Find Verified Electronic Semi Conductor Devices Other Components Suppliers, Manufacturers and Wholesalers

Specification:

Measurement range :
So2(micro-flow ndir):0-2000 ppm
No(micro-flow ndir): 0-2000 ppm
Co(micro-flow ndir): 0-5000ppml
O2(electrochemistry):0-25% vol

Resolution:
So2/no/co:1 ppm, o2: 0.01%
Precision:ía2% fs
Response time:ín15s
Dimension:rack type 19 inch 3u
Weight:approximately 10kg

3u casing

Gas parameter

Measurement principle:
Micro-flow ndir : so2, no, co, co2
Electrochemistry: o2
Measurement range :
So2:0-2000ppm
No: 0-2000ppm
Co: 0-5000ppm
Co2:0-25%
O2: 0-25%
Resolution:
So2/no/co: 1ppm
Co2/o2: 0.01%
Precision:
So2, no, co, co2 : 1%fs
O2: 2%fs

Temperature parameter
Measurement principle:
Ambient temperature:thermistor
Flue gas temperature: thermocouple
Range:
Ambient temperature :-10-100íµ
Flue gas temperature : -10-600íµ
Resolution:
Ambient temperature 1íµ
Flue gas temperature 1íµ
Precision:
Ambient temperature ía1íµ
Flue gas temperature ía2íµ

Pressure parameter:
Measurement principle:
Diff. Pressure: silicon diff. Pressure chip
Ambient pressure: silicon pressure chip
Range:
Diff. Pressure:-50hpa ...+50hpa
Ambient pressure: 70kpa...120kpa
Resolution:
Diff. Pressure: 1pa
Ambient pressure: 0.01kpar
Precision:
Diff. Pressure: ía2pa or 5%rel
Ambient pressure: ía0.5 kpa or 2 % rel.

Specification:

Measurement range ch4:0-100%, co2:0-50%, o2:0-25%, h2s:0-9999ppm
Precision:co2/ch4:ía2%, o2:ía3%, h2s:ía4%
Resolution:ch4/co2/o2:0.01% , h2s: 1 ppm
Respond time:less than 20s
Warm up: 10min
Output: rs232
Power: ac220vía10% 50hzía1hz
Weight: 10kg
Dimension: rack type19 inch 3u

3u casing

Product Introduction

AC and DC dual purpose AC and DC withstand voltage tester. The winding is theconcentric pagoda and multilayer cylindrical type low-voltagewinding in inner high-voltage winding in outside; Outer cover is portable which has characteristics such as volume smallness weight light the shape prettiness and move convenience and so on.




xc control cabinet Technical Paramenters


environment temperature 0 40
altitude 100m
relative humidity 85%


Main product specifications
type specification capacity power source output operating mode Refer to the weight
anthroposcopy V A V A
XC-2 2 1 220 50 0-220 10 manual operation 14
XC-3 3 1 220 50 0-220 15 manual operation 16
XC-5 5 1 220 50 0-220 20 manual operation 18

Product description

3 phase capacitance and inductance tester is developed for the problems of capacitance value, and it solves the following problems

Field measurement capacitor needs dismantling cables, not only the big workload but also easy to damage the capacitor.

Low capacitance meter output voltage causes the fault detection rate is low.

The instrument has characteristics of small measured workload, fast and simple, stable performance, high measurement accuracy, high fault detection, etc.

Reactor inductance measurement.



Technical parameters

Working power supply

Rated voltage power frequency of 220 V10

The rated frequency 50Hz

The rated output 2V 20V 500VA

Equipment normal working conditions

Environmental temperature 10 50

Relative humidity 90

Display and print mode LCD display with Chinese characters

Panel high speed printer

Shape weight 370 260 220 mm 15 kg

5. Work principle as shown in figure 1

3 phase capacitance and inductance tester

Feature

The inductance capacitance tester adopts the bridge circuit structure, the standard capacitor and tested capacitor as two arms of the bridge circuit. When conducting the capacitor capacitance value measurement, test voltage applies on the standard capacitor and tested capacitor at the same time. Processor obtains capacitance value of tested capacitor by sensors with acquisition the current signals through the two capacitors after processing.

Due to adopting the standard capacitor, tested capacitor synchronous sampling technology, it may not affected by the power supply voltage fluctuation; Combined with the measurement process is fully automatic, which avoids the error due to manual operation, so it has the characteristics of good stability, good repeatability, accurate and reliable, the machine has tested object automatic identification and short circuit protection function.

Overview

Generator Rotor AC Impedance Testing Instrument is a special instrument for determining whether the turn-to-turn short circuit exists in the generator rotor winding, and can manually and automatically unidirectionally or bidirectionally measure many parameters of the generator rotor such as voltage, current, impedance, power and rotating speed.Generator Rotor AC Impedance Testing Instrument is the latest enhanced AC impedance tester launched by our Company. The instrument adopts the state of the art high speed microprocessor technology with more powerful functions, preferable performances and more convenient use. The Tester has a series of characteristics such as high reliability, easy operation, high test precision, being compact and lightweight and etc., and currently is in the domestic leading level.



