Pure titanium processing parts have high titanium content, good plasticity, easy processing and forming, and good stamping and welding performance. It is resistant to corrosion in the atmosphere, ocean, and other conditions.
Pure titanium processing parts are mainly used in aircraft skeletons, ship pipes, valves, pumps, heat exchangers, distillation towers, coolers, ion pumps, and compressor valves. In the industry, Ta1 is generally required for high formability, Ta3 is used for wear resistance and high strength, and Ta2 is the most widely used in general.
Product parameters
Product Name: Titanium Processing Parts
Material grade: TA1 TA2 TC4 TA9 TA10 TA15 TC11
Executive standard: GB/T, GJB, AWS, ASTM, AMS, JIS
Process state: Annealed state (M) hot working state (R) cold working state (Y) (annealing, ultrasonic flaw detection)
Surface treatment: Sandblasting surface bright surface
Product use: Aerospace equipment, petrochemical, shipbuilding, automobiles, watch accessories, etc.
Features
High-quality material selection
Professional processing
Fine workmanship
Special customization
The characteristics of titanium
1. It has a low density, a high strength, and a high specific strength.
Titanium has a density of 4.51g/cm3, which is 57% that of steel, less than twice that of aluminum, and three times stronger. Titanium alloy has the highest specific strength of any regularly used industrial alloy. Titanium alloy has a specific strength that is 3.5 times that of stainless steel, 1.3 times that of aluminum alloy, and 1.7 times that of magnesium alloy. As a result, it is a necessary structural material in the aerospace sector.
2. Excellent corrosion resistance
Titanium's passivity is dependent on the presence of an oxide film; its corrosion resistance in oxidizing media is far superior to that in reducing medium, and fast rate corrosion can occur in reducing medium. Titanium is not rusted in some corrosive environments.
3. Excellent heat resistance
Aluminum typically loses its initial high mechanical qualities at 150 C, stainless steel at 310 C, and titanium alloys retain good mechanical properties at around 500 C. When the airplane achieves 2.7 times the speed of sound, the surface temperature of the aircraft mechanism hits 230 C, and the aluminum alloy and magnesium alloy can no longer be used, while the titanium alloy can. Titanium has a high heat resistance, making it ideal for turbine disks, aeroengine compressor blades, and aircraft rear fuselage skins.
Dia 40mm titanium fiber felt is made by a special laying process and a special ultra-high temperature vacuum sintering process. Compared with titanium powder sintered plate, Ti fiber felt has an excellent three-dimensional network, porous structure, high porosity, large surface area, uniform pore size distribution, special pressure, and corrosion resistance, and can be rolled and processed. Titanium fiber felts are widely used in military, aerospace, civil, medical care, and other industries abroad.
Titanium fiber felts are primarily used in electrolyzer stacks as the flow field or diffuser material, particularly on the oxygen (anode) side.
Features:
has an excellent three-dimensional network porous structure;
high porosity, several times larger surface area;
uniform pore size distribution, strong corrosion resistance, good water permeability;
high porosity, and heat dissipation;
good performance, high current density, low voltage, stable performance, long life, and so on.
Parameters
Color: Light grey
Dimension: Customized as request
Thickness:0.2mm-2mm Often made thickness (0.25,0.4,0.6,0.8mm)
Porosity:30-50%
Description : High Quality titanium round bar
Standard : ASTM AISI SUS SS EN DIN JIS
Specification: Diameter: 3mm-400mm
Length: 3m, 4m, 5.8m, 6m, 11.8m or other length as requirement
Type:Round bar
Characteristic: Stainless steel bar is lower percent of C and Mo,which is excellent corrosion ,resistance in Ocean and Chemical Industry
Surface Treatment : Bright ,Polishing ,Peeled,Bright or as your requirement
Application : Stainless Steel Round Bar is mianly used in
1:Electric power,petroleum,boiler, high temperature resistant, low temperature
resistant,corrosion resistant
2:Tableware, cabinet, cutting tool, boiler, auto part
3:Medical instruments, building materials, food industry
4:Sea,chemical industry and Machine Manufacture
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product.
We manufacture Titanium pipe fittings , including socket welding fittings, butt welding fittings and threaded fittings :
Titanium Elbow (45�°, 90�°, 180�°)
Titanium Reducer (Concentric, Eccentric).
Titanium Tee (Straight, Reducing).
Also stub ends, caps, flanges etc.
Standard: ASME B16.5, ASME B16.9, ASME 16.11
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product.
We manufacture Titanium Wire and Welded Wire:
Titanium wire: GR1, GR2, Ti-6AL-4V
Diameter (0.03-6.0mm) Straight length/Spool/Coil with ASTM B863
Titanium welded wire:
ERTi1, ERTi2, ERTi3, ERTi4, ERTi5, ERTi7, ERTi9, ERTi12, ERTi23,
Diameter: 0. 05mm~10mm (0.002inch-0.4inch) Straight length/Spool/Coil with AWS A5.16 standard.
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU TUV and a professional manufacturer and exporter of titanium material and product.
We manufacture Titanium metal clad material / Explosive clad metal material / Titanium tube sheet for process equipment. Such as Ti Gr2 as clad material, Steel A516 GR70 as base material. Standard as per ASTM B898.
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product.
