Please click here to check who's online and chat with them.

Find Verified Ceramic Filters Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : -   Shenzhen   Shanghai  
Sep-26-09
 Inquire Now  
Operating principle
Driven by the main shaft, the filtering plate rotates to the direction of scraper. Under effect of vacuum system (vacuum pump, filtrate tank, distributor and relevant pipes), the filtering plate below slurry level absorbs the slurry while the filtering plate from slurry level to scraper makes the material (absorbed on it) dry. The filtrate goes into filtrate tank where from it is drained through discharge system (filtrate pump and relevant pipes). When the filtering plate reaches the position of scraper, the cake is taken off by scraper and then given through discharge chute onto conveying belt. After discharge of material, the filtering plate is cleaned in the way of reverse flowing (cleaning takes place once after each circle of rotation). So a few of residue caused by clearance between filtering plate and scraper is cleaned out, and the function of filtering plate is restored during operation.

After certain time (normally, 7 hours), it is necessary to clean the filtering plate by means of detergent (normally, it is nitric acid depending on characteristics of material) and ultrasonic. So the materials & foreign matters stopped in pores of filtering plate or absorbed on surface of filtering plate are cleaned out, and the function of filtering plate is restored during operation.

The ceramic filter adopts PLC full-automatic control system. Both full-automatic operation and manual operation are possible to provide flexibility & convenience.

Features and Applications
Compared with traditional filters, it is featured in energy saving, high efficency, low production cost, high automation level, low power consumption, low moisture of filter cake. More importantly, the low suspended solids in filterate enables the ceramic filter easily meet the discharge standards, and customers can use it as circulation water without discharge it outside.
It is extensively used for solid liquid separation in such industries as ore beneficiation, metallurgy, chemicals, paper making, coal, environmental protection and so on.
Sep-26-09
 Inquire Now  
Operating Principle
By utilizing the production technology of our patent, the filtering plate consisting of two pieces of cavity-structures which is produced mainly by using corundum-based material. The process include raw-material classification, cleaning & selecting, mixing, high-accuracy molding through die stamping, stage-wise high-temperature roasting, repetitious painting of function layer, cleaning & choosing, finalizing gluing, performance testing, packing and placing in storehouse.

Repetitious roasting and layer-after-layer painting are adopted. Thus, the arrangement of pores (interior is big, exterior is small) is clear; The resistance at restoring of filtering plate's function is small; The cleaning of filtering plate is easy; The surface layer is of high strength and wear-resistant. The two pieces of cavity-structures are glued together using epoxy glue imported. The gluing is of high strength and is corrosion-resistant & wear-resistant.

Features and Applications
The ceramic filtering plates produced by our plant have been proved as successful in many beneficiation plants treating ores of copper, lead, zinc, iron, silver, sulfur, gold etc. The filtering plates are of high strength, easy to be cleaned for restoring of plate function. The maximum pressure for reverse cleaning reaches 0.3MPa that increases the performance of reverse cleaning & combined cleaning and raises remarkably the operation indexes of the filter. The service life of the filter exceeds 2 years that saves the investment & operation cost of customer.
Sep-25-14
Supplier From Haidian, Beijing, China
 Inquire Now  
Vacuum ceramic filter is a new type of solid-liquid separation machine which is featured in energy-saving, high efficiency, low production cost, high automation level, smooth operation, low power consumption, low moisture of filter cake, low suspended solid and appears in the 1980s. It¡¯s extensively used for solid-liquid separation in such industries as ore beneficiation, metallurgy, petro-chemicals, paper making, coal, environmental protection and so on.
Working principle: under the effects of pressure difference, as the slurry penetrates filter media, particles are blocked at the surface of filter media and filter cake is formed while liquid goes through the media and drained away so as to separate solid from liquid.
Vacuum ceramic disc filters are the solid-liquid separation equipment, used to dewater mineral concentrates and


