Find Verified Waterproofing Material Suppliers, Manufacturers and Wholesalers

PVDF Membrane:
Thickness: 95±15um,
Bubble point:0.07MPA-0.01MPA
Micron: 0.1micron,0.22micron,0.45micron
Flow Rate:>6ml/cm2.min

N66 Membrane:
Thickness: 95±15um,
Bubble point:0.18MPA-0.28MPA
Micron: 0.1micron,0.22micron,0.45micron
Flow Rate:>8ml/cm2.min

MCE Grinder Membrane filter 0.45 um Sterile package.

Colored polyurethane underwater paint

Product outline
This product is colored. Non-tar double component green environmental protection underwater paint. The cold construction craft simple service convenience may carries on the construction under the normal temperature to the even roofing and each kind of structure complex spot. Whole Cheng Moxing good has rubber elastic elongation ratio the best pupil without the joint to be able to adapt the basic unit crack and the distortion. The cementation intensity high applicable scope is broad. But is welcoming the water to use by Shui Chushi is 1 level of waterproof ideal material. The service life long bears the period of five days to bear the aging, to bear the greasy dirt and certain acidproof alkalinity stable property service life may amount to above 20 years.
Mainly uses in the roofing, side the subsurface construction, the ground construction and the building hit and the joint.

Material amount used
Generally each square meter needs 2-2.7kg thickness 1.5-2mm. to divide 3-4 coating, time coating wants evenly consistent. High and low spreads blows the direction to do alternately in any case. Each time the time interval decides general by the construction ambient temperature and the paint film solidification degree many in 24 hours. Does not stick take feel as the standard. Stick an adhesive-bonded cloth or the Bolivian filament cloth according to the design requirements also coca coating either the multi-layered middle shop are better.

Paint film protection
In order to lengthen the waterproof layer the service life to guarantee the project quality. On the person roofing makes the cement mortar protector on the paint film when the last paint film has not solidified. Scatters 2-3mm the granulated substance or the stone chips favors the paint film and the protector cementation.

KT series polyethylene suffers the polypropyle

Product outline
The KT series polyethylene suffers the polypropylene fiber high polymer compound waterproofing volume material is by the polyethylene class synthesis high polymer material waterproof layer, the increase assistant, provides for old age the level, the enhancement to increase the tacky surface and the polypropylene fiber adhesive-bonded cloth primarily the new waterproofing material which becomes after the automatic production line processing.

* this product high and low surface roughness, the adhesive-bonded cloth textile fiber assumes without the rule overlapping structure, forms three-dimensional mesh, suits many kinds of material agglutinations, especially with cement material in solidification process direct agglutination, so long as does not have Mingshui then to be possible to construct, its overall performance is good, the tensile strength high, easy to cake, the friction coefficient small may suppose directly in the sandy soil uses, the stable property is reliable. Is one kind non-toxic, the non-pollution green environmental protection product.

* this product is suitable for the industry and the civil construction roofing and the basement waterproofing, moisture-proof, separates was mad that the room inner wall, the ground are moisture-proof, bathroom waterproofing, water conservation pond storehouse, channel, arch of bridge waterproofing, anti-seepage, waterproofing and so on metallurgy chemical industry against pollution.


Technical process
Approves and sweeps clear the basic unit - - configuration adhesive (along with to use along with configuration) - - the node spot (masculine and feminine elements angle, eaves, to fall spots and so on drainage opening, pipeline hole) the extra ply construction - - waterproof layer construction - - waterproof layer approval - - protector construction.

Our GEO textile section, registered capital of 50.7 million yuan, covers an area of 80000 sqm, the existing staff of more than 100 people, including all kinds of professional and technical personnel more than 40 people, as a high-quality geotextile manufacturer, we provide preferential geotextile prices, looking forward to long-term cooperation with you!
Advanced production equipment, complete detection means.The company's main production equipment are using the current advanced technology, advanced craft forging.There are 5 non-woven production lines with an annual output of 10 thousand tons: tow of them is a 6.6m wide quasi-high-speed non-woven production line;With an annual production capacity of 22 million square meters, a three-layer co-extrusion line of 10 meters of geomemetic film and waterproof board is installed on the same platform.Composite geomembrane production line, woven cloth production line, needle-punched carpet production line, polyester filament geotextile production line.Has a complete, precise, reliable testing instruments and equipment, testing means complete, in line with the international ISO standards.Testing equipment mainly includes electronic fabric strength machine, eight blue oven, thickness measuring instrument, low temperature test box, punching machine, impermeable instrument, bending instrument, electric heating constant temperature blowing drying oven, melt flow rate measuring instrument, etc.Ensure that all geomaterials and carpets produced meet standards and customer requirements.

