Find Verified Lubricants Suppliers, Manufacturers and Wholesalers

Aviation turbine engine base lubricating oil (synthetic oil) is a high-performance lubrication base component specially designed for turbine engines (turbojet, turbofan, turboprop, turboshaft). It must pass rigorous certifications such as MIL-PRF-23699 (US military standard), MH/T 6084 (civilian standard), and GJB 135A (national military standard). Its core function is to lubricate bearings/gears, dissipate heat, prevent coking and corrosion, and ensure the stable operation of the engine under extreme conditions ranging from -60to 246.

SEBS is a linear triblock copolymer with polystyrene as the end segment and ethylene butene copolymer obtained by hydrogenation of polybutadiene as the intermediate elastic block. SEBS does not contain unsaturated double bonds, so it has good stability and aging resistance. It is both plastic and highly elastic and can be processed and used without vulcanization. The leftover materials can be reused and are widely used in the production of high-end elastomers, plastic modifiers, adhesives, lubricating oil tackifiers, etc Filler and sheath materials for wires and cables.

polyisobutylene (PIB) character:
Polyisobutylene (PIB) is a colorless, odorless, non-toxic viscous or semi-solid substance.

Polyisobutylene (PIB) Application:
Polyisobutylene (PIB) has important applications in lubricating oil additive, polymer material post-processing, cosmetics and other fields.

5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.

AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.

Alloy grade

Silicon Si

Iron Fe

Copper Cu

Manganese Mn

Magnesium Mg

Chromium Cr

Zinc Zn

Titanium Ti

Zirconium Zr

other

Aluminum AL

new grade

old grade

0.40

0.40

0.10

0.5-0.8

5.8-6.8

0.20

0.02-0.10
each total
5A06
LF6

0.05

0.15

margi

5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.

AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.

Alloy grade

Silicon Si

Iron Fe

Copper Cu

Manganese Mn

Magnesium Mg

Chromium Cr

Zinc Zn

Titanium Ti

Zirconium Zr

other

Aluminum AL

new grade

old grade

0.40

0.40

0.10

0.5-0.8

5.8-6.8

0.20

0.02-0.10
each
total

5A06

LF6

0.05
0.15

margi

What is Methylpyrrolidone?

Methylpyrrolidone, also known as NMP or 1-methyl-2-pyrrolidone). NMP (N-Methylpyrrolidone) highly polar organic solvent used in a variety of industries and applications. Colorless transparent oily liquid with a slight amine odor. It is soluble with water, alcohols, ethers, esters, ketones, halogenated hydrocarbons, aromatic hydrocarbons and castor oil. Low volatility, thermal stability, chemical stability are good, can volatilize with water vapor. It has hygroscopic property. Sensitive to light.

APPLICATION

1. Conductive pastes for lithium-ion battery and carbon nanotubes.
2. Acetylene concentration and extraction of butadiene, isoprene and aromatic hydrocarbons.
3. Lubricating oil refining.
4. Polymer solvents for insoluble engineering plastics (poly(p-phenylene sulfide) , polyimide) and aramid fibers.
5. High-grade paint, ink, pigment.
6. Cleaning agent: deoiling, degreasing, dewaxing, polishing, rust, paint, etc.
7. Artificial kidney function membrane fluid, desalination membrane fluid.
8. Polymer industry, pharmaceuticals, pesticides and other industries.

1.Used as an intermediate in organic synthesis. It is liquid, soluble in organic solvent, slightly soluble in water. It is a low toxicity, high efficiency and broad spectrum anti-mildew agent. It has strong killing effect on mold and can achieve ideal anti-mildew effect.

2.It can be widely used in coating, paint, lubricating oil, shoe polish, leather chemistry, wood products and cultural relics protection and many other products.

Name: Triethanolamine
CAS: 102-71-6
Chemical formula: C6H15NO3
Appearance: colorless liquid

Triethanolamine is a colorless oily liquid with mild odor, easy to absorb water, exposed to air and turning brown under light. At low temperatures, it becomes a colorless or light yellow cubic crystal system.

Application:
1. As a compliant lubricant, it can eliminate friction between metals and help improve the viscosity and solubility of lubricating oil.
2. As a surfactant, it is often used in household cleaning and personal care products such as detergents, cleaners, softeners, etc.
3. As a preservative, stabilizer, and co solvent, it can be used in cosmetics, and food processing.
4. As an oil in water emulsifier, it can be used to prepare various skin lotion and cosmetics.

Product Introduction:
Lauric Acid is used in many applications, including: anionic and nonionic surfactants, and raw material for emulsifiers. Used in the rubber industry as an activator/accelerator/ plasticizer and softener.
Widely used in pharmaceuticals, surfactants, soaps, detergents, cosmetics, daily chemicals.

Product Functions&Applications:

1. Lauric Acid mainly used in the production of alkyd resin, wetting agent, detergent, pesticides, surfactants, food additives and cosmetics raw materials.
2. Lauric Acid used as a surface treatment agent for the preparation of adhesive. It is also used in the manufacture of alkyd resin, chemical fiber oil, pesticides, synthetic spices, plastic stabilizer, gasoline and lubricating oil.
3. Lauric Acid is the raw material for producing soap, detergent, cosmetics, surfactants and chemical fiber oil.

