Please click here to check who's online and chat with them.

Find Verified Coated Fabrics Suppliers, Manufacturers and Wholesalers

Oct-19-16

Coated Fabric

MOQ: Not Specified
Supplier From Seoul, South Korea (Republic Of Korea)
 Inquire Now  
Fiberglass fabrics in order to meet special purpose or to increase some idiosyncrasy, these fabrics can be treated in various ways. With different temperature resistance and special properties, they are applied in a wide range of different work condition and industrial fields.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
155794 Coated Fabrics Suppliers
Short on time? Let Coated Fabrics sellers contact you.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
May-17-19

Coated Fabrics

MOQ: Not Specified
Sample Available
 Inquire Now  
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant.

Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations.

ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Nov-11-23
 Inquire Now  
PVC coated tarpaulin fabric, is produced by 100% polyester fabric, double side coated with high quality PVC raw material, to make the vinyl coated fabrics have good waterproofing and all level blockout characters, at the same time, for the application of polyester fabric, it gives good tearing and breaking strength to the PVC coated fabric. It can be produced in different weight and thicknesses, to meet customer requirement.

What is� PVC coated fabric?

PVC coated tarpaulin fabric, is produced by 100% polyester fabric, double side coated with high quality PVC raw material, to make the� vinyl coated fabrics� have good waterproofing and all level blockout characters, at the same time, for the application of polyester fabric, it gives good tearing and breaking strength to the� PVC coated fabric. It can be produced in different weight and thicknesses, to meet customer requirement.


Production process of� PVC tarpaulin fabric:

There are several types of production of� PVC coated fabric material:


Knife coated PVC fabric:

It is liquid PVC spread on high density woven polyester fabric, with a knife above the fabric, keep the top of fabric with same thickness PVC coated, then going to heater and cooler process to solidate the PVC onto polyester fabric.
Main advantages and disadvantages: Higher peeling strength because the liquid PVC has more falling into polyester fabric; at the same time, as the high temperature of the PVC during heating process, the fabric would be a little fragile and it is a little less tearing strength compared to other production process.


Hot melt coated PVC fabric:

It is polyester fabric and PVC film laminated together, during the process, PVC film and the polyester fabric are brushed with strong glue to adhere together, and before laminating, PVC film is heated to semi-melted status, in this case, the peeling strength is strengthened while it has more air tightness compared to knife coating PVC fabric, it is ideal products for inflatables.


Hot laminated PVC fabric:

Hot lamination is a knitted polyester fabric laminated with PVC film under temperature 100-120â??. It is used for temporary tents and awnings.
Sep-13-19
Supplier From Valsad, Gujarat, India
 Inquire Now  
Product Description :
Taffeta Polyester Woven PU Coated Fabric for BAG

Price of product ( USD price or FOB price) :
USD 1.5 to USD 2 Per Mtrs

Product origin :
Vapi, Gujarat, India

Key Specifications/Special Features :
100% Polyester Woven PU Coated Fabric for Bag , Available in Various Colors Fabric width 58 to 60" Roll of 50 Mtrs, Comes With Water Repattant Finish Place Of Origin, Vapi, Gujarat, Port Of Loading Nahva Seva Port, Payment Terms TT advance or LC, Delivery Time Depends upon the quantity.

Minimum Order Size and Packgaing details :
Roll Of 50 Mtrs as per requirement MOQ= 1000 Mtrs per Color
Sep-13-19
Supplier From Valsad, Gujarat, India
 Inquire Now  
Product Description :
Gucci Weave Polyester Woven PU Coated Fabric for BAG

Price of product ( USD price or FOB price) :
USD 2 to USD 3 Per Mtrs

Product origin :
Vapi, Gujarat, India

Key Specifications/Special Features :
100% Polyester Woven PU Coated Fabric for Bag , Available in Various Colors Fabric width 58 to 60" Roll of 50 Mtrs, Comes With Water Repattant Finish Place Of Origin, Vapi, Gujarat, Port Of Loading Nahva Seva Port, Payment Terms TT advance or LC, Delivery Time Depends upon the quantity.

