Please click here to check who's online and chat with them.

Find Verified Wire Mesh Suppliers, Manufacturers and Wholesalers

Jan-09-19
Supplier From Qingdao, Shandong, China
Sep-30-05
Supplier From Qingdao, Shangdong, China
Jan-09-07
Supplier From Qingdao, Asia, China
Jun-12-07
Supplier From Qingdao, Shandong, China
Dec-30-11
Supplier From Qingdao, Shandong, China
82 Wire Mesh Suppliers
Short on time? Let Wire Mesh sellers contact you.
Feb-13-25
Supplier From Qingdao, China
May-21-18
Supplier From Qingdao, Shandong, China
Dec-20-19
 
1.Introduction: 
The machine is used for making rings automatically. It has functions of accounting ring length, folding one side of ring, seam welding ring and curling another side of ring. The produced rings are used as Chine on both drum ends. This machine is controlled by PLC and inverter. 
2.Technical parameter:
ModelSANHG700

Ring diameter250mm-700mm

Steel band width35-75mm or customerized

Steel band thickness0.5mm
Cutting tolerance+/-0.5mm

Production speed300pcs/hour

Cut off methodPneumatic cutting

Welding methodSeam welding

Power10KW/380V/50HZ/3Phases

Weight2500kg

Dimension2500X2500x1800mm
May-26-11
 
Plastic hand extruder
Model: HJ-30B
Voltage: 220V
Power Of Extruder: 1020W
Power Of Hot Blower: 3400W
Welding Rate: 3KG/5mm
Machine Weight: 4.8.
May-11-09
 
E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength and good notch toughness is required. It is an excellent general purpose welding wire. This wire has very low fume, stable arc, good slag removal and excellent mechanical properties.

AWS Specification: AWS A5.20

AWS Classification: E71T-1

Typical Applications:
Buff and fillet welding of hulls and storage tanks
Structural steel
Farm machinery
Construction equipment
General carbon steel fabrication

Welding Current:
DCEP (Electrode Positive, Reverse Polarity)

Typical Wire Chemistry: (as welded with 100% CO2 shielding gas):

100% CO2 75%Ar/25%CO2
C: 0.05 0.05
Si: 0.56 0.64
Mn: 1.39 1.61
P: 0.008 0.005
S: 0.014 0.01

Welding Positions:
All Positions


Available Diameters: 0.8mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm
Available Spools: plastic spool and metal basket
Available Weight per Unit: 0.9kg, 1kg, 5kg 15kg
May-11-09
Supplier From Qingdao, Shangdong, China
 
Typical Applications:
Typical Wire Chemistry:
C: 0.09
Mn: 0.98
Si: 0.59
P: 0.01
S: 0.012

Welding Positions:
Typical Mechanical Properties (As Welded):
Yield Strength, Mpa: ¡Ý420
Tensile Strength, Mpa: ¡Ý510
% Elongation: ¡Ý22



Available Weight per Unit:
0.9kg, 1kg, 5kg, 12.5kg, 15kg, 20kg, 27kg, 250kg and 350kg.
Available Spools: plastic spool and metal basket
Available Diameters: 0.6mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm
May-11-09
 
Welding electrodee7018 is a low-hydrogen iron powder type electrode that produces high quality x-ray welds. It can be used in all positions on ac or dc reverse polarity welding current. E7018 is recommended for welding medium grade carbon steels, where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional electrodes.

Typical applications:
Low-alloy structures
Low, medium, and high-carbon steels
Offshore rigs and power plants
Steel structures
Tack welds for tubular wire applications

Aws specification: aws a5.1

Aws classification: e7018

Welding current: ac íºc dc en (electrode negative)

Typical wire chemistry:
C: 0.071
Mn: 1.42
Si: 0.53
P: 0.014

Typical mechanical properties:
Yield strength, mpa: ¡Ý420
Tensile strength, mpa: ¡Ý510
% elongation: 30

Welding positions: all positions


Available diameters: 2.5mm, 3.2mm, 4.0mm & 5.0mm

Available packing: small box and carton box
Jul-31-06
Supplier From Qingdao, Shandong, China
 
Pressure gauge
Bouron tube: c style spring pipe (<16mpa)
Screw spring pipe (ª16mpa)
Do not pass 3/4 of the upper limit when measuring the stabilization load, do not pass 2/3 of the upper limit when measuring the wave pressure, and not under 1/3 of the upper measuring limit within 2 kinds of minimum pressure.
Model y-1106
Diameter:40, 60, 100, 150, 200, 250 mm
Precision grade:2.5·+4.01.6·+2.51.0·+1.6
Measuring range:0+0.1 to 0+60/-0.1+0 to -0.1+2.4, 0+0.1 to 0+100
0.1+0 to -0.1+2.4 mpa
Connection thread: m10-1 m14-1.5 m20-1.5
May-27-05
 
Galvanized link chain
Galvanized welding short link chain medium link chain long link chain
Jul-09-22
 