Fatty alcohol polyoxyethylene ether, levelling agent O also known as flat plus O, is a non-ionic surfactant, the appearance of milky white or beige paste, high molecular weight, solid (can be made into flake solid according to the requirements), easily soluble in water, ethanol, ethylene glycol, turbidity point, PH value of 1% water solution is neutral. Resistant to acid, alkali, hard water, heat and heavy metal salt. It has strong evenness, slow dyeing, permeability and diffusivity for all kinds of dyes. It can be used in the same solution with all kinds of surfactants and dyes. Appearance milky white, beige paste or solid shape PH 6-8 turbidity point 91-96

Applicationï¼?
1. As a non-ionic surfactant, the washing industry plays a role in emulsification, foaming, and decontamination. It is the main active ingredient of hand sanitizer, laundry detergent, shower gel, laundry detergent, detergent, and metal cleaning agent.
2. As a textile printing and dyeing auxiliary agent, the textile printing and dyeing industry plays an emulsifying role: emulsified silicone oil penetrating agent, leveling agent, polypropylene oil agent.
3. As a deinking agent, carpet detergent, and resin remover in the papermaking industry.
4. Other products such as pesticide emulsifiers, oil demulsifiers, lubricating oil emulsifiers, etc.

Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis The additive of alkaline battery electrolyte can increase the electric capacity by 12 to 15 and increase the service life by 2 to 3 times
It can be used as an absorbent for carbon dioxide and can purify the air in submarines
The chemical equation is 2LiOHsCO2gLi2CO3sH2Ol
It is used to make lithium salt and lithiumbased grease electrolyte of alkaline battery absorption liquid of lithium bromide refrigerator etc used in petroleum chemical industry light industry nuclear industry etc When used in alkaline batteries the aluminum content is not more than 006 and the lead content is not more than 001 It is used as an analytical reagent a photographic developer and also in the manufacture of lithium it is used as a raw material for the preparation of lithium compounds It can also be used in metallurgy petroleum glass ceramics and other industries
Lithium hydroxide is mainly consumed for the production of lithium greases A popular lithium grease is lithium stearate which is a generalpurpose lubricating grease due to its high resistance to water and usefulness at both high and low temperatures
Carbon dioxide scrubbing
Lithium hydroxide is used in breathing gas purification systems for spacecraft submarines and rebreathers to remove carbon dioxide from exhaled gas by producing lithium carbonate and water
It is used as a heat transfer medium and as a storagebattery electrolyte It is also used in ceramics and some Portland cement formulations Lithium hydroxide isotopically enriched in lithium7 is used to alkalize the reactor coolant in pressurized water reactors for corrosion control

Usage:

1. Clean the tire first;

2. Shake well before spray;

3. Keep 15cm away from the tire when spray;

4. No need to wipe, wait for 5-10 minutes for it to dry.



Storage:

1.Store in a cool, ventilated warehouse.

2.Away from fire, heat source.

3.Storage temperature does not exceed 30 â??, relative humidity less than 80%.

4.Keep container closed.

5.Should alkali metals, food chemicals stored separately, avoid mixing reservoir.

6.Equipped with the appropriate variety and quantity of fire equipment.

7.Stay away from the Children.

Advantages:

1.Can completely purify besmirch &pollution

2.Can prevent the aging of leather,fabric,furniture etc.

3.Eco-friendly

Feature
Metal Lubricant performs anti-rust, lubricating, dehumidifying, decontaminating and eliminating the noise of machinery or other metals, etc., and has a magic effectof uncoiling rust, swiftly looses the rusted screws.
It can be widely applied to the precision instruments, contacting points of electronic appliances, steel accessories and high sensing elements etc.

Advantage
Remove all kinds of rust /magic effect of uncoiling rust /penetrate lubricant oil
extra anti- rust/keep lubricating/Eco- friendly

Application
1. Infiltrates the areas of rust in a short time;
2. Eliminates the noise caused by rubbing between spare parts or movable fittings;
3. Lubricates and protects all kinds of machines, removing humidity and preventing rusting.

Feature
multi-function Anti-rust Lubricant performs anti-rust, lubricating, dehumidifying, decontaminating and eliminating the noise of machinery or other metals, etc., and has a magic effectof uncoiling rust, swiftly looses the rusted screws.
It can be widely applied to the precision instruments, contacting points of electronic appliances, steel accessories and high sensing elements etc.

Advantage
Remove all kinds of rust /magic effect of uncoiling rust /penetrate lubricant oil
extra anti- rust/keep lubricating/Eco- friendly

Theaoson anti-rust agent is composed of aerosol can, aerosol valve, feed liquid and propellant. It contains special molecules to form a protective film on the surface of the material to effectively prevent the contact of moisture and other corrosive substances with the surface of the material, thereby avoiding metal. Oxidation causes corrosion, good penetration and penetration, infiltration of rust, dissolution of sticky materials, anti-rust, lubrication, loose embroidery and other functions.

PFPE KING XZ 3-1 LV is a premium cleaning and dispersion fluid specially developed for use with PFPE lubricants. The formulation is designed to dissolve, disperse, and remove PFPE lubricant residues efficiently while preparing component surfaces for fresh lubricant application. Its excellent compatibility with PFPE lubricants helps improve maintenance efficiency and supports consistent lubrication quality. The product is suitable for cleaning precision mechanical components before lubrication, allowing lubricant residues to be removed effectively without leaving excessive deposits. Clean component surfaces help improve lubricant adhesion and promote the formation of a more uniform lubricating film. PFPE KING XZ 3-1 LV is also suitable for preparing PFPE lubricant dispersions. It assists in creating homogeneous lubricant mixtures that can be applied evenly to precision parts, improving coating consistency and lubrication efficiency.
The formulation features a higher boiling point than standard cleaning fluids, approximately 110�°C, providing a controlled evaporation rate that allows operators additional working time during cleaning and application procedures. The product is supplied as a clear, colorless, odorless liquid, making it easy to use in clean industrial environments. Its transparent appearance also supports convenient visual inspection during application. With a density of approximately 1.72 g/cm�³ at 20�°C, PFPE KING XZ 3-1 LV offers stable handling characteristics and reliable surface coverage during cleaning operations. The fluid is insoluble in water and will not burn under normal operating conditions, making it suitable for a wide variety of industrial maintenance tasks. PFPE KING XZ 3-1 LV helps improve the adhesion of PFPE lubricants on metal surfaces by ensuring that lubrication areas are clean and free from previous lubricant residues. This contributes to improved lubrication performance and longer service intervals.

