NameDescriptions Package
Gf-gl-35w-590s3"1) light source: 590pcs 3528leds
2) luminous flux: 4400lm¡à10%
3) epistar led chip(90~100lm/led)
4) rated wattage: 38w¡à10%
5) base: e40 e39 e27 e26
6) rated voltage: 100~300vac, 50/60hz
7) color temperature: ww(2700~3800k), nw(4000-5000k) or cw(5500-6700k)""8) beam angle: 360 ¡ã
9) lifetime: 50, 000hours
10) size: dia128*180mm
11) net weight: 0.42kg /pcs
12) ce , rohs approved
13) body temperature: < 70¡ã
14) 24vdcì«ñô4vdc for solar power system is available
15) recommended replaced panel light£º105w cfl ""18pcs/ctn
G.W.:11 kg
Meas:54*42*40cm "
Price for 1~49pcs Price for 50-500pcs Price for 501-1000pcsPrice for over 1000pcs
$61.99 $59.04 $56.23 $53.55
Remark:
1. All the above prices are ex-work price.
2. Payment : t/t 50% deposit and the balance paid completely before the delivery.
Or by paypal, or by wester union.
3. All our led lighting products are with 2 years warranty.
4. Lead time: within 3-5 working days after receipt of payment for samples;
Within 10-20 working days after receipt of payment for
5. Shipment: by courier, by air, by sea .
6.The validity of the above quotation is 30 days.
7.Notice: no need ballast, pls remove the traditional ballast before installation;
Could not be installed in the inside sealed fitting ;
8.Mainly for indoor using, such as factory, high hall, shop, hotel, garage, etc..
9.All the above led lighting products are with ce and rohs certificates.
Input voltage/frequency range
Ac 85~265v/50-60hz; dc 24~48v
Lamp's efficiency (%)
>85%
Color index(cri)
>ra80
Workingtemperature
- 40¡ãc to + 55 ¡ãc
Certificate
Ce & rohs & fcc & iso; (ul with driver)
Workinglife
> 50, 000hrs
Color temperature
2700k~7000k
Iprate
Ip 65
Warranty
2 years for led outdoor flood light 80w
Features:
1. Led outdoor flood light 80w are highly efficient electrical driver design: conversion efficiency up to 95%, power factor up to 95%
2.Advanced heat dissipation technology: improved life-time performance of high brightness
3.Modular design: convenient for assembly and dismounting.
4.Unique optical optimization.
5.Warranty: 2 years
6.High efficiency, energy saving
7.Safe and reliable
8.Long life span, over 50, 000 hours
9.Easy to install
10.No radiation, recyclable, no pollution
11.Good heat dissipation, no start up delay, no stroboscopic light .
Applications:
Led outdoor flood light 80w are widely used in hotels, conference room , factories or offices.Commercial uses, residental orpublic facilities, schools, hospitals and the need for energy-saving lighting, high color rendering index of the place. Subversion 0f the traditional flat led light light-emitting protection, health and other characteristics of brilliant appearance, is the premier office, home, advertising, lighting choice.
Trade terms:
1.Payment:t/t, western union, as the payment
2. Discounts are offered based on order quantities
Warranty
2 years for 36w led flat panel wall light
Features and advantages:
1.Energy saving: low energy consumption design, energy saving around 80%.
2. Quick & simple installation, led panel light is an excellent replacement of conventional lamp.
3.Eco-friendly: light source does not contain the tungsten, mercury and other harmful metals.
4.Safety: constant current power supply, glass parts not easily broken, ensure the safety of the user.No ir & uv light radiation
5.Ultra-thin: only a quarter of the thickness of traditional lamps
6.Beautiful: contracted, fashionable, elegant
7.Certificates: ce certificates & rohs compliance
8.Elegant design by smooth aluminum frame.
9.Nice appearance,
10.Special circuit design, each led work separately, avoilding the single broken influence problem .
11.More than 50000hrs lifespan, small light decline rate. Six hours per day of 20 years life .
12.High weather ability.
13. 36w led flat panel wall light are eco-friendly, no heavy metal and harmful gas.
14.No flicker.
