The machine press, dewater, flat and cut natural latex coagulum through five rollers, which is a equipment for making smoke rubber.
Component:
1. motor belt drive unit 2. Machine frame 3.rolling device 4. spray system 5. wheel device
Working Principle:
motor reduce a pair of gear (20:52) through one grade V-belt drive, drive-gear transfers drive to forth pair of lower roller, each roller work together after through gear drive.
Continuous operating mixing machine
Sandychen:
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
it takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
243 Rubber Related Items Suppliers
Short on time? Let Rubber Related Items sellers contact you.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running.
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Banbury Rubber Mixer Machine
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running.
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long.
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
243 Rubber Related Items Suppliers
Short on time? Let Rubber Related Items sellers contact you.