Tba
Aug-17-09

Crystal Filters

MOQ: Not Specified
Supplier From Wuhan, Hubei, China
 Inquire Now  
Model nominal insertion terminating holder
Type
Freq. Loss impedsnce
(mhz) (db) (ke¬/pf)
8mf15a 8.448 1.0 3.0 cu
Ct
Aug-17-09

Ceramic Filters

MOQ: Not Specified
Supplier From Wuhan, Hubei, China
 Inquire Now  
Tgs p/n cfa450/455w (lt450/455w)
Dim.(mm) 11.0x8.0x7.0
Frequency 450khz/455khz
Main features :
6db bandwidth: G¦2khz to G¦15khz
Attenuation: 40 ~ 60db min
Insertion loss: 6db max
26 Ceramic Filters Suppliers
Short on time? Let Ceramic Filters sellers contact you.
Mar-19-08

Ceramic Capillary Filter

$8.00K
MOQ: Not Specified
 Inquire Now  
Ceramic capillary filter
Jan-31-07

Ceramic Resonator

$0.03 - $5
MOQ: Not Specified
Supplier From Jiaxing, Zhejiang Province, China
 Inquire Now  
Ceramic resonator

From 180khz up to 60mhz, through-hole and smd products

Bulk or taping type
Jun-27-06
 Inquire Now  
Item name:Quartz Crystal Resonator-Tuning Fork
Item No: DST310S,410S
Type:SMD
Dimension: 3.2*1.5mm,4.1*1.5mm

Type:SMD
Dimension: 3.2*1.5mm,4.1*1.5mm
Jun-27-06
 Inquire Now  
Item name:crystal filter
Size:um-1, um-5
Type:dip
Frequency range:10.000~100mhz
Dimension:6.9*8.0*3.4mm, 6.9*6.0*3.4mm

Packing:dip
Dimension:6.9*8.0*3.4mm, 6.9*6.0*3.4mm
Jun-27-06
 Inquire Now  
Item name:ceramic filter
Size:lt455dw series
Type:dip
Center frequency:455khz
Dimension:11.0*7.0*8.0mm



Packing:dip
Dimension:11.0*7.0*8.0mm
Jun-27-06
 Inquire Now  
Item name:ceramic filter
Size:LTC455DWSeries
Type:SMD
Frequency:450,455KHz
Dimension:11.6*7.5*5.5mm


Packing:SMD
Dimension:11.6*7.5*5.5mm
Oct-31-05
 Inquire Now  
Ceramic filter slice
To metallurgy mainly, cast the trade, this product is more heavily than the surface area, mechanical intensity high, heat-resisting characteristic that assaults , can be strained and get rid of the metal and liquid impurity in casting the products, reduce the air vent of castings, raise the quality of casting, reduce and cast the cost, raise labour productivity. Main technical indicator
(1)the utilization ratio increasing 5-10%
(2)casting tired intensity increases by 15.5%
(4)spend 1300 fire-resistantly
Apr-18-20

Ceramic Vacuum Filter

$14.60K
MOQ: Not Specified
Supplier From Lianyungang, Jiangsu Province, China
 Inquire Now  
When cuts ceramic tile, it will add water while cutting. The main functions of adding water are: 1. Prevent the ceramic tile from being too high and crack; 2. Reduce the temperature of the saw blade and prolong the service life; 3. Reduce the dust pollution. However, this produces a mixture of ceramic tile powder and water, Ceramic filters can efficiently separate materials and water from sewage.
      The advantages of ceramic filters are as follows:
      First, the power consumption is low, the power is only 12-20KW per hour, and the energy consumption is low.
      Second, the filtered material is dry, the moisture content is about 10%, and the product has no loss, reaches 100% recovery.
      Third, fully automatic control, can achieve one person to guard multiple devices or directly access the control center to achieve unattended.
      Fourth, the liquid produced by the equipment is clear as pure water, and can be used directly as a production water source, which can achieve 90% water source recovery, greatly reducing the water consumption of the factory. #DiscVacuumFilter #DiscFilter #MiningSeparationFilter #MiningEquipment #MiningFilter #CeramicDiscVacuumFilter
Oct-01-19