Application:
36w led flat panel wall light are very widely used in indoor lighting, such as at home, school, hotels, commercial buildings, offices, and art galleries, historical buildings, etc
Trade terms:
1.Payment:t/t, western union, as the payment
2. Discounts are offered based on order quantities
Input voltage/frequency range
Ac 85~265v/50-60hz; dc 24~48v
Lamp's efficiency (%)
>85%
Color index(cri)
>ra80
Workingtemperature
- 40¡ãc to + 55 ¡ãc
Certificate
Ce & rohs & fcc & iso; (ul with driver)
Workinglife
> 50, 000hrs
Color temperature
2700k~7000k
Iprate
Ip 65
Warranty
2 years for 72w led street light
Thd
<15%
Features and advantages:
1. Solar street lighting are instant start and flicker free to reduce the eyestrain.
2.Very even light distribution and high uniformity, no glare to eyes.
3.Low power consumption: with the 28w, 56w, 112w, 168w high power led street light, but can replace the 75w, 150w, 250w, 400w high pressure sodium street light directly;
4.Creative modules configuration design: we invented our modules configuration design, you can choose 2, 4, 6 or more modules to suit for different lighting requirements;
5.Long life, up to 50, 000 hours: (working for 10 hours a day, can be used for more than 13 years), is 5-10 times working life than a traditional sodium or mercury lamp;
6.Green and environmental protection: no lead, no mercury, no environmental pollution;
7.Operating temperature range: from 25 celsius degree to 65 celsius degree.
8.The led retrofit kits contain no any mercury or lead.
Application:
Solar street lighting are widely used in road/railway/tunnel lighting, subway lighting, underground areas lighting, square, garden, and so on.
Trade terms:
1.Payment:t/t, western union, as the payment
2. Discounts are offered based on order quantities
3. 2 years warranty
Foam filling in carton paper or wooden box.
119 Electronic Semi Conductor Devices Other Components Suppliers
Short on time? Let Electronic Semi Conductor Devices Other Components sellers contact you.
High efficiency,save energy ,protected environment
• High stability and low ripple, increase light efficiency and decrease light attention
• Meet to safety standard and EMC
• Assure LED stability long lift and light efficiency by constant current
• Passed high ,low temperature and waterproof testing.
• Integrity protection,over loading, over voltage ,over current
• 8Hrs and 100% full load burn-in test.
Product name Hard and Soft LED UV Ink for Epson
Color:Yellow Black Magenta Cyan, White, LC, LM
Volume 1000ML/Bottle
Customization
Customized logo(Min. Order: 1000 Kilograms)
Customized packaging(Min. Order: 1000 Kilograms)
Graphic customization(Min. Order: 1000 Kilograms)
Printhead:Suitable for Epson XP600/TX800/DX5/DX7 I3200-U1 print head
Period of validity 1 year for C M Y K LC LM, 8 months for white UV Ink
Packing Normal Packing Or OEM
Application:Flexible Material: soft PVC, soft plastic shell, flexible mobile phone shell, etc.
Rigid Material: ceramic, wood, glass, PVC, KT board and acrylic, metal, etc.
Delivery time 5-10 working days at sight of payment
Shipment Express
Sea freight
Land freight
Air freight
Testing 100% testing on the machine
There are three kinds of forming methods of ceramic substrate: pressing film, dry pressing and casting forming. The casting process has the highest forming production efficiency, and it is easy to realize continuous production and automation. It can improve product quality, reduce costs and realize mass production. The thickness of the production substrate can be as thin as 10m or less than 1mm. Casting forming is an important step in the practical transformation of aluminum nitride ceramic circuit board, and has an important application prospect.
For a long time, AL2O3 and Beo ceramics have been used in most high power hybrid of IC circuit board materials, but the thermal conductivity and thermal expansion coefficient of AL2O3 substrates do not match with Si. Although Beo has excellent comprehensive performance, its high production cost and high toxicity limit its application and popularization. Therefore, considering the performance, cost and environmental protection, the two can not meet the development and demand of modern electronic power devices.
Aluminum nitride ceramic with excellent comprehensive properties is a new generation of advanced ceramics which has received extensive attention in recent years. It has a wide application prospect in many aspects. Especially, it has the advantages of high thermal conductivity, low dielectric constant, low dielectric loss, excellent electrical insulation, thermal expansion coefficient matching with silicon and non-toxicity, making it an ideal material for high density, high power and high speed integrated circuit boards and packaging substrates.
