Find Verified Dried Meat Suppliers, Manufacturers and Wholesalers

Grade C NitrocelluloseCellulose nitrate CAS 9004700

Nitrocellulose is a white odorless and odorless solid Celluloid plastic is a thermoplastic material containing 20 camphor plasticizer It softens significantly at 80 can be molded and processed at 110125 and can self ignite above 165 Transparent soft with high mechanical strength and low water absorption No deformation and no white spots in boiling water for 2 minutes Stable to water and general dilute acid solutions can be corroded by dilute alkaline solution partially soluble in benzene and dichloroethylene and soluble in solvents such as ethanol and ethyl acetate

Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls triangular plates pen holders eyeglass frames toys and umbrella handles and tool handles in daily necessities Nitrocellulose can also be used as a fiber adhesive coating and substrate material

This product is nontoxic This product belongs to Class A flammable dangerous goods Packaged in wooden boxes with plastic bags lined inside Each box should not exceed 160kg or packaged according to user requirements There should be a flammable mark on the outside of the box Storage should be placed in a dry ventilated and clean warehouse away from heat sources and direct sunlight It should not be stored together with acidic self igniting and explosive materials It is strictly prohibited to approach open flames Transportation should be protected from sunlight and rain and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods

CN is fully kneaded with plasticizers such as camphor solvents alcohol dyes or pigments in a kneading machine at 36 and then filtered in a pressure filter at 60 The filtered material is rolled on a two roller rolling machine and the resulting thin sheet is crushed dried flattened or polished to obtain sheetlike CN plastic The rolled thin sheet can also be placed into an extrusion machine to form a tubular object

Nitrocellulose is a white, odorless, and odorless solid. Celluloid plastic is a thermoplastic material containing 20% camphor plasticizer. It softens significantly at 80 , can be molded and processed at 110-125, and can self ignite above 165 . Transparent, soft, with high mechanical strength and low water absorption. No deformation and no white spots in boiling water for 2 minutes. Stable to water and general dilute acid solutions, can be corroded by dilute alkaline solution, partially soluble in benzene and dichloroethylene, and soluble in solvents such as ethanol and ethyl acetate.

Method of production

Nitrocellulose is a mixture of acid that nitrates cellulose, undergoes acid removal, pre washing, boiling, washing, dehydration, and then uses alcohol to remove water, resulting in nitrocellulose containing alcohol.

purpose

Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls, triangular plates, pen holders, eyeglass frames, toys, and umbrella handles and tool handles in daily necessities. Nitrocellulose can also be used as a fiber, adhesive, coating, and substrate material.

Security

This product is non-toxic. This product belongs to Class A flammable dangerous goods. Packaged in wooden boxes with plastic bags lined inside. Each box should not exceed 160kg, or packaged according to user requirements. There should be a "flammable" mark on the outside of the box. Storage should be placed in a dry, ventilated, and clean warehouse, away from heat sources and direct sunlight. It should not be stored together with acidic, self igniting, and explosive materials. It is strictly prohibited to approach open flames. Transportation should be protected from sunlight and rain, and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods.

Forming processing

CN is fully kneaded with plasticizers (such as camphor), solvents (alcohol), dyes (or pigments) in a kneading machine at 36, and then filtered in a pressure filter at 60 . The filtered material is rolled on a two roller rolling machine, and the resulting thin sheet is crushed, dried, flattened, or polished to obtain sheet-like CN plastic. The rolled thin sheet can also be placed into an extrusion machine to form a tubular object.

CAS·:57-13-6 Urea for vehicles, agricultural urea, urea N46
When the temperature of urea is below 20 and the relative humidity is below 70%, it will not only not absorb moisture, but also evaporate water and reduce its water content; When the temperature exceeds 20 �¢?? and the relative humidity is higher than 80%, it starts to absorb moisture, and becomes paste when it is serious. When the air is dried again, it will re agglomerate, which is only inferior to ammonium nitrate. When the urea aqueous solution is at 80 �¢??, hydrolysis and decomposition reactions will occur, forming ammonium carbamate, ammonia gas and carbon dioxide respectively. Under acid and alkaline conditions, urea will decompose faster when it is heated. Urea is easy to combine with straight chain carbohydrates to form crystalline additional compounds; It forms a variety of double salts with various inorganic compounds, such as Ca (NO3) 2 �?�· 4CO (NH2) 2, NH4Cl �?�· CO (NH2) 2, CaChemicalbookSO4 �?�· 4CO (NH2) 2, MgSO4 �?�· 4CO (NH2) 2 �?�· 3H2O, Mg (NO3) �?�· 4CO (NH2) 2 �?�· 2H2O, etc; It is easy to form urea phosphate, dicalcium phosphate and water with monocalcium phosphate, namely Ca (H2PO4) 2 �?�· H2O+CO (NH2) 2 �¢?? H3PO4 �?�· CO (NH2) 2+CaHPO4+H2O; With nitric acid, it is easy to form urea nitrate, CO (NH2) 2+HNO3 �¢?? CO (NH2) 2 �?�· HNO3, which combines and relaxes the two; It can combine with formaldehyde to form urea formaldehyde compounds (uric acid rubber shrinks), in which the higher proportion of formaldehyde is urea resin, and the lower proportion is slow-release (effective) urea.