PFPE KING YM 3-30 N is a premium lubricating oil formulated with high-quality perfluoropolyether (PFPE) base oil for long-term lubrication of friction points involving metals, thermoplastics, and elastomer components. Designed for applications requiring reliable thin-film lubrication, the product combines excellent wetting performance, outstanding ageing resistance, and broad material compatibility to deliver stable lubrication over extended service periods.

The advanced PFPE formulation provides excellent wetting properties, allowing the lubricant to spread quickly and evenly across contact surfaces. This ensures the formation of a thin and uniform lubricating film that helps reduce friction, improve sliding performance, and support smooth assembly processes. The optimized wetting behavior also enables economical lubricant consumption during production.

PFPE KING YM 3-30 N is developed for applications requiring lifetime lubrication. The highly stable PFPE base oil offers excellent resistance to ageing, helping the lubricant maintain consistent physical properties during prolonged operation. This contributes to extended lubrication intervals, reduced maintenance requirements, and improved equipment reliability.

The lubricant demonstrates excellent compatibility with numerous material combinations, including metals, thermoplastics, and many elastomer materials. This wide compatibility makes the product suitable for precision assemblies involving mixed-material contact surfaces. Material compatibility testing under actual operating conditions is recommended before mass production.

PFPE KING YM 3-30 N features a low-odor formulation, making it suitable for applications where operator comfort and clean working environments are important. The product also offers resistance to many commonly encountered chemicals while remaining insoluble in most standard cleaning agents, helping preserve lubrication performance in demanding operating conditions.

Operating within a temperature range of -50�°C to 100�°C, PFPE KING YM 3-30 N maintains stable lubrication performance across a broad range of industrial environments. The lubricant has a density of approximately 1.90 g/cm�³, a kinematic viscosity of approximately 28 mm�²/s at 40�°C, and 4.8 mm�²/s at 100�°C, providing an excellent balance between flow characteristics and lubricating film formation.

PFPE KING P-BARRIERTA I S-402 is a premium perfluoropolyether (PFPE) based high temperature lubricating fluid developed for demanding industrial lubrication applications. Designed with highly refined PFPE synthetic base oil, this lubricant provides outstanding thermal stability, low evaporation characteristics, excellent chemical resistance and reliable lubrication performance under severe operating conditions. The product is suitable for industrial equipment operating under high temperatures, continuous loads and aggressive chemical environments where conventional mineral oils or standard synthetic lubricants may not provide sufficient performance. Its stable molecular structure helps maintain lubrication over extended service periods, contributing to reduced maintenance intervals and improved equipment reliability.
PFPE KING P-BARRIERTA I S-402 offers excellent resistance to oxidation and thermal degradation. Even when exposed to elevated temperatures, the lubricant maintains consistent viscosity and lubricating performance, making it suitable for equipment requiring long-term operation. Its low volatility minimizes lubricant loss at high temperatures while helping maintain stable lubrication films on moving components. This characteristic also makes the product suitable for applications where clean operation and low residue formation are important.
The PFPE formulation demonstrates broad compatibility with many engineering plastics and elastomer materials commonly used in industrial machinery. This allows the lubricant to be applied in equipment containing plastic gears, seals, guides and other polymer components. Compatibility testing under actual operating conditions is still recommended before large-scale use.
PFPE KING P-BARRIERTA I S-402 performs effectively across a wide operating temperature range from approximately -25�°C to +260�°C. This enables smooth equipment operation during both low temperature start-up and continuous high temperature service.

ntroduction:
Ethoxylated hydrogenated castor oil (PEG-40 hydrogenated castor oil) is a combination of synthetic polyethylene glycol (PEG) with natural castor oil. Ethoxylated hydrogenated castor oil can be used to emulsify and solubilize oil-in-water (o/w) emulsions.
Application:
Hydrogenated castor oil plays the role of thickening, hardening and sustained release in preparations, so it is used as a thickener, hardener and sustained release agent for the preparation of semi-solid preparations and solid preparations, such as ointments, suppositories, pills, tablets, etc. In ointments, creams and suppositories, it is mainly used as a hardener of the paste to adjust the consistency of the preparation; in oral preparations, it is mainly used to prepare sustained-release tablets and capsules, and can be used as a coating film or to form a solid skeleton to play a role in sustained or controlled release; it can also be used as a lubricant for tablets and capsules to improve the fluidity of particles.

Powder Glue, construction adhesive heat resistant tile adhesive

Porcelain Tile Adhesive is also known as the ceramic tile or ceramic tile adhesive glue, points type, polymer type, heavy brick, is a newly developed products, mainly used for stickup ceramic tile, brick, tile and other decorative materials, widely used in internal and external walls, floor, bathroom, kitchen, and other places of building the veneer of decoration.