Minimum Order Size and Packgaing details :
Roll Of 50 Mtrs as per requirement MOQ= 1000 Mtrs per Color
Sep-13-19
Supplier From Valsad, Gujarat, India
 Inquire Now  
Product Description :
Diamond Weave Polyester Woven PU Coated Fabric for BAG

Price of product ( USD price or FOB price) :
USD 2 to USD 3 Per Mtrs

Product origin :
Vapi, Gujarat, India

Key Specifications/Special Features :
100% Polyester Woven PU Coated Fabric for Bag , Available in Various Colors Fabric width 58 to 60" Roll of 50 Mtrs, Comes With Water Repattant Finish Place Of Origin, Vapi, Gujarat, Port Of Loading Nahva Seva Port, Payment Terms TT advance or LC, Delivery Time Depends upon the quantity.

Minimum Order Size and Packgaing details :
Roll Of 50 Mtrs as per requirement MOQ= 1000 Mtrs per Color
Sep-13-19
Supplier From Valsad, Gujarat, India
 Inquire Now  
Product Description :
Hexagon Weave Polyester Woven, PVC Coated Fabric for BAG

Price of product ( USD price or FOB price) :
USD 2 to USD 3 Per Mtrs

Product origin :
Vapi, Gujarat, India

Key Specifications/Special Features :
100% Polyester Woven PVC Coated Fabric for Bag , Available in Various Colors Fabric width 58 to 60" Roll of 50 Mtrs, Comes With Water Repattant Finish Place Of Origin, Vapi, Gujarat, Port Of Loading Nahva Seva Port, Payment Terms TT advance or LC, Delivery Time Depends upon the quantity.

Minimum Order Size and Packgaing details :
Roll Of 50 Mtrs as per requirement MOQ= 1000 Mtrs per Color
Sep-13-19
Supplier From Valsad, Gujarat, India
 Inquire Now  
Product Description :
Matt Weave Polyester Woven PU Coated Fabric for BAG

Price of product ( USD price or FOB price) :
USD 2 to USD 3 Per Mtrs

Product origin :
Vapi, Gujarat, India

Key Specifications/Special Features :
100% Polyester Woven PU Coated Fabric for Bag , Available in Various Colors Fabric width 58 to 60" Roll of 50 Mtrs, Comes With Water Repattant Finish Place Of Origin, Vapi, Gujarat, Port Of Loading Nahva Seva Port, Payment Terms TT advance or LC, Delivery Time Depends upon the quantity.

Minimum Order Size and Packgaing details :
Roll Of 50 Mtrs as per requirement MOQ= 1000 Mtrs per Color
Sep-13-19
Supplier From Valsad, Gujarat, India
 Inquire Now  
Product Description :
Polyester Fabric with 2 Pass and 3 Pass Blackout Coating

Price of product ( USD price or FOB price) :
USD 2 to USD 6 Per Mtrs

Product origin :
Vapi, Gujarat, India

Key Specifications/Special Features :
Polyester Woven Fabric with @pass and 3 Pass Blackout Coating , Available in Various Colors and Weight , Fabric width 54 and 108 " as per requirement Roll of 50 Mtrs, .... Place Of Origin, Vapi, Gujarat, Port Of Loading Nahva Seva Port, Payment Terms TT advance or LC, Delivery Time Depends upon the quantity.

Minimum Order Size and Packgaing details :
MOQ= 1000 Mtrs Per Color
GOLD Member
VERIFIED
Aug-31-23
Supplier From New Delhi, Delhi, India
 Inquire Now  
Coated Foil
GOLD Member
May-28-26

Chef Coats, A

MOQ: Not Specified
Supplier From Hyderabad, Telangana, India
 Inquire Now  
Our chef coats are designed to combine professionalism, comfort, and functionality, making them ideal for chefs working in hotels, restaurants, and catering services. Crafted from high-quality, breathable, and durable fabrics, they ensure comfort during long working hours in hot kitchen environments. The design provides a neat, professional appearance with strong stitching for long-lasting use.