397g, 340g, 200g and as per the client's requirement.

Export cartons

1) mounted to 4-wheel tractor, driven by PTO cardan.

2) Auto twine binding system

3) Matched for 20-50HP tractor

4) Iron plate: 16-20PCS/20FT, 36-40PCS/40FT.

Fish feed making machine is used for processing for dogs and cats (pet food), birds, piglets, frogs, sinking and floating aquatic feeds for fish. Which is high and new technical program as to catch the developing pet food market. CE certificate best price floating aquarium fish feed pellet food making machine mainly use maize, fish powder, meat powder and some food additive as main raw material, through mixing, extruding, roasting, flavoring to get the final puffed pet food. This line is fully automatic, high capacity and with different of shapes. It can produce such as cat food, dog food, fish food, bird food and so on.

Potato Chips Production Line Description:

This semi-automatic Potato Chips Production Line in low price is specially designed for small and medium scale potato chips manufacturers. We offer three different models(50 kg/h, 100 kg/h, 200 kg/h) for various potato chips sellers. Semi-automatic potato chips line can be applied in grocery, retail store, supper market, restaurant, etc. Semi-automatic potato chips processing line has the similar functions as fully-automatic potato chips production line, while manual potato chips line has much lower price and is specially suitable for small scale potato chips manufacturers. Three different yield potato chips processing lines enjoy high praise in our customers. Smallest potato chips production line with 50 kg/h yield is best for super market or food retailer store. Potato chips business is the most-lasting business now and forever.

Potato Chips Production Line product process:

Potato washing and peeling --- potato chips(slices) cutting -- potato chips(slices)blanching -- potato chips(slices) dewatering -- potato chips( French fries) frying -- potato chips( French fries) de-oiling -- potato chips( French fries) flavoring -- potato chips( French fries) packing

Potato Chips Production Line technical data:
1.Model:AST-100
2.Capacity:100kg/h
3.Power:61.2kw
4.Frying time: 6 minutes
5.Frying temperature: 180degree
6.Blanching time: 7-15 minutes
7.Blanching temperature: 70degree

This French Fries Chips Line is specially designed for small and medium scale French Fries Chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This Frozen Frechn Potato Chips Line is specially designed for small and medium scale French Fries Chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This Semi Automatic Potato Sticks Plant is specially designed for small and medium scale potato Sticks manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This Plantain Processing Machine is specially designed for small and medium scale potato chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This Automatic Potato Chips Cutting Machine is specially designed for small and medium scale potato chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This potato crisps line in low price is specially designed for small and medium scale potato chips manufacturers. We offer three different models(50 kg/h, 100 kg/h, 200 kg/h) for various potato chips sellers. Semi-automatic potato chips line can be applied in grocery, retail store, supper market, restaurant, etc. Semi-automatic potato chips processing line has the similar functions as fully-automatic potato chips production line, while manual potato chips line has much lower price and is specially suitable for small scale potato chips manufacturers. Three different yield potato chips processing lines enjoy high praise in our customers. Smallest potato chips production line with 50 kg/h yield is best for super market or food retailer store. Potato chips business is the most-lasting business now and forever.

Data needed for Semi-automatic potato chips plant
Model : 50kg/h
Ratio of raw material and finishing product: 3~3.5:1
Oil Consumption : 2kg/h
Water Consumption : 0.05 CBM/H
Workers Needed : 6-8persons
Space Needed: 60 square meters(machine can be turned around)

This semi-automatic potato crisps line in low price is specially designed for small and medium scale potato chips manufacturers. We offer three different models(50 kg/h, 100 kg/h, 200 kg/h) for various potato chips sellers. Semi-automatic potato chips line can be applied in grocery, retail store, supper market, restaurant, etc. Semi-automatic potato chips processing line has the similar functions as fully-automatic potato chips production line, while manual potato chips line has much lower price and is specially suitable for small scale potato chips manufacturers. Three different yield potato chips processing lines enjoy high praise in our customers. Smallest potato chips production line with 50 kg/h yield is best for super market or food retailer store. Potato chips business is the most-lasting business now and forever.

