Find Verified Black Cardamom Powder Suppliers, Manufacturers and Wholesalers

The bandage works on wet, dry, dirty, or corroded pipes - even underwater (fresh or salt water). It is activated by water and cures to form a tough, chemical-resistant wrap.
Non-toxic - contains urethane pre-polymer, not classified as hazardous.
Easy to use - no mixing required. Repaired pipes can return to service in less than 30 minutes

Emergency Pipe Repair Kit with Water Activated Fiberglass Wrap for Pipelines
Technical Data
Material Fiberglass Cloth + Polyurethane Resin
Tensile Strength 400psi
Max.Service Temperature +150�°C
Working Life 3-5 minutes
Initial Set Time 7-10 minutes
Full Mechanical Strength 30-45 minutes

Product Applications
Emergency Pipe Repair Kit with Water Activated Fiberglass Wrap for PipelinesDIRECTION FOR USE

Turn off pressure in pipeline. Abrade the pipe with sandpaper or file and clean the surface. The prepared area should be approximately 3 to 4 times the size of the damaged area.
Knead EPOXY PUTTY until it is a uniform grey colour.
Apply firmly to the damaged area within 2-5 minutes of mixing. It is important to apply the bandage before the putty is cured.
Using gloves, remove bandage from the package. Immerse in temperate water for 4-6 seconds.
Wrap tightly and quickly, using entire roll extend approx. 8 to 10cm above and below the damage area. A strong, tight repair is very important.
Wet gloves in water, squeeze and mold tape in the direction of the wrap until resin stops foaming and is set.
Wait 24 hours for EPOXY PUTTY to full cured.

Application Tips
Clean and rough pipe surface can greatly improve repair firmness.
The bandage will cure once exposed to moisture after opening, please finish operation quickly.
Water temperature affects curing speed: warm water speeds up curing, cold water slows it down. Normal temperature water is recommended.
For high-pressure and large-area damage, use multiple rolls of bandage for reinforcement.
EPOXY PUTTY has a 3-5 minute work life, with a functional cure in 24 hours.
EPOXY PUTTY mixed thoroughly is critical to the performance of the repair.

APPLICATION SCENARIOS
Emergency leak repair for petrochemical pipelines
Reinforcement of corroded or damaged pipes
Repair under water or in humid environments
Industrial, marine, engineering and chemical industry applications
Permanent reinforcement for pressure shut-down repair cases
Emergency Pipe Repair Kit with Water Activated Fiberglass Wrap for PipelinesEmergency Pipe Repair Kit with Water Activated Fiberglass Wrap for Pipelines