Myanmar has historically dominated premium teak supply â?? but US, EU, UK, and Canadian sanctions now expose Western buyers to severe legal, financial, and reputational risk. Thai Gold Teak is the compliant alternative: plantation-grown, fully documented, and free of sanctions exposure.
Species : Tectona grandis â?? plantation-grown
Heartwood : Rich golden tone, tight natural grain
Properties : High natural oil content, durable & stable
Processing : Kiln-drying available for North American & European climates
Compliance : 100% legal â?? zero Myanmar / sanctions exposure
Documentation : Full provenance, COO, phytosanitary & FSC on request
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Refit is a product ideal for temporarily re-cementing dislodged crown bridges, veneers, facings, inlays and onlays (fixed prosthesis) which otherwise are normally permanently fixed in the mouth.
Pack size 6
Subject to quantities, all prices are negotiable.
Export from the UK.
Your Gateway to Quality and Reliability:
My commitment is to provide a seamless and trustworthy experience for clients seeking excellence in the products I represent. I prioritize quality, reliability, and transparency in every transaction.
Let's embark on a journey of international business growth together! If you're looking for a reliable partner in the fields of medical equipment, pharmaceuticals, basmati rice, automobile parts, or gemstones, feel free to connect. Your success is my priority!
Reactors are designed, manufactured and supplied in accordance
with GOST R 52630 : 2006, OST 26.291â??94 and/or EN 13445 4:2002, ASME Section VIII Div.1&2. Criteria for selection of materials for manufacturing of
reactor shells and piping are based on rich practical experience of AEM specialists in the sphere of oil refining, chemical and power units. Vessel designs may be complemented with other elements depending on input technical requirements and process parameters as defined at design stage
Technical specifications
Diameter: up to 5000 mm Nominal
pressure: up to 20 MPa
Wall thickness : up to 300 mm
Design fluid temperature: up to 550C
Material: single metal plated with corrosion resistant material, type
08�¥18�?10�¢, 0813, or other as required by technical design
Internals UOP, AXENS, RIFING, etc.
Service life : 30 years
Medical protective equipment:
1. Respirators and Masks
- FFP2 Respiratory protective mask without valve, 94 % filtration Europe certified: EN 149:2001+A1:2009 (Modul B und C2)
- Oral and nasal protection mask Medical device class I, not sterile, Non-woven, disposable
- Operating mask Medical device class II, sterile Non-woven, disposable
2. Infection protection goggles
3. Working clothes for nursing staff
Pants/cassocks for nursing staff in surgeries and clinics
Disposable protective gowns for staff and visitors
Surgical gowns
Protective suits
4. Corona Rapid tests
Tooth-Fil is a ready-to-use temporary tooth filling material based upon zinc oxide putty that is presented in a pre-filled plastic syringe. The 3g pack contains sufficient material for 10 standard fillings and comes complete with a spatula. Tooth-Fil fillings can last up to 4 weeks, as approved and sold by many dentists and pharmacists. Tooth-Fil hardens on contact with saliva and is easy for dentists to remove to make a more permanent filling.
Pack size 6.
Subject to quantities, all prices are negotiable/
Export from the UK.
Our Principle is the exclusive distributor and stockistof awiderangeDrilling Equipments & Spares from internationally renowned manufacturers in Europe & USA who are ISO and API Certified.
1. Brew House Make & Capacity:
Steinecker1995 -1999
5 brews/d, 450-500 hl/brew. for 7000 kg malt, 3850 Raw grain
Cast-out quantity: 500 hl, 16,5° Plato
8 Brews/ 24 hours, annual capacity 0.85 Mhl
Controls are based on Siemens S5 and S7 PCS with, Botec Control system, PC Windows 2000 (Steinecker)
Laboratory yield = 97.1% (2.1.09 – 28.5.09, 837 brews)
The Brewhouse was installed in 1996 - 1999 by Steinecker to a high standard of control and automation and it contains the following main equipment:
Wet Conditioning Mill, capacity 20 tons/hour and it is fully overhauled 2008
Configuration, main characteristics:
1 wet mill plant: 20 t/h
1 mash tun kettle plant: V=550 hl
1 lauter tun plant: D=7200mm
1 weak wort tank: V=155 hl
1 pre run vessel: V=640 hl
1 CIP- water distributor
brew/whirpool kettle hot wort max. 520 hl (1 brew / 5 hours)
wort cooling 400 hl/h, 10°C
- Mash Kettle, a jacketed vessel 550 hl
- Enzyme Dosing pot and pump
- Lauter Tun complete with spent grain tank and Pondorff pneumatic grains transfer. Tun capacity 814 Hl and diameter 7200 mm, Solids capacity of 7000 kg malt and 3850 kg raw grain. Complete with internal rakes and scrapers
- Pre Run Vessel complete with internal heater , volume 640 hl
- Wort Boiler/ Whirlpool, gross volume 757 hl net 520 hl
- Wort Cooler with aeration – GEA supplied plate heat exchanger (YOM 1990) – rated at 450 Hl/hr cooling the wort from 95oC down to less than 10oC. Cooling achieved with brewing water and then chilled water. Aeration achieved by use of a sintered disc and static mixers, and controlled manually using mass flow meters
- 2 Hop Pellet Tanks
- 2 Hop Oil Tanks
- Brewhouse Weak Wort Tank, volume 150 hl
- Alfa-Laval Decanter, year 2008, capacity 100 hl / h
- 2 Weak Wort Tanks, volume approx 80 hl each
- Gypsum Tank, volume approx 40 hl
- Wet starch tank – volume 100 hl
- Spent Grains Silo
- Spent Grains Drying System
- Bulk Acid tank – plastic tank with integral bund and dosing pumps
Ferrous metals â?? iron and its alloys (steels, ferroalloys, cast irons), account for more than 90% of the total volume used in the economy of metals, of which the main part is made up of various steels, steel tubes, steel coils, rebar, rubber.
Ferrous metals are used to make railway rails, pipes for transporting oil and gas, metal scaffolding, anchors for swimming facilities, nails, needles, springs, and much more.
36415 Dental Equipments Materials Suppliers
Short on time? Let Dental Equipments Materials sellers contact you.