We also offer customization in fabric, color, size, and branding, such as logo embroidery, as per client requirements. With strict quality control and attention to detail, our chef coats ensure hygiene, durability, and complete customer satisfaction.
GOLD Member
Jan-01-24
 Inquire Now  
Various woven fabrics with classic and modern designs, such as cotton, linen, woolen, polyester, bamboo fiber, silk, tencel, etc.
GOLD Member
May-30-26
Supplier From Bhilwara, Rajasthan, India
 Inquire Now  
Fabric Processing

Processing Capacity: 121 Million Meters Per Annum

Primarily focused on dyeing and processing our own fabric, we are equipped with state-of-the-art machinery, making us one of the most modern fabric processing facilities.

We are a leading fabric manufacturer, producing high-quality textiles with a perfect blend of durability, aesthetics and sustainability. With cutting-edge technology and eco-friendly practices, we deliver premium fabrics that meet global standards.
GOLD Member
Mar-16-26

Fabrics, Premium Quality

$8.75 - $175.86 / Meter (FOB)
MOQ: 500  Meters
Sample Available
 Inquire Now  
Premium Quality Fabrics, Available in any quantity.

Sample Specifications Just for Reference.
_____________________________________
90GSM PP Polyester
140GSM PP Polyester
160GSM Selina
160GSM Dot Knit
160GSM Honeycomb
100% Cotton Bio washed, 25s Count, RL Yarn, 180GSM
100% Cotton Single Tex 240GSM
OE Polycotton 180GSM
OE Polycotton 220GSM
OE Fleece 280GSM
100% Cotton Fleece 280GSM, Cotton Bio washed
50S RL Interlock
40s 20Dr RL Lycra Jersey
25s 40% Poly 60% Cot Airtex ST/DT
25s 40% Poly 60% Cot Single Jersey
25s 40% Poly 60% Cot Loopknit UnRaise
Mars Dri fit 200GSM
2 way Lycra 180GSM
4way (Nike) Lycra 220GSM
-------------------------------------
Cost eg - The Basic cotton can cost be determined depending on the GSM and printing.

Country of Origin - India
Port of Loading - Cochin & Chennai Ports.
All Products are certified and are quality oriented.
Dec-29-08

Oxford Fabric Pvc Coated

MOQ: 2000  Liters
Sample Available
 Inquire Now  
Features:

1). Composition: polyester PVC
2). Construction: 600D x 600D
3). Width: 57 / 58"
4). Weight: 390gsm (5gsm more or less)
5). Finishing: 0.50mm PVC coating
6). Suitable for beach seats, bags, cases, suitcases, luggage, suitcase, backpack and tents
Sep-15-20

Sms Fabric Lab Coat

$10
MOQ: Not Specified
 Inquire Now  
KMNPack SMS Lab Coat gown is made from fluid-resistant PP fabric material, which offer an optimal mix of protection and comfort. This material is strong,fluid-resistant and breathable.
GOLD Member
Sep-29-25

Zinc Coated Urea, zinc urea

$1 - $200 / Metric Ton (FOB)
MOQ: 100  Metric Tonnes
Sample Available
Supplier From Dubai, Um Rammol, United Arab Emirates
 Inquire Now  
Zinc Coated Urea - Power Your Crops with Essential Nutrition
Designed to combat zinc deficiency in all soil types, Zinc Coated Urea delivers zinc in a highly available form, ensuring your plants absorb the nutrients they need for stronger growth and higher yields. Its advanced formulation also prevents nutrient loss through precipitation, keeping your crops healthy and productive.
Boost Growth with Zinc-Enriched Urea
Tackle zinc deficiency while enhancing your crops nutrient uptake! Zinc-enriched urea works hand-in-hand with nitrogen to promote stronger, healthier plants. Perfect for all soil types, application methods, and a wide variety of crops under any environmental condition, it helps you achieve consistent, high yields.
GOLD Member
Mar-06-19
Supplier From Gyeongju-su, Gyeongsangbuk-do, South Korea (Republic Of Korea)
 Inquire Now  
-Quality: Grade A
-Width: Mainly 1,020mm
-Thickness: 0.20mm
-Length: About 100 Meter/roll
-Usage: Pocket Diary, Desk Diary, Book Cover, Album,
Binder, Gift Box, Jewelry & Watch Box etc.