Major Technical Indicators

Temperature 5 C 40 C

Relative Humidity 0 1 FS2d

Cos 0.1 0.5 FS2d

1kW 72KW 0.1 Cos 0 1 FS2d

Cos0.1 0.5 FS2d

Frequency 40-75HZ 0.2

Volume 415 225 200mm

Overview

Microcomputer relay protection tester also known as three-phase microcomputer relay protection tester, three-phase microcomputer relay protection tester is a special power relay protection tester.Three-phase microcomputer relay protection tester has 4 phase voltage 3 phase current output, suitable for various types of relay protection device test.Three-phase microcomputer relay protection tester adopts high speed and high performance digital control processor as control microcomputer, and the software uses double precision algorithm to generate arbitrary high precision waveform of each phase.Because of the integrated structure, each part is closely combined, the data transmission distance is short, and the structure is compact.It overcomes the problem of low number of output waveform points caused by long data communication line and narrow frequency band in the measurement and control instrument directly controlled by laptop computer.



Technical parameter :

AC current output
Output accuracy
Phase current output (effective value)
Three merge current output (effective value) 120A
Phase electric length time allows work value (effective value) 10A
Phase current maximum output power 420VA
Maximum output power at the maximum output of three 900VA
Working time is allowed when the maximum output of the three mesh is output 10s
Frequency range (fundamental) 20 1000Hz
Harmonics 1 20 times


AC voltage output
Output accuracy Level 0.2
Phase voltage output valid value 120V
Line voltage output valid value 210V
Maximum voltage output value 240V
Phase voltage / line voltage output power 80VA /100VA
Frequency range (fundamental) 20 1000Hz
Harmonics 1 20 times

Overview

The transformer integrated test system complies with GB1094, GB / T4776, GB / T5169 and other relevant national standards. With the increase in transmission and electrical power generation and the continuous increase in power grids, the successful transformation of the national city network, the farnet, and the number of online quantities and capacity of power transformers are increasing.





Technical parameter:

Equipment measurement range and precision Voltage metering range: 50V 500V
Voltage metering accuracy: 0.2%
Current metering range: 0.1a 5a (can be 0.1A 1A)
Current metering accuracy: 0.2%;
Power frequency withstand voltage test Leak current: 400mA
Input current monitoring instrument Monitoring range: 200A




Function:

Equipment failure automatic detection function, automatically detect peripherals, such as: the voltage regulator is zero, etc .;

Test item: no-load loss measurement, no-load current percentage (automatic conversion to the value of the rated voltage), load loss measurement, the impedance voltage percentage (automatic conversion to the rated current reference temperature) Automatic measurement (voltage ratio measurement, connection group label test), external pressure test (power frequency withstand voltage test), induction pressure test (multiplier multiplier test), insulation resistance measurement, lightning shock test, insulation Oil test (breakdown voltage, flash point, acid value, volume resistivity, moisture, etc.), local discharge test, temperature rise test

Product description

Anti Emulsification performance automatic tester meets the requirement of GBT 7305-87 and GBT 7605-87, which adopts 32-bit high-performance microprocessor, high definition color touch screen and digital PID control algorithm to achieve high accuracy of temperature control, good repeatability, automatic lifting of stirrer, simultaneous test of four samples, smart storage and convenient check of test result.



Technical index

Temperature measurement Platinum resistance

Water bath temperature 54 Room temperature 100 can be set arbitrarily

Control accuracy 0.1

Stirring speed 1500 15 rmin

Number of cylinders 4

Self-check function Stirring device lifting and rotating

Display High definition color touch screen

Power supply AC 220V 22V

Power 1800VA

Frequency 50Hz 2.5Hz

Ambient temperature 10 35

Ambient humidity 85

Weight about 24kg

Profile size 358mm 302mm 858mm

Anti-emulsification performance automatic tester

Product description

Current transformer field tester was developed with high-end testing technology, large-scale electronic circuit design and accord with national related protocol . It has solved the problem of big working intensity,trival operation while on-site test of current transformer, voltage transformer. Meanwhile the product has a reliable performance,and the function is strong.



Technical index

Overview

In the power system factories and enterprises have a large number of electrical equipment. Most of its internal insulation is oil-filled insulation type. Dielectric strength test of insulating oil is a necessary routine test item. In order to adapt to the rapid development of the power industry our company is the first in China to develop a fully automatic oil dielectric strength test system. This series of products according to the latest national standard GB t507-2002 the power industry standard dl429.9-91 and the latest power industry standard DL t846.7-2004 design and manufacture using microcomputer control mechanical and electrical integration of all automation high test accuracy greatly improve the work efficiency but also greatly reduce the labor intensity of the staff. It is agreed that this series of products is the ideal insulation oil voltage test equipment in China.



Specification

Technical Parameters
Power supply voltage AC 220V22V
Power frequency 50Hz 2.5Hz
Work rate 200W
output voltage 0-80kV
Booster capacity 1.5kVA
Booster speed 2.0 2.5 3.0 3.5kV s adjustable
Total voltage distortion 3
Installation dimensions 470 390 420mm3
Weight 40kg
Conditions of Use
Environment temperature 40
Relative humidity 80
Capacity of the oil cup 200ml
Distance between the electrodes 2.5mm

DTDL-8110 Cablefault Test Set is an integrated set of Cablefault Detection
and Location Devices. It is applicable for many types of power cable,
communication cable and optical cable. It can accurately measure the distance
of cablefault and locate the fault point.

The system includes:
1) DTDL-8110 Mainframe.
2) DTDL-8032R Receiver.
3) RF Inductive Tracking Rod.
4) Potential Difference Locating Rack with 2 pins.
5) AF Stethoscope and Headphones (for Listening mode).
6) Grounding Pin.

Tgs p/n cs & css (hc-49s&hc-49ss)
Dim.(mm) 11.05x4.7xh
Frequency 3.20000~100.0mhz

Tol.: G¦10 ppm ~ G¦50 ppm
Stability: G¦10 ppm ~ G¦50 ppm
Drive level: 100 uw max.
Aging: G¦5 ppm max.