Ceramic Filter

$0.25
MOQ: Not Specified
Supplier From Shenzhen, Guangdong, China
 Inquire Now  
Product Introduction
For TV/ VCR
Part Number Center Frequency(fn) (MHz) 3dB Bandwidth(KHz)min 20dB Bandwidth(KHz)max Insertion Loss(dB)max Spurious Attenuation(dB)min
LT4.5MB 4.5 fn±60 530 6 20(4.5+0.8MHz)
20(4.5-1.0MHz)
LT5.5MB 5.5 fn±75 550 6 25(5.5±1.0MHz)
LT6.0MB 6.0 fn±80 600 6 25(6.0±1.0MHz)
LT6.5MB 6.5 fn±80 630 6 25(6.5+1.0MHz)
30(6.5-1.0MHz)
Low Spurious In Picture Band Type

Part Number CenteFrequency(fn(MHz) 3dBandwidth(KHz)min 20dBandwidth(KHz)max InsertioLoss(dB)max SpuriouAttenuation(dB)min
LTSH4.5MCB 4.5 fn±60 600 6 30(0-fn)
LTSH5.5MCB 5.5 fn±60 600 6 30(0-fn)
LTSH6.0MCB 6.0 fn±60 600 6 30(0-fn)
LTSH6.5MCB 6.5 fn±70 650 6 30(0-fn)
LTSH4.5MDB 4.5 fn±70 750 6 30(0-fn)
LTSH5.5MDB 5.5 fn±80 750 6 30(0-fn)
LTSH6.0MDB 6.0 fn±80 750 6 30(0-fn)
LTSH6.5MDB 6.5 fn±80 800 6 30(0-fn)
High Selectivity Series
Part Number CenteFrequency(fn(MHz) 3dBandwidth(KHz)min 20dBandwidth(KHz)max InsertioLoss(dB)max SpuriouAttenuation(dB)min
LTT5.5MA 5.5 fn±50 350 9 50(5.5±1.0MHz)
LTT5.74MA 5.74 fn±50 350 9 50(5.74±1.0MHz)
LTT6.0MA 6.0 fn±50 400 9 50(6.0±1.0MHz)
LTT6.5MA 6.5 fn±50 400 9 50(6.5±1.0MHz)
Sep-11-07

Ceramic Honeycomb Filter

$0.22 - $50
MOQ: Not Specified
 Inquire Now  
Ceramic honeycomb filter

Materail: mullite. Mullite ceramic honeycomb filter have straight holes, more strongth compare to ceramic foam filter. Apply to iron, copper, copper, steel, stainless steel foundry.
Function:
1. Can remove big oxide,
2. Calm down turbulent laminar flow,
3. Absorb smaller impurities with it's myriad eyelets whicn only been found in microscope
Specification:
Al2o3: 50%
Hole type: square/round/triangle
Millihole: 2--3 um
Coefficient of thermal expansion: less than 4.0
Refractoriness: 1700 dgree celsius
Bending strength at normal temperature

Formal size: 50*50*12.5mm, 50*75*12.5mm, 100*75*12.5mm. Size can be changed according your requirements.

Standard export packing
Mar-18-06

Ceramic Foam Filter Used For Casting

$5.20K
MOQ: Not Specified
Supplier From Shanghai, Sh, China
 Inquire Now  
Ceramic foam filter used for casting
Our products have many advantages such as superior porosity, big m2/m3, high temperature resistance and excellent thermal shock resistance (see detail in technical data), it used in foundry, noise elimination and other industries widely. And especially for the foundry & casting industry.
Mechanic deterring: remove big oxide
Filtration: filtrate small impurities and oxide
Commutated function: calm down turbulent f¦claminar flow
Mixed round function: mix the distributaries and confluence flow equality, reduce air bubble
Absorbing function: the myriad eyelets which only been found in microscope can absorb smaller impurities, make more excellent metal liquid

31*31*22(cm) wrapped every pieces with soft plastic materials then packed in carton
Dec-11-07
 Inquire Now  
Ceramic foam filter (jintai)

Ceramic foam filter is developed as a new type molten metal filter to decrease casting flaw in recent years, designed for filtering impurities from liquid metals. With the

Distributing pores net structure, they are able to increase the surface areas, absorb the sinter, the liquid metal becomes more pure, waster quality problems such as sand pore

And air pore are much less, and the cast quality becomes much better.

