yn27c gasoline rock drill is a hand-operated rock drilling tool. It is available for drilling, splitting breaking, shoveling. It is widely used in mining, road construction, quarrying.
Applicable Industries:Construction works , Energy & Mining
Condition:New
Type:Rotary Drilling Rig
Power Type:Gasoline
Voltage: Customized
Dimension(L*W*H):668*248*202 mm
Weight: 27 kg
Warranty:1 Year
Core Components: Motor, Engine
Drilling Diameter:30-43 mm
Drilling Depth: 6 m
raw material: 55SiMnMo
production process : involving steel rolling, forging, normalizing, quenching and tempering, etc
Shank size: H22 108mm/H25 108mm
Taper degree: 7, 11
we offer four quality products including Grade A drill rod Qs and GTIII can be applied to solid rocks
Grade B drill rod QSAA and G30 is suitable for IV level or above and 12 rocks, Grade C and Grade D dril rod suitable for IV level or below and f 8 rocks.
Spindle 240mm, hyperbolic heavy rocker, expand chuck, multi-point brake, hydraulic drive lifting, panning left and right on the middle.
Hydraulic mill roll stand Specification
The symmetrical structure can install two rolls of paper at the same time and continually change paper, paper roller clamp, lift-lower, loosen, movement, contraposition, translation etc.
Equipment was made of HT200-wide casting.
Maximum loading of one side arm 1500-2000kg
Each stand with two set track and trolley for carry paper.
Pneumatic braking
Electrical components are controlled centralized(domestic brank)
One set main motor power of hydraulic mill roll stand is 2kw, each arm power 1.5*4kw
YIKE GROUP Hydraulic mill roll stand Advantage
Hydraulic mill roll stand characteristic
Professional manufacturer
Economic cost
Durable working
Fast delivery
Good after service
Structural features
1.Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and othersï¼?the lifting of the paper adopts hydraulic drive.
1. When drilling steel parts, ensure adequate cooling of heavy duty drill bits and use metal cutting fluid.
2. Good rigidity of drill pipe and clearance of guide rail can improve the precision of drilling and the life of drill bit.
3, Please ensure smooth and clean between Drill For Brick Wall magnetic seat and workpiece.
4, when drilling thin plate, to reinforce the workpiece, Drill large workpiece, please ensure the stability of the workpiece.
5, at the beginning and end of the drilling, the feed should be reduced by 1/3.
6. When drilling, a large number of fine powder materials, such as cast iron and copper, can not use coolant, and the use of compressed air to help chip removal.
7. Please remove the iron filings wrapped around the Drill body by the Flexible Auger Drill Bit in time to ensure smooth chip removal.
5760 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
Drill Pipe Rotary Clamp Device is installed on the wellhead,when the kelly is not on the wellhead(inside the rotary table),it may give drill pipe a forward torque or backward torque,and to finish forward tptation or backward rotation and the hole raming operation instead of the kelly.The merits of it are:it can be directly installed on the wellhead or casing on the drill tools without unleashing the drill tools.It can accommodate drill pipe from 2 3/8 inch to 5 inch,the rated torque of it is 60KN.M.
Type E Pneumatic Spiders are utilized to handle drill pipe and tubing in oil well repairing.This type spider can accommodate pipe from 2 3/8 to 7 5/8 inch,the rated load is 175 tons.
There are three types of DU series Drill Pipe Slips:DU,DUL and SDU.They are with large handing range and light weight.Thereinto,SDU slips have larger contacting areas on the taper and higher resistance strength.They are designed and manufactured according to API 7K Specification for drilling and well servicing equipment.
ZQ Drill Pipe Power Tong is an ideal wellhead tool for oil drilling,widely applied in making-up and breaking-out for well drilling and repairing on offshore and land.Open-throat design of the ZQ series with high mobility allows escaping from drilling pipe freely.The tong is a combination of spinning tong and torque tong.It substitutes cathead,suspension tong and spinning rope in making-up and breaking-out.
Type C or CHD Pneumatic Spiders are utilized to handle drill pipe and tubing in oil well repairing.This type sipder can accommodate pipe from 1.315 to 5 1/2 inch,the rated load of type C pneumatic spider is 80 tons,the rated load of type CHD pneumatic sipder is 120 tons.
Type A drill collar slips(Woolley Style) are multi-segments slips.They can accommodate the changes of outer diameter after the abrasion of drill collar.They are with light weight,large handing scale and reliable quality.This kind of slips are designed and manufactured according to API Spec 7K Specification for drill and well servicing equipment.
DB Tong is used for marking up or breaking out the screws of drill tools and casing joint or coupling.It can be adjusted by changing latch lug jaws and handling shoulders.
Roll-Forged Sheaves are available in many configurations in order to meet various oilfield applications.
Roll-Forged sheaves are available in sizes up to 78 in diameter.
Applications should provide for tightening separator plates against bearing cones to adjust and insure proper function of bearing.
Each sheave in the table below has a machined bore sized to accept the respective bearing number shown.
The sheaves are provided from the factory plain bore (the bearings are not included).