50kg Semi-automatic Potato Chips Plant
The 50kg semi-automatic potato chips plant is suitable for starters. As a supplier of high quality potato chips machinery, we can not only offer professional market analysis reports, but also provide solutions for customers.

Data needed for Semi-automatic potato chips plant
Model : 50kg/h
Ratio of raw material and finishing product: 3~3.5:1
Oil Consumption : 2kg/h
Water Consumption : 0.05 CBM/H
Workers Needed : 6-8persons
Space Needed: 60 square meters(machine can be turned around)

This French Fries Chips Making Machine is specially designed for small and medium scale French Fries Chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

This Potato Chips Making Machine is specially designed for small and medium scale potato chips manufacturers,The detail is follow:
1. Model : 100kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Potato Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree
French Fries:
1. Frying time: 8-10 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

Food Dehydration Machine/Equipment Feature:

1.For the heating source, there are many kinds: steam, electrical, far infrared or steam and electrical to be chosen.
2.The used temperatures to be used: steam heating 50-140degree, Max.150degree.
3.The moisture while using the electrical or temperature: 50-350degree.
4.There are the automatic control system and the computer control system for users' selection.
5.Commonly used steam pressure 0.02-0.08 Mpa(0.2-8kg/cm2)
6.If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.
7.The special requirements should be indicated at the time of order.
8.The price for the non-standard oven should be consulted.
9.The use temperatures more than 140degree and less than 60degree should be indicated at the time of order.

Vegetable Food Dryer Technical Data:
1.Model:CT-C-O
2.Capacity of each batch:25kg
3.Power of Fan:0.45kw
4.Consumption of steam:5kg/h
5.Total Power:9kw/h
6.Thermal area:5m2
7.Air volume:3450m3/h
8.Temperature used:about 2degree
9.Quantity of trays(pcs):16
10.The size of tray(mm):460*640*45mm
11.Outside dimension (mm):1850x1000x2044
12.Inside dimension(mm):1050x800x1500

This Banana Chips Line is specially designed for small and medium scale Banana Chips manufacturers,The detail is follow:
1. Model : 50kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Banana Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

Commercial fruit and vegetable dryer description:

1. Ctc series vegetable food dryer is made by low noise, high temperature axial flow fan and automatic temeprature control system.

2.The whole circulation system is fully enclosed to make that the heat efficiency of the drying oven increases from 3-7%of the traditional drying oven to 35-45% of the present one. The highest heat efficiency can reach to 50%.

3.For the heating source, there are many kinds: steam, electrical, far infrared or steam and electrical to be chosen.

4.The used temperatures to be used: steam heating 50-140degree, max.150degree.

5.The moisture while using the electrical or temperature: 50-350degree.

6.There are the automatic control system and the computer control system for users' selection.

7.Commonly used steam pressure 0.02-0.08 mpa(0.2-8kg/cm2)

8.If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.

9.The special requirements should be indicated at the time of order.

11.The price for the non-standard oven should be consulted.

12.The use temperatures more than 140degree and less than 60degree should be indicated at the time of order.

Commercial fruit and vegetable dryer technical data:

1.Model:ct-c-o
2.Capacity of each batch:25kg
3.Power of fan:0.45kw
4.Consumption of steam:5kg/h
5.Total power:9kw/h
6.Thermal area:5m2
7.Air volume:3450m3/h
8.Temperature used:about 2degree
9.Quantity of trays(pcs):16
10.The size of tray(mm):460*640*45mm
11.Outside dimension (mm):1850x1000x2044
12.Inside dimension(mm):1050x800x1500

Vegetable Dryer/Fruit Drying Machines Feature:

1.For the heating source, there are many kinds: steam, electrical, far infrared or steam and electrical to be chosen.
2.The used temperatures to be used: steam heating 50-140degree, Max.150degree.
3.The moisture while using the electrical or temperature: 50-350degree.
4.There are the automatic control system and the computer control system for users' selection.
5.Commonly used steam pressure 0.02-0.08 Mpa(0.2-8kg/cm2)
6.If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.
7.The special requirements should be indicated at the time of order.
8.The price for the non-standard oven should be consulted.
9.The use temperatures more than 140degree and less than 60degree should be indicated at the time of order.

