Find Verified Construction Materials Suppliers, Manufacturers and Wholesalers

HD Injection Post Industrial material separate & mix color...

It is used in mortar for plastering, masonry work, pointing, etc.
It is used for making joints for drains and pipes.
It is used for water tightness of structure.
It is used in concrete for laying floors, roofs and constructing lintels, beams, stairs, pillars etc.

Gray Crushed Marble

The primary use of clinker is to manufacture cement. Cement is used in construction to make concrete as well as mortar and to secure the infrastructure by binding the building blocks. It is also used for water-proofing, filling or sealing gaps, and making decorative patterns.

Our product (ProBond-SS) is a water-based polymer product that can help in:

* dust and sand control
* Reduce Construction Cost
* Reduce Maintenance Cost
* Reduce Environmental Impact
* Fast results

The product can be used in:

* Stabilization and dust control of open desert sand.
* Polymer Sand road alternative to asphalt.
* Dust control on construction sites.
* Dust and erosion control of highway embankments and pipeline embarkments, railways, helipads, and pedestrian walkways.

Also, our product is environment friendly.

PROPHALTis a revolutionary, high-performance, flexible, reactive repair product for use in repairing asphalt and concrete road surfaces PROPHALT reacts with water to provide a permanent repair solution. All sizes are free of solvents or volatile organic compounds (VOCs). PROPHALT comes in three (3)
sizes (4.0mm, 6.0mm, & 9.0mm) for surface, intermediate, or base repairs for any type of asphalt or concrete road repair.

Contact Adhesive is an extra-strong, quick-drying,
e. It will repair a wide range of materials
including wood, hardboard

It is good for paper lamination, cardboard to print, or lacquered carton, mainly used in Paper Core and general bonding of paper also.

HP-55C is a modified Vinyl Acetate homopolymer emulsion with good film-forming
properties.
HP55C is a very tacky adhesive that develops rapid early legs, grabs quickly, and provides an
exceptionally strong permanent bonds.

WG 50 especially for binding wood. It also can you paper and corrugated boxes.

PVC overlay: lamination of decorative PVC foils on MDF, Plywood, gypsum boards, and other cellulosic fiberboards.
Suitable to bond BOPP and polyester film on similar wooden or cellulosic boards, Side Gluing/folder gluing of cartons and corrugated boxes, Lamination of paperboards for multiwall

PVA glue iAdPro 1051 is best used for cardboard, light wood, paper, and other such materials. It does form a strong bond, it dries quite quickly and remains flexible once dry.

Solid board regular type is available in several thickness and edges to meet the construction needs. It contains a non-combustible gypsum core that accommodates a variety of decorative finishes after proper surface preparation.

Standard sizes and shapes:
Thicknesses: 12.5, 15 & 16 mm
Width: 1200 mm
Length: 1830 mm, 2400 mm & 3000 mm
Edges: squared & tapered
Other thicknesses and lengths are available at request.

Premium Natural Marble & Travertine Slabs Available in Bulk Quantities

We offer a wide selection of premium natural marble and travertine slabs, suitable for commercial, residential, hospitality, and high-end architectural projects.

Product Specifications:

Material: Natural Marble & Travertine

Thickness: 20 mm (2 cm)

Surface Finish: Polished / Honed

Unit: Square Meter (SQM)

Available Quantities: Bulk Stock

Different Colors, Patterns and Natural Veining

Available Marble & Travertine Varieties:

Volakas Arabesque, Volakas Haemus, Statuario T Vena Fina, Statuario Venatino Extra, Bianco Statuario Silver, Blue Cohiba, Thassos Vein A1, Pirgon Arabesque, Pirgon Select, Pirgon Alas, Bianco Gioia, Alpine White, Bardiglio Dark, Bianco Neve, Montclair Premium, Striped Grey, Volakas Haemus Diagonal, Zebrino Fantastico, Beige Bronzetto, Travertine Noce V.C and Travertine Super White.

