Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity
Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process.
Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products.
Parameters
1.process arrange diameter of round shape onion 30-150mm.
2.capacity 1000-1500kg/h
3.Power 3kw
4.Voltage 380V
5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw
6.Machine size 1.5*1.3*1.4m
7.Weight 420kg
Start working flowing:
1.Fill onion in the loading box
2.Start the pneumatic valve switch
3.Start the power-supply switch
4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin
5.When finished adjusting ,The equipment operates normally and automatically.
#onionpeelingmachine
#onionrootcuttingmachine
#hoteyeonion
#onionprocessmachine
#foodfactorymachine
#spicyonionpeelingmachine
#hoteyeonionpeelingmachine
Hot eye Onion Peeling Machine
Automaitc onion peeling machine with onion root cutting in-one-machine
1 The whole process of onion from feeding, peeling, peeling, root cutting, output and other processes is automated and unmanned, which can save a lot of labor costs.
2 Peel by layers, either more or less. The equipment is designed with a cortex controller, which can be peeled as required. Only one layer of skin can be peeled, or two or three layers of skin can be removed.
3 The peeling is clean and effective. The peeled scallions are clean and good in appearance.
4 The root cutting part is equipped with an onion size recognition mechanism, and the size of the cutting amount can be adjusted randomly to avoid the disadvantage of cutting large onions into small ones and small ones into large ones.
5 Small size, high yield. The equipment design strives to reduce the volume on the premise of increasing the output, so as to apply to various application scenarios such as large, medium and small enterprises and small family workshops.
Onion root cutting machine,onion peeling machine to solve people hot eye / spicy eye when process onion
size 300*80*140cm,
capacity 50-60pcs/min, weight 300kg
onion process machine ,how to process spicy onion .
onion food process machine
Please allow me to make a self-acceptance. I'm Our company specializes in peppers, garlic, ginger and onions.
We took it out of the ground, cleaned it, screened it and dried it.Ensure that the size of each garlic can fully meet the standard.
Our company has just completed two containers of pure white garlic with Dubai.
If you think our price is too high, you can contact me. I can provide you with updated prices or discounts every day.
I can't call you photos. If you have a chance, please look at the quality of our garlic and you will understand.
I hope we have long-term cooperation opportunities.
Dry-type onion peeling machine ,equpit the air compressor ,photo onion peeling machine capacity 50kg-2500kg/hour .
also have other different capacity onion peeling machine according to clients inquired.Onion diameter 30-120mm different model different capacity .
(also have garlic peeling machine for clients )
Garlic peeling production line,help people solve the small garlic peeling problem,high efficient,sanitry,save labors,drying garlic peeling machine ,no-water !
From small capacity to big capacity 50kg-5000kg/hour .
Also have onion peeling machine ,other fruit /vegetable peeling machine .
Fruit seeds removing machine !
welcome order !
Various Fruit Vegetable Peeling Machine Potato peeling machine ,
vegetable fruit peeling machine ,Potato / sweet potato / taro / lotus root / beet root / onion / tomato / Eggplant / kohlrabi / Pumpkin / bergamot/pineapple and so on more than 100kind fruit vegetable can peeling.capacity 1-2T/hour according Size of material and operating speed different capacity .And big size round fruit vegetable also can peeling Wax gourd peeling machine , pumpkin peeling machine and so on about more than 100 kind fruit/vegetable can peeling . Save labour, santary operation ,high efficient!
Also offere vegetable fruit process line /production line ! cleaning vegetable process line !
Fruit vegetable slicing machine ,fruit stone/core removing machine ,garlic peeling machine,onion peeling machine
More than 10kind fruit vegetable peeling machine ,welcome order !
Various kind Vegetable fruit peeling machine ,green walnut peeling machine,Potato / sweet potato / taro / lotus root / beet root / onion /garlic/ tomato / Eggplant / kohlrabi / Pumpkin / bergamot/pineapple and so on more than 100kind fruit vegetable can peeling.capacity 1-2T/hour according Size of material and operating speed different capacity .And big size round fruit vegetable also can peeling Wax gourd peeling machine , pumpkin peeling machine and so on about more than 100 kind fruit/vegetable can peeling . Save labour, santary operation ,high efficient!
Also offer vegetable fruit process line /production line ! cleaning vegetable process line !
PASS is a nonionic polyether silicone surfactant, its super spreading and wetting ability increase droplets coverage and decreases spray volume under lower dosage. The stomatal absorption improves leaves uptake speed of pesticide with PASS, so enhances rain fastness and improves effect of pesticides significantly.
