Reliable and steady outside body, use key-board to operate easily.
Automatic computerized controlling with LCD-display.
It can store many messages and choosing any one to run, without wire waste, easy to operate, and more precise.
Including safety features to allow you operate securely, such as wrong instruction correction, and emergency function, etc.
Product specification:
1) Overall size: W430¡ÁD340¡ÁH250 mm
2) Weight: 35kg
3) Power supply: AC 220V /50HZ AC110V/60HZ
4) Power consumption: 320W
5) Available stripping length: 0.2--30 mm
6) Available cutting length: 0.2-- 99999 mm
7) Cutting tolerance: ¡À (0.2+0.002*L) mm
8) Wire type: PVC,VSF, IK, KV, Teflon, Glass Wire
9) Available wire size: Single wire, AWG # 12-30
10) Bearing: NSK
10) Processing speed: L=100 mm, A=B=3, 90pcs/min.
Product information:
The machine is for processing the coaxial cable.
Semi-automatic, manually feed the cutted cable and step the foot switch for stripping.
Product specification:
Applicable stripping length: 0.1-30mm
Applicable cable diameter: ¦µ0.3--¦µ6.99 (mm)
Blades: 2 pcs blades rotated and movable; 2 pcs blades rotated
Max. stripping steps: 9 Layers
Program: available for storing 50
Power supply: 220V 50~60HZ
Net weight: 15KG
Overall size: 185*485*230 (mm).
Product information:
The machinery outside-shell and parameter are designed with the international technologies. Fully automatic processing project includes wire feeding, cutting, end stripping and crimping.
Advantage: High-precision and high-speed for wire stripping and crimping
Including digital controlling and touch-screen.
PLC control without wire feeder.
Product specification:
1) Overall size: W1300¡ÁD1480¡ÁH1450 mm
2) Weight: 500 kg
3) Power supply: AC 220V
4) Compressed air: 0.5MPa (5Kgf/cm2)
5) Crimping capacity: 19600N (2.0 Tons) * 2 sets low noise type
6) Wire size: 0.05-2.0mm2 (UL1007AWG# 30-14) with OD.3.4mm
7) Capacity: 0.8 sec/pc (in case of min wire length)
8) Available cutting length: 30-- 9999 mm
9) Cutting tolerance: L¡Ü100mm, ¡À(0.5+0.002*L) mm;
L£¾100mm, ¡À(1.0+0.002*L) mm
10) Available stripping length: Item 1: 1.0-10.0mm; Item 2: 1.0-17.0mm
11) Cutting depth: 2mm 100 steps (1 step =0.02mm
12) Power consumption: 2.0KW
13) Detector: with or without wires, wire over-load, wire abnormal variation, pressure dropping, and abnormal wire stripping & crimping.
1íforming diameterú¦íT50¿d¿díT450mm
2ípipe length 500¿d¿d2000mm(no limited, it can make any length )
3íthicknessú¦0.055í¬0.20mm(aluminum), 0.035í¬0.07mm(stainless steel)
4ístrip widthú¦55mm
5íspeedú¦1ú¡100m/min ú¿it can be adjustedú¬
6ísystem controlú¦transducer switch control
7ímain powe1.5kw, 220volt, single phase, 50 hz
Hydraulic iron workers ranging from 60 up to 140 ton, are well engineered machines with punching,angle,section cutting, notching and shearing stations. The machines could be used to cut, punch and notch various section metal materials, such as plate, square bar, round bar, angle, channel and I beam. It is also equipped with a back gauge for cutting.
Model :Q35Y-16 , Q35Y-20, Q35Y-25, Q35Y-30.
150T-200T Aluminium Sheet Rolling Mill
Material: Aluminium Scrap
Finished product: Aluminum sheet width 200mm-940mm, Thick 0.6 ~ 1.6mm,
Output: 150-200 tons per month ,
Medium frequency furnace (1 ton) ,
The main machine: 400 X 1300 two rollers reversible rolling mill ,
Screwdown mode: single stage screwdown drive, manual clutch ,
Screwdown motor: Y 6 N =4.5 KW, 2 units, with screwdown, lifting at the same time .Also can be respectively screwdown, lifting.
Center distance of screwdown worm gear box: A=270mm,
Screw-down adiusting screw S150 X 10, material: 40 Cr,
Screw-down display: screwdown the indicator.
Mechanical alignment guide device before the machine and after the machine Motor 3KW} JZQ250 reducer,
Roll size: 400 X 1300,
Roller specifications 120 X 1300, pitch: 170 H-shaped rolls ,
The electric control cabinet to motor operation box to the cable, electrical wires between the control line and installation accessories by The buyer is responsible for themselves. The equipment lubrication station, the supplier provides pipeline layout, the connecting pipeline under the machine,
The equipment covers an area of 30m X 15m ,
The above technical parameters for aluminum sheet Rolling.
150T-200T Aluminium Sheet Rolling Mill
Material: Aluminium Scrap
Finished product: Aluminum sheet width 200mm-940mm, Thick 0.6 ~ 1.6mm,
Output: 150-200 tons per month ,
Medium frequency furnace (1 ton) ,
The main machine: 400 X 1300 two rollers reversible rolling mill ,
Screwdown mode: single stage screwdown drive, manual clutch ,
Screwdown motor: Y 6 N =4.5 KW, 2 units, with screwdown, lifting at the same time .Also can be respectively screwdown, lifting.
Center distance of screwdown worm gear box: A=270mm,
Screw-down adiusting screw S150 X 10, material: 40 Cr,
Screw-down display: screwdown the indicator.
Mechanical alignment guide device before the machine and after the machine Motor 3KW} JZQ250 reducer,
Roll size: 400 X 1300,
Roller specifications 120 X 1300, pitch: 170 H-shaped rolls ,
The electric control cabinet to motor operation box to the cable, electrical wires between the control line and installation accessories by The buyer is responsible for themselves. The equipment lubrication station, the supplier provides pipeline layout, the connecting pipeline under the machine,
The equipment covers an area of 30m X 15m ,
The above technical parameters for aluminum sheet Rolling.