Reliable product quality, after - sale service.The main products are staple fiber needled geotextiles, polyester filament geotextiles;Needle-punched carpet, craft carpet;Geomembrane: PE film, EVA geomembrane, HDPE geomembrane, LDPE geomembrane, rough surface geomembrane, waterproof board;Composite film: two cloth a film, a cloth a film, two cloth two film composite geomembrane;Woven cloth: polypropylene woven cloth, polyethylene woven cloth, high strength woven cloth and so on.The products are widely used in the world key projects, involving landfill sites, reservoirs, artificial lakes, water conservancy projects, high-speed railways, expressways, airports, ports and beaches and other engineering fields.The product quality of the company is stable and reliable, the price is reasonable, and the after-sales service is perfect, which has been praised by the majority of users.

Interior foundation waterproofing addresses basement internal walls like partitions and equipment room walls. Although not directly contacting soil, they can become damp or moldy due to capillary action, condensation, or slab leaks, affecting indoor environmental quality and equipment safety. This inside foundation waterproofing focuses on preventing moisture migration through walls or structural cracks into interior spaces. Materials are typically chosen for environmental friendliness and ease of application, such as breathable coatings or damp-proof layers. Suitable for basement partitions, storerooms, and utility areas, it enhances comfort and functionality of underground spaces, preventing health risks from dampness.

INTERIOR FOUNDATION WATERPROOFING PRODUCTS
KINJOYA POLYMER CEMENTKINJOYA POLYMER CEMENT
Two-component interior foundation coating made from acrylate polymer emulsion and cement. Solvent-free, non-combustible, non-toxic. Offers aging resistance, low-temperature flexibility, high adhesion, water resistance, and crack resistance.

Asphalt compound embryo flexible waterproofing

Product synopsis:
The compound embryo flexible waterproofing volume material is take the polyester felt - grid cloth or the adhesive-bonded cloth - grid cloth as a carcass of tire, uses rubber resin, assistant and so on modified the asphalt to make the dip coating material, on the surface turns round may the curl laminated shape waterproofing material which by the polyethylene membrane, the granulated sugar, the mineral piece (grain) isolation materials and so on material or aluminum foil makes.

Product execution country JC/T690-1998 "Asphalt Compound Embryo Flexible Waterproofing Volume Material"

Characteristic
Uses the compound carcass of tire, is advantageous in the improvement product performance, enhances the mechanical strength, the enhancement waterproofing performance;
Has the wide temperature sector, serviceable;
Uses compound carcass of tire, this kind of product low-price quality merchandise, and is durable.

Applicable scope
But widely uses in each kind of domain and the type project waterproofing, most is suitable for the below project type:
Industry and civil construction roofing project waterproofing, including: Non-on person roofing, on conventions and special roofing project and so on person roofing, heat preservation roofing, non-heat preservation roofing, planter roofing, roof parking lot, inversion roofing;
Industry and civil construction understructure work waterproofing, moisture-proof as well as construction and so on indoor swimming pool, fire basin waterproofing;
The subway, the tunnel, the concretes lay the road surface the bridge floor, the sewage treatment field, trash to bury municipal engineering waterproofing and so on field;
Water conservancy facilities waterproofing and so on canal, basin.

Specification
Breadth: 1000mm Thickness: Divides into 3mm and 4mm
Area: Each beginning integral should not be 10m2 (3mm, 4mm).

Physical mechanics performance
Gusu the asphalt compound flexible waterproofing volume material physical mechanics performance achieves JC/T690-1998 "Asphalt Compound Embryo Flexible Waterproofing Volume Material" the standard request, its physical mechanics performance sees the next table.

The products are made by soaking the base in bituminous or thermo plasticity elastomer(such an styrene butadiene styrenef¼SBS),or thermoplastics(such as atactic Polypropylene---APP,APAO,APL)modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane.
good self heating, easy application, and long service, etc.

