Find Verified Rubber Chemicals Suppliers, Manufacturers and Wholesalers

Enhances the processing of rubber.

cx100.

For price, specifications and other details please contact us.

JC CURE ZBP non Staining nitrosamine-free accelerator for EPDM and other diene elastomers, used as a Secondary accelerator in the efficient vulcanization of NR and other rubbers, such as IR, SBR, NBR, and IIR, EPDM. It is used in conjunction with sulfenamide, thiazole, thiuram and carbamate. It offers very good processing safety and does not bloom, for NR demonstrates excellent reversion and heat aging resistance.

Packing Size: 25 kgs

Available Form: Powder

Technical Data Sheet
Product Name : JC CURE ZBP

Chemical Name : Zinc Dialkyldithiophosphate

Composition : 70 % zinc dialkyldithiophosphate and 30% silica

Appearance : White Powder

Storage : Store in a cool dry place away from moisture and sunlight

Stability : 24 Months from date of manufacture

Advantages
Due to excellent dispersion and solubility a constantly high quality is achieved. Cycle times can be shortened by high crosslinking rates. Faster extrusion speeds are also achievable. Lifetimes increased due to resistance to thermal ageing. Freedom from nitrosamines and poisonous substances, solve occupational health problems.

All Types of Rubber compounds,requiring a quick
incorporation in the mix and an excellent dispersion, avoid fly loss.

Packing Size: 25 kgs.

Available Forms: Powder

Technical Data Sheet
Product Name : JAYSULF-96

Chemical Composition : 96%Sulphur, 2% MgCO3 and 2 % dispersing and wetting agents

Appearance : Free Flowing Yellow Powder

Product Description : 1305-62-0

Appearance : 96% Sulfur (Micronized to uniform particle size of 325 mesh) is conditioned with MgCO3 and dispersing and wetting agents to produce easy and uniform dispersion of Sulfur in natural rubber and synthetic rubber and especially in Nitrile Rubber.

cross-linking activator particularly for fluoro elastomers used to achieve optimal compression set values at higher temperatures. It is normally used in combination with a fine particle size magnesium oxide.

Packing Size: 9 kgs.

Available Forms: Powder

Technical Data Sheet
Product Name : JC EG - 81

Function : Filler and Acid scavenger in FKM and other rubber and plastics.

Technical Name : Calcium Hydroxide

CAS No : 1305-62-0

Appearance : White Powder

Calcium Hydroxide % ; 97.0 Min

Sieve Residue (325 Mesh)% : 0.5 Max

Moisture Content % : 1 Max

Mode of action : JC EG - 81 is a cross-linking activator, particularly for fluoro elastomers used to achieve optimal compression set values at higher temperatures. It is normally used in combination with fine particle-size magnesium oxide.

Processing : It is advisable to add JC EG - 81 together with the fillers or straight afterward, As JC EG - 81 is very hygroscopic therefore should, not be weighed until just before the incorporation in the mix

Dosage : Normally 6-7 PHR JC EG - 81 in combination with 3PHR Magnesium oxide

Packing : 9X1Kg EVA/PP Packet per box

Storage : Stored in cool and dry atmosphere

Advantages
cross-linking activator particularly for fluoro elastomers used to achieve optimal compression set values at higher temperatures. It is normally used in combination with a fine particle size magnesium oxide.

Product :
Aromatic rubber process oil ( Light & Heavy grade )

Description :
Aromatic rubber process oil has the first characteristics of aromatic hydrocarbons & are having the presence of the double guaranteed combine ring carbon structure.
Aromatic extracts procured from chosen refineries and appropriately homogenized to satisfy tight specifications, are used for combination batches to manufacture Tyres, calendared and moulded sheets, Tread rubber etc.

Aromatic grade of rubber process oil, dark in colour. it's a primary aromatic hydrocarbon, blended with carefully selected aromatic extracts. Rubber process oil (RPO) are used during mix of rubber compounds. These help in improving the dispersion of fillers and flow characteristics of the compound during any processing.

Application:
It is used in the manufacture of automobile tyres, beltings, mats, shaped rubber components Etc. it's good solvency & is compatible with wide range of rubbers like NR, SBR and PBR.

Packing :
20 MT flexi bags , New steel drums & Reconditioned steel drums

Minimum ordered quantity :
100 MT

Price offered in :
FOB / CFR / CIF basis

Payment terms :
30 % advance & balance against draft BL copy

Styrene Butadiene Rubber, Payment Terms : T/T, Bank or Wire Transfer, PayPal, Western- Union, Ria-Transfer Total or Minimum order Quantity ?, For Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well

Wholesale Colorless Rubber Crumb Polyurethane Adhesive glue
Waterproof Rubber Binder,
Mix with EPDM or SBR rubber granules, to install running track, playground, sport courts, jogging track, park, etc.
20kg/bucket, 960kg/pallet, 19.2ton/20ft container
200kg/drum, 16ton/20ft container

we produce rubber powder from truck & bus Tyres only. so our rubber powder has high quality and free from fiber and steel

Bright Future factory can produce high quality reclaimed rubber from scrap tires .
our factory used environmental matriculate chemical
our Rubber was tested in European laboratories free of diseases

Rubber Accelerators (MBT, MBTS, CBS, DPG), Rubber Antioxidants (TMQ, IPPD, 6PPD), and Anti scorching Agent (PVI)

Rubber Process Oil are rich aromatic by products from solvent extracting process to modify physical properties of the vulcanization and to reduce the cost of the finished product.