1.Product Description:
Product Name : BE GOOD Strong Adhesion� Tile Adhesive
Type : Strong Adhesion Type
Color : Grey / White
Package : 20kg/bag
Application : Tile Adhesive
Reference Usage : 2-5kg/ m
Mixing Ratio Powder : Water = 20kg : 5 liters
Pot Life : 4 hours
Application Temperature : 5 - 40
Packaging Details: 20kg/bag  / 72bags/pallet / 20pallets/20GP  /1360 bags/1*20GP
Payment: TT
Delivery date: 10 to 15 working days.
Original country: China

2. Features
1) Strong adhesion and elasticity.
2) Pasting layer is thin and even, and hardly with hollowness.
3) Easy and simple application, no need to pre-moisturize the bricks and walls.
4) Excellent waterproofing performance. Adoption of scraper method will speed up the tiling.

3. Application Range
1) Suitable for interior and exterior use.� 
2) Suitable for substrate made from concrete, masonry, pre-cast material and lightweight brick.
3) Suitable for walls, floors and roofs of architects, such as tunnels, bridges, basement, kitchen, bathroom, balcony, swimming pool and reservoir and so on.
4) Suitable for architects with structure which might easily vibrate and split, such� as post-cast strip, pipe orifice.

SPECIFICATION:90mm*5mm*5mm
PACKAGING TERMS: 1000PCS/BAG

Calcium chloride has strong hygroscopicity, so it can be used to make desiccant. It has great value in food manufacturing, building materials, medicine and biology. At the same time, it is widely used in industry and medicine.
Use;
1. It is used as a multi-purpose desiccant, such as drying nitrogen, oxygen, hydrogen, hydrogen chloride, sulfur dioxide and other gases. As a dehydrating agent in the production of ethanol, ester, ether and acrylic resin, calcium chloride aqueous solution is an important refrigerant for refrigerator and ice making. It can accelerate the hardening of concrete and improve the cold resistance of building mortar.
This is a good building antifreeze, which can be used as port defoamer, road dust collector and fabric flame retardant. It can be used as a protective agent and refining agent in aluminum magnesium metallurgy. It is a precipitant for the production of lake pigments. It is used for deinking waste paper and is also the raw material for the production of calcium salt.
2. It can be used as chelating agent, curing agent, calcium fortifier, refrigeration refrigerant, desiccant, anti caking agent, antibacterial agent, pickling agent, tissue modifier, etc.
3. It can also be used as desiccant, road dust collector, defoamer, fabric flame retardant, food preservative, calcium salt, etc.
4. It can be used as lubricating oil additive.
5. Used as analytical reagent.

Description:
This product is a variety of resin processing internal lubricant, non-toxic, with water resistance and good thermal stability. Mainly used for PVC transparent soft and hard extruded, injection molding, calendering products. The product is also very effective for the processing properties of modified vinyl chloride-vinyl acetate copolymers, polystyrene, nitrile rubber, etc. It can also be used as a lubricant for fabrics, waterproofing agents, additives for lubricating oil, and base materials for cosmetics.
Application:

It is a good performance lubricants for PVC to improve the free flow and non-viscous of the PVC molecules
It has water resistance and good stability

Industrial equipment Brazed plate heat exchanger is a new type of high-efficiency heat exchanger made of a series of metal sheets with a certain corrugated shape stacked and brazed. Thin rectangular channels are formed between various plates, and heat is exchanged through the plates. Compared with the conventional shell and tube heat exchanger, its heat transfer coefficient is much higher under the same flow resistance and pump power consumption, and it has a tendency to replace the shell and tube heat exchanger within the applicable range.

Applications:

Refrigeration: used as condenser and evaporator

b. HVAC: intermediate heat exchangers used in conjunction with boilers, intermediate heat exchangers in high-rise buildings, etc.

c. Chemical industry: soda ash industry, ammonia synthesis, alcohol fermentation, resin synthesis cooling, etc.

d. Metallurgical industry: heating or cooling of aluminate mother liquor, cooling of steelmaking process, etc.

e. Machinery industry: cooling of various quenching fluids, cooling of reducer lubricating oil, etc.

Design Parameters

Flow range: 1-2000 m3/h

Working pressure: vacuum-8.2MPa

Operating temperature: -195-538C

Interface size: 1"-DN300 welding, flange, thread and other connection forms

Corrosion resistance: Welding seal without rubber gasket, choice of various metal and alloy materials, super corrosion resistance, longer service life.

Application field:

Crude oil, natural gas purification and chemical products; chemical industry; pharmaceutical and specific chemicals; injection control systems;

HVAC, district heating, thermal power plants; food processing; cooling tower heat recovery

Process requirements

Pickling temperature: Raising the pickling temperature is conducive to improving the descaling effect. If the temperature is too high, it will aggravate the corrosion of the pickling solution to the heat exchanger plates. Through repeated tests, it is found that the pickling temperature should be controlled at 60.

2) Concentration of pickling solution: According to repeated tests, the pickling solution should be prepared according to the concentration of formic acid 81.0%, water 17.0%, buffer 1.2%, and surfactant 0.8%, and the cleaning effect is excellent.

3) Pickling method and time: The pickling method should be carried out by a combination of static soaking and dynamic circulation. The pickling time is static soaking for 2h first, and then dynamic circulation for 3~4h. During the pickling process, samples should be taken frequently to test the pickling concentration. When the difference between the two adjacent test concentrations is less than 0.2%, the pickling reaction can be considered to be over.

