Find Verified Petroleum Oil Related Products Suppliers, Manufacturers and Wholesalers

The product is a colorless and transparent new polymer materials, a variety of different viscosities (5cps ~ 2million cps), the liquid from flowing easily into a thick semi-solid material. This product has a special smoothness, softness, hydrophobicity, good chemical stability, excellent electrical insulation and resistance to high temperature. High flash point, low freezing point, long-term using between -50 �ºC ~ +200 �ºC, low viscosity-temperature coefficient, high compression ratio, low surface tension, water-repellent moisture resistance, low heat conduction coefficient.
Because it has special and excellent physical and chemical function, it can be used in many different industries:
1. Cosmetic industry for skin care cream, bath gel, shampoo and other cosmetic formulations with excellent softness and silky feel.
2. Rubber, plastic, latex, polyurethane, light industry: as a model release agent, brightener agent and release agent of some rubber, plastic, latex, polyurethane products and handicraft production.
3. Machinery, automotive, instrumentation, electronics and other industries used as high-grade lubricants, liquid springs, cutting fluids, buffers oil, transformer oil, high temperature brake fluid, brake fluid, instrumentation damping oil, mold release agents and other modeling framework.
4. Textile, apparel industry as a softener, water repellent, feel modifiers, sewing thread lubrication, chemical fiber spinneret pressure lubrication and clothing lining additives.
5. Add it to other additives in leather and leather chemicals industry, it can be used as softeners, water repellent, feel agents, defoamers, brighteners.
6. Pharmaceutical, food, chemical, paint, building materials industry as defoamers, lubricants, and other weather-resistant paint.
7. Other specific purposes and other new materials.

Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis The additive of alkaline battery electrolyte can increase the electric capacity by 12 to 15 and increase the service life by 2 to 3 times
It can be used as an absorbent for carbon dioxide and can purify the air in submarines
The chemical equation is 2LiOHsCO2gLi2CO3sH2Ol
It is used to make lithium salt and lithiumbased grease electrolyte of alkaline battery absorption liquid of lithium bromide refrigerator etc used in petroleum chemical industry light industry nuclear industry etc When used in alkaline batteries the aluminum content is not more than 006 and the lead content is not more than 001 It is used as an analytical reagent a photographic developer and also in the manufacture of lithium it is used as a raw material for the preparation of lithium compounds It can also be used in metallurgy petroleum glass ceramics and other industries
Lithium hydroxide is mainly consumed for the production of lithium greases A popular lithium grease is lithium stearate which is a generalpurpose lubricating grease due to its high resistance to water and usefulness at both high and low temperatures
Carbon dioxide scrubbing
Lithium hydroxide is used in breathing gas purification systems for spacecraft submarines and rebreathers to remove carbon dioxide from exhaled gas by producing lithium carbonate and water
It is used as a heat transfer medium and as a storagebattery electrolyte It is also used in ceramics and some Portland cement formulations Lithium hydroxide isotopically enriched in lithium7 is used to alkalize the reactor coolant in pressurized water reactors for corrosion control

Aviation turbine engine base lubricating oil (synthetic oil) is a high-performance lubrication base component specially designed for turbine engines (turbojet, turbofan, turboprop, turboshaft). It must pass rigorous certifications such as MIL-PRF-23699 (US military standard), MH/T 6084 (civilian standard), and GJB 135A (national military standard). Its core function is to lubricate bearings/gears, dissipate heat, prevent coking and corrosion, and ensure the stable operation of the engine under extreme conditions ranging from -60to 246.

Chemical Propeties:

1.Heat and cold resistant, can work between -50C~+200C in the long run.

2.Viscosity ranging from 5-5 million cs, also insignificant temperature dependence of viscosity.

3.Excellent insulation performance, good water repellent and moisture resistant.

4.Good chemical stability,high resistance to weathering and oxidation conditions.

5.Inert, odorless, tasteless, stainless, and therefore ideal for medical and food applications.

6.Low surface tension, high flash point, low freezing point.