Packing: 100mL, 1L, 20L, 200L, IBC, depend on customers' needs
Agricultural silicone surfactant
Wetting agent
Super spreading agent
Similar to Silwet 408
CAS no.: 67674-67-3
PASS is a super spreading agent for foliar-applied agrochemicals, including herbicides, insecticides, fungicides, plant growth regulators, fertilizers and micronutrients.
As a nonionic surfactant based on polyether modified trisiloxane, PASS performs much better than conventional spray adjuvants in lowering aqueous surface tension and reducing contact angle of spray solutions on leave surfaces.
Outstanding Merits:
- Low surface tension leads to enlarging droplet coverage
- To improve the uptake of spraying solutions by stomatal absorption thus enhance the efficacy and rainfastness
- To save the use of water and agrochemicals
Product Usage:
As a tank mix adjuvant
Dosage: 0.025%-0.1% of the spraying solution, based on the agrochemicals used with, generally 5 ml PASS per 15 liters spray solution is suggested.
Better use the preparation within 24 hours and within a pH range 5-8.
Packing: 1L, 5L, 20L, 200L, IBC
Product Safety, Handling and Storage:
- Transport as non-dangerous goods.
- Tight up and store in a cool, ventilated, dry place.
- Shelf life is 36 months.
Carboxylate-Sulfonate-Nonion Tri-polymer XT-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular.
XT-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular.
Vcycletech XT-3100Â is a good scale inhibitor and dispersant for cool water treatment, it has good inhibition for dry or hydrated ferric oxide. XT-3100 is a all organic dispersant and scale inhibitor,XT - 3100Â has good inhibition for dry iron oxide and hydrated ferric oxide.As a excellent anti-scaling agent, XT - 3100 can also be used as a stabilizer phosphate or phosphonic acid salt corrosion inhibitors
 (Similiar to RohmHaas ACUMER 3100)
Specification:
items index
Appearance Light amber liquid
Solid content % 43.0-44.0
Density (20)g/cm3 1.15min
pH(1% water solution) 2.1-2.8
Usage:
Carboxylate-Sulfonate-Nonion Tri-polymer can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. When used alone, the dosage of 10-30mg/L is preferred. When used in other fields, the dosage should be determined by experiment.
Package and Storage:
200L plastic drum,IBC(1000L),customers requirement. Storage for ten months in shady room and dry place.
Safety Protection:
Acidity, avoid contact with eye and skin, once contacted, flush with water.
Pro-DFM is a new type and high efficient nonionic silicone antifoam emulsion, designed to control bubble in water based pesticide. The product has excellent acid and alkali resistance, chemical stability and shear resistance with faster defoaming speed and longer bubble control effect than the average ones. Different content of this silicone antifoam is available, mainly are 10%, 20%, 30%.The dosage is very small in tank mix of pesticides. For example of 20% content antifoam, it's about 7.5ml Pro-DFM per100L spraying solution.
20kg drum, 200kg drum, depend on customer's demand
A kind of nonionic surfactant,glucose and high alcohols of it are purely natural.Production process and product will not harm the environment.At present,it is mainly applied in various cosmetics,industrial cleaners,cleaners for vegetable and fruit,dish washing detergent,children laundry detergent,children shampoo,adult shampoo and bath foam.In addition,it has been also widely applied as synergist in food emulgator,agricultural pesticide emulsifier,dispersant,pesticide and herbicide.
PASS is a super spreading agent for foliar-applied agrochemicals, including herbicides, insecticides, fungicides, plant growth regulators, fertilizers and micronutrients.
As a nonionic surfactant based on polyether modified trisiloxane, PASS performs much better than conventional spray adjuvants in lowering aqueous surface tension and reducing contact angle of spray solutions on leave surfaces.
PASS into the market in Year 2011, it is the key product , and the best seller among Profirst products listï¼?
Outstanding Merits:
- Low surface tension leads to enlarging droplet coverage
- To improve the uptake of spraying solutions by stomatal absorption thus enhance the efficacy and rainfastness
- To save the use of water and agrochemicals
Product Usage:
As a tank mix adjuvant
Dosage: 0.025%-0.1% of the spraying solution, based on the agrochemicals used with, generally 5 ml PASS per 15 liters spray solution is suggested.
Better use the preparation within 24 hours and within a pH range 5-8.
Packing: 1L, 5L, 20L, 200L, IBC
Product Safety, Handling and Storage:
- Transport as non-dangerous goods.
- Tight up and store in a cool, ventilated, dry place.
- Shelf life is 36 months.