4) Passivation treatment: After pickling, most of the scale and metal oxides on the surface of the plate heat exchanger will be dissolved and fallen off, exposing new metal, which is very easy to corrode. The sheet is passivated.

Features
Contact cleaner can effectively dissolve and remove dirt, with a fully evaporate, leaving no trace, no corrosion to metal surface features, this product is non-toxic, no bad odour, can prevent the electrical failure, improve the running state of the electrical components; In turn the power off situation effectively remove the dust on the precision electronic instruments and other equipment, oil, moisture, facing the electrostatic, the harmful material such as metal powder, prolong the service life of equipment, is to ensure the precision electronics equipment in the best working state of efficient protectant.

Application
Is mainly used in electronic circuit boards, relays, switch off, the circuit connection, generator, motor controller, program-controlled switches, numerical control equipment, computer, card telephone, signal, miniature bearing, and So on all kinds of precision electronic equipment maintenance and maintenance.

FEATURES
This product can eliminate the original metal surface due to the formation of the chemical reaction of rust spots and high-temperature oxide, the chemical erosion caused by the metal on metal devices on the device catching and rust die such phenomena, but also to prevent the corrosion of metal equipment and parts, with a high infiltration, loose rust and other functions, is the effective maintenance and repair of various equipment assistant.



APPLICATION
This product is widely used in vehicles, ships, construction machinery, agricultural machinery, electronics, electrical equipment such as theinconvenience caused due to rust.

Brake parts cleaner is composed of aerosol can, aerosol valve, material liquid and propellant, which can effectively clean the dust and oil of brake parts, maintain the braking performance, and eliminate the noise generated during braking.

Features
Fast evaporation, no residue l Quick cleaning
No corrosion to base material l safety and eco-friendly

Application
Mainly used for cleaning brake parts of automobiles, motorcycles and bicycles.

FEATURES
Carburetor cleaner is composed of aerosol can, aerosol valve, liquid material and propellant, which can effectively remove the deposits such as colloid, oil sludge, paint film, etc., restore the good state of the carburetor and enhance the combustion efficiency. Solve the problem of unstable engine idling and difficult starting.



APPLICATION
It is mainly used for cleaning carburetor, fuel injection nozzle, spark plug, throttle valve and other parts of automobiles and motorcycles. It can also be used for cleaning metal parts such as engine appearance and chain.

It can effectively remove gum, sludge, varnish and other deposits, restore carburetor to good condition and enhance combustion efficiency. Solve the problem of unstable engine idle speed and difficult starting.

Theaoson tire cleaner is a water-based formula that integrates penetration, cleaning, retreading, and protection of tires at one time. It is rich in cleaning foam and can effectively remove grease and dirt on tires, and can effectively prevent tires from aging and cracking. It is suitable for car tires, bumpers, rubber edges, etc. After use, it can restore the black luster of car tires and restore it as new.

Zinc oxide (ZnO), commonly known as zinc white, is an oxide of zinc. Insoluble in water, soluble in acids and strong bases. Zinc oxide is a common chemical additive, widely used in plastics, silicate products, synthetic rubber, lubricating oil, paint coatings, ointment, adhesives, food, batteries, flame retardant and other products in the production. Zinc oxide has large band gap and exciton binding energy, high transparency, excellent luminescence performance at room temperature, and has been used in liquid crystal display, thin film transistor, light emitting diode and other products in the field of semiconductor. In addition, microgranular zinc oxide as a kind of nanomaterial also began to play a role in related fields.

Shield tail grease is a uniform paste made with grease as the main agent and adding fiber, tackifier, filler and other additives. It mainly plays the functions of sealing, waterproofing, lubrication and anti-corrosion. Shield tail grease is divided into two types: hand-applied grease and pumped grease. Hand-applied grease is used during the launch, and pumped grease is used during the propulsion process.

Application:
1. Good adhesion;
2. Good water resistance;
3. Good water tightness;
4. It has good pumpability in a wide temperature range.

Bleaching Earth is very suitable for refining vegetable and animal oils and fats, moreover for finishing and/or reprocessing paraffins and waxes and industry oil.
Application:
Purified, clarified and bleaching vegetable oil such as soybean oil,Palm oil,palm-kernel oil,rapeseed oil,Peanut oil,sunflower oil,corn oil,and cotton seed oils,ricebran oil,and animal fats
Decoloration daily chemical industry,fancy soap,wax.
Decoloring and refining industry oil(including lubricating oil, diesel oil,grease,Kerosene,white oil,biodiesel oil)
Paraffin,naphthene acid and etc.
Separate olefin in arene and alkene,petroleum schizolysis,polymerization and catalysis of olefin.
Grease industry(including lubricating oil, diesel oil)
Medicament industry.
Chemical industry

Snow spray also known as artificial snow. Under the condition of certain temperature and humidity, the snowmaking machine high pressure water through the nozzle after the formation of tiny mist, at the same time the high pressure generated by the air compressor air is mixed with high pressure water and the nuclear device nozzle produce seeds snow grains, as a result of the action of high power fan, these seeds snow grains and tiny water spray nozzle in the process of mass ejection combination, formed the flakes. We need make sweet romance action, highly effective make happy atmosphere to orgasm.

Advantages
1.Strong adhesiveness
2.Spray continuously
3. Easy washable
4. High extrusion rate
5. nonflammable, eco-friendly

Application

This product is used for all kinds of festive occasions, such as birthday party, civic party, wedding, the Spring Festival, dance party, celebration, party, etc. Can also be combined with all kinds of mold injection on glass, wall, door cabinets, etc.