Air operated thread protector is also called Inflatable thread protector. It is used to protect the outer thread of casing and tubing pipe. Its outstanding feature is that its gas nozzle is manufactured on the facade, which can protect the gas nozzle in the pipes loading, unloading and transportation process. The gas nozzle of dismountable inflatable thread protector is on the side, which may damage the gas nozzle. Inflatable thread protector is made from polyurethane containing a stainless steel ring in it, so integral inflatable thread protector is resistant to corrosion, abrasion and oil. It has many advantages, such as fast inflation, easy operation, good air-tightness, lowering consumption and cost. Besides, it can be repeatedly used.
Features:
The Air operated Thread Protectors provide a 360�° grip with greater, evenly divided holding power. - Durability is enhanced because the outside of the protectors does not change; only the inside inflates to provide a better grip on the pin.
-Absence of moving parts, metal clamping bars, or other mechanisms provides a long and virtually maintenance-free life cycle.
-The bottom of each protector contains a rugged buffer.
-Air operated thread protectors provide firm attachment to all thread types for greater operational flexibility.
-Rugged construction makes this protectors resistant to high temperatures and rough handling for a long life cycle.
-Pressurization by air facilitates installation and release for operational efficiency.
Fill and Circulate Tool (hereafter referred to as FAC Tool) is a surface tool used during the casing running operation. The FAC Tool is designed to both fill the casing with drilling fluid while running it in the hole and to enable quick circulation of the casing string at any time without installation of a casing swage. The FAC Tool has
features with easy â??to- use , safe and reliable , no leakage and so on, which lightens labor intensity of workers greatly and improves operation environment of well.
The FAC Tool is composed of ten parts (shown in figure) , whose main function of components are below:
1. Drill Pipe Connector: The FAC Tool built for top drive rigs connects to the drill pipe threads of the rigâ??s top drive unit via the Drill Pipe Connector. The threads of the Drill Pipe Connector are standard 4 1/2 IF, but crossovers are available for other drill pipe threads.
2. Extension: For applications where long elevator links are used, Extensions are placed between the Drill Pipe Connector and the Mandrel. On the Extension are two Pad Eyes that make it easy to manipulate the Tool around the Rig during rig up or rig down. Also, while the Tool is in use, a Safety Cable attaches to one of the Pad Eyes in the event the Tool should accidentally come loose from the top drive. In place of the Extensions, a Drill Pipe Pup can be used between the top drive connection and the Drill Pipe Connector instead of extension.
3. Mandrel: The Mandrel houses the specially designed Seal Assembly that is used to seal off the casing string. The Seal Assembly has three parts: the Seal Retainer, the Sealing Element, and the Gauge Ring.
4. Seal Retainer: Aluminum part that keeps (retains) the Sealing Element from being extruded upward while circulating.
5. Sealing Element: Elastomeric Seal that seals off the casing for circulation. It is hollow so circulation pressure can energize the seal it creates against the casing bore.
6. Gauge Ring: Tapered Aluminum piece that guides the Seal Assembly into the pipe and has holes to allow energizing pressure into the Sealing Element.
7. Retainer Sub: The Seal Assembly is held in place with the flexible hose.
8. Flexible Hose: The Retainer Sub is also used to connect a high pressure Flexible Hose. This Hose prevents any hard stack out between the FAC Tool and the casing and compensates for misalignment and casing movement during make up.
9. Mud Saver Valve: Below the Flexible Hose is the heart of the FAC Tool, the Mud Saver Valve. It is essentially a two-way check valve. This Valve opens with pressure when the mud pump is turned on and closes when the mud pump is turned off. It also permits flow in the upward direction for releasing pressure.
Supply API Drawworks Pneumatic Tube Clutch and various spare parts !
Pneumatic clutch is a friction clutch with compressed air as the power source for operation. It is generally used on equipment that needs to transmit large torque and change the rotation direction quickly, such as oil drilling machinery, ships, large mechanical presses,excavators,ball mills, rubber and plastic machinery, etc.
Pneumatic clutch is a friction clutch with compressed air as the control power source.Generally used in the need to transfer large torque and rotating direction at a fast speed of the equipment, such as oil drilling machinery, ships, paper, mining, large mechanical presses, excavators, rubber and plastic machinery.
Pneumatic clutch has large transmission torque, stable engagement, easy to install, vibration absorbing, and can compensate a small amount of angular and radial relative offset of the main and driven axes. The driven part has small inertia, long service life, compact structure and good sealing.However, the deformation resistance of the pneumatic tube is large, the material cost of the pneumatic tube is high, the use temperature is limited, more than 60â?? will reduce the life of the pneumatic tube, lower than -20â?? easy to make the pneumatic tube brittle.
Pneumatic clutch joint components mainly use friction plate, friction shoe and so on.The pneumatic clutch is composed of rim,brake shoe, friction plate, torque bar, release spring and rubber air tube.The working process of the pneumatic clutch is realized by the pneumatic tyre charging and discharging. The pneumatic tyre is the key part of the pneumatic clutch.The rubber air tube is vulcanized by the outer rubber layer, the inner rubber layer, and the curtain cloth layer.
1. Small appearance, but can transmit a lot of rotating force.
2. It has strong durability and wear resistance.
3. Long product life, safe and convenient operation.
4. The clutch can be easily installed or uninstalled when transmitting power.
5760 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