Backed by rich industry experiences, we are leading Manufacturer and Supplier of Customized Integrated Circuit Board in Wuhan, Hubei, China.
Folysky Technology is dedicated to providing the polishing of advanced materials to surface finishes and supplier quality levels that consistently meet or exceed our customer�¢�?�?s expectations.
Advanced level polishing requires that appropriate abrasive and pre-lapping conditions be used to significantly reduce sub-surface damage. Centerline uses both mechanical and CMP (chemical mechanical process) depending on the customers requirements. We are constantly looking for ways to enhance the processes that we have already established, while maintaining careful process controls and qualifications.
Industry standard materials polished are 99.6% Alumina, 96% Alumina, AlN, BeO, Sapphire, Fused Silica. Centerline polishes virtually any ferrous or non ferrous material.
Centerline Technologies�¢�?�? polishing process controls the surface finish and, combined with our lapping process, assures thickness identity and parallelism, as well as flatness of substrates. Our lapping and polishing processes are custom designed for each type of material and the physical dimensions required
Product features:
The ceramic circuit board has high accuracy and good electrical and thermal properties
2. Ceramic circuit board with high bonding strength and good weldability, can realize blind through hole
3. Ceramic circuit board technology is mature, environmental protection, pollution-free, cost is lower than traditional technology
4., a wide range of applications, single-sided and double-sided three-dimensional ceramic circuit boards can be produced
5. Customized production, without mold opening, short production cycle
6., no organic ingredients, resistant to cosmic radiation, high reliability in aviation and space, long service life.
7. Can carry out high-density assembly, line / pitch (l/s) resolution can reach 20 m, so as to realize the integration and miniaturization of equipment.
8. High frequency loss, it can be used in high frequency circuit.
9. Copper sealing, high reliability.
10. 3d substrate and 3d routing.
1. Ceramic circuit board appearance size is not limited
2., ceramic laser printing, three-dimensional routing
3. Ceramic circuit board without mask, fast response
4. Ceramic circuit board technology is mature, environmental protection, pollution-free
Today ceramics are already widely used as substrates in many microelectronic components and power led packages and more and more they are replacing entire printed circuit boards reducing complexity in design and manufacturing while increasing performance. Examples are chip-on-board (cob) modules, high power circuits, proximity sensors, battery drivers for evs, - .
Ceramics advantages over other printed circuit boards:
Lower expansion coefficient
Good thermal properties
Superior high frequency performance
Lower system cost: reduces test, insertion, assembly
Smaller package size due to integration
Cost effective for dense package due to parallel processing of layers
Hermetic packages possible, 0% water absorption
High ceramic PCB thermal conductivity is probably the leading reason more industries are turning to ceramics in their printed circuit boards and packages, as this material has a clear edge over plastics in this regard. Better CTE matching and hermetic sealing only add to the appeal of these materials. The challenge is that these materials, and the boards your ceramic PCB manufacturer makes from them, are considerably more expensive than materials for traditional printed circuit boards, which can add up significantly over the length of a high-volume job. However, the benefits of ceramic boards and the need for heightened thermal conductivity is so great, any company in a relevant industry that can afford to use ceramic boards will probably do so out of necessity.
While we can have an estimate of the level of thermal conductivity each ceramic board can provide, the final values will vary depending upon the manufacturing process, in addition to grain size and composition. We can offer a range of values that experts seem to agree upon.
Thermal conductivity for one of the most popular, although expensive ceramics â?? aluminum nitride â?? is one that many identify as over 150 W/mK, usually around 180 W/mK. However, studies find values ranging all the way from 80 W/mK to 200 W/mK at room temperature, with values dropping by more than one-third as you approach 100 degrees Celsius. Other thermal ranges we can identify at room temperature include 18-36 W/mK for aluminum oxide, 184 to 300 for beryllium oxide, 15 to 600 for boron nitride and 70-210 for silicon carbide.
Because the variations are so wide, it is difficult to pin down actual thermal conductivity numbers. Your best approach will be to do your own testing, record the values you obtain and use those in your future calculations.
Product parameters
Substrate typealumina ceramics
Substrate material thickness0.5mm
Conducting layercu
Thickness of metal layer35m/35m
Surface preparationheavy silver
Metal single-sided /double sideddouble sided
Copper plated through holeyes
Solder maskyes
Product features
1.High precision, good electrical and thermal properties, high bonding strength of.