Typical Uses / Applications
As component in rubber formulations and manufacturing of products such as automobile tiers, rubber shock absorbers, footwear, industrial hoses, wire and cable coverings, flooring materials and carrier fluid or solvent in manufacture of adhesives, sealants, polishes and carbon black
To improve physical properties of vulcanization to reduce the cost of finished rubber compounds
Tyre, Rubber and Dhoop Industry
Used as a Lubricant in Rubber Processing
Used in manufacturing of White Oil
Used as a component in Ink Production

EPR Lumps Industrial Grade

Silicone rubber surfactant (Organic silicone surface additive) Application:
It can be used as a spray modifier, foliar absorption aids, activation agent, widely used herbicide, liquid nutrients, growth regulators, insecticides, fungicides, which do not decompose the original pesticide, can greatly reduce the surface tension of the solution, reducing the contact between the droplet and the leaf angle, surface enhanced the liquid in the plant or pest surface wetting, adhesion, and a spreader, thereby improving efficacy.
Silicone surfactant ZINCA-2000 is lower phytotoxicity and environmental hazards than the normal fatty amines, ethoxylated alcohol surfactant, and greatly reduce human and environmental impact.

Panama Petrochem Ltd, manufactures Rubber Process Oils which are widely used across various industries and are popular as safe and environment friendly products. Different grades of superior quality Rubber Process Oils are offered which are used for the manufacturing of various rubber produces, from both natural as well as synthetic rubber.
Under the brand name Panol, 3 Grades are offered namely,

PANOL C 160-A – (Aromatic Base)
PANOL C 160-P – (Paraffinic Base)
PANOL C 160-N – (Naphthenic Base)

Also, Speciality Rubber Process Oils meeting European Regulation for non-carcinogenic oils, Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE), are offered on request.

PANOL C 160-A

Panol C 160-A is an Aromatic type of Rubber Processing Oil, formulated from specially selected aromatic furfural extracts with higher aromatic content. It is available with different viscosities as required for different applications.
High rubber and polymer solvency

Widely used in the manufacturing of automotive tyres and tubes, bi-cycle tyres, tyres retreading materials, belting, hoses, battery containers, extruded products and technical moulded goods
Highly suitable for Natural Rubber, Styrene Butadiene Rubber, Polybutadiene Rubber and Neoprene Rubbers
Offers good compatibly and is suitable for use with Natural Rubber, SBR, PBR, CR etc.

PANOL C 160-P

Panol C 160-P are Paraffinic type Rubber Processing / Extender Oils formulated from highly refined solvent extracted base stocks of low sulphur content.
These oils are used in the manufacturing of butyl tubes and a variety of technical moulded and extruded products based on polar rubbers like EPM & EPDM etc.
They have good thermal stability and are suitable in the manufacture of light coloured products and because of their high paraffinic content and viscosity, these oils are preferred for achieving high retention of properties after ageing and higher loading of oil
They are used for heat resistant conveyor belts and steam hoses

PANOL C 160-N

Panol C 160-N serws grades are Napthenic type Rubber Processing / Extender Oils formulated from carefully selected Hydrotreated Napthenic base stocks.
These are non-staining in nature and posses excellent thermal, oxidation and colour stability
They are recommended in the manufacture of automotive tubes, light coloured non-back footwear products and also moulded and extruded goods
They are compatible for processing with NR, SBR, PBR, Butyl and EPDM rubbers
Special tailor-made blends are also available for TPR and other specific applications

SPECIALITY RUBBER PROCESS OILS

We manufacture and offer Speciality Rubber Process Oils meeting European Regulation for non carcinogenic oils. We have a wide range of Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE).

All Types of Rubber compounds,requiring a quick
incorporation in the mix and an excellent dispersion, avoid fly loss.

Packing Size: 25 kgs.

Available Forms: Powder

Technical Data Sheet
Product Name : JAYSULF - 54

Function : Curing agent for all natural and syntheticrubbers

Appearance : Light Yellow Powder (low dust)

Composition : 99% Sulfur (Micronized to uniform particle size of 325 mesh), 1% Additive for low dust

Mode of action : Sulfur is a curing agent for all natural and synthetic rubbers, requiring quick incorporation in the mix and an excellent dispersion, the homogeneous dispersion in the rubber avoids the occurrence of localized over-cured zones. In this way, optimal activity of the effective substance is assured. Coating of Sulfur avoids fly loss helps in keeping the environment clean.

