High-quality automotive diesel fuel manufactured to the EN 590 specification, with sulfur content limited to a maximum of 10 mg/kg (10 ppm). Designed for modern compression-ignition diesel engines.
Applications & ComplianceEmissions Support: Compatible with Euro 5 and Euro 6 engines using advanced after-treatment like DPF (Diesel Particulate Filters) and SCR (Selective Catalytic Reduction).Common Uses: Passenger cars, heavy-duty commercial fleets, buses, agricultural machinery, and industrial logistics
EN590 diesel is a low-sulfur automotive diesel fuel formulated for compression-ignition diesel engines. It is widely used in passenger vehicles, trucks, buses, generators, agricultural machinery and heavy equipment.
Cetane Number : Minimum 51
Cetane Index : Minimum 46
Density @ 15C : 820 - 845 kg/m
Sulfur Content Maximum : 10 mg/kg (10 ppm)
Flash Point : Minimum 55C
Bluestone Oil And Gas Ltd provides high-performance AGO diesel designed for heavy-duty trucks, construction equipment, industrial generators, marine engines, and manufacturing operations. Our diesel offers excellent fuel efficiency, operational durability, and dependable power output for demanding industrial applications.
EN590 10ppm Diesel is a high-quality ultra-low sulfur diesel fuel that meets European standard EN590. It is designed for modern diesel engines, offering clean combustion, reduced emissions, improved engine performance, and compatibility with advanced emission control systems such as Euro V and Euro VI engines.
Sulfur Content: Max 10 ppm (0.001%)
Cetane Number: Min 51 (typical 51 - 55)
Density @15C: 820 - 845 kg/m
Flash Point: >55 C
Viscosity @40C: 2.0 - 4.5 mm/s
Water Content: 200 ppm
Ash Content : 0.01%
Distillation (95%): 360 C
Appearance: Clear, bright liquid
EN 590 is the European standard that specifies the quality requirements for automotive diesel fuel used in diesel-powered vehicles.
Sulfur Content Maximum : 10 mg/kg (10 ppm)
Cetane Number : Minimum 51
Cetane Index : Minimum 46
Density at 15 C : 820 - 845 kg/m
Kinematic Viscosity at 40 C : 2.0 - 4.5 mm
Flash Point : Minimum 55C
Water Content Maximum : 200 mg/kg
Total Contamination : Maximum 24 mg/kg
Polycyclic Aromatic Hydrocarbons (PAH) : Maximum 8 - 11% m/m
Ash Content : Maximum 0.01% m/m
Fuel Type : Ultra Low Sulfur Diesel (ULSD)
Standard : EN 590
Sulfur Content : 10 ppm (0.001%)
Cetane Number : 51
Density @ 15C : 820 - 845 kg/m
Viscosity @ 40 C 2.0 - 4.5 mm
Flash Point : 55C
Water Content : Very low (trace levels only)
Distillation : Controlled boiling range as per EN 590
Lubricity : HFRR 460 um
Appearance : Clear, bright, free from particles
CFPP (Cold Filter Plugging Point) Seasonal grades (summer/winter/arctic)
Aromatic Content : Controlled and limited
a. Name of Product: EN 590 Diesel Fuel
b. Product Grade: EN 590 (Automotive Diesel Fuel-Ultra Low Sulfur Diesel)
c. Minimum Price (USD): USD 550 per MT (indicative, subject to market fluctuation)
d. Maximum Price (USD): USD 850 per MT (indicative, subject to market fluctuation)
e. Price Units: USD per Metric Ton (MT) / USD per Liter (as agreed)
f. Incoterms: FOB, CIF, CFR, DAP, DDP (as per buyer's seller agreement)
g. Product Origin: Europe / Russia / Kazakhstan / Middle East (Non-sanctioned origin as applicable)
h. Key Specifications / Special Features:
Sulfur Content: 10 ppm
Cetane Number: Min 51
Density @15C: 820-845 kg/m3
Flash Point: Min 55C
Complies fully with EN 590 European Standards
Suitable for modern diesel engines
Low emissions & high fuel efficiency
i. Harmonized System (HS) Code: 2710.19
j. Minimum Order Size: 10,000 MT (Bulk shipment)
(Smaller quantities negotiable depending on supply terms)
k. Packaging Details: Bulk shipment via tanker vessel
Storage in terminal tanks
Delivery via tanker trucks (for local distribution)
D2 Diesel Gas Oil is offered by our ends sellers considering needs of diverse industrial sectors. We provide D2 Diesel Gas Oil in different grades. Our D2 Diesel Gas Oil is mainly used to run several industrials as well as commercial automobiles. We take up bulk orders of D2 Diesel Gas Oil and deliver it timely. Our D2 Diesel Gas Oil is available at competitive rates.