Applications:

Flooring and Wall Cladding

Luxury Hotels and Residential Projects

Commercial Buildings

Interior Decoration

Countertops and Architectural Features

Competitive pricing available for bulk purchases.

Detailed material photographs and stock quantities are available upon request.

Please contact us with your required material type, quantity, and delivery destination for a customized quotation.

Fire bricks & insulation material for industries, sanitary ware, refractory cement.

Loose palletized and cement in poly bag / paper bag.

We have readily available Disposable Face Mask FOB ready for shipment from our warehouse in India.

Specification:
3 Layer, Non-Woven Fabric, Skin Friendly, Breathable and manufactured in a high sterile condition which help us to provide the best quality masks for your usage.

Price:
1 mask price FOB 0.33 USD

Available Quantity:
1,000,000 Mask

Terms and Condition:
100% Advance Payment upon confirmation of order

Delivery Type:
FOB in Mumbai Port, India

Trader Operational Headquarter:
Dammam,KSA

We offer second-quality rails R50/R65 for manufacturing and construction needs globally. Rails can be delivered to the destination port under a longer contract and monthly shipments based on your demand.

Second-quality rails are used in the industry instead of used rails or scrap rails R50/R65. Second-quality railways from Baghlaf Steel are new rails. The quality of the steel in the second-quality rails is better than the quality of scrap rails because these second grade rails are not used.
Manufactured in accordance with international railway standards (GOST 8165-75 / equivalent international standards)

Standard T-Section Railway Rails

Nominal weight:
R50 - 51.67 kg/m
R65 - as per standard specification

- Suitable for railway track construction and infrastructure projects
- Supplied free from defects, cracks, harmful surface imperfections, or structural irregularities
- Delivered with Mill Test Certificate (MTC) confirming chemical and mechanical properties
- HS Code: 7302 - Railway or tramway track construction material of iron or steel
- (R50 / R65) Chemical composition shall be according to GOST 8165-75 or equivalent international standard

Chemical Composition:

R65 GOST 8165.75 WEIGHT 64.72 KG /METER

C = 0.54 % _ 0.82%
SI = 0.18 _ 0.40%
MN = 0.60 _ 1.05%
S = 0.04% _ MAX
P = 0.035% AS - 0.01 MIX OF MASS SHARE

R50 GOST 7173.75 WEIGHT 51.67 KG /METER

C = 0.54 % _ 0.82%
SI = 0.18 _ 0.40%
MN = 0.60 _ 1.05%
S = 0.04% _ MAX
P = 0.035% AS - 0.01 MIX OF MASS SHARE



The Deal Work Steps:

- LOI: The buyer sends a Letter of Intent through the agent specifying the iron quantity, type, payment method, and delivery port.
- FCO: The supplier replies with a signed Full Corporate Offer confirming availability, specifications, and price.
- Proforma Invoice: If the buyer agrees, the supplier issues a signed and certified Proforma Invoice with quantity, price, delivery details, shipments, and payment terms.
- Letter of Credit: The buyer opens a confirmed LC via SWIFT MT700 covering the full invoice amount.
- Execution: After the LC is approved, inspection and shipment start within a few days.


ORIGIN: SAUDI ARABIA
MINIMUM ORDER QUANTITY (MOQ): 700,000 MT
MAXIMUM MONTHLY SHIPMENT: 500,000 MT
DELIVERY TERMS: CIF (INCOTERMS 2020)
HS CODE: 730210000000

Accepted Payments:

- Confirmed MT700 At sight letter of bank credit for the full value of the Proforma Invoice issued by our Company.
- The revolving L/C MT700 bank credit with the bank's guarantee and its responsibility for the entire value of the Proforma Invoice.
- Standby Letters of Credit (SBLC)

40,000 tons available of used pipe lines .
The pipes from ARAMCO .( SAUDI PETROLIUM CO)
It is used PIPES .