Jintai ceramic foam filter:
Material including al2o3, sic, zro2.
Shape in square, round, cylinder.
Pore size: 8~60ppi
Special size is available upon request.

Jintai features: high quality products, competitive price, prompt delivery and professional services.

Cartons on pallets
Dec-11-07
 Inquire Now  
Ceramic foam filter

Ceramic foam filter is developed as a new type molten metal filter to decrease casting flaw in recent years, designed for filtering impurities from liquid metals. With the distributing pores net structure, they are able to increase the surface areas, absorb the sinter, the liquid metal becomes more pure, waster quality problems such as sand pore and air pore are much less, and the cast quality becomes much better.

Jintai ceramic foam filter:
Material including al2o3, sic, zro2.
Shape in square, round, cylinder.
Pore size: 8~60ppi
Special size is available upon request.


Cartons on pallets
Sep-11-07

Ceramic Foam Filter

$0.17 - $50
MOQ: Not Specified
 Inquire Now  
Ceramic foam filter

1. Alumina work at 1100 centigrade degree, apply for aluminium foundry.
2. Zirconia work at 1700 centigrade degree, apply for steel, stainless steel foundry.
3. Silicon carbide work at 1500 centigrade degree, apply for iron, copper, copper alloy foundry.
4. Fused zriconia-alumina work at 1600 centigrade degree, apply for some steel which have lower tem. Requirement.
Ceramic foam filter is been made by specific procedures and have peculiar bone-frame holes just like the shape of foam(called three-dimensional connected channel) and myriad eyelets which only been found in big times microscope. Compare to similar ones, our products have many advantages as below:
Stable chemical composition
Excellent strength
Resistant to high temperature
Calm down of the turbulent flow of metal nicely
Big m2/m3
Superior dimensional tolerances: +0/-2.5

Suggestions:
A. Control the melting point satisfactorily. Especially high temperature will destroy it's function.
B. Suitable ppi for different casting materials.
C. Use the maximum temperature as soon as possibly.
D. The pouring highness don't exceed 20cm commonly, and metal liquid don't touch the filtration directly.



Standard export packing
Apr-05-19
 Inquire Now  
The ceramic filter material sold by Ningxia Biyuan Activated Carbon Co., Ltd. is refined by a series of production processes. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, mainly used for water treatment,Ningxia Biyuan Activated Carbon Co., Ltd. is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Jul-31-24
 Inquire Now  
Flat Sheet Ceramic Membrane
The flat plate membrane is a new type of high temperature plate porous ceramic membrane, which is prepared by high temperature sintering process using inorganic materials such as alumina. Our Ceramic flat sheet membrane can offer exceptional efficiency and durability compared with the organic film. Ceramic flat membrane produced by one of professional flat sheet membrane manufacturers in China has the advantages of good chemical stability, good reliability, long service life and strong anti-pollution ability.

Advantages of Flat Sheet Ceramic Membrane
Long life and no degradation
Strong resistance to acid, alkali and to organic solvent; Suitable for all kinds of wastewater containing solvents and chemicals
Strong hydrophilic and better anti- pollution property
Better Mechanical properties, no broken wires phenomenon of hollow fiber membrane
Easy to wash lower cleaning frequency, suitable for all kinds of membrane cleaning methods
Low operating cost and energy saving

Flat Sheet Ceramic Membrane Specification
Length (mm) 500-1100
Width (mm) 110, 150, 250
Thickness (mmï¼? 3, 6
Area (m2) 0.5
Membrane material Al2O3, ZrO2, TiO2
Pore diameter (�¼m) 0.1
Pure water flux (m3/m2.h) 0.5-1.0
pH 0-14
Breaking strength (MPa) 40

