Find Verified Construction Chemicals Suppliers, Manufacturers and Wholesalers

Epoxy putty is a High build stiff compound based on a selected epoxy resin and forms a two component product with a suitable catalyst. It forms a near rock hard product upon curing and is used to stop to fill cracks, indentations, blow holes, holes resulting out of construction flaws and damages due to mechanical abuse. By virtue of the epoxy resin composition it exhibits excellent resistance to mild acids, bases and other chemicals. It is very easy to apply
and can accept top coats for cosmetic as well as protective nature.

Epoxy Primer is a High build top coat based on a high molecular weight epoxy resin and zinc phosphate pigment and forms a two component primer with a suitable catalyst. By virtue of the epoxy resin it has excellent resistance to mild acids, bases and other chemicals.
It achieves good build up in one single application. It has outstanding anti-corrosive properties and has a good abrasion resistance

Polyurethane Coating is two component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion.

PROPERTIES
Colour : Full spectrum

Solids: 50 +/- 2 %

Theoretical Coverage 10 - 11 m2/lit

DRYING TIME : AT 25 C
To handle: 3 hours

To Recoat: 5 hours

Flash point: 27C

Specific gravity: 1.10 �±0.05

Pot life: 6 hours

Mixing ratio: 4 parts base "A" :1 part hardner "B"

Solvent: Polyurethane thinner.

High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.

Its internal pipe in white EPDM is non-toxic, anti-odour and does not pass on any taste. Its coating is resistant to external aggressions such as abrasion, ozone and atmospheric agents. The inside of the hose is reinforced with two textile braids and one metal coil. It complies with European and FDA

Construction:

Inner Tube:White,Smooth Food Grade Rubber.

Reinforcement: High tensile textile cord with steel wire helix spiraled.

Cover:High tensile synthetic abrasion and weather resistant rubber, Colorful wrapped flat surface or corrugation surface

Working Pressure:Constant Pressure 20Bar /300 psi

Temperature Range:-20 +80 (-4 F 176 F)

Application: FDA approved food grade hose designed to suction and discharge of fatty good such as milk, edible oil and other daily products, etc.

Hoses used for food-related applications must be manufactured from particular materials that are suitable for contact with food products. We offer a full product line of high-quality, food-grade hoses that are designed specifically for use in food transfer and processing applications. With food transfer applications, it is important to use high-quality hoses that meet the necessary criteria to be deemed food-safe. The PVC or rubber material of the hose is specifically formulated to withstand the food processing environment, including exposure to sanitizing agents and frequent cleaning procedures. Food hoses are also designed to tolerate the rough handling conditions and high temperatures often encountered in such applications. Chemical resistance.Foods and beverages can react unfavorably with certain types of materials, resulting in the production of hazardous chemicals and acids that may affect the safety and quality of the product. For this reason, food-grade hoses are fabricated from non-toxic materials that resist these types of reactions. To preserve the integrity and taste of food products, food-grade hoses are made from tasteless and odorless materials.

Feature:

Mandrel extrusion technology

Free OEM Color & Brand Service

Packing as customer request

Its internal pipe in white EPDM is non-toxic, anti-odour and does not pass on any taste. Its coating is resistant to external aggressions such as abrasion, ozone and atmospheric agents. The inside of the hose is reinforced with two textile braids and one metal coil. It complies with European and FDA

Construction:

Inner Tube:White,Smooth Food Grade Rubber.

Reinforcement: High tensile textile cord with steel wire helix spiraled.

Cover:High tensile synthetic abrasion and weather resistant rubber, Colorful wrapped flat surface or corrugation surface

Working Pressure:Constant Pressure 16Bar /230 psi

Temperature Range:-20â 80 (-4 F 176 F)

Application: FDA approved food grade hose designed to suction and discharge of fatty good such as milk, edible oil and other daily products, etc.

Hoses used for food-related applications must be manufactured from particular materials that are suitable for contact with food products. We offer a full product line of high-quality, food-grade hoses that are designed specifically for use in food transfer and processing applications. With food transfer applications, it is important to use high-quality hoses that meet the necessary criteria to be deemed food-safe. The PVC or rubber material of the hose is specifically formulated to withstand the food processing environment, including exposure to sanitizing agents and frequent cleaning procedures. Food hoses are also designed to tolerate the rough handling conditions and high temperatures often encountered in such applications. Chemical resistance.Foods and beverages can react unfavorably with certain types of materials, resulting in the production of hazardous chemicals and acids that may affect the safety and quality of the product. For this reason, food-grade hoses are fabricated from non-toxic materials that resist these types of reactions. To preserve the integrity and taste of food products, food-grade hoses are made from tasteless and odorless materials.

Feature:

Mandrel extrusion technology

Free OEM Color & Brand Service

Packing as customer request

Its internal pipe in white EPDM is non-toxic, anti-odour and does not pass on any taste. Its coating is resistant to external aggressions such as abrasion, ozone and atmospheric agents. The inside of the hose is reinforced with two textile braids and one metal coil. It complies with European and FDA

Construction:

Inner Tube:White,Smooth Food Grade Rubber.

Reinforcement: High tensile textile cord with steel wire helix spiraled.

