Find Verified Coats Suppliers, Manufacturers and Wholesalers

PVC coated tarpaulin fabric, is produced by 100% polyester fabric, double side coated with high quality PVC raw material, to make the vinyl coated fabrics have good waterproofing and all level blockout characters, at the same time, for the application of polyester fabric, it gives good tearing and breaking strength to the PVC coated fabric. It can be produced in different weight and thicknesses, to meet customer requirement.

What is� PVC coated fabric?

PVC coated tarpaulin fabric, is produced by 100% polyester fabric, double side coated with high quality PVC raw material, to make the� vinyl coated fabrics� have good waterproofing and all level blockout characters, at the same time, for the application of polyester fabric, it gives good tearing and breaking strength to the� PVC coated fabric. It can be produced in different weight and thicknesses, to meet customer requirement.


Production process of� PVC tarpaulin fabric:

There are several types of production of� PVC coated fabric material:


Knife coated PVC fabric:

It is liquid PVC spread on high density woven polyester fabric, with a knife above the fabric, keep the top of fabric with same thickness PVC coated, then going to heater and cooler process to solidate the PVC onto polyester fabric.
Main advantages and disadvantages: Higher peeling strength because the liquid PVC has more falling into polyester fabric; at the same time, as the high temperature of the PVC during heating process, the fabric would be a little fragile and it is a little less tearing strength compared to other production process.


Hot melt coated PVC fabric:

It is polyester fabric and PVC film laminated together, during the process, PVC film and the polyester fabric are brushed with strong glue to adhere together, and before laminating, PVC film is heated to semi-melted status, in this case, the peeling strength is strengthened while it has more air tightness compared to knife coating PVC fabric, it is ideal products for inflatables.


Hot laminated PVC fabric:

Hot lamination is a knitted polyester fabric laminated with PVC film under temperature 100-120â??. It is used for temporary tents and awnings.

Feature of TONSON Spray gun series:
ScW99 Low pollution spray gun working efficient +5times save energy 70%, better hoarfrost effect, Width +1. 5%, Smooth surface
ScTS-7P Streak spray gun
ScTS-7P Spot spray gun Spray protrude, flat spot, smooth surface
ScMulti-color spray gun two color above/once
ScW99 Super-particulate optimized gun
ScW99-P High-adhesive spray gun Working efficiency +5 times, Save energy 70%, Save solvent 50%
ScW99-G Gravity optimized gun Optional 400cc transparent cup, Light weight (390kg)
ScW-1-S Suction spray gun attach mixer (enable color to mix well)
ScW-1-G Gravity spray gun attach mixer
ScW-2 Two liquid spray gun (mixes two liquid such as, composite paint material, hardener, then instant harden suitable for FRP. PU)

Metal cutting fluid In actual production, even high-quality metal cutting fluids must be added with a certain amount of bactericidal and algae-removing agents to extend the service life and increase the utilization rate. PSC80626, whether used as a metal cutting fluid additive, a settling agent or a water-based cutting fluid, can accelerate the sedimentation of metal chips, accelerate the separation of water and oil in the cutting fluid, effectively reduce the growth of bacteria, and extend the life of the metal cutting fluid. PSC80626 is used in fully synthetic metal cutting fluids for water machines, and the amount is very small, and the additive formula can be adjusted flexibly. As a settling agent, it is basically consistent with Buckman's Busan 77 in terms of theoretical map test data, which can completely replace this type of product and has a significant effect in actual use.

SECrosslink-3010 single component, low temperature rapid curing, low surface resistance, mainly used in circuit board packaging, composite material shell, plastic shell, aircraft body electromagnetic wave shielding, suitable for jet and screen printing process.
Brand SECrosslink Type SECrosslink-3010
Product name EMI Electrically Conductive coating Appearance Silver gray
Resin types Acrylate Application Electromagnetic wave shield of circuit board package, composite shell, plastic shell, aircraft body
Adhesive force excellent Volume resistivity 75 DB

Paint roller making machine



Outline dimension: 6000mm(l) (h)mm
Diameter: above 28mm
Power: ac380v, 50/60hz
Air supply: 0.6mp
Average production speed: 2000pcs/h


1> the paint roller making machine has the combination of automatically delivering pipes, unconstant twisting, and automatically sealing, etc.
2> the paint roller making machine is equipped with heating(suitable for pp pipe, flame supervision, temperature adjustment) technology.
3> customized production according to different diameter of pipes and different length of production line
4> approximate output is up to 8 meters of wound tubes per minute.It can produce more than 16, 000 pieces of 9-inch rollers per day(8 hours working time). The gas consumption cost of 9 inches rolling brush is only 0.01 rmb.
5> compared with the similar european devices , our machine is cheaper but with high quality, short investment feedback period and low maintenance fee.
6> this paint roller making winding machine needs only one person.


Wooden case

Outline dimension: 3600(l)*1200(w)*1600(h)

Diameter: above 28mm
Length: up to 300mm
Power supply: ac380v, 50/60hz
Air supply: 0.6mp
Speed: up to 1000 pcs/h



1> the paint roller machine is one-off completion of cutting, combing, bevelling, shearing and vacuum cleaning.
2> manufacturing customized device according to different diameter and length
3> the machine only needs one person to operate.

Wooden case

Paintng brush
Medium quality

50% wihte bristle and 50% wihte filaments
black high copy bristle
filaments manufacturer
wholesale filaments
Material:50% wihte bristle and 50% wihte filaments;
Specification: 38MM to 95MM;
Packing: customized;
China White And Black High Copy Bristle, Bristle Mixed Filaments, 50% White Bristle And 50% White Filaments Supplier, Wholesaler

Scraper-8, 1.Material: carbon steel + pp., 2.Specifications: 2" to 5"., 3.Color: black handle., 4.Process: mirror cast., 5.Packaging: pe bag.,

No.7 mini scraper
The product description
1. Material: black plastic handle, mirror behind 304 stainless steel;
2. Specification: 170 mm, blade length 72 mm, handle length is 97 mm.
3. Color: black;
4. Features: decorate, barbecue, flowers;
5. G: single 23.0 g;
6. Packing: pe bag of single packaging, 12 / inner boxes, 24 boxes/carton;
7. Features: lightweight, easy to use;
8.Other:

Black high copy bristle
Material: filaments;
Specification: 38mm to 95mm;
Packing: customized;
Ompany introducttion:
Established in march 25, 1967, pental (holding) group is one of the large-scale groups in china, and mainly engages in manufacturing industry, international transportation and international trade. Currently we have 28 subsidiary enterprises, including "pental eterna brushes & tools making co., ltd. " and "pental eterna plastic enterprise co., ltd.".

Adhering to the corporate spi
rit of "unity, development an d regions around the world. Ranked among the top 500 manufacture and export enterprises in shanghai, our company has taken the lead in our business line in china.

We mainly supply paint bru shes, paint rollers, relative painting tools, decoration tools, daily using brushes, industrial brushes, hand tools, jew elry making tools, light industrial products, and mineral products. They enjoy high quality, well reputation and reasonable prices. Also we can fulfill your oem orders.