Please click here to check who's online and chat with them.

Find Verified Computer Hardware Peripherals Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : Shenzhen   Guangzhou   Shanghai  
Jun-19-21

Portable Waveform Recorder

$770 - $15.40K
MOQ: Not Specified
 
WFLC-VI Portable Waveform Recorder is a portable device based on the structure of industrial portable computer. It takes high-performance DSP high-precision ADC chip and embedded operating system as hardware and software architecture and integrates data acquisition processing transmission storage analysis and other functions as one.

DSP acquisition chip for data acquisition and calculation so as to achieve full digital analog signal filtering flexible and diverse sampling frequency from 10K /s 20K /s 50k/s 100K /s can be selected by users can be used for transient electrical signal waveform recording and analysis.

With advanced industrial control kernel and embedded operating system users can easily carry out data storage backup analysis output and other operations

WFLC-VI portable waveform recorder is a collection of fault wave record generator characteristic test and other functions in the integration of intelligent instrument with its small size strong function scope of application is wide flexible configuration and many other advantages favored by the masses of users is a power utility workers standing it will be for the electric power industry production and technological progress to make due contributions.

The product names Waveform recorder waveform an
May-13-22
Supplier From Wuhan, Hubei, China
Jul-08-14
Supplier From Wuhan, Hubei, China
Jul-21-11
Supplier From Wuhan, Hubei, China
Jun-26-21

Resonant Booster For Cvt

$770 - $15.40K
MOQ: Not Specified
 
1 Due to full compensation of resonant reactive power the power of power supply and equipment is less than 1/10 of the required capacity of the subject (1/Q>10). Small size and light weight with the same capacity large output capacity of the device and small power capacity required cheap convenient and safe to use;

2 Series resonance is actually a current filtering circuit so that the current passing through the subject is basically the fundamental current and the waveform distortion rate (THD) of the output voltage is very small which is superior to all existing ac voltage withstand equipment.

3 The short circuit current of the sample after flashover or breakdown is only less than 1/10 (1/Q) of the test current before short circuit which can effectively prevent the expansion of damage to the fault point after breakdown;

4 After flashover the arc will be automatically extinguished immediately. The long (number of seconds) process of restoring resonant state voltage after arc quenching is a steady-state establishment process and there is no danger of voltage overshoot and no danger of restoring overvoltage in microsecond millisecond transient process.
83 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
Aug-20-24
 
This FiberHTT 1550 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 80km. The SFP+ 80km module electrical interface is compliant to SFI electrical specifications. The
transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Aug-20-24
 
This FiberHTT 1310nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. The SFP+ 40km module electrical interface is compliant to SFI electrical specifications. The
transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Aug-20-24
 
This Hengtaitong 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Aug-20-24
 
This FiberHTT 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 2km. The SFP+ 2km module electrical interface is compliant to SFI electrical specifications. The transmitter
input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Aug-20-24
 
The Hengtaitong SFP transceivers are high performance, cost effective modules supporting
data-rate of 1.25Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with
atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Aug-20-24
 
The FiberHTT HPBT3R2-LR single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-LR module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC
Aug-20-24
 
The FiberHTT HPBT2R3-LR single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT2R3-LR module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
Aug-20-24
 
The FiberHTT HPBT3R2-L2 single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-L2 module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
Aug-20-24
 
The FiberHTT H9S3124-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of 1310nm. The transmitter section incorporates an advanced FP and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
Aug-20-24
 
The FiberHTT H9B5324-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of Tx 1550nm Rx1310nm. The transmitter section incorporates an advanced DFB and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
Aug-20-24
 
The FiberHTT H9B3524-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of Tx1310nm Rx1550nm. The transmitter section incorporates an advanced FP and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
Aug-20-24
 
Hot Pluggable QSFP28 form factor
Supports 101.3Gb/s aggregate bit rate
Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
Single MPO-12 receptacle
Power dissipation:
Aug-20-24
 
FiberHTT 100G QSFP28 LR4 integrates four transmitter and receivers into one module. In the
transmitter side, the four lanes of optical data channels are optically multiplexed by the integrated
optical multiplexer. In the receive side, the four lanes of optical data channels are optically de- multiplexed by the integrated optical de-multiplexer. Each data channels are recovered by a PIN photo- detector and trans-impedance amplifier, retimed. The product is designed with form factor, optical/electrical connection and digital diagnostic
interface according to the QSFP28 Multi-Source Agreement (MSA) and compliant to IEEE 802.3ba.
Aug-16-20
 
Biggest covering wide A3+ (300x600mm)
Printing precision 12001200dpi
Printing speed 33ppm
Installed porcelain powder C,K,M,Y total 1kg
Firing temperature: 780-830
83 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
See what buyers and suppliers are discussing in Computer Hardware Peripherals import export community