BGA Solder Ball
Product: Solder Ball
Product composition: tin 99.3 copper 0.7
Product size: 13mm 19mm 22mm
customizable
Product weight: can be customized
Solder balls are electrically conductive by using a heating tool to firmly bond two or more metal conductors. Solder balls are a kind of product in solder. Solder balls can be divided into lead solder balls and lead-free solder balls, both of which are used for circuit board soldering. Made of high-purity pure tin, its wettability and fluidity are very good, and it is simple and easy to apply tin. The welded points are bright and full, and there will be no bad virtual welding phenomenon. Adding appropriate antioxidant elements, the antioxidant capacity is greatly improved. Solder balls are mostly used in the processing and production of circuit boards. However, the commonly used solder balls are not uniform in the fusion process of flux and metal, which easily causes metal solution to splash, resulting in short circuit of products, and has a bad impact on the stability of product quality.
Aug-17-18
 
Introduction:
This fridge door gasket welding machine is specially used in welding refrigerator door gasket, rubber gasket, which has the features of compact structure, easy operation and accurate temperature controlling. The heating tube is made of imported materials. One leg period of this machine is about 14 seconds and the leg stretching resistance is higher than the technical standard in the same industry at home and abroad.
Feature:
(1) This machine adopts advanced Omron PLC control system, famous-brand cylinder, and imported electrical parts to keep machine high-automatic, high-efficient, easy operation, long-using time.
(2) This machine can weld 2 gasket corners every time, after welding, it cleans (trims) rest material automatically to keep even, firm and beautiful surface of welding corner.
(3) The welding process is: heating ~ vacuum adsorption ~ welding ~ inner cooling ~ outer cooling ~ automatic outlet.
(4) the welding mould take with vacuum system, and inner cooling system, which can make the gaket corner smooth surfact and the inncer cooling systme can avoid gasket zones stick together.
(5) Photoelectrical protection system is used to protect hands being clamped in operation.
(6) Welding period is 11~14 second/ two corners, the output can reach 600~650 sets per 10 hours.
(7) This machine pass CE certification and export to different countries.
Nov-11-22
 
Solder Bar Factory
Price: $27,220 -- $30,572 / ton
Specification: 0.5kG-1kg /Article,
Type: Lead-free
Packing: 20 kg/box
Low temperature solder bar has low melting point, good reliability, excellent weldability, is designed for customers low temperature operation lead-free low temperature solder bar, is used in the demand for low melting point components industry.It has good wetting effect and brazing strength in welding, and can also be used for lead welding process of simpler components, with excellent conductivity and thermal conductivity, fast tin loading and good wettability.
Element: Sn42Bi58
Certificate: ISO, etc.
Payment method: T/T,Western Union,L/C,etc.
Size: Article 0.5 KG - 1 KG /20 kg/box, Can be customized according to customer needs.
Package: Standard export packing or as required.
Application: It can be used as coating material in food, machinery, electrical appliances, automotive, aerospace and other industrial sectors have a wide range of applications
Jul-05-19
 
1. This machine adopts advanced PLC automatic control system that conquers error of old machine caused by multi electric apparatus; open system adopts OMRON pneumatic element that guarantees stability of process and enhances quality.

2. It breaches many processes of old welder such as manual work for pruning rest material and welding lump and so forth.

3. This welder is double hole full automatic welding equipment; after welding, it cleans rest material automatically; therefore, it guarantee even, firm and beauty of welding angle; the production efficiency is twice of old welder.

4. Mould and frock has up and down layer with adopting precise beeline rail transmission breath that guarantees precision of equipment; the welding way is: automatic heating (firing type) ~ vacuum adsorption ~ welding ~ inner cooling ~ outer cooling ~ automatic outlet.

5. Security protection system: in order to protect pressing, it equips photoelectricity protector before mould with adopting two-hand open button; it adopts HZ12-25 switch; it can open electric case after power failure.

6. Leg period of this welding machine is 11~14 second/double angle; the output can reach 600~650 sets; the stress of welding angle is higher than criterion in same industry.
Jul-05-19
 
1. This machine adopts advanced PLC automatic control system that conquers error of old machine caused by multi electric apparatus; open system adopts OMRON pneumatic element that guarantees stability of process and enhances quality.

2. It breaches many processes of old welder such as manual work for pruning rest material and welding lump and so forth.

3. This welder is single hole full automatic welding equipment; after welding, it cleans rest material automatically; therefore, it guarantee even, firm and beauty of welding angle; the production efficiency is twice of old welder.

4. Mould and frock has up and down layer with adopting precise beeline rail transmission breath that guarantees precision of equipment; the welding way is: automatic heating (firing type) ~ vacuum adsorption ~ welding ~ inner cooling ~ outer cooling ~ automatic outlet.

5. Security protection system: in order to protect pressing, it equips photoelectricity protector before mould with adopting two-hand open button; it adopts HZ12-25 switch; it can open electric case after power failure.

6. Leg period of this welding machine is 11~14 second/double angle; the output can reach 600~650 sets; the stress of welding angle is higher than criterion in same industry.
82 Wire Mesh Suppliers
Short on time? Let Wire Mesh sellers contact you.
See what buyers and suppliers are discussing in Wire Mesh import export community