Application:

1.Lubricant for rubber, plastic bearing, gear, also for reducing the friction

2.Release agent for plastic forming process, rubber process, metal cast, making paper, etc.

3.Material for making defoamer

4. Surface treating agent for glasses, ceramics, metals

5.Additive agent for paint, rubber, paraffin, resin, etc.

6.Medical defoamer for artificial heart-lung machine and basic pharmaceutics to treating pulmonary edema.

7.Insulating, dustproof and mildewproof coating on glassed, ceramics

8.Finishing agent for textile

9.Basic material of cosmetics, skin care products, hairdressing products

10.Softening agent, water repellent, hand modifier for textile and leather

11.Hydraulic oil, especially in aircraft

12.Material of shaving cream, toothpaste, soap powder, washing powder

13.Heat transfer fluid

Characteristic:

1. Colorless, tasteless, non-toxic, harmless, chemically inert, bright and transparent;

2. Give the product an excellent and noble hand feeling, and feel very thick after use, moisturizing but not greasy;

3. Highly moisturizing and moisturizing;

4. Excellent oxidation resistance and thermal stability;

5. It has good stability in a wide pH range;

6. It is a high-purity hydrocarbon with excellent cost performance;

7. It has good compatibility with mineral oil and most of the raw materials of care products;

8. Used in hair care products to increase brightness and combing feeling;

9. It has anti-wrinkle effect and can be used in anti-wrinkle products;

10. It is conducive to the uniform dispersion of sunscreen in the oil phase, can increase the SPF value, and can be used in sunscreen products;

11. It is non-irritating and non-sensitizing to the skin and is very safe. It is strongly recommended for use in baby care products;

12. It has excellent dispersing effect on powder, and it is recommended to be used in makeup and lipstick formulations.




Application:

1. Squalane: strengthens the repair of the epidermis, effectively forms a natural protective film, and helps the balance between the skin and sebum.
2. Squalane is a kind of lipid closest to human sebum. It has strong affinity and can be integrated with human sebum membrane to form a natural barrier on the surface of the skin.

3. Squalane can also inhibit the peroxidation of skin lipids, can effectively penetrate into the skin, and promote the proliferation of skin basal cells, and has obvious physiological effects on delaying skin aging, improving and eliminating chloasma.

4. Squalane can also open skin pores, promote blood microcirculation, increase cell metabolism, and help repair damaged cells.

1.Used as an intermediate in organic synthesis. It is liquid, soluble in organic solvent, slightly soluble in water. It is a low toxicity, high efficiency and broad spectrum anti-mildew agent. It has strong killing effect on mold and can achieve ideal anti-mildew effect.

2.It can be widely used in coating, paint, lubricating oil, shoe polish, leather chemistry, wood products and cultural relics protection and many other products.

Name: Triethanolamine
CAS: 102-71-6
Chemical formula: C6H15NO3
Appearance: colorless liquid

Triethanolamine is a colorless oily liquid with mild odor, easy to absorb water, exposed to air and turning brown under light. At low temperatures, it becomes a colorless or light yellow cubic crystal system.

Application:
1. As a compliant lubricant, it can eliminate friction between metals and help improve the viscosity and solubility of lubricating oil.
2. As a surfactant, it is often used in household cleaning and personal care products such as detergents, cleaners, softeners, etc.
3. As a preservative, stabilizer, and co solvent, it can be used in cosmetics, and food processing.
4. As an oil in water emulsifier, it can be used to prepare various skin lotion and cosmetics.

It has excellent properties of penetration, softening, emulsification, antistatic, biodegradation and sterilization. Good chemical stability, heat resistance, light resistance, pressure resistance, strong acid and alkali resistance. Used as natural and synthetic rubber, silicone oil and asphalt emulsifier; Antistatic agent and softener for synthetic fiber, natural fiber and glass fiber; A conditioner for hair conditioner.

