 Frequency machine 5 delta (Taiwan) 3.7KW
3 Frequency machine 1 delta (Taiwan) 2.2KW
4 Frequency machine 2 delta (Taiwan) 15KW
5 PLC 1 delta (Taiwan) series PLC
6 Contactor Schneider
7 Switching Power Supply NES Series 3 MW (Taiwan) DC24V
8 Fan 6 JY-FAN (China )
9 Indicator XB Series 8 Schneider (France)
10 Switch ZB Series 7 Schneider (France)
11 Emergency stop switch ZB Series 5 Schneider (France)
12 With lamp reset button ZB Series 12 Schneider (France)
13 Without lamp reset button ZB Series 9 Schneider (France)
14 Two reset operation lever knob 3 Schneider (France)
15 HMI 10.4Inch 1 WEINVIEW (Taiwan)
16 Encoder E-004A 5 NEMION (Japan)
13 Encoder E-003 1 NEMION (Japan)
14 Photoelectric switch E-035A 3 OMRON (Japan)
15 Trip switch XCE-145 6 TEND (Taiwan)
16 Photoelectric switch E-069 1 OMRON (Japan)
17 Bell 1 (China)
18 Three-color lights 1 (China)
19 Red lights 1 (China)
20 Pull the emergency switch 1 (China)
Jan-25-19
ABB 3HAC021917-001

Abb 3Hac021917-001

$123
MOQ: Not Specified
  Moore Automation Limited
Supplier From Xiamen, China
Supplier Of Fig
 Inquire Now  
1.All product pictures are real figure, please contact us if you need more photo.
2.all sold products quality assurance for a year, if you receive the goods within one month we can give you a replacement or return any quality problem.
3.we are China's largest industrial control products suppliers, if you need other types of products, please inquiry with us, we will give you a reply immediateyl. 
4.if you buy more than one, we will give you a discount, if you have received the price, please contact us, we will try to make you satisfied, our clients from all over the world, welcome to China.

Main products, superior supply and sufficient stockï¼?
All brands DCS, PLC spare parts:

Invensys Foxboro: I/A Series system, FBM (field input/output module) sequence control, trapezoidal logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.

Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on triple modular redundancy (TMR) structure.

Westinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.

Rockwell Allen-Bradley: Reliance Ryan, SLC 500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768, Logix 5000/1756/1789/1794/1760/1788, PLC-5/1771/1785, etc.

Schneider Modicon: Quantum 140 series processors, control cards, power modules, etc.

ABB: Industrial Robot Spare Parts DSQC Series (No. 2, No. 3, No. 4, No. S4C, No. S4C, IRC5), Bailey INFI 90, etc.

Siemens (SIEMENS):Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.

Motorola (Motorola): MVME 162, MVME 167, MVME1772, MVME177 and other series.

XYCOM:I/O, VME board and processor.

GE FANUC (GE FANUC): modules, cards, drives and other spare parts.

Yaskawa (ochuan): servo controller, servo motor, servo driver.

Bosch Rexroth (BOSCH Rexroth): Indramat, I/O module, PLC controller, drive module and so on.

Woodward (Woodward): SPC valve position controller, PEAK150 digital controller.
Spare parts for industrial robot system

Advantage Brands: ABB Robots, FANUC Robots, YASKAWA Robots, KUKA Robots, Mitsubishi Robots, OTC Robots, Panasonic Robots, MOTOMAN Robots, etc.If you need, we can solve your defect part or exchange. Welcome to inquire! We will give you the best service!
mailto:unity@mvme.cn

#SLS1C20 Belden 24 AWG 4 Pair Shielded Electrical Wire #11278MO

#SLS1H77 New Alkon BB045-31-20 #8080MO

#SLS1F511 Allen-Bradley Flex I/O Device Net Cat. 1794-ADN 12175LR

#SLS1B19 EGS Hevi-Duty 5 KVA Transformer #6764SO

#SLS1B19 DonGan 2 KVA Stepdown Transformer #7068LR

#SLS1B14 RED-HAT Automatic Switch Rebuild kit# 302116 #12235SY
Jan-29-19
ABB 3HAC022546-003

Abb 3Hac022546-003

$123
MOQ: Not Specified
  Moore Automation Limited
Supplier From Xiamen, China
Supplier Of Fig
 Inquire Now  
Product details:
1.All product pictures are real figure, please contact us if you need more photo.
2.all sold products quality assurance for a year, if you receive the goods within one month we can give you a replacement or return any quality problem.
3.we are China's largest industrial control products suppliers, if you need other types of products, please inquiry with us, we will give you a reply immediateyl. 
4.if you buy more than one, we will give you a discount, if you have received the price, please contact us, we will try to make you satisfied, our clients from all over the world, welcome to China.

Main products, superior supply and sufficient stockï¼?

All brands DCS, PLC spare parts:

Invensys Foxboro: I/A Series system, FBM (field input/output module) sequence control, trapezoidal logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.

Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on triple modular redundancy (TMR) structure.

Westinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.

Rockwell Allen-Bradley: Reliance Ryan, SLC 500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768, Logix 5000/1756/1789/1794/1760/1788, PLC-5/1771/1785, etc.

Schneider Modicon: Quantum 140 series processors, control cards, power modules, etc.

ABB: Industrial Robot Spare Parts DSQC Series (No. 2, No. 3, No. 4, No. S4C, No. S4C, IRC5), Bailey INFI 90, etc.

Siemens (SIEMENS):Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.

Motorola (Motorola): MVME 162, MVME 167, MVME1772, MVME177 and other series.

XYCOM:I/O, VME board and processor.

GE FANUC (GE FANUC): modules, cards, drives and other spare parts.

Yaskawa (ochuan): servo controller, servo motor, servo driver.

Bosch Rexroth (BOSCH Rexroth): Indramat, I/O module, PLC controller, drive module and so on.

Woodward (Woodward): SPC valve position controller, PEAK150 digital controller.

Spare parts for industrial robot system

Advantage Brands: ABB Robots, FANUC Robots, YASKAWA Robots, KUKA Robots, Mitsubishi Robots, OTC Robots, Panasonic Robots, MOTOMAN Robots, etc.If you need, we can solve your defect part or exchange. Welcome to inquire! We will give you the best service!


#SLS1C22 Magelis XBTF011110 Modicon Telemecanique Programmable Display 101CY

#SLS1D31 New Zimmerman Trolley S2674 MKA-4760

#SLS1B14 New Festo Proximity Switch Cat-CRESME0-4-K?-LED-24 30022ELS

#SLS1F52 New Parker Tube Fittings 5-4 CBZ-SS Lot Of 5PCS 30024ELS

#SLS1F52 New Spirax Sarco 3/4" Thermo Dynamic Steam Trap 30021ELS
Feb-19-19
ABB 3HAC022440-001

Abb 3Hac022440-001

$123
MOQ: Not Specified
  Moore Automation Limited
Supplier From Xiamen, China
Supplier Of Electric Components   |   Fig
 Inquire Now  
Product details:
1.All product pictures are real figure, please contact us if you need more photo.
2.all sold products quality assurance for a year, if you receive the goods within one month we can give you a replacement or return any quality problem.
3.we are China's largest industrial control products suppliers, if you need other types of products, please inquiry with us, we will give you a reply immediateyl.
4.if you buy more than one, we will give you a discount, if you have received the price, please contact us, we will try to make you satisfied, our clients from all over the world, welcome to China.

Main products, superior supply and sufficient stock?

All brands DCS, PLC spare parts:

Invensys Foxboro: I/A Series system, FBM (field input/output module) sequence control, trapezoidal logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.

Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on triple modular redundancy (TMR) structure.

Westinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.

Rockwell Allen-Bradley: Reliance Ryan, SLC 500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768, Logix 5000/1756/1789/1794/1760/1788, PLC-5/1771/1785, etc.

Schneider Modicon: Quantum 140 series processors, control cards, power modules, etc.

ABB: Industrial Robot Spare Parts DSQC Series (No. 2, No. 3, No. 4, No. S4C, No. S4C, IRC5), Bailey INFI 90, etc.

Siemens (SIEMENS):Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.

Motorola (Motorola): MVME 162, MVME 167, MVME1772, MVME177 and other series.

XYCOM:I/O, VME board and processor.

GE FANUC (GE FANUC): modules, cards, drives and other spare parts.

Yaskawa (ochuan): servo controller, servo motor, servo driver.

Bosch Rexroth (BOSCH Rexroth): Indramat, I/O module, PLC controller, drive module and so on.

Woodward (Woodward): SPC valve position controller, PEAK150 digital controller.

Spare parts for industrial robot system

Advantage Brands: ABB Robots, FANUC Robots, YASKAWA Robots, KUKA Robots, Mitsubishi Robots, OTC Robots, Panasonic Robots, MOTOMAN Robots, etc.If you need, we can solve your defect part or exchange. Welcome to inquire! We will give you the best service!


Sargent-Welch DirecTorr Vacuum Pump 2 HP 230 Volt 3 Phase

Kent-Moore J 38100-C Air Conditioning Refrigerant Recovery & Recycling Station

2 Tri Tronics Mark II Smarteye Model SER, 1 set fiber optic cable

Keyence BL-V35E Barcode Display Interface Panel

RK Electric Co., Inc.RCD-5A-30V ( Lot Of 2 )

Allen Bradley Size 3 702-DOD93 Motor Starter
28525 Driver Uniforms Suppliers
Short on time? Let Driver Uniforms sellers contact you.
Explore Driver Uniforms related import export discussions
No Time to Search? Post Your Buy Requirement to Suppliers Worldwide.
Download from App Store Download from Google Play
go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© Wyzen Systems Private Limited
All Rights Reserved