Vegetable Dryer/Fruit Drying Machines Detail:
1.Model:CT-C-O
2.Capacity of each batch:25kg
3.Power of Fan:0.45kw
4.Consumption of steam:5kg/h
5.Total Power:9kw/h
6.Thermal area:5m2
7.Air volume:3450m3/h
8.Temperature used:about 2degree
9.Quantity of trays(pcs):16
10.The size of tray(mm):460*640*45mm
11.Outside dimension (mm):1850x1000x2044
12.Inside dimension(mm):1050x800x1500

Feature Of Vegetable Food Dryer:

1.For the heating source, there are many kinds: steam, electrical, far infrared or steam and electrical to be chosen.
2.The used temperatures to be used: steam heating 50-140degree, Max.150degree.
3.The moisture while using the electrical or temperature: 50-350degree.
4.There are the automatic control system and the computer control system for users' selection.
5.Commonly used steam pressure 0.02-0.08 Mpa(0.2-8kg/cm2)
6.If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.
7.The special requirements should be indicated at the time of order.
8.The price for the non-standard oven should be consulted.
9.The use temperatures more than 140degree and less than 60degree should be indicated at the time of order.

Main Data Of Vegetable Food Dryer:
1.Model:CT-C-O
2.Capacity of each batch:25kg
3.Power of Fan:0.45kw
4.Consumption of steam:5kg/h
5.Total Power:9kw/h
6.Thermal area:5m2
7.Air volume:3450m3/h
8.Temperature used:about 2degree
9.Quantity of trays(pcs):16
10.The size of tray(mm):460*640*45mm
11.Outside dimension (mm):1850x1000x2044
12.Inside dimension(mm):1050x800x1500

Vegetable Drying Machine|Food Dryer Feature:

1. For the heating source, there are many kinds: steam, electrical, far infrared or steam and electrical to be chosen.

2.The used temperatures to be used: steam heating 50-140degree, Max.150degree.

3.The moisture while using the electrical or temperature: 50-350degree.

4.There are the automatic control system and the computer control system for users' selection.

5.If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.

6.The special requirements should be indicated at the time of order.

7.The price for the non-standard oven should be consulted.

8.The use temperatures more than 140degree and less than 60degree should be indicated at the time of order.

Vegetable Drying Machine|Food Dryer Main Data:

1.Model;CT-C-1
2.Capacity of each batch:60KG
3.Power of Fan:0.45KW
4.Consumption of steam:10kg/h
5.Total Power:9kw/h
6.Thermal area:10m2
7.Air volume:3450m3/h
8.Temperature used:about 2 degree
9.Quantity of trays(pcs):24
10.The size of tray(mm);460x640x45 mm
11.Outside dimension (mm):
1700x1200x2000
12.1700x1200x2000:900x1000x1500

Fish Dehydrating Machine Feature:

1. For the heating source, there are many kinds: steam, electrical, far infrared or steam and electrical to be chosen.

2.The used temperatures to be used: steam heating 50-140degree, Max.150degree.

3.The moisture while using the electrical or temperature: 50-350degree.

4.There are the automatic control system and the computer control system for users' selection.

5.If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.

6.The special requirements should be indicated at the time of order.

7.The price for the non-standard oven should be consulted.

8.The use temperatures more than 140degree and less than 60degree should be indicated at the time of order.

Fish Dehydrating Machine Main Data:

1.Model;CT-C-1
2.Capacity of each batch:60KG
3.Power of Fan:0.45KW
4.Consumption of steam:10kg/h
5.Total Power:9kw/h
6.Thermal area:10m2
7.Air volume:3450m3/h
8.Temperature used:about 2 degree
9.Quantity of trays(pcs):24
10.The size of tray(mm);460x640x45 mm
11.Outside dimension (mm):
1700x1200x2000
12.1700x1200x2000:900x1000x1500

Food Dryers/Vegetable Dryer/Dehydrator Feature:

1. For the heating source, there are many kinds: steam, electrical, far infrared or steam and electrical to be chosen.

2.The used temperatures to be used: steam heating 50-140degree, Max.150degree.

3.The moisture while using the electrical or temperature: 50-350degree.

4.There are the automatic control system and the computer control system for users' selection.

5.If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.

6.The special requirements should be indicated at the time of order.

7.The price for the non-standard oven should be consulted.