Items

Specifications

Main content

99.0%min,99.5%min

Loss on drying

0.50% max

Water Insoluble
0.05% max

Chloride

0.20% max,0.50% max

Iodide

0.001%max,0.01%max

Sulphate

0.005%max
pH

4.5-6.0
Pb

0.2ppm max,0.5ppm max
Fe

0.5ppm max
Cu 0.5ppm max
Bi
0.2ppm max

As
none,0.4ppm max

FIBC, Bulk Container, Flexible Container, Big Bag, Ton Bag,

Usage: food, chemicals, mineral ore, carbon black, powder goods, granule goods, etc..
Color: black, white, orange, blue, etc..
Size: 80X80X100cm, 90X90X130cm, customized, etc..
Capacity: 300-3000 KG or 4T,
Safety Factor: 3:1,5:1,6:1,
Type: U panel, square bottom , circular, etc.

Chemical Propeties:

1.Heat and cold resistant, can work between -50C~+200C in the long run.

2.Viscosity ranging from 5-5 million cs, also insignificant temperature dependence of viscosity.

3.Excellent insulation performance, good water repellent and moisture resistant.

4.Good chemical stability, high resistance to weathering and oxidation conditions.

5.Inert, odorless, tasteless, stainless, and therefore ideal for medical and food applications.

6.Low surface tension, high flash point, low freezing point.

Application:

1.Lubricant for rubber, plastic bearing, gear, also for reducing the friction

2.Release agent for plastic forming process, rubber process, metal cast, making paper, etc.

3.Material for making defoamer

4. Surface treating agent for glasses, ceramics, metals

5.Additive agent for paint, rubber, paraffin, resin, etc.

6.Medical defoamer for artificial heart-lung machine and basic pharmaceutics to treating pulmonary edema.

7.Insulating, dustproof and mildewproof coating on glassed, ceramics

8.Finishing agent for textile

9.Basic material of cosmetics, skin care products, hairdressing products
10.Softening agent, water repellent, hand modifier for textile and leather

11.Hydraulic oil, especially in aircraft

12.Material of shaving cream, toothpaste, soap powder, washing powder

13.Heat transfer fluid

Vaseline is a semi-liquid mixture of alkanes or saturated hydrocarbons, also known as petrolatum, which is obtained by fractional distillation of petroleum. Its state is between solid and liquid at room temperature, and there are three colors of brown, yellow and white due to different uses. Natural petroleum jelly is derived from petroleum residual oil concentrates such as paraffinic heavy oil; artificial petroleum jelly is derived from a mixture of mineral oil thickened with pure ceresin, paraffin and paraffin grease. Vaseline has a smell of mineral oil, but no kero sene. Can be used as raw materials for medicines and cosmetics, and also for machine lubrication.
1.Helps soothes chapped skin.
2.Highly effectively protests the skin from the drying effects of weather.
3.Retains essential moisture in your skin leaving it nourished and radiant.
Application
Vaseline is a mineral wax, it will not be absorbed by the skin, it can form a protective film on the skin surface, so that the skin's water is not easy to evaporate and lose, and it is extremely insoluble in water, and can adhere to the skin for a long time, so it has a very Good moisturizing effect, very suitable for dry skin. Can be used as lip balm, hand cream, face or body, is a very good moisturizer. It also has the effect of removing scars. 2. Vaseline is non-irritating, stable and difficult to deteriorate, and it is not easy to cause human sensitivity. It is most suitable for people who are allergic to the fragrances and alcohols added to general moisturizing product.

Vaseline is a semi-liquid mixture of alkanes or saturated hydrocarbons, also known as petrolatum, which is obtained by fractional distillation of petroleum. Its state is between solid and liquid at room temperature, and there are three colors of brown, yellow and white due to different uses. Natural petroleum jelly is derived from petroleum residual oil concentrates such as paraffinic heavy oil; artificial petroleum jelly is derived from a mixture of mineral oil thickened with pure ceresin, paraffin and paraffin grease. Vaseline has a smell of mineral oil, but no kero sene. Can be used as raw materials for medicines and cosmetics, and also for machine lubrication.