Product Description

Introduction: Fatty alcohol polyoxyethylene ether (AEO), also known as polyoxyethylene fatty alcohol ether. It is the fastest developing and largest dosage of nonionic surfactants. This type of surfactant is an ether formed by the condensation of polyethylene glycol (PEG) and fatty alcohol, which is represented by the following general formula: RO (CH2 H2O) NH, where n is the degree of polymerization, and there are different varieties due to different degrees of polymerization of polyethylene glycol and types of fatty alcohol. The trade name is Brij. For example, Brij30 and Brij are condensed from different amounts of polyethylene glycol and lauric acid, and they can all be used as O/W emulsifiers.
Application

Application: 1. As a nonionic surfactant, the washing industry plays the role of emulsification, foaming and decontamination. It is the main active ingredient of hand sanitizer, laundry detergent, shower gel, washing powder, detergent and metal cleaner.
2. Textile printing and dyeing industry, as textile printing and dyeing auxiliaries, plays an emulsifying role.
3. Paper industry is used as deinking agent, carpet detergent and resin remover.
4. Others such as pesticide emulsifier, cr ude oil demulsifier, lubricating oil emulsifier, etc.
AEO3(MOA3) can be used as water-in-oil emulsifier, and it is the main raw material for efficient detergent sodium fatty alcohol polyoxyethylene ether sulfate (AES).
AEO7 can be used as disinfectant, degreasing agent and raw material of laundry detergent.
AEO9 is mainly used in wool detergent, degreasing agent for wool spinning industry, fabric detergent and active components of liquid detergent.
Generally used as emulsifier in industry.

Introduction:
1H-Benzotriazole is bitter, odorless, the boiling point is 204 C (15mmHg), soluble in alcohol, benzene, and dimethylformamide, and slightly soluble in water.
It's mainly used as rust-preventer, anti-freezing liquid, antioxidant additive(including lubricating oil, hydraulic oil, brake oil, transformer's oil), emergent, water stabilizer, the additive for high molecular materials (polyester and polyesteramide) capacity of ultraviolet resistance and anti-static electricity, photographic antifogging agent, copper mine flotation, metal's slow corrosion, etc.

ATL activated bleaching earth are highly active adsorbents of premium quality produced from natural bentonites or attapulgite by acid activation where their high level of absorption, acidic properties and their ion exchange ability are critical importance.
Purified, clarified and bleaching vegetable oil such as soybean oil,
Palm oil,palm-kernel oil,,rapeseed oil,Peanut oil,sunflower oil,corn oil,and cotton seed oils,ricebran oil,and animal fats
·Decoloration daily chemical industry,fancy soap,wax.
·Decoloring and refining industry oil(including lubricating oil, diesel oil,grease,Kerosene,white oil,biodiesel oil)
Paraffin,naphthene acid and etc.
Separate olefin in arene and alkene,petroleum schizolysis,polymerization and catalysis of olefin.
Medicament industry.
Chemical industry

FEATURES
This product is consist of varieties of organic solvents, thickeners and additives, having the advantages of simply operating, high paint removing efficiency, no corrosive to metals. Its suitable for removing: oil based paints, such as self-drying alkyd paint, nitric paint, acrylic paint and a few epoxy and cold curing bi-component paints.


APPLICATION
Its suitable for removing: oil based paints, such as self-drying alkyd paint, nitric paint, acrylic paint and a few epoxy, ect.

Physical and chemical properties Calcium hydroxide (calcium hydroxide), an inorganic compound, chemical formula Ca(OH)2, commonly known as slaked lime or hydrated lime. It is a white powdery solid. After adding water, it presents two layers, the upper aqueous solution is called clear lime water, and the lower suspension is called lime milk Chemicalbook or lime slurry. The upper clear liquid clear lime water can be used to test carbon dioxide, and the lower turbid liquid lime milk is a building material. The solubility of calcium hydroxide decreases with increasing temperature. It is insoluble in alcohol, soluble in ammonium salts and glycerol, and can react with acid to generate corresponding calcium salts. At 580â??, it decomposes into calcium oxide and water
Calcium hydroxide is a strong base with bactericidal and antiseptic capabilities, and has a corrosive effect on skin and fabrics. However, due to its low solubility, the degree of harm is not as great as strong bases such as sodium hydroxide. Calcium hydroxide is widely used in industry. It is a commonly used building material, and is also used as a bactericide and chemical raw material.
White powder with fine chemical properties. Used in the manufacture of bleaching powder, water softener, water disinfection clarifier, and construction industry. Used in pharmaceuticals. Can be used as an additive in rubber and petroleum industries. Used in lubricating oil to prevent coking, sludge deposition, neutralization and corrosion. Can also be used as a water softener, disinfectant, antacid, etc. Used as an analytical reagent, carbon dioxide absorbent, and also used in organic synthesis. Used in the manufacture of bleaching powder, water softener, depilatory, disinfectant, antacid, astringent and various calcium salts. Used in the inspection of carbon dioxide, gas absorption. Leather depilation, insecticide, water treatment.

The professionally designed stainless steel roller combined with the movable tightening baffle makes the on-site disassembly and assembly of the heat exchanger fast and convenient, and can effectively reduce the wear of the load on the upper guide rod,
and the roller body is not easy to induce, thus preventing the occurrence of locking. Reliable operation, high efficiency, environmental protection, space saving and convenient maintenance are the basic and harsh requirements for current
ships and marine engineering equipment. More than 30 varieties of heat exchangers ensure that the requirements for various working conditions of marine heat exchangers (central cooler/jacket water cooler/lubricating oil cooler/fuel oil cooler/air conditioner, etc.) The efficient solution ensures the normal operation of the ship's cooling system for a long time.