8.The use temperatures more than 140degree and less than 60degree should be indicated at the time of order.

Food Dryers/Vegetable Dryer/Dehydrator Main Data:

1.Model;CT-C-1
2.Capacity of each batch:60KG
3.Power of Fan:0.45KW
4.Consumption of steam:10kg/h
5.Total Power:9kw/h
6.Thermal area:10m2
7.Air volume:3450m3/h
8.Temperature used:about 2degree
9.Quantity of trays(pcs):24
10.The size of tray(mm);460x640x45 mm
11.Outside dimension (mm):
1700x1200x2000
12.1700x1200x2000:900x1000x1500

This Banana Chips Plant is specially designed for small and medium scale Banana Chips manufacturers,The detail is follow:
1. Model : 50kg/h
2. Ratio of raw material and finishing product: 3~3.5:1
3. Oil Consumption : 2kg/h
4. Water Consumption : 0.05 CBM/H
5. Workers Needed : 6-8persons
6. Space Needed: 60 square meters(machine can be turned around)

Banana Chips:
1. Frying time: 6 minutes
2. Frying temperature: 180degree
3. Blanching time: 7-15 minutes
4. Blanching temperature: 70degree

Screw Fish Pellet Extruder Description:

1. This Fish Pellet Extruder is widely used for producing floating feed pellets of all kinds of aquatic animal.
2. Advanced technology and humanized design ensures easy operation and reliable performance.
3. High efficiency, low power consumption
4. Screw sleeve of this small fish food extruder adopts enchase alloy steel strip structure, which guarantees long service life.
5. Different moulds can be chosen to make pellets with different diameters and shapes.
6. Feed pellets dia. Is 0.9-15mm.

Screw Fish Pellet Extruder Feature:

1. This extruder equipment adopts the auto-controlling speed feeding tool to produce the feed material evenly.
2. Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
3. High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
4. The cutting knife adopts the frequency controlling speed in order to change the material size.
5. The floating time can be controlled by the puffing degree adjustment.
6. Auto-temperature control system makes the temperature controlling more direct viewing and the parameter more precise.

Screw Fish Pellet Extruder Technical Data:

1.Name: Fish Food Machine
2.Model: AST-DGP50
3.Capacity: 0.06-0.08t/h
4.Main Power: 11kw
5.Feeding Power: 0.4kw
6.Cutting Power: 0.4kw
7.Screw Diameter: 50mm

Fish Pellet Extruder/Fish Food Machine Description:

1. This fish food extruder is widely used for producing floating feed pellets of all kinds of aquatic animal.
2. Advanced technology and humanized design ensures easy operation and reliable performance.
3. High efficiency, low power consumption
4. Screw sleeve of this small fish food extruder adopts enchase alloy steel strip structure, which guarantees long service life.
5. Different moulds can be chosen to make pellets with different diameters and shapes.
6. Feed pellets dia. Is 0.9-15mm.

Fish Pellet Extruder/Fish Food Machine Feature:

1. This extruder equipment adopts the auto-controlling speed feeding tool to produce the feed material evenly.
2. Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
3. High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
4. The cutting knife adopts the frequency controlling speed in order to change the material size.
5. The floating time can be controlled by the puffing degree adjustment.
6. Auto-temperature control system makes the temperature controlling more direct viewing and the parameter more precise.

Fish Pellet Extruder/Fish Food Machine Technical Data:

1.Name: Fish Food Machine
2.Model: AST-DGP50
3.Capacity: 0.06-0.08t/h
4.Main Power: 11kw
5.Feeding Power: 0.4kw
6.Cutting Power: 0.4kw
7.Screw Diameter: 50mm

Wood Pellet Machine/Sawdust Pellet Machine Feature:

1. This Wood Pellet Machine mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce diameter is 6mm,8mm,10mm,12mm pellets.
2.The pellet machine adopt imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand
3.Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .
4.the machine also matched the safty equipment , once overload , the safty pin will crack, to protecting the machine lifetime .