Product origin : Korea

Minimum Order Size and Packgaing details :
" -Stuffing Qty: About 100,000 Meter/20’cntr
GOLD Member
Aug-30-23
 Inquire Now  
Cast coated board is a high-gloss, smooth paper with a superior printing finish.
It is ideal for use in a variety of applications, including packaging, labels, and advertising.
Our cast coated board is made from high-quality materials and is backed by our satisfaction guarantee.
Contact us today to learn more about our cast coated board and how it can help you with your next project.
GOLD Member
Aug-29-23
 Inquire Now  
Our cast coated paper is a high-quality, glossy paper that is perfect for printing photographs, brochures, and other marketing materials.
It has a smooth, even surface that ensures sharp images and vibrant colors.
GOLD Member
VERIFIED
Apr-24-24
Supplier From Sidoarjo, Jawa Timur, Indonesia
 Inquire Now  
Fabric & Textile products is still needed throughout the world, it can have significant impact on price increases.
We provide this Fabric & Textile on an ongoing basis and can serve exports to your country.

With quality packaging and production processes, making the products we sell have selling points that are not only economical but also safe.

With our full support we help you become an importer of the products we sell.

We, Nif International, hope to be the best export-import partner for you around the world.
GOLD Member
VERIFIED
Apr-21-22

Garments Fabric, Fresh

$0.90 - $10 / Meter (FOB)
MOQ: 5000  Meters
Sample Available
 Inquire Now  
Fabric available- 100% cotton, 100% Linen, Poly cotton, Viscose, Satin, Rayon Twill etc.
Width- 36-58"
Design- Printed, Plain, checks etc.
Price- $0.8-$3/- FOB New Delhi or as per quality.
We shall be glad to serve you.
Bulk qty only.
GOLD Member
VERIFIED
Jan-18-23

Shirting Fabrics, Fresh

$0.90 - $10 / Meter (FOB)
MOQ: 5000  Meters
Sample Available
Supplier From New Delhi, Delhi, India
 Inquire Now  
Shirting fabric

Fabric- Cotton, poly cotton, twill, Lycra, satin etc
Printed, check, plain
Width- 36&58"
Length- 100CMs
GOLD Member
VERIFIED
Jan-18-23

Shirting Fabrics, Fresh

$0.90 - $10 / Meter (FOB)
MOQ: 5000  Meters
Sample Available
Supplier From New Delhi, Delhi, India
 Inquire Now  
Shirting fabric

Fabric- Cotton, poly cotton, twill, Lycra, satin etc
Printed, check, plain
Width- 36&58"
Length- 100CMs
GOLD Member
VERIFIED
Sep-03-20
 Inquire Now  
* In various GSM, Colors and Widths.

* SMMS fabric also available.
GOLD Member
VERIFIED
Sep-03-20
 Inquire Now  
* Raw material: 100% Polypropylene

* In various GSM, Widths and Colors
GOLD Member
Feb-03-26

Sofa Fabric, Premium

$1.55 - $1.56 / Meter (FOB)
MOQ: 1000  Meters
Supplier From KWAI CHUNG, Hong Kong, Hong Kong
 Inquire Now  
ITEM: Sofa Fabric
WEIGHT: 200G/SQM
Price: FOB SHANGHAI US$1.55

MOQ is 1,000 MT for each color

All are MADE IN CHINA

Packed in a roll
GOLD Member
Jul-24-25

Adras Fabric, 1st

$1 - $5 / Meter (FOB)
MOQ: 1000 meters  Meters
Sample Available
Supplier From Tashkent, Uzbekistan
 Inquire Now  
The ancient cities of Central Asia, along which the Silk Road passed, have always been famous for the production of exquisite fabrics. The centers of Uzbek weaving were and remain Bukhara, Margilan, Namangan, Kokand and others. Today, these places are famous for the beauty of hand-made silk not only throughout the country, but throughout the world. Centuries-old traditions of hand-made silk and cotton fabrics have been an integral part of national clothing, culture and interior design.