We manufacture Titanium bar and titanium rod:
Grade : GR1, GR2 , GR3, GR4, GR5, GR7, GR9,GR12,GR16,GR17 etc
Forged Bar: diameter (26-200) Ã?? less than or equal to 4000
Rolled Bars: diameter (8-25) Ã?? less than or equal to 1500
Standard: ASTMB348, AMS4928, ASTM F67,ASTM F136, H7/h7 tolerance is available.
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product.
We manufacture titanium sheet and titanium plate
Grade:GR1, GR2, GR4, GR5, GR7,GR9,GR12,GR16,GR17 Ti-8-1-1 etc
Size (mm): (0.5 to 150mm) thk Ã??Max 2500 widthÃ?? Max 12000 length
Standard width and Length (mm): 1000 widthÃ?? 2000 Length
Standard: ASTM B265, AMS 4911, AMS 4916.
Titanium cold coil / titanium strip: GR1 GR2,
Size(mm):0.5mm-3mmThk max1250Width Coil with ASTM B265.
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product.
CDM titanium welded tubes are processed from titanium coil, and longitudinally welded by TIG process without metal filler, so it guarantees the homogeneity of the welded area.
Grade: GR1, GR2,
Size(mm): OD(8-102)Ã??WT(0.5-1.2)Ã??L, at random Length, coil tube, U-Tube.
Standard: ASTM B338 , ASME SB338.
EMAIL: sales at cdmtitan dot com
Grade: GR1, GR2, GR7,GR12 etc.
Size(mm): OD(114-1220)Ã??WT(2.1-12.7)Ã??L, manual welded from titanium plate.
Standard: ASME SB862.
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product.
CDM Titanium produce titanium seamless tube to world-wide clients, who specializing in process equipment such as heat exchanger, also for power generation, thermal, and oil and gas exploration etc.
Grade: GR1 GR2 GR3 GR7 GR9 GR12 GR16 GR17.
Size (mm): OD1.5~ 620, Wall Thickness: 0.4 ~ 20, Maximum length: 18000mm.
Standard: ASTM B338, ASME SB338, ASTM B861, DIN17861 etc.
EMAIL: sales at cdmtitan dot com
Titanium forgings in shape for billets,bars, discs,square bars, rings, valve bodies, flanges . With material grade 1, gr.2,gr.3,gr.4,gr.5,gr.7,gr.9,gr.12 and so on.
1. Manufacturing Technique
Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature.
2. Properties of titanium sintered porous materials:
Pore diameter uniformity, pore stability, high separation efficiency.
High porosity, low filtration resistance, and high permeability.
Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance.
Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements.
Good mechanical properties, low differential pressure, large flow.
Strong anti-microbial ability, does not interact with microorganisms.
Online regeneration, easy cleaning, long service life.
Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry.
Excellent electromagnetic shielding performance.
Good damping and shock resistance.
3. Application of titanium sintered porous materials
Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials, noise-canceling materials according to their physical and structural properties.
Decarburization filtration of pharmaceutical liquids.
Electrolytic gas industry precision filtration, gas distribution.
The medical industry makes biological implants.
Water treatment industry odor sterilization filtration and ozone aeration.
Clarification and filtration in food and beverage processing.
Prefiltration of reverse osmosis system for the electronics industry.
Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry.
High-pressure air filtration in the aerospace industry.
Filtration and recovery of the precious metal catalysts in the fine chemical industry.
The electrode matrix of a fuel cell.
Catalyst carrier in gas and liquid catalytic reactions.
4.Precautions for the use of titanium sintered porous materials:
During installation, disassembly and clean avoid scratches, collisions and falls on hard objects.
When using, the filtrate is filtered from the outside in to avoid the reverse direction.
Avoid instant pressurization when the filter element works.
When the filtration efficiency is less than 50%, the filter element should be cleaned in time.
When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times.
If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.
Details: EnergyTi-Professional titanium rod, titanium alloy rod, titanium square rod, titanium round rod, production suppliers, spot supply, complete standards, specifications.
Industrial titanium wire, titanium alloy wire, pure titanium glasses wire, titanium straight wire, pure titanium wire, titanium welding wire, titanium wire for hanging hook, titanium coiled bar, titanium polished wire, medical titanium wire, titanium nickel alloy wire.Titanium wire is mainly made of nanometer zinc-titanium wire film, which is made of polymer material, anti-corrosion and anti-acid technology. It is widely used in chemical industry, petroleum, pharmaceutical industry, papermaking, artificial leather, food processing, agricultural products and aquatic products. It has the characteristics of acid resistance, abrasion resistance and corrosion resistance.
Size:
Dia 0.03-6.0mm
MOQ:5 kilograms 1000,2000,3000mm or upon customer's request
Production standard:
GB,ASTM, BS, BSW, ISO
ASTM B863, ASTM B348, ASTM F2063, ASTM F67, ASTM F136, AWS A5.16, ISO 5832-2, ISO 5832-3, �?�?�¡�¢27265
Production status and manufacturing process of titanium alloy rod:
Production state: hot processing state (R), cold processing state (Y), return state (M)
Polishing, picking, acid washed, black oxide
Packing:
Straight bar;Volume;Disc winding wheel;The coil is not wound round the wheel;The spool
Export wooden case packing or according to customer's request