Garnet Stone(Decoration)

Bazalt Stone

Volcanic Tuff/ Red Pumice

Limestone

Quartz Pebbles

Quartz Pebbles

Description
Packaging Size: 35 kg
Color: White
Packaging Type: PP Sack Bag
Density: 2.65 g/cc
Purity: 99%

Description
Marble Powder Calcium Carbonate is considered the second purest source of calcium carbonate in nature, where the percentage of calcium carbonate reaches 97% CaCo3. After the stage of mining and extracting raw marble from our quarries in the Kingdom, it is crushed in our crushers to get marble chips. Then sorting it from impurities, sifting it, and grinding it to get marble powder called calcium carbonate. It is used in many industries after being sifted and classified in our factories. It can also be used to equalize the pH to reach PH7 in water treatment projects.

It contains more than 19.5% of magnesium oxide and more than 29% of calcium oxide. It is less than 0.3% of silicon oxide, less than 0.7% of alumina oxide, and less than 0.1% of iron oxide, (or less than 0.03-0.04% of iron oxide for unpainted glass). Dolomite marble powder is added in sizes from 100-250 microns.

In the coating industry (paints), marble powder calcium carbonate is an essential material, as it forms from 30 - 40% of the paint components and is preferred over calcium carbonate powder due to its crystalline nature. The powder is included in the process of manufacturing paint as a filler to improve some of the paint's natural properties such as thermal resistance, thermal conductivity, density, controlling viscosity, preventing flow, reducing oil absorption, and increasing hardness, by combining it with particles of colored or adhesive materials to form a cohesive and stable material with a high flow. The granular size of the powder should not exceed 20 microns. Some of the paints used in exterior wall cladding require marble powder in sizes 0.3 to 1.2 mm.

In the plastics industry, marble powder is used as a basic material in the manufacture of many plastic products such as water and drainage pipes, electrical cables, some parts of electrical equipment, some auto parts, children toys, plastic bags, tableware food preservatives and dishes, decorations, and others. It improves the physical properties of the plastic product, it makes it resistant to deformation as it increases its hardness and resistance by increasing the modulus of elasticity. It reduces the thermal expansion coefficient, makes it have a good external appearance and soft touch, and keeps it from sloughing. In addition, it makes it easy to form by increasing its fluidity and dispersion and reducing production costs.

Description
Marble Chips are metamorphic rocks formed by the alteration of limestone by heat and pressure. In its pure form, marble is a white stone with a
crystalline and sugary appearance, consisting of calcium carbonate CaCO3. Usually, marble contains other minerals, including quartz, graphite, pyrite, and iron oxides. It is used for its chemical properties in pharmaceuticals and agriculture. It is used for its optical properties in cosmetics, paint, and paper. They are used as Industrial Raw Materials with other industrial raw material products such as Silica Flour, Limestone, Aggregate, Quicklime, Talc, Volcanic Rock and Abrasives.

Marble is usually a light-colored rock. It is one of the most effective acid-neutralization materials. Being composed of calcite, marble has a hardness of three on the Mohs hardness scale. As a result, marble is easy to carve, and that makes it useful for producing sculptures and ornamental objects. After being sanded with progressively finer abrasives, marble can be polished to a high luster. This allows attractive pieces of marble to be cut, polished, and used as floor tiles, architectural panels, facing stone, window sills, stair treads, columns, and many other pieces of decorative stone. Marble chips work best when used in paths and patios as a substitute for gravel. Although gravel often is used as inorganic mulch around plants, marble chip mulch's reflected sunlight can be too intense for plants in full-sun locations. Today, marble is quarried all around the world and is used to create giant monuments, it is used in building, even down to applications as simple as kitchen counter tops. Itâ??s classified as a metamorphic stone, which means that it has changed composition over time from one type of rock to another.
Also used in:

Building Stone
Countertops and sinks
Floor tiles
Terrazzo marble chips mixed with concrete to form floors.
Tomb Stone

High-quality steel drums manufactured for industrial storage and transportation applications. Suitable for chemicals, oils, lubricants, paints, food-grade materials (subject to lining requirements), and general industrial usage. Available in open-top and closed-top designs with customized sizes, colors, coatings, and branding options as per customer requirements. Durable construction ensures safe handling and long service life.