A special place is occupied by traditional fabrics made according to an ancient technology, which is called â??ikatâ?? in the West. The name comes from the Indonesian verb "mengikat" which means "to bind". This sophisticated weaving technique is performed entirely by hand and consists in the fact that the threads of the fabric are tied into bundles and dyed in certain colors. Then, when the fabric is woven, a pattern is drawn on it. In Uzbekistan, this technique is called "abrband", which means - a tied cloud.

There are several legends associated with the emergence of this weaving technique. According to one legend, once an artist was sitting on the bank of the river. The sky and clouds reflected in the river. The artist drew attention to the play of colors shimmering on the water surface and how the current changed the shape of the clouds. He sketched all this and showed it to the weavers, who tried to reproduce it on the fabric. Later, the word "abr" (which translates as "cloud") began to be used in the designation of the style of thread dyeing in traditional fabrics, thus the fabrics began to be called abr, and the weavers were called abrbands.

The silk fabric itself varied in the quality of the silk and in its composition. A fabric made from pure silk is called shoi, satin, podshohi. And the fabric made of cotton and silk is called adras, bekasab, pasma, banoras.

Abr patterns were distinguished by their diversity. Each school of silk weaving was famous for its artistic ornament. Each pattern was named after the shape it resembled. The most common were: tumorcha (amulet), tarok (comb), gajak (decoration), lesson (sickle), bodom (almond), darakht (tree), anor (pomegranate), oy (moon), shoh (horn), nogora (timpani), chakirim (echo), kapalak (butterfly), ilon easy (snake trail), chayon (scorpion), etc.

Modern ikat patterns also often feature traditional Uzbek jewelry, such as teardrop earrings and triangular pendants (tumor). When an Uzbek girl got married, she had to wear the best jewelry that indicated the wealth of her family. It was said that if a girl could not walk under the weight of jewelry, then she was from a very wealthy family. However, decorations were very expensive and without them, the wedding ceremony was considered shameful, so to solve this problem, people began to buy ikat with images of decorations.
GOLD Member
May-07-26

Holland Fabric, Qualified

$0.81 - $1.03 / Meter (FOB)
MOQ: 1000  Meters
Sample Available
Supplier From Haining, Zhejiang, China
 Inquire Now  
1. Composition & Construction

Material: 100% Polyester (Microfiber)

Technique: Warp knitted, brushed, and dyed/printed.

2. Specifications

Weight: 180 - 330 GSM (grams per square meter)

Width: 140 - 300 CM (can be customized)

3. Key Features

Hand Feel: Soft, smooth, and silky touch with a dense pile.

Appearance: Elegant matte finish with good drapability.

Performance: Wear-resistant, non-pilling, colorfast, and dimensionally stable (non-shrinking).

Note: May generate static electricity; avoid heavy folding to prevent creases.

4. Applications

Widely used for sofa covers, upholstery, curtains, cushions, bedding, blankets, toys, and homewear.
Sep-13-19
Supplier From Valsad, Gujarat, India
 Inquire Now  
Product Description :
Comouflage Printed Polyester Woven PU Coated Fabric for Bag & Tent

Price of product ( USD price or FOB price) :
USD 2.5 to USD 4 Per Mtrs

Product origin :
Vapi, Gujarat, India

Key Specifications/Special Features :
100% Polyester Woven PU / PVC Coated Fabric for Bag & Tent , Available in Various Colors Fabric width 58 to 60" Roll of 50 Mtrs, Comes With Water Repattant Finish Place Of Origin, Vapi, Gujarat, Port Of Loading Nahva Seva Port, Payment Terms TT advance or LC, Delivery Time Depends upon the quantity.

Minimum Order Size and Packgaing details :
Roll Of 50 Mtrs as per requirement MOQ= 1000 Mtrs per Color
Sep-13-19
Supplier From Valsad, Gujarat, India
 Inquire Now  
Product Description :
Ribstop Polyester Woven PU Coated Fabric for BAG & TENT

Price of product ( USD price or FOB price) :
USD 3 to USD 5 Per Mtrs

Product origin :
Vapi, Gujarat, India

Key Specifications/Special Features :
100% Polyester Woven PU / PVC Coated Fabric for Bag & Tent , Available in Various Colors Fabric width 58 to 60" Roll of 50 Mtrs, Comes With Water Repattant Finish Place Of Origin, Vapi, Gujarat, Port Of Loading Nahva Seva Port, Payment Terms TT advance or LC, Delivery Time Depends upon the quantity.