Wood Pellet Machine/Sawdust Pellet Machine Technical Data:

1.Name:Wood Pellet Machine/Sawdust Pellet Machine
2.Model:MZLH420
3.Main Power:90kw
4.Capacity:1-1.2t/h
5.Feeder Power:1.5kw
6.Force Feeder Power:1.5kw
7.Die Diameter:420mm

Wood Pelleting Mill Feature:

(1). This Wood Pelleting Mill mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce diameter is 6mm,8mm,10mm,12mm pellets.
(2)The machine adopt imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand
(3)Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .
(4)the machine also matched the safty equipment , once overload , the safty pin will crack, to protecting the machine lifetime

Wood Pelleting Mill Main data:

1.Name:Wood Pelleting Mill
2.Model:MZLH420
3.Capacity:1-1.2t/h
4.Main Power:90kw
5.Feeder Power:1.5kw
6.Force Feeder Power:1.5kw
7.Die Diameter:420mm

Wood Pellet Production Line Feature:

(1). This Wood Pellet Production Line mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce diameter is 6mm,8mm,10mm,12mm pellets.
(2)The machine adopt imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand
(3)Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .
(4)the machine also matched the safty equipment , once overload , the safty pin will crack, to protecting the machine lifetime

Wood Pellet Production Line Main data:

1.Name:Wood Pellet Production Line
2.Model:MZLH420
3.Capacity:1-1.2t/h
4.Main Power:90kw
5.Feeder Power:1.5kw
6.Force Feeder Power:1.5kw
7.Die Diameter:420mm

Wood Pellet Making Machine Feature:

(1). This Wood Pellet Making Machine mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce diameter is 6mm,8mm,10mm,12mm pellets.
(2)The machine adopt imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand
(3)Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .
(4)the machine also matched the safty equipment , once overload , the safty pin will crack, to protecting the machine lifetime

Wood Pellet Making Machine Quotation Details :

(1)Payment: 40% payment should be prepaid by telegraph transfer, the balanced 60% should be paid within 5(five) days after got the copy of B/L
(2)Delivery Time: 25- 30 days after receive the advance payment
(3)Price based on FOB Shanghai port,China Per Set
(4)Packing: Standard export packing by Fumigation-free wooden cases
(5)MOQ:1set
(6)Validity of Quotation: 2 months
(7) Warranty Period: 18 months except the spare parts

Wood Pellet Machine Main data:

1.Name:Wood Pellet Machine
2.Model:MZLH420
3.Capacity:1-1.2t/h
4.Main Power:90kw
5.Feeder Power:1.5kw
6.Force Feeder Power:1.5kw
7.Die Diameter:420mm

Sawdust Pelletizing Machine Feature:

(1). This Sawdust Pelletizing Machine mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce diameter is 6mm,8mm,10mm,12mm pellets.
(2)The machine adopt imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand
(3)Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .
(4)the machine also matched the safty equipment , once overload , the safty pin will crack, to protecting the machine lifetime

Sawdust Pelletizing Machine Main data:

1.Name:Sawdust Pelletizing Machine
2.Model:MZLH420
3.Capacity:1-1.2t/h
4.Main Power:90kw
5.Feeder Power:1.5kw
6.Force Feeder Power:1.5kw
7.Die Diameter:420mm

Sawdust Pelletizing Machine Quotation Details :

(1)Payment: 40% payment should be prepaid by telegraph transfer, the balanced 60% should be paid within 5(five) days after got the copy of B/L
(2)Delivery Time: 25- 30 days after receive the advance payment
(3)Price based on FOB Shanghai port,China Per Set
(4)Packing: Standard export packing by Fumigation-free wooden cases
(5)MOQ:1set
(6)Validity of Quotation: 2 months
(7) Warranty Period: 18 months except the spare parts

Wood Pellet Making Mill Feature:

(1). This Wood Pellet Making Mill mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce diameter is 6mm,8mm,10mm,12mm pellets.
(2)The machine adopt imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand
(3)Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .
(4)the machine also matched the safty equipment , once overload , the safty pin will crack, to protecting the machine lifetime

Wood Pellet Making Mill Main data:

1.Name:Wood Pellet Making Mill
2.Model:MZLH508
3.Capacity:1.5-2t/h
4.Main Power:110kw
5.Feeder Power:1.5kw
6.Force Feeder Power:1.5kw
7.Die Diameter:508mm

Wood Pellet Making Mill Quotation Details :

(1)Payment: 40% payment should be prepaid by telegraph transfer, the balanced 60% should be paid within 5(five) days after got the copy of B/L
(2)Delivery Time: 25- 30 days after receive the advance payment
(3)Price based on FOB Shanghai port,China Per Set
(4)Packing: Standard export packing by Fumigation-free wooden cases
(5)MOQ:1set
(6)Validity of Quotation: 2 months
(7) Warranty Period: 18 months except the spare parts

Advantages of floating fish feed making machine:

1. This food extruder is widely used for producing floating feed pellets of all kinds of aquatic animal.
2. Advanced technology and humanized design ensures easy operation and reliable performance.
3. High efficiency, low power consumption
4. Screw sleeve of this small fish food extruder adopts enchase alloy steel strip structure, which guarantees long service life.
5. Different moulds can be chosen to make pellets with different diameters and shapes.
6. Feed pellets dia. Is 0.9-15mm.