SEBS is a linear triblock copolymer with polystyrene as the end segment and ethylene butene copolymer obtained by hydrogenation of polybutadiene as the intermediate elastic block. SEBS does not contain unsaturated double bonds, so it has good stability and aging resistance. It is both plastic and highly elastic and can be processed and used without vulcanization. The leftover materials can be reused and are widely used in the production of high-end elastomers, plastic modifiers, adhesives, lubricating oil tackifiers, etc Filler and sheath materials for wires and cables.

polyisobutylene (PIB) character:
Polyisobutylene (PIB) is a colorless, odorless, non-toxic viscous or semi-solid substance.

Polyisobutylene (PIB) Application:
Polyisobutylene (PIB) has important applications in lubricating oil additive, polymer material post-processing, cosmetics and other fields.

The fully refined paraffin wax has a white solid appearance with block or granular structures. It has high melting point and low
oil contains. It also has features of no bonding, no sweating, no greasy feeling, waterproof, moisture-proof and electrical
insulation under normal temperature. Due to the depth of refinement, the products are of low content of polycyclic aromatic
hydrocarbons, good chemical stability and light stability, strong toughness, good plasticity, white color, no mechanical
impurities and water, and no smell. Fully refined paraffin can be dissolved in: benzene, ether, chloroform, carbon disulfide,
carbon tetrachloride, turpentine, petroleum, and fixed oil.

Product advantages: acid and alkali resistance, strong adhesion, strong covering power
Product application: Floor tiles, cement concrete, asphalt plastic products, building rubber coatings, paints, inks, magnetic materials, papermaking and other fields

Impregnating Pitch is a special low QI coal tar pitch processed from high-temperature coal tar through fractional distillation and vacuum purification. With low viscosity, strong permeability and high coking value, it is the core raw material for graphite electrode impregnation. It effectively fills the internal micropores of carbon blanks, significantly improves the density, mechanical strength and electrical conductivity of graphite electrodes after secondary calcination. It is widely used in steelmaking graphite electrodes, aluminum electrolysis carbon anodes and various carbon composite materials.
Using high-temperature coal tar as raw material, remove light oil components through fractional distillation, then adopt vacuum flash evaporation technology to separate low QI impregnating pitch from common binder pitch. Strictly control quinoline insoluble content, softening point and volatile matter to ensure stable permeability and coking performance of each batch. The whole process adopts physical purification without impurity pollution, meeting high-standard carbon material production requirements.

Granular activated carbon is defined as the activated carbon being retained on a 50-mesh sieve. GAC products are made from coconut shell, coal, lignite, and anthracite products. Adsorption is the primary mechanism by which GAC works and the primary reason it is widely used to reduce undesirable taste, odor and color and to improve the safety of drinking water. Coconut granular activated carbon is mainly used for gold recovery. And 4*8mesh coconut shell activated carbon is usually applied for some heavy metals removal from the waste gas. According to different applications, clients can choose different activated carbon types according to the specific working conditions.

Sodium Stearate
Sodium stearate is a white oily powder with a slippery feel and fatty odor.

Soluble in hot water or hot alcohol.

The aqueous solution is alkaline due to hydrolysis and the alcoholic solution is neutral. Produced by the interaction of octadecanoic acid and sodium hydroxid.

Used in toothpaste manufacturing, also used as water repellent and plastic stabilizer.

5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.

AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.

Alloy grade

Silicon Si

Iron Fe

Copper Cu

Manganese Mn

Magnesium Mg

Chromium Cr

Zinc Zn

Titanium Ti

Zirconium Zr

other

Aluminum AL

new grade

old grade

0.40

0.40

0.10

0.5-0.8

5.8-6.8

0.20

0.02-0.10
each total
5A06
LF6

0.05

0.15

margi

5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.

AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.

Alloy grade

Silicon Si

Iron Fe

Copper Cu

Manganese Mn

Magnesium Mg

Chromium Cr

Zinc Zn

Titanium Ti

Zirconium Zr

other

Aluminum AL

new grade

old grade

0.40

0.40

0.10

0.5-0.8

5.8-6.8

0.20

0.02-0.10
each
total

5A06

LF6

0.05
0.15

margi

Product Name : NM400 Carbon Steel Plate

Material : 41304140AISI4140A516Gr70A537C12A572Gr50