The optional configuration of heat exchanger accessories (interface metal flanges, marine pressure and temperature gauges, post-insertion filters, etc.) also provides a user-friendly service for shipyards and shipowners.

Features:

Advanced board pattern design, high efficiency and environmental protection.

Compact structure and small footprint.

Excellent sheet, high reliability.

Good and reliable seal with less leakage.

After-sales service system, maintenance is assured.

Application range:

Capacity range: 0.1m3/h to 3000m3/h

Operating pressure: 1.6MpaG

Operating temperature: 150

Plate Material: Stainless Steel 304, 316L, Ti, Ti-Pd, 904L, SMO254, Hastelloy, Nickel Ni

Gasket material: NBR, EPDM, HNBR, FKM (VITON-A, VITON-B, VITON-G), etc.

Granule fuller earth is premium attapulgite granule; it is suitable for refining and processing industry oil, such as aviation turbine kerosene.
Properties:

Particle size 20-40 mes

30-60 mesh

(8-16mesh)

ï¼?40-120 meshï¼?

Moisture content: <12%

PH value: 5-7

Free acid(calculated as H2SO4) % <0.2

Decolorization ability % 85

Application:

Used for recycling and regeneration of industrial waste oil,such as machine oil, lubricating oil,used engine oil, wasted kitchen oil etc.
Used for decoloring, refining and purifying industrial oil, such as lubricating oil, diesel oil, paraffin wax, gasoline, grease, kerosene, Aviation kerosene, white oil, Biological Diesel Oil

Textile Cord Fuel Oil Hose FS300 Smooth Surface

Rubber fuel oil hoses, Flexible Reinforced oil Hoses, reinforced fuel tubing. fuel oil pipeline, Oil delivery rubber hose, oil resistance rubber hose, oil resistance rubber hose with Fiber reinforced.Suitable for transportation of gasoline, kerosene, diesel, engine oil, and lubricating oil .

Construction:

Inner Tube:Black Extruded NBR rubber

Reinforcement:High tensile synthetic textile braided

Cover:Black Extruded smooth NBR- abrasion and ozone resistant rubber

Working Pressure:Constant Pressure 20 Bar / 300 psi

Temperature Range:-30 +80 (-22 F 176 F)

Application:The smooth surface fuel oil hose was widely used to all the industrial equipment and device to delivery the gasoline, diesel, fuel oil.

We are a leading manufacturer and supplier of fuel oil rubber hose in China. We can supply a wide range of fuel oil hoses that are great for general purpose fuel and oil delivery, including petrol and diesel.Fuel Oil is for the transfer and delivery of fuel oil and petroleum products for home delivery, commercial and industrial service .Fuel Oil has two textile braids. The braided construction reduces kinking and twisting when reeling. The smooth cover has low drag resistance.

Fuel Oil Rubber Hose

Other name: Rubber fuel oil hoses, Flexible Reinforced oil Hoses, reinforced fuel tubing. fuel oil pipe line, Oil delivery rubber hose, oil resistance rubber hose, oil resistance rubber hose with Fiber reinforced

Before you start your engines, equip them with Sinopulse fuel hoses. We have engineered our fuel line hoses at the cutting-edge of fuel-efficient, environmentally-safe design, so your engine will perform with superior power.

Hose Type: Extruded Smooth.

Application: Soft wall hose for low pressure lines, return lines, and drain lines. Used in fuel system or in the crankcase of internal combustion engines in mobile (truck, bus, off highways vehicles), stationary and marine applications.

Temperature: -40 to 100

Tube: black, smooth,nitrile rubber

Reinforcement: high tensile synthetic yarn braided or spiraled high tensile textile plies.

Feature

Mandrel extrusion technology

Free OEM Color & Brand Service

Packing as customer request

Rubber fuel oil hoses, Flexible Reinforced oil Hoses, reinforced fuel tubing. fuel oil pipe line, Oil delivery rubber hose, oil resistance rubber hose, oil resistance rubber hose with Fiber reinforced.Suitably for transportation of gasoline, kerosene, diesel, engine oil, lubricating oil .

Construction:

Inner Tube:Black Extruded NBR rubber

Reinforcement:High tensile synthetic textile braided

Cover:Black Extruded wrapped NBR- abrasion and ozone resistant rubber

Working Pressure:Constant Pressure 20 Bar / 300 psi

Temperature Range:-30+80 (-22 F 176 F)

Application:The wrapped surface fuel oil hose sizes up tp 2, was widely used to all the industrial equipment and device to deliver the gasoline, diesel, fuel oil.

We are a leading manufacturer and supplier of fuel oil rubber hose in China. We can supply a wide range of fuel oil hoses that are great for general purpose fuel and oil delivery, including petrol and diesel.Fuel Oil is for the transfer and delivery of fuel oil and petroleum products for home delivery, commercial and industrial service .Fuel Oil has two textile braids. The braided construction reduces kinking and twisting when reeling. The smooth cover has low drag resistance.

Fuel Oil Rubber Hose

Other name: Rubber fuel oil hoses, Flexible Reinforced oil Hoses, reinforced fuel tubing. fuel oil pipe line, Oil delivery rubber hose, oil resistance rubber hose, oil resistance rubber hose with Fiber reinforced

Before you start your engines, equip them with Sinopulse fuel hoses. We have engineered our fuel line hoses at the cutting-edge of fuel-efficient, environmentally-safe design, so your engine will perform with superior power.