Minimum ordered quantity of our D2 Diesel Gas Oil should be 50.000MT
Grade Available : D2 DIESEL GAS OIL L-0.2-62 GOST 305-82
OFFICIAL GUARANTEED SPECIFICATION
FOR RUSSIAN ORIGIN GAS OIL 0,2/62 GOST 305 82
RUSSIAN GAS OIL D2 GOST 305 Â82
COMPONENT INIT MIN MAX
Density@ 20 deg C Kg / m3 0.870
Colour 1.0 2.0
Flash point, PMCC Deg C (C) 57 66
Kinematic viscosity @20 deg C C ST 3.0 6.0
Pour point Deg C (C) (*) 10.0
Cloud point Deg C (C) (*) 5.0
Mercaptan Sulphur 0.01
Acidity, mg / 1000 cm3 5
Iodine number g/100g 6
Ash %wt 0.01
Total Sulphur %wt 0.01 0.02
Copper corrosion 3hrs@50 deg C (Typical) 1 A
CCR on 10% Residues %wt 0.20
Cetane Index 45
Distillation range:
- 50% Recovered Volume deg C (C) 280
- Â90% Recovered Volume deg C (C) 350
- Bacteria MBC Fibre / it 500
- Bacteria CFU Fibre / it 1000
The product is guaranteed by Seller not to contain bacteria and other living organism contamination above normal level (1000 CFU/l).
Gasoil or D2 is the second distillate obtained from crude oil There are varying contents of sulphur in Gasoil and D2 products that will affect when the fuel is best to use seasons and the cost thereof To ensure that clients are provided with suitable D2 products there are ISO industry standards that suppliers must adhere to
Gasoil
Gas oil forms part of a family of heavy oils It is created by means of a process of fractional distillation of petroleum It is used as a diesel fuel in heating and automotive applications Gas oil that is used to power offroad vehicles that are used in the industrial commercial and agricultural communities is often called red diesel Fuels and oils are taxed differently depending on their purpose gas oil used for tractors mowers and tippers are dyed red in order for inspectors to tell the difference Other gas oil is considered white diesel as it is not dyed
D2 Gas Oil
This is gas oil that is the second distillate and is obtained through the processing of crude oil Reformers and additives are not required to make use of this fuel The version of D2 that has lower sulphur content is called GOST 30582 It is presented to the market as a major reduction in pollution gas oil
GOST 30582
GOST 30582 is D2 with lower sulphur content GOST is a variant of Gasoil and D2 that is in line with ISO industry standards with a sulphur content of 002 max This is known as Ultra Low Sulphur fuel Low sulphur fuel is that with 02 sulphur content
NSRIC Green Supplies Inc. (NGS) specializes in the seamless, secure, and profitable global trade of high-demand petroleum products, including EN590 Ultra Low Sulfur Diesel (ULSD) 10 PPM.
As a licensed intermediary, NGS connects authenticated end buyers with trusted, vetted global sellers to facilitate secure transactions for this crucial commodity. Our expertise ensures that every deal for EN590 ULSD 10 PPMâ??the benchmark for clean, high-performance diesel fuelâ??meets strict international quality and compliance standards, specifically the 10 parts per million (PPM) sulfur limit. This low sulfur content is vital for reducing harmful emissions and is mandatory for most modern diesel engines in regulated markets.
Partnering with NGS guarantees transparency, verified documentation, and secure logistical coordination from negotiation through delivery. Whether you are an established bulk purchaser or a reliable seller, we manage the complexities of global supply chain logistics, trade finance, and legal compliance. Choose NGS for a streamlined, profitable, and risk-managed solution for your EN590 ULSD 10 PPM requirements. Secure your supply chain excellence with NGS.
NSRIC Green Supplies Inc. (NGS) is your trusted, licensed intermediary for the secure and efficient global sourcing of EN590 ULSD 50 PPM (Ultra-Low Sulfur Diesel). This essential petroleum product is critical for transportation, industrial operations, and power generation, meeting stringent European specifications (EN 590) with an exceptionally low sulfur content of 50 parts per million.
We specialize in connecting serious end buyers with verified, high-volume sellers, eliminating risks and complexities inherent in international oil trade. NGS manages the entire process from robust seller verification and contract negotiation to secure logistics and financial transaction oversight. Our expertise ensures full compliance with international standards, delivering guaranteed quality and quantity.
Partnering with NGS means gaining a secure, profitable, and seamless supply chain solution. We are committed to transparency and due diligence, safeguarding your interests and maximizing the efficiency of your procurement. Trust NGS to bridge the gap in your global petroleum commodity needs. Contact our trade specialists today to discuss your global supply chain requirements.
NSRIC Green Supplies Inc. (NGS) is your trusted, licensed intermediary for the secure and seamless global trade of D6 Virgin Low Pour Fuel Oil. As a crucial commodity in the energy sector, D6 fuel oil is primarily used in power generation, shipping, and large industrial heating applications, demanding reliable and consistent supply.
We specialize in de-risking the complex international trade process. Our rigorous vetting ensures that all D6 supplies meet strict global quality standards, and we only engage with verifiable, top-tier sellers and end-buyers. NGS manages the entire transactional lifecycleâ??from verifiable Proof of Funds (POF) and Proof of Product (POP) to secure logistics and payment protocolsâ??guaranteeing transparency and accountability.
Partnering with NGS means gaining a secure supply chain for your D6 VLPFO needs, minimizing transactional fraud, and maximizing your profitability. Trust the expertise of a reliable intermediary to facilitate your next high-volume, global energy transaction. Contact us today to secure your D6 Virgin Low Pour Fuel Oil supply.