Cover:High tensile synthetic abrasion and weather resistant rubber, Colorful wrapped flat surface or corrugation surface

Working Pressure:Constant Pressure 10Bar /150 psi

Temperature Range:-20+80 (-4F 176 F)

Application: FDA approved food grade hose designed to suction and discharge of fatty good such as milk, edible oil and other daily products, etc.

Hoses used for food-related applications must be manufactured from particular materials that are suitable for contact with food products. We offer a full product line of high-quality, food-grade hoses that are designed specifically for use in food transfer and processing applications. With food transfer applications, it is important to use high-quality hoses that meet the necessary criteria to be deemed food-safe. The PVC or rubber material of the hose is specifically formulated to withstand the food processing environment, including exposure to sanitizing agents and frequent cleaning procedures. Food hoses are also designed to tolerate the rough handling conditions and high temperatures often encountered in such applications. Chemical resistance.Foods and beverages can react unfavorably with certain types of materials, resulting in the production of hazardous chemicals and acids that may affect the safety and quality of the product. For this reason, food-grade hoses are fabricated from non-toxic materials that resist these types of reactions. To preserve the integrity and taste of food products, food-grade hoses are made from tasteless and odorless materials.

Feature:

Mandrel extrusion technology

Free OEM Color & Brand Service

Packing as customer request

Its internal pipe in white EPDM is non-toxic, anti-odour and does not pass on any taste. Its coating is resistant to external aggressions such as abrasion, ozone and atmospheric agents. The inside of the hose is reinforced with two textile braids and one metal coil. It complies with European and FDA

Construction:

Inner Tube:White,Smooth Food Grade Rubber.

Reinforcement: High tensile textile cord.

Cover:High tensile synthetic abrasion and weather resistant rubber, Colorful wrapped flat surface or corrugation surface

Working Pressure: Constant Pressure 16Bar /230 psi

Temperature Range:-20+80 (-4 F 176 F)

Application: FDA approved food grade hose designed to delivery fatty good such as milk, edible oil and other daily products, etc.

Hoses used for food-related applications must be manufactured from particular materials that are suitable for contact with food products. We offer a full product line of high-quality, food-grade hoses that are designed specifically for use in food transfer and processing applications. With food transfer applications, it is important to use high-quality hoses that meet the necessary criteria to be deemed food-safe. The PVC or rubber material of the hose is specifically formulated to withstand the food processing environment, including exposure to sanitizing agents and frequent cleaning procedures. Food hoses are also designed to tolerate the rough handling conditions and high temperatures often encountered in such applications. Chemical resistance.Foods and beverages can react unfavorably with certain types of materials, resulting in the production of hazardous chemicals and acids that may affect the safety and quality of the product. For this reason, food-grade hoses are fabricated from non-toxic materials that resist these types of reactions. To preserve the integrity and taste of food products, food-grade hoses are made from tasteless and odorless materials.

Feature:

Mandrel extrusion technology

Free OEM Color & Brand Service

Packing as customer request

Its internal pipe in white EPDM is non-toxic, anti-odour and does not pass on any taste. Its coating is resistant to external aggressions such as abrasion, ozone and atmospheric agents. The inside of the hose is reinforced with two textile braids and one metal coil. It complies with European and FDA

Construction:

Inner Tube:White,Smooth Food Grade Rubber.

Reinforcement: High tensile textile cord.

Cover:High tensile synthetic abrasion and weather resistant rubber, Colorful wrapped flat surface or corrugation surface

Working Pressure:Constant Pressure 10Bar /150 psi

Temperature Range:-20+80 (-4 F176 F)

Application: FDA approved food grade hose designed to delivery fatty good such as milk, edible oil and other daily products, etc.

Hoses used for food-related applications must be manufactured from particular materials that are suitable for contact with food products. We offer a full product line of high-quality, food-grade hoses that are designed specifically for use in food transfer and processing applications. With food transfer applications, it is important to use high-quality hoses that meet the necessary criteria to be deemed food-safe. The PVC or rubber material of the hose is specifically formulated to withstand the food processing environment, including exposure to sanitizing agents and frequent cleaning procedures. Food hoses are also designed to tolerate the rough handling conditions and high temperatures often encountered in such applications. Chemical resistance.Foods and beverages can react unfavorably with certain types of materials, resulting in the production of hazardous chemicals and acids that may affect the safety and quality of the product. For this reason, food-grade hoses are fabricated from non-toxic materials that resist these types of reactions. To preserve the integrity and taste of food products, food-grade hoses are made from tasteless and odorless materials.

Feature:

Mandrel extrusion technology

Free OEM Color & Brand Service

Packing as customer request

Cleans
Lifts and traps soils for easy rinse off
Contains no bleach
Formulated to weaken soils ability to cling to surfaces

Degreases
Heavy-duty non-solvent based degreaser
VOC compliant in all 50 states
No petroleum or chlorinated solvents

Disinfects
Kills 99.9% germs in 10 seconds
Kills viruses in 30 seconds
Kills bacteria in 45 seconds

Controls Mold And Mildew
Removes mold and mildew stains
Prevents mold growth for 7 days