Hose Type: Extruded Smooth.

Application: Soft wall hose for low pressure lines, return lines, and drain lines. Used in fuel system or in the crankcase of internal combustion engines in mobile (truck, bus, off highways vehicles), stationary and marine applications.

Temperature: -40 to 100.

Tube: black, smooth,nitrile rubber

Reinforcement: high tensile synthetic yarn braided or spiraled high tensile textile plies.

Feature

Mandrel extrusion technology

Free OEM Color & Brand Service

Packing as customer request

4 STEEL WIRE SPIRAL HYDRAULIC HOSE DIN EN 4SH
Construction:
Hydraulic Hose Tube: Oil resistant synthetic rubber,NBR.
Reinforcement: Four high tensile steel wire spiral layers.
Cover: Abrasion and weather resistant synthetic rubber, MSHA accepted.
Temperature: -40 to +125

Introduction:
We have a large hydraulic hose range in the market, which are available with the most abrasion-resistant covers. As marketing-leading hydraulic hose manufactures, we offer a a range that can deliver high performance and can withstand the harshest working environments. Our hoses are designed to perform in both high and low temperatures and pressures and are suitable for a variety of applications. Each of our hydraulic hoses are also in compliance with stringent industry standards such as SAE 100 and DIN.We also have ISO and MSHA certificate. Hydraulic Hoses are used for high pressure fluid power applications on mobile and fixed machinery. Our reinforced hoses can fit a wide variety of adapters and fittings.Our hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. Hydraulic hoses handle high pressures in a wide range of fluid-power applications. From agriculture and manufacturing to all variety of heavy equipment operations, Manufactured to meet all applicable SAE specifications, Sinopulse hydraulic hoses are an affordable alternative to other brand hoses.We can also make hydraulic assembly for customers. Our Finished Assemblies are lengths of hydraulic hose with crimp fittings pre-attached. Customize the type of hose, length, and fitting to create the perfect assembly for your project.

pump jack oil A10VS0100DR/31R-PPA12N00 for Rayalaseema power
Relying on the profound industrial heritage of Deyang, Sichuan, YOYIK focuses on the innovative manufacturing of power generation equipment and accessories. The company not only has a modern production line, but also pays more attention to the training and introduction of talents. It has brought together a group of technical experts from well-known power station projects. They have integrated their valuable experience into product design and production, so that YOYIK's products always maintain an industry-leading position in performance and durability. From conventional accessories to customized solutions, YOYIK can always meet the diverse needs of customers.


#DF-pump jack oil A10VS0100DR/31R-PPA12N00-DF
hydraulic pumps for sale PVH074R01AB10A2500000
Joint CSHM 14Ã??1.5
Manual pressure regulating valve EXCELON B72G-2GK-QD3-RMN
Seal/O-ring WJ01.37.022
Resistant fuel recirculation pump oil seal DF-F3-1C-20-011
Keeping valve 167DA-13/CB 25-50PSI
LUBE OIL PUMP BKH-20SR-4425-FPM1.4571(DN16 PN400bar)
DOUBLE ENTRY IMPELLER with IMPELLER SLEEVE HZB200-430-01-03+HZB200-430-01-04
manual shut off valve NKJ61H-16C
Seals WD10*1-1/8"
The electromagnetic valve 4WE6Y61/EW22050NZ5L/V
check valve FPR12 0.5
EH oil Circulating pump motor 2PB26DG28PI-V-VS40
centrifugal pump stainless steel DFBII 125-80-250
Shaft seal 589332-00G
Coil+Bracket 3YV
hydraulic pump station 125LY-23-2
pressure hose SMS-12-610mm-B
Pressure regulating valve MNRï¼?0821300930
Scroll bearing 40 (7)84103
pressure joint smk20-m10x1-va
globe valve high pressure LJC50-1.6P
shaft DG600-240-03-01
AST control block JZPK001
pressure hose S110-AC-FA-0125
sealing ring HB4-5618-2B
solenoid valve HQ16.07Z-3
pressure relief valve YSF9-70/80-TH
Skeleton oil seal ZJCR-9 NBR
casing wearing 326*340*38
Solenoid valve of coal mill oil station 4WE10D33/OFCG220N9K4
pump jack oil A10VS0100DR/31R-PPA12N00

pump jack oil A10VS0100DR/31R-PPA12N00

MY-DFYL-2024-7-2

Universal lubrication oil added funnel is suitable for 98% car models to added Oil.

Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.

options:
The TIS lubricator and riser section range is available with the following options :
3" ID to 9" ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 �°C
Choice of quick union or API flanged connections
Choice of bleed port connections

-

Classification:
Carboxylic Acid
CAS No.:
112-80-1
Other Names:
antiwear additive
Place of Origin:
Liaoning, China
Grade Standard:
Industrial Grade
Purity:
99.7%
Appearance:
liquid, Liquid 25�¢?? Conform
Application:
diesel antiwear agent
Brand Name:
DLDP
Model Number:
DLDP
Colour(Fe-Co):
5 Max
Acid Value(mgKOH/g):
185-210
Iodine Value(gl2/100g):
144 Min
Saponification Value(mgKOH/g):
186-211
Solidifying Point():
-12 Max
Moisture(%):
0.3 Max

450ml anti rust lubricant
24 pcs/carton
OEM is accepted
we want to establish long term cooperation with customers
welcome inquiry