Elastomer (SBS), plastomer (APP) modifying asphalt

Product Description
Should produce the strain with the elastomer (SBS) either the thermosplasticity can (ASP, APAO and so on) the modifying asphalt soak the embryo base, both sides spreads by the elasticity or the plastomer modifying asphalt spreads the cap rock, on the surface scatters by the granulated sugar, the mineral pellet (piece) or the polyethylene membrane and so on Shui Juancai who makes.
This product with has the good waterproof performance and the anti-aged performance, and easily has the high temperature not flow low temperature not embrittlement, the construction, the useless life long characteristic

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6. Product features: excellent water resistant breathable film, elasticity, breathable, abrasion and chemical resistance, weatherability , high tensile strength, microbial resistance, impact resistance, transparency
7. Applications:The unique performance characteristics also make TPU the preferred base substrate for a variety of performance applications: medical fabrics, smart clothing, water resistant breathable textiles, membranes automotive protection films, surfacing applications, tape backing film, snow clothing, raincoat, hat, ski gloves, winter jacket, sport goods

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6.Product features: excellent water resistant breathable film, elasticity, breathable, abrasion and chemical resistance, weatherability , high tensile strength, microbial resistance, impact resistance, transparency
7. Applications:The unique performance characteristics also make TPU the preferred base substrate for a variety of performance applications:medical fabrics, smart clothing, water resistant breathable textiles, membranes automotive protection films, surfacing applications, tape backing film, snow clothing, raincoat, hat, ski gloves, winter jacket, sport goods

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6. Product features: excellent water-resistance and vapor transmission, abrasion and chemical resistance, extreme high and low temperature resistance , good toughness, soft touch, resistance to hydrolysis.
7. Applications:snow clothing,raincoat,hat,ski gloves,winter jacket,sport goods,mailitary and other products.

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6. Product features: excellent water-resistance and vapor transmission, abrasion and chemical resistance, extreme high and low temperature resistance , good toughness, soft touch, resistance to hydrolysis.
7. Applications:snow clothing,raincoat,hat,ski gloves,winter jacket,sport goods,mailitary and other products.

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6. Product features: excellent water-resistance and vapor transmission, abrasion and chemical resistance, extreme high and low temperature resistance , good toughness, soft touch, resistance to hydrolysis.
7. Applications:snow clothing,raincoat,hat,ski gloves,winter jacket,sport goods,mailitary and other products.

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6. Product features: excellent water-resistance and vapor transmission, abrasion and chemical resistance, extreme high and low temperature resistance , good toughness, soft touch, resistance to hydrolysis.
7. Applications:snow clothing,raincoat,hat,ski gloves,winter jacket,sport goods,mailitary and other products.

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6. Product features: excellent water-resistance and vapor transmission, abrasion and chemical resistance, extreme high and low temperature resistance , good toughness, soft touch, resistance to hydrolysis.
7. Applications:snow clothing,raincoat,hat,ski gloves,winter jacket,sport goods,mailitary and other products.

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6. Product features: excellent water-resistance and vapor transmission, abrasion and chemical resistance, extreme high and low temperature resistance , good toughness, soft touch, resistance to hydrolysis.
7. Applications:snow clothing,raincoat,hat,ski gloves,winter jacket,sport goods,mailitary and other products.

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6. Product features: excellent water-resistance and vapor transmission, abrasion and chemical resistance, extreme high and low temperature resistance , good toughness, soft touch, resistance to hydrolysis.
7. Applications:snow clothing,raincoat,hat,ski gloves,winter jacket,sport goods,mailitary and other products.

TPU waterproof breathable vapor transmission films:TPU waterproof breathable vapor transmission films:
1. Certifications: Bluesign / GRS / OEKO-TEX and etc.
2.Thickness : 0.012 /0.015/ 0.02mm or as customer's requirement.
3. Width: 1550mm /1520mm / as per requirement
4. Color: Nature / milky white.
5. Finish available: Matte/ with printing
6. Product features: excellent water-resistance and vapor transmission, abrasion and chemical resistance, extreme high and low temperature resistance , good toughness, soft touch, resistance to hydrolysis.
7. Applications:snow clothing,raincoat,hat,ski gloves,winter jacket,sport goods,mailitary and other products.