2.Good weldability, blind hole through hole can be realized
3.Mature technology, environmental protection, pollution-free, cost is lower than traditional technology.
4. A wide range of applications, single-sided, double-sided three-dimensional ceramic circuit board can be produced.
5. Customized production, without mold opening, short production cycle.
Company profile
Folysky technology (wuhan) co., ltd., is a professional engaged in the plane, three-dimensional inorganic non metal based electronic circuits and electronic components research and development, production, sales as one of the high-tech enterprises, which owns the well-known brand of ceramic circuit substrate -- slitong.
The photosensitive sensor is currently the highest yield, the most widely used sensor, exist in the form of photosensitive resistance, along with the change of light intensity, the resistance value is also relatively change, resulting with the light intensity of the pulse signal.
The structural elements of common cadmium sulphide photosensitive electrode are: electrode / cadmium sulfide / ceramic substrate / wire / resin moisture-proof film, etc.. Ceramic substrates have been widely used in photosensitive resistors.
Product features:
The ceramic circuit board has high accuracy and good electrical and thermal properties
2. Ceramic circuit board with high bonding strength and good weldability, can realize blind through hole
3. Ceramic circuit board technology is mature, environmental protection, pollution-free, cost is lower than traditional technology
4., a wide range of applications, single-sided and double-sided three-dimensional ceramic circuit boards can be produced
5. Customized production, without mold opening, short production cycle
6., no organic ingredients, resistant to cosmic radiation, high reliability in aviation and space, long service life.
7. Can carry out high-density assembly, line / pitch (l/s) resolution can reach 20 m, so as to realize the integration and miniaturization of equipment.
8. High frequency loss, it can be used in high frequency circuit.
9. Copper sealing, high reliability.
10. 3d substrate and 3d routing.
1. Ceramic circuit board appearance size is not limited
2., ceramic laser printing, three-dimensional routing
3. Ceramic circuit board without mask, fast response
4. Ceramic circuit board technology is mature, environmental protection, pollution-free
Up and Down LED Wall Light:
Voltage:AC85-265V
Power:6W
Lumens:270-300LM
Luminous efficiency:90-120LM/W
CCT/Colors:Warm white/Normal white/Pure white/Cool white
LED source:Epistar
PF:>0.9
Ra:>80
Size mm:65*170
Material: Aluminium
Surface Treatment: Anodic Oxidation
Working Humidity: < 95%
Working Temperature: -25° C~45° C
Protection Rating: IP65
Life span: 50, 000Hrs
Power supply: External Constant Current Driver
Certificates:CE ROHS
LED Flood Light:
1. The LED flood lamps shell is using high quality Aviation aluminum, The anode or spray paint surface treatment, the light body delicate and beautiful, the cooling performance is good.
2. The LED flood light body uses toughened glass and waterproof silica gel sealing, and internal epoxy potting, therefore lamps with dual waterproof function, waterproof effect is superior.
3. The lamp light source are imported high brightness high power LED chip, a built-in IC constant-current power, to ensure the stability of the lamps performance.
4. Lamps are adopt PMMA optical lenses. You can choose 15/30/45/65/120 degree angles such as the realization project effect, according to the needs of your specificially choose.
5. The effective distance projection for the LED Flood lights: 10 m-30 m.
6. According to actual working voltage, the selected application of the voltage for led light: DC12V/24 V, AC85-265V.
7. The lamps for protection grade: IP65
Ultrathin LED Flood Light:
Voltage:AC85-265V
Power:10W
Lumens:900-1000LM
Luminous efficiency:90-120LM/W
CCT/Colors:Warm white/Normal white/Pure white/Cool white
LED source:Epistar
Beam angle:120°
PF:>0.9
Ra:>80
Size mm:115*85*36
Material: Aluminium
Working Humidity: < 95%
Working Temperature: -25° C~45° C
Protection Rating: IP65
Life span: 50, 000Hrs
Working Environment: Indoor use (applicable for dry environment)
Power supply: External Constant Current Driver
Certificates:CE ROHS
Warranty Period(years): 3
119 Electronic Semi Conductor Devices Other Components Suppliers
Short on time? Let Electronic Semi Conductor Devices Other Components sellers contact you.