Dosage : The dosage is the same as normal sulfur

Material Properties Ref to : COA

Advantages
Coated Sulfur will give the folowing benefits


Shorter mixing time

Better dispersion
Reduced batch-to-batch variation
Reduced Fly loss (Environment friendly)

Effective as a desiccant in both plastic as well as rubber applications.

Packing Size: Customized as per requirement.

Available Forms: Powder

Technical Data Sheet
Product Name : JC CaO - T

Chemical Name : Calcium Oxide (treated with1% Organic Compound)

Appearance : Fine white/off whitepowder.

Solubility : Insoluble in water and soluble in mineral acids

Special features : JC CaO T is made from soft stone with advance calcination technology which is resulting with high surface area, high activity and low Iron content. Special surface coating

enhances the dispersion in rubber and plastic applications. There will be not any unintended reaction with humidity.

Mode of action : Calcium Oxide binds the moisture by the formation of calcium hydroxide, hence used as a desiccant to remove excessive moisture from rubber compounds CaO is preferably used in extrusion compounds which have to be cured continuously either in open air, like (fluid beds, salt baths) or in UHF curing process like (microwave units, and hot air channels), also used in the foamed compounds to improve the cell structure and surface finish of the end product. It can be effectively used in reprocessing of thermoplastic materials.

Calcium Oxide : 94% Min.

So. Gr. at 25oC : 3.3 + 0.1

Bulk Density (gm/ml) : 0.65 + 0.1

Al2O3 : < 1.0 %

SiO2 : < 2.0 %

Fe2O3 : < 0.025 %

Sieve residue 325 mesh : < 1.0 %

Sieve residue 200 mesh : Nil

Mean Parcle Size Micron (D50%) : 4.5 - 6.5

Packing : Customize packing with EVA/PP Bag.(Normally 1 Kg Pack X20 Kg or 10 KgX2 Pack /Bag)

Storage : Stored in cool and dry place, moisture strictly avoided

Advantages
CaOT is preferably used in extrusion compounds which have to be cured continuously either in open air, like (fluid beds, salt baths) or in UHF curing process like (micro wave units, and hot air channels), also used in the foamed compounds to improve the cell structure and surface finish of the end product. It can be effectively used in reprocessing of thermoplastic materials

Effective as a desiccant in both plastic as well as rubber applications.

Packing Size: Customized as per requirement.

Available Forms: Powder

Technical Data Sheet
Product Name: JC CaO - T

Chemical Name :
Calcium Oxide (treated with1% Organic Compound)

Appearance : Fine white/off whitepowder.

Solubility : Insoluble in water and soluble in mineral acids

Special features : JC CaO T is made from soft stone with advance calcination technology which is resulting with high surface area, high activity and low Iron content. Special surface coating

enhances the dispersion in rubber and plastic applications. There will be not any unintended reaction with humidity.

Mode of action : calcium Oxide binds the moisture by the formation of calcium hydroxide, hence used as a desiccant to remove excessive moisture from rubber compounds CaO is preferably used in extrusion compounds which have to be cured continuously either in open air, like (fluid beds, salt baths) or in UHF curing process like (microwave units, and hot air channels), also used in the foamed compounds to improve the cell structure and surface finish of the end product. It can be effectively used in reprocessing of thermoplastic materials.

Calcium Oxide : 94% Min.

So. Gr. at 25oC

3.3 + 0.1

Bulk Density (gm/ml) : 0.65 + 0.1

Al2O3 : < 1.0 %

SiO2 : < 2.0 %

Fe2O3 : < 0.025 %

Sieve residue 325 mesh

< 1.0 %

Sieve residue 200 mesh : Nil

Mean Parcle Size Micron (D50%) : 4.5 - 6.5

Packing : Customize packing with EVA/PP Bag.(Normally 1 Kg Pack X20 Kg or 10 KgX2 Pack /Bag)

Storage :
Stored in cool and dry place, moisture strictly avoided

Advantages
CaOT is preferably used in extrusion compounds which have to be cured continuously either in open air, like (fluid beds, salt baths) or in UHF curing process like (micro wave units, and hot air channels), also used in the foamed compounds to improve the cell structure and surface finish of the end product. It can be effectively used in reprocessing of thermoplastic materials.

Coupling agents are used in the rubber industry to improve the wear resistance and aging resistance of tires, rubber sheets, rubber hoses, rubber shoes and other products, and can reduce the amount of NR, thereby reducing costs.

ELD-YG69 can be used to used in rubber industry to improve modulus and tensile strength of rubber, to reduce the compound viscosity and save process energy consumption. It is especially applicable for polymers with double bond or rubber formulation with hydroxyl fillers. The suitable fillers include silica, silicate, clay, etc. The suitable rubber include natural rubber (NR), Butadiene styrene rubber (SBR), Isoprene rubber (IR), Butadiene rubber (BR), Acryloni-trile butadiene rubber (NBR), Ethylene propylene diene rubber (EPDM), etc.

Rubber Processing Oil

Rubber Process Oils are used during mixing of rubber compounds. These help in improving the dispersion of fillers and flow characteristics of the compound during further processing. Rubber processing oils are specially developed taking into consideration the type of rubber and the end product applications.