Description
Gravel is used in Water Filtration with water treatment Filtration products Silica Sand, Anthracite, Activated Carbon, Birm, Pumice and Garnet in portable water treatment, surface water treatment, swimming pool water treatment, R.O. reverse Osmosis treatment plant and wastewater treatment also in conventional water treatment filters. Filter Gravel is an extremely effective filter media because of its ability to hold back precipitates containing impurities. Filter sand size, angularity and hardness are the important filter sand characteristics to ensure proper filtering. In slow sand filters, the gravel is normally on the bottom layer and is used as channels for filtered water to make it to the outlet lines. Sand will often plug the holes in the outlet pipe and the gravel helps prevent that. The primary role of the gravel in the bio-sand filter is to prevent clogging of the PVC pipe with sand. The first layer is sufficiently deep to cover the inlet to the pipe and should be large enough to keep the openings in the filter bottom free for the flow of water out of the filter, and the upper layer fine enough that the overlying filter sand will not sink into its pores.

Sand and gravel are used for road construction, for mixing with asphalt, as construction fill, and in the production of construction materials like concrete blocks, bricks, and pipes. It is also used to make roofing shingles, used on icy roads in the winter, for railroad ballast, and water filtration. The quarry is often where our gravel and other aggregates are excavated and where rocks such as sandstone and basalt are crushed down to size.

Description

Fluid Systems Gravel and water filter pebble is composed of sub-angular, hard, durable, and dense grains of predominately siliceous material. Extracted from a clean glacial deposit, Fluid Systems Minerals Gravel and Pebbleâ??s physical properties make it among the finest available in the world for water filtration applications. Fluid Systems water filter gravel is washed, kiln dried, and screened to meet exact in g specifications with strict adherence to quality control. Sand and gravel make good water filters because they form permeable layers. When comparing the rate of flow between different filters, it is generally found that the tighter the spaces in the filter, the slower the flow of water. These small spaces cause tiny dirt particles to be trapped in the filter media.

Description
Sand is the most important ingredient for an equestrian surface; however, not every kind of sand is suitable for riding arenas. Quarries across the country will have different names for their sands, and particle size, gradation, mineralogy, and shape will vary. The qualities of your sand will greatly affect the performance of your surface, such as being tight, loose, or just right; soft or hard; and how much dust is produced. Becoming familiar with these characteristics will help you determine a solution for adding additives, improving an existing surface or building a new arena, and maintenance. Be sure to use the recommended specifications and sizes to determine what sand you will need .

Silica sand for horse tracks and equestrian arenas at BMS FACTORIES (Gharbalh industrial company ) 100% natural sand washed, sterilized and heat dried.It is distinguished by its natural color, practicality and high quality. Horse track sand is considered the best sand for its high porosity for rain water drainage, free from dust, impurities and bacteria. We manufacture all sizes of silica sand according to international specifications. silica sand for sports and landscaping at BMS FACTORIES for more information contact us

What type of sand is best for a horse arena?
High-quality equestrian grade silica sand should be sub-angular in grain shape, with a low clay and silt content. These important characteristics help to create a firm and highly stable arena surface, whilst also reducing dust and facilitating effective drainage. Using a silica sand that is not suitable for equestrian use is likely to result in an unsuccessful riding arena surface. Sand with a rounded grain shape is unable to compact sufficiently and creates a manege surface that rides deep; this greatly increases the risk of fatigue and injury to your horse.

How many tons of sand do I need?

For a square or rectangular area: Length in meter x Width in meter x Depth in meter. Take the total in meter cube and multiply by the sand density (Kg/meter cube) and the result would be in Kg. To change the unit to ton, take the result and divide it by 1000 as conversion to ton used in most countries. The result would be estimated amount of tons required.