Technical Features of Myxocyprinus asiaticus Russian sturgeon floating fish feed making machine:

1. This extruder equipment adopts the auto-controlling speed feeding tool to produce the feed material evenly.
2. Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
3. High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
4. The cutting knife adopts the frequency controlling speed in order to change the material size.
5. The floating time can be controlled by the puffing degree adjustment.
6. Auto-temperature control system makes the temperature controlling more direct viewing and the parameter more precise.

Advantages of Chia Supplyer Floating Fish Food Machine:

1. This Food Machine is widely used for producing floating feed pellets of all kinds of aquatic animal.
2. Advanced technology and humanized design ensures easy operation and reliable performance.
3. High efficiency, low power consumption
4. Screw sleeve of this small fish food extruder adopts enchase alloy steel strip structure, which guarantees long service life.
5. Different moulds can be chosen to make pellets with different diameters and shapes.
6. Feed pellets dia. Is 0.9-15mm.

Technical Features of Chia Supplyer Floating Fish Food Machine

1. This extruder equipment adopts the auto-controlling speed feeding tool to produce the feed material evenly.
2. Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
3. High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
4. The cutting knife adopts the frequency controlling speed in order to change the material size.
5. The floating time can be controlled by the puffing degree adjustment.
6. Auto-temperature control system makes the temperature controlling more direct viewing and the parameter more precise.

Descritiong of 5t/H Semi Automatic Poultry Cattle Feed Mill Plan:

1.Feed Mill Plant Widely applied product with mature technology .
2.The main driving adopts high-precision gear drive, so that the output is improved by about 20% when compared with that of belt drive.
3.Imported high-quality bearing and oil seal are adopted to ensure efficient, stable and low-noise whole machine operation . the granulating room is equipped with air suction temperature reducing system .
4.The feeder adopts variable-frequency and variable-speed motor to ensure the quality of discharged particles .
5.Ring dies with multiple kinds of bore diameters are optional . and high-quality craft ring dies are adopted, so that the service life is long. The discharged particles are smooth and the quality is high .
6.International advanced compensation type snakelike spring coupling has the propertied of novel and compact structure, high safety, low noise and low fault rate.
7.Plus-size conditioner and jacket type conditioner are selectable to strength the particle conditioning effect.

Main tenical data of 5t/H Semi Automatic Poultry Cattle Feed Mill Plant:



1.Name:Feed Mill Plant
2.Model:SZL320
3.Capacity:2-5t/h
4.Main Motor Power:37kw
5.Screw Feeder Power:0.55kw
6.Conditioner Power:2.2kw
7.Ring die inner diameter:3200mm
8.Ring die rotational speed:305PRM
9.Roller outer diameter:140mm
10.Size:2300*1000*2100 mm

1.Widely applied product with mature technology .
2.The main driving adopts high-precision gear drive, so that the output is improved by about 20% when compared with that of belt drive.
3.Imported high-quality bearing and oil seal are adopted to ensure efficient, stable and low-noise whole machine operation . the granulating room is equipped with air suction temperature reducing system .
4.The feeder adopts variable-frequency and variable-speed motor to ensure the quality of discharged particles .
5.Ring dies with multiple kinds of bore diameters are optional . and high-quality craft ring dies are adopted, so that the service life is long. The discharged particles are smooth and the quality is high .
6.International advanced compensation type snakelike spring coupling has the propertied of novel and compact structure, high safety, low noise and low fault rate.
7.Plus-size conditioner and jacket type conditioner are selectable to strength the particle conditioning effect.