Ceramic Flat Sheet Membrane Application Area
Membrane Bioreactor (MBR)
Industrial wastewater treatment (e.g. paper mill wastewater treatment)
Seawater desalination pretreatment
Municipal wastewater treatment
Domestic sewage treatment
Hospital wastewater treatment
Landfill leachate treatment
Pretreatment of RO system
May-06-22

Ceramic Foam Filter

$2.23K
MOQ: Not Specified
 Inquire Now  
Silicon Carbide Ceramic Foam Filter
Silicon Carbide Ceramic Foam Filter is mainly made of high purity fine silicon carbide powder, which is suitable for filtrating Ductile, Grey Iron, Vermicular Cast Iron and some Iron Alloy and also for filtrating non-ferrous alloy, such as Cooper alloy and Aluminum alloy. It can remove impurities efficiently, and make metal filling steady in mould. It can also reduce air flow and casting impact in mould, and decrease pin hole, sand hole defeats to increase casting quality and product rate.

These series of products are newest products, which are produced through special material formula and latest advanced technology. Compared with normal ceramic foam filters, these new series products can be used at a higher temperature, which have higher strength at room temperature and high temperature. The physical property of this special material enables our filters to have a better thermal shock resistance. They are suitable for harsh casting condition, such as placing on the bottom of vertical runner and casting at high temperature.
Dec-28-16

Ceramic Foam Filter Cff-S For Casting

$0.10
MOQ: Not Specified
 Inquire Now  
Cff-s is a range of new generation silicon carbide based ceramic foam filters with a consistent, high level performance in terms of metal flow rate and filtration efficiency. Cff-s filters are intended for filtering grey, ductile iron and nonferrous metals at the temperatures up to 1450 â°c. The filters can be placed in the gating system of the mould as well as in combination with exothermic extensions for direct casting/pouring on the filter. They can also be used for continuous non ferrous metal filtering, e.G. Production of copper wires, roads.
Features:
1. High strength
2. Excellent corrosion resistance
3. Outstanding thermal shock resistance
4. Available in kinds of shapes, in a variety of pore sizes, e.G.10ppi, 20ppi, etc.
Functions:
1. Clean iron castings
2. Fewer inclusions
3. Increased casting yield
4. Cost-savings from reduction in scrap
5. Lower costs for machining of the castings
Standard dimensions and technical parameters
Dimensions (mm) Pouring rate(kg/s) Filtration capacity(kg)
Grey iron Ductile iron Grey iron Ductile iron
40x40x22 4 3 65 32
50x50x22 6 4 100 52
75x50x22 9 6 150 75
75x75x22 14 9 220 100
150x150x22 50 36 900 450
170x150x32 62 42 1020 510
200x170x32 84 56 1400 700
D50x22 5 4 80 40
D60x22 6 5 110 55
Above figures are only for reference .Other special specification could be customized.
May-06-22
 Inquire Now  
With excellent thermal shock resistance, high strength, high hole fraction and specific surface area, unique cell designs and advanced material,Extruded Ceramic Filters have a special function of attracting and capturing molten metal impurities on the cell internal walls.
Extruded Ceramic Filters are available in a range of cell sizes for Foundry & Casting applications. A wide choice of filter dimensions is also available for any gating system requirem

Characteristics
1.Improved casting quality
2.Improved machinability of castings
3.Improved machine tool life

Materials
Cordierite, Mullite, Cordierite/Mullite, Zirconia

Application
Grey iron, Ductile iron, Aluminum Alloy, Stainless steel.
Mar-31-23

Ceramic Shaft Sleeve

$789
MOQ: Not Specified
 Inquire Now  
Ceramic Shaft Sleeve for Slurry Pump and gravel pump is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature.