Make your labels last in a lifetime

With specialization of heavy duty labels, ex Automotive Batteries, rigid material construction and workmanship are distinctive component of Saudi Jamac labels.

Heavy duty Labels are put under extensive test parameters, acid resistance, heat resistance and adhesion/peel test for the purpose of satisfying its intended use. It can withstand harsh automotive under hood and environmental elements and remains intact throughout lifetime of the battery.

Sand blasting sand
Materials which can be Sandblasted:

Sandblasting Process
Glass
Stone
Metals
Wood
Plastics Steel
Brass
Aluminum
Silver
Materials Required for Sandblasting Process:

Abrasive Media grit size 80 grit around 0.007
Sand Produces free silica: cause of silicosis, a lung disease
Aluminum OxideLasts 30-40 X over sand.
Silicon Carbide Lasts at least 40-50X over sand.
Garnet
Glass Beads
Black Magic
Walnut Shells
Plastic Pellets

Description
Sandblasting is also known as abrasive blasting. Basically, it is the operation of forcibly propelling a stream of abrasive material against a surface. The sandblasting operation is done under high pressure to smooth a rough surface, roughen a smooth/Shape the surface to remove its contaminants. There are several variants of sandblasting process like bead blasting, Soda blasting and shot blasting. Before sandblasting, it is mandatory to know about its materials and the pros and cons. If your job profile is related to sandblasting or you owned a company that involved in the same process, you need to stay with us. In this article, we will discuss sand blasting machines materials and its pros and corns. But before it, let me also clear some of the details of its operation.

There are Two Types of Sandblasting Processes:

Water-Driven It is applied for reducing surface deterioration, most commonly water driven process is used for brick or concrete surfaces preparation.

Air-Driven This process is best suited for metal surfaces, to prevent moisture buildup and avoid water intrusion in the surface.

Sandblasting is the process of propelling abrasive by using the pressurized liquid or compressed gas as propellant. There are many generic terms for this process that is generally related to the sandblasting abrasive media used for this process. Here are the details of abrasive materials.

Description
Industrial Raw Quicklime Mineral also known as calcium oxide CaO is a term commonly applied to several related materials. Pure lime is calcium oxide CaO formed by burning a form of calcium carbonate such as limestone or marble CaCO3. Calcium oxide is a key ingredient for the process of making cement. As a cheap and widely available alkali. About 50% of the total quicklime production is converted to calcium hydroxide before use. Both quick- and hydrated lime are used in the treatment of drinking water. Quicklime is used as Industrial Raw Materials with other industrial raw material products such as Silica Flour, Limestone, Aggregate, Talc, Volcanic Rock, Abrasives and Calcium Carbonate.

The quicklime products are often ground into a fine powder referred to as PULVERIZED QUICKLIME that is ideal for mixing with additives or other materials to result in specialized blended composites. Due to the chemical nature of some additives, the quicklime can become Fluidized, that is, having properties of being highly fluid. The fluidized quicklime is ideal for use with special material handling systems for optimum flowability and to avoid clogging. Quicklime can also be hydrated with water, in a process commonly referred to as slaking, resulting in HYDRATED QUICKLIME (or calcium hydroxide), a dry free-flowing powder product that is practical and efficient for many uses.

The relationship of quicklime and hydrated lime The word lime is also used to refer to calcium hydroxide and its chemical formula is Ca (OH) 2, and it is formed by the reaction of calcium oxide also with water. Calcium hydroxide is also known as hydrated lime, or hydrogenated lime while calcium oxide is known as quicklime. Both articles are rules.

There are a wide variety of uses for hydrated lime. It uses an auxiliary material for smelting in the production of iron. It is also used to purify aluminum, copper, and zinc, and remove the hardness of water by removing certain minerals from them. It also plays an important role in wastewater treatment. And we find many farmers spread lime in their fields to neutralize soil acidity. Homeowners also use it in their gardens to prevent algae growth. Lime helps hold soil in foundations of roads and runways. In the leather industry, it is used in tanneries to remove hair from animal hides. The mortar that is placed between the tiles or stones in the walls of buildings consists of a mixture of lime, sand, and water. It is also one of the most important components of gypsum, and one of the most important components of a type of cement called Portland cement.