Detail is:
1.Name:Poultry Feed Pellet Mill
2.Model:SZLH420
3.Capacity:3-12t/h
4.Main Motor Power:110kw
5.Screw Feeder Power:1.5kw
6.Conditioner Power:5.5kw
7.Ring die inner diameter:420mm
8.Ring die rotational speed:287PRM
9.Roller outer diameter:206mm
10.Size:3500*1300*2800mm

1.Animal Feed Pellet Equipment Widely applied product with mature technology .
2.The main driving adopts high-precision gear drive, so that the output is improved by about 20% when compared with that of belt drive.
3.Imported high-quality bearing and oil seal are adopted to ensure efficient, stable and low-noise whole machine operation . the granulating room is equipped with air suction temperature reducing system .
4.The feeder adopts variable-frequency and variable-speed motor to ensure the quality of discharged particles .
5.Ring dies with multiple kinds of bore diameters are optional . and high-quality craft ring dies are adopted, so that the service life is long. The discharged particles are smooth and the quality is high .
6.International advanced compensation type snakelike spring coupling has the propertied of novel and compact structure, high safety, low noise and low fault rate.
7.Plus-size conditioner and jacket type conditioner are selectable to strength the particle conditioning effect.

Technical data of Animal Feed Pellet Equipment:
1.Name:Animal Feed Pellet Equipment
2.Model:SZLH420
3.Capacity:3-12t/h
4.Main Motor Power:110kw
5.Screw Feeder Power:1.5kw
6.Conditioner Power:5.5kw
7.Ring die inner diameter:420mm
8.Ring die rotational speed:287PRM
9.Roller outer diameter:206mm
10.Size:3500*1300*2800mm

v

Feature of Wood Pellet Mill:

(1). This pellet machine mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce diameter is 6mm,8mm,10mm,12mm pellets.
(2)The machine adopt imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand
(3)Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .
(4)the machine also matched the safty equipment , once overload , the safty pin will crack, to protecting the machine lifetime .

Main data of Wood Pellet Mill:
1.Name:Wood Pellet Mill
2.Model:MZLH420
3.Capacity:1-1.2t/h
4.Main Power:90kw
5.Feeder Power:1.5kw
6.Force Feeder Power:1.5kw
7.Die Diameter:420mm

Wood Pellet Mill Quotation Details :

(1)Payment: 40% payment should be prepaid by telegraph transfer, the balanced 60% should be paid within 5(five) days after got the copy of B/L
(2)Delivery Time: 25- 30 days after receive the advance payment
(3)Price based on FOB Shanghai port,China Per Set
(4)Packing: Standard export packing by Fumigation-free wooden cases
(5)MOQ:1set
(6)Validity of Quotation: 2 months
(7) Warranty Period: 18 months except the spare

Wood Pellet Machine Feature:

(1). This Wood Pellet Machine mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce diameter is 6mm,8mm,10mm,12mm pellets.
(2)The machine adopt imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand
(3)Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .
(4)the machine also matched the safty equipment , once overload , the safty pin will crack, to protecting the machine lifetime

Wood Pellet Machine Main data:

1.Name:Wood Pellet Machine
2.Model:MZLH420
3.Capacity:1-1.2t/h
4.Main Power:90kw
5.Feeder Power:1.5kw
6.Force Feeder Power:1.5kw
7.Die Diameter:420mm

Wood Pellet Machine Quotation Details :

(1)Payment: 40% payment should be prepaid by telegraph transfer, the balanced 60% should be paid within 5(five) days after got the copy of B/L
(2)Delivery Time: 25- 30 days after receive the advance payment
(3)Price based on FOB Shanghai port,China Per Set
(4)Packing: Standard export packing by Fumigation-free wooden cases
(5)MOQ:1set
(6)Validity of Quotation: 2 months
(7) Warranty Period: 18 months except the spare parts

Feature of Poultry Feed Making Machine:

1.The main driving adopts high-precision gear drive, so that the output is improved by about 20% when compared with that of belt drive.
2.Imported high-quality bearing and oil seal are adopted to ensure efficient, stable and low-noise whole machine operation . the granulating room is equipped with air suction temperature reducing system .
3.The feeder adopts variable-frequency and variable-speed motor to ensure the quality of discharged particles .
4.Ring dies with multiple kinds of bore diameters are optional . and high-quality craft ring dies are adopted, so that the service life is long. The discharged particles are smooth and the quality is high .
5.International advanced compensation type snakelike spring coupling has the propertied of novel and compact structure, high safety, low noise and low fault rate.
6.Plus-size conditioner and jacket type conditioner are selectable to strength the particle conditioning effect.

Technical Dato of Poultry Feed Making Machine:

1.Name:Animal Feed Pellet Processing Line
2.Model:SZLH420
3.Capacity:3-12t/h
4.Main Motor Power:110kw
5.Screw Feeder Power:1.5kw
6.Conditioner Power:5.5kw
7.Ring die inner diameter:420mm
8.Ring die rotational speed:287PRM
9.Roller outer diameter:206mm
10.Size:3500*1300*2800mm