Ceramic Slurry Pump spare parts is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature. The Ceramic Slurry Pump Parts mainly included impeller, Liners, Throat bush, Volute, Shaft Sleeve etc., the abrasion resistance of ceramic slurry pump parts are 5 times as wearable as high chrome slurry pump parts. However, the weight of ceramic spare parts is only 1/3 of chrome spare parts.

Slurry Pump Ceramic Shaft Sleeve which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and downtime were reduced accordingly. slurry pump ceramic shaft sleeves are precision formed of high-density alumina, fired, and ground to size. The hardness of ceramics (9.0 to 9.5 MOH Scale) resists this destructive action, In addition, the ceramic coated sleeve surface is highly polished which, together with its lower coefficient of friction, results in extended sleeve life and long service from the packing.

offers part codes for ceramic shaft sleeves include: B075J04, B075J05, C075J04, C075J05, CH075J04, CH075J05, CH076J04, CH076J05, D075J04, D075J05, E075J04, E075J05, F075J04, F075J04, FAM075J04, FAM075J05, FAM076J04, FAM076J05, PE075J04, PE075J05, PF075J04, PF075J05, G075J04, G075G05, SH075J04, SH075J05, SH076J04,SH076J05, GH075J04, GH075J05, GH076J04, GH076J05.
Nov-01-22
 Inquire Now  
Duplex Filter assembly SYLA-2 Spare parts with COO/COM
is specializing in the production and supply of spare parts of power plant steam turbine, generators, can provide from customized parts to finished factory product. The company regards scientific management, continuous improvement, quality excellence, customer needs as the quality of the enterprise policy, and in 2008 passed the ISO9001 quality system certification.

can offer many spare parts for power plants as below:

DF-Duplex Filter assembly SYLA-2-DF
Hydraulic oil filter RFA-250 20FC
hydraulic oil filter remover WU-A25 50S
excavator filter element SH-006
Generator End Cap Hydrogen Sealing Sealant T20-75
Filter element SFBX-160 5
transformer oil filter machine 400LD225K5
Solenoid Valve JT4WEB6D-62/EW220NZ5L
globe control valve KHWJ25F1.6P
Countersunk head bolt MG33.11.12.99
chemical filter cartridge FBX (TZ)-630 30
pressure hose S100-AC-FA-0150
Gas turbine seal oil vacuum pump reducer M02225.0BMCC1D1.5A
transformer oil filter machine EH0160D010BN3HC
Heater for Bolt Expansion ZJ-16-230(R)
pressure hose SMS-12/20-1219mm-C
SHAFT VIBRATION PROBE TM301-A02-B00-C0-D00-E00-F00
hydraulic return filter PGLX-679
pressure hose SMS-15/20-610mm-C
oil suction filter HX-630*10W
Gas turbine bolt heating rod ZJ-20-T1R
filter element cartridge HC8314FCZ39H
High pressure piston pump PVH074R01AB10A2500AE01
compression bolt 20MG30.11.08.92BZ
Hydraulic Filter SKX-250 30
300MW turbine AC lube pump volute 125LY-35-4
cover plate CVC-16-A
excavator filter element AX3E301-01D10V/F
low pressure switch RC778NZ090ZSS
oil filter wrench NLX-100 1
EH oil HP accumulator bladder NXQ A-40/31.5-L-EH
Roller frame 20MG40.11.09.98
filter hydraulic oil 21FC5121-110 25/20
pressure hose SMS-10/20-1829mm-C
linear displacement sensor TD-1 0-500
hydraulic spin on return line filter Q3U-E630 3FS
Epoxy Potting Adhesive J0792
Duplex Filter assembly SYLA-2
solenoid valve breville HQ16.16Z-2
filter housing cartridge WU-H630 50FS
Hydraulic relief valve SBSG-03-1NP-3-R-W220-20
DFYL-2022-10-28-MY
26 Ceramic Filters Suppliers
Short on time? Let Ceramic Filters sellers contact you.
  • First page
  • Next
See what buyers and suppliers are discussing in Ceramic Filters import export community