All Products that Made in Saudi Arabia

PSCF also produces necessary chemicals for construction, including Styrene Acrylic, Pure acrylic, and Vinyl acetate Homopolymer

Yarn (baler twine), (pp), spool 10", 311m/kg, hay, blue, 4.7m/kg

Yarn (commercial twine), (pp), spool 10", 1000m/kg, fine, white or black, 1.8kg/spool, 1800m/spool

Yarn (baler twine), (pp), spool 10", 132m/kg, heston, blue, 7.5 kg/spool, 990m/spool

Material: HDPE (High Density Polyethylene)
Grade: Blown Film
Melt Flow Index: 0.3 to 0.5 g/10min
Density: 0.951 g/cm3
Packing: Jumbo Bags on Pallets
Loading Port: Jeddah, Saudi Arabia
Loading Capacity: 25 to 28 TONS
Origin: Saudi Petrochemical Industry

PET (Polyethylene Terephthalate)

Fruit & vegetable tubular sleeve, roll, 54cm wide, 4.80gm/lm, red, 1500lm/roll

Description
Industrial Raw Materials are used for buffing, sanding, grinding, or polishing with other products such as Silica Flour, Limestone, Aggregate, Quicklime, Talc, Volcanic Rock and Calcium Carbonate. An abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. As long as the abrasive itself is harder than the material you are trying to finish, an abrasive will be a very effective way of honing down any material to prepare it for use. Industrial Raw Materials Abrasives consist of minerals that can be either naturally-occurring or synthetic, such as calcite, emery, pumice, sandstone, garnet, borazon, ceramic, steel abrasive, and silicon carbide. When used for industrial applications such as mining, construction, railroad, and wholesale/retail operations, usage falls into several different categories: bonded, coated and others. A grinding wheel is a good example of a bonded abrasive, operated at very high speed to finish any material which is pressed against it. Sandpaper is the most commonly used coated abrasive, and is affixed to a backing material, such as paper or metal.

While sandblasting a stream of Industrial Raw Materials Abrasives is thrown out on the surface of the workpiece to make it smooth or to remove the contaminants from the surface. Apart from this, these are used in automotive paints. Calcium carbonate is also an Abrasive that is used in toothpaste. In this particular application, hardness of the Abrasive is more than that of the contaminating agent but less than that of the tooth enamel. This helps in removing the bacterial plague without damaging the tooth enamel. Abrasives are also used in the processing of jewelry pieces.

Slack wax is used in emulsions, construction board, matches, candles, rust protective products and moisture vapor barriers, polishes, inks, carbon paper and externally can be applied as good dust suppressants or controlled-release agents for various chemical and fertilizers.

What is the main use of bitumen?. The primary use (70%) of asphalt is in road construction, where it is used as the glue or binder mixed with aggregate particles to create asphalt concrete. Its other main uses are for bituminous waterproofing products, including production of roofing felt and for sealing flat roofs

PVC Granules

Polyvinyl chloride is used in construction of pipe and in profile applications such as doors and windows. It is also used for bottles, other non-food packaging, and cards.

We are a trustworthy and well known supplier of PVC granules of virgin/prime, off grade, off spec and recycled quality.

Clinker

Marked Orbit Estate is also one of the Cement Dealer and International Clinker Supplier according to Customer Requested Grade.

Product origin : Saudi Arabia

We Provide Cement and Clinker to the Customers with Land Transportation with in the Kingdom and also Export Clinker to Middle East, ASIA and AFRICA. For this purpose, we have many agreements with different Cement Factories for huge Stock (Clinker) Availability on priority basis.

Minimum Order Size and Packgaing details :
MOQ: 20000 Ton

Concrete Admixtures
Waterproofing Membranes
Adhesives, Sealers, Toppings & Coatings

Pp. Of grade