Minimum Order Size and Packgaing details :
Roll Of 50 Mtrs as per requirement MOQ= 1000 Mtrs per Color
GOLD Member
Oct-29-22
 Inquire Now  
Product Name: Bamboo Coat Rack

Description: Living Room Solid Wood Coat Rack

Material: Bamboo

Colors: As the picture

Size: Support customization

Feature: Eco-friendly

Shipping: DHL, UPS, Fedex, TNT

Payment: TT, L/C, Paypal
GOLD Member
Oct-29-22
 Inquire Now  
Product Name: Bamboo Coat Rack

Description: Living Room Solid Wood Coat Rack

Material: Bamboo

Colors: As the picture

Size: Support customization

Feature: Eco-friendly

Shipping: DHL, UPS, Fedex, TNT

Payment: TT, L/C, Paypal
GOLD Member
Oct-29-22
 Inquire Now  
Product Name: Bamboo Coat Rack

Description: Living Room Solid Wood Coat Rack

Material: Bamboo

Colors: As the picture

Size: Support customization

Feature: Eco-friendly

Shipping: DHL, UPS, Fedex, TNT

Payment: TT, L/C, Paypal
GOLD Member
Nov-24-22

Pet Rolls With Silicone Coated, Rolls

$375 - $575 / Metric Ton (FOB)
MOQ: 25  Metric Tonnes
Sample Available
Supplier From Singapore, Singapore
 Inquire Now  
Origin: Japan
Code: 20261932BN
Material: PET rolls with silicone coated
Category: PET
Type: rolls with silicone coated
Quantity: 25 Tons
Loading weight: 25 Tons
Specification:
PET rolls with silicone coated
all coated thinly
The deduction of core weigh is 2%

Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?

1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
GOLD Member
Jun-01-26

Abs Roll With Pc Coated, Rolls

$1.00K - $1.20K / Metric Ton (CFR)
MOQ: 25  Metric Tonnes
Sample Available
Supplier From Singapore, Singapore
 Inquire Now  
Origin: Japan
Code: 20261781BN
Material: ABS roll with PC coated
Category: PC
Type: roll with PC coated
Quantity: 25 Tons
Loading weight: 25 Tons
Specification: ABS roll with PC coated

Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?

1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
GOLD Member
Oct-22-25

Pc Coated Regrind Transparent, Coated Regrind

$850 - $1.05K / Metric Ton (CFR)
MOQ: 18  Metric Tonnes
Sample Available
Supplier From Singapore, Singapore
 Inquire Now  
Origin: United States
Code: 2025482LD
Material: PC Coated Regrind Transparent
Category: PC
Type: Coated Regrind
Color: Transparent
Quantity: 18 Tons
Loading weight: 18 Tons
Specification: PC coated regrind transparent from headlights
Available 1 load

Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?

1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
GOLD Member
Sep-30-25

Teak Uv Coating Flooring, A Grade

$45 - $50 / Square Meter (FOB)
MOQ: 20  Feet
Sample Available
Supplier From Surabaya, East Java, Indonesia
 Inquire Now  
Indonesian wooden Teak Flooring TNG 4 Sides UV Coating
Sizes : 15x90x600-1200mm
Specs :
- Uv coating natural color
GOLD Member
Mar-28-19
Supplier From Thane, Maharshtra, India
 Inquire Now  
Chocolate for Ice Cream Coating
GOLD Member
May-09-23

General Long Coat - Garmnex

$10.50
MOQ: 1000  Pieces
Sample Available
Supplier From Kanpur, Uttar Pradesh, India
 Inquire Now  
Industry -
Construction, Physical Works, etc.
Composition -
100% Cotton
Polyester Blends
Nylon Blends
Viscose Blends.
Weight -
200 GSM to 400 GSM.
Size -
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
EN-ISO 13688, EN-ISO 20471, ISO 15797.
155794 Coated Fabrics Suppliers
Short on time? Let Coated Fabrics sellers contact you.
Explore Coated Fabrics related import export discussions