Find Verified Pollution Control Equipments Suppliers, Manufacturers and Wholesalers

Inlet pressure: 0.6~1.0Mpa
Inlet temperature: 5~65 celsius degree
Initial pressure drop: less than 0.005Mpa
Filter route: 5um
Water removal rate: less than 99%
Outlet air oil content: less than 10ppm

Air filter

compressed air filter
1). Separator filter (HF9)
For bulk liquid removal plus a 3 micron coalescer (5ppm w/w maximum remaining oil content)
Two-stage filtration
* First stage: two stainless steel orifice tubes provide 10 micron mechanical separation
* Second stage: in-depth fiber media captures solid and liquid particles to 3 micron

2). Air line filter (HF7)
For removal of liquid water and oil; removes solid particles to 1 micron (1.0 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two-stage filtration
* Firt stage: captures larger particles with alternate layers of fiber media and media screen
* Second stage: coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media

3). High efficiency oil removal filter (HF5)
For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.01 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration

* First stage: multiple layers of bonded, blended fiber media for fine coalescence

* Second stage: multiple layers of bonded, blended fiber media for fine coalescence
Outer coated, closed cell foam sleeve

4). Ultra high efficiency oil removal filter (HF3)
For coalescing ultra-fine oil aerosols; removes solid particles to 0.01 micron (0.001 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* First stage: coated, closed cell foam sleeve acts as pre-filter and flow disperser
* Second stage: multiple layers of matrix blended fiber media for ultra-fine coalescence
Outer coated, closed cell foam sleeve

5). Oil vapor removal filter (HF1)
For removal of oil and hydrocarbon vapors normally absorbable by activated carbon; removes solid particles to 0.01 micron (0.003 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* first stage: stabilized bed of finely divided carbon particles removes the majority of the oil vapor
* Second stage: multiple layers of fiber media with bonded micro fine carbon particles remove the remaining oil vapor
Multiple layers of fine media prevent particle migration
Outer coated, closed cell foam sleeve prevents fiber migration
Designed life is 1000 hours under rated conditions.

Sterile filter

* adopt 6 grades element which complement with America UPS plastic biology
* element material is SPF who is good at hydrophobe, precision to be 0.01um.It can filter bacterium, virus & phagocyte.
* o ring seal (silica rubber and fluorine rubber), ensuring to filter air 100%.
* unique outer heat-resistant polypropylene.It can stand 140 celsius degree steam bacterium removal and will not reduce its precision if repeat sterilizing.
* stainless steel of housing, polishing of internal, max.Working pressure to be 1.0mpa.
* operation temperature less than 80 celsius degree .

Air dryer(desiccant air dryer) hsd-10wxf

Desiccant compressed air dryer (heatless purge and externally heated purge)

1). Heatless purge desiccant air dryer
Inlet temperature: 0~45 celsius degree
Inlet oil content: 0.01ppm
Working pressure: 0.6~1.0mpa
Dew point: -20~-70 celsius degree
Purge air: 12%
Desiccant: activated alumina & molecular sieve
Purge mode: heatless purge
Working method: continuing alternation between two towers
Working periods: t=10~20min.
Control mode: micron computer auto controlling
Installation mode: indoor, non-basement

2). Externally heated purge air dryer
Inlet temperature: 0~45 celsius degree
Working pressure: 0.6~1.0mpa
Dew point: -40~-70celsius degree
Purge air: 4~6%
Desiccant: activated alumina & molecular sieve
Purge mode: externally heated purge
Working method: continuing alternation between two towers
Working periods: t=120~140min.
Control mode: micron computer auto controlling
Installation mode: indoor, non-basement

Desiccant Compressed Air Dryer two types ---heatless purge and externally heated purge

1). Heatless purge desiccant air dryer
Inlet temperature: 0~45 Celsius degree
Inlet oil content: less than 0.01ppm
Working pressure: 0.6~1.0Mpa
Dew point: -20~-70 Celsius degree
Purge air: less than 12%
Desiccant: Activated alumina & molecular sieve
Purge mode: Heatless purge
Working method: Continuing alternation between two towers
Working periods: T=10~20min.
Control mode: Micron computer auto controlling
Installation mode: Indoor, non-basement

2). Externally heated purge air dryer
Inlet temperature: 0~45 Celsius degree
Working pressure: 0.6~1.0Mpa
Dew point: -40~-70 Celsius degree
Purge air: less than 4~6%
Desiccant: Activated alumina & molecular sieve
Purge mode: Externally heated purge
Working method: Continuing alternation between two towers
Working periods: T=120~140min.
Control mode: Micron computer auto controlling
Installation mode: Indoor, non-basement

Low Dew Point Combined Compressed Air Dryer

Working pressure: 0.6~1.0Mpa
Pressure drop: less than 0.05Mpa
Inlet temperature: less than 45 celsius degree (Normal temp. type)
Inlet temperature: less than 80 celsius degree (High temp. type)
Dew point: -40~ -70 celsius degree
Cooling watre temperature: less than 32 celsius degree
(water cooling type)
Purge air: 3~5%
Control mode: Micro-program controller
Installation mode: Indoor, non-basement

Function traits:
1. Models: Wall Hanging/Cabinet/Ceiling Mounted/Moveable.
2. Initial effect and middle effect filter
3. High-strength C-UV tube up to 15,000uw/square cm with leakage less than 1uw/square cm.
4. Stainless disposable filter net
5. Photocatalyst filter
6. Mighty activated carbon deodorizing film
7. High tension electro-static absorption
8. Oxygen anion generator
9. Automatic ultraviolet intensity and environment temperature detecting device
10. Automatic ultraviolet lamp error alarm
11. Automatic filter expiry alarm
12. Automatic fan error alarm.
13. Automatic accumulated contamination alarm.

Application scope:
Operating room, maternity ward, infant room, premature infants room, germ-free area of supplying room, Department of Burn, ICU and common sickroom, etc.

Our products are exported to many countries and we have been committed to product perfection for many years.
We accept OEM customization from customers, and customers can also sell our brands.
Become our agent.
Looking forward to your inquiry and participation.
We will give you the best price, please contact me if necessary.

Our products are exported to many countries and we have been committed to product perfection for many years.
We accept OEM customization from customers, and customers can also sell our brands.
Become our agent.
Looking forward to your inquiry and participation.
We will give you the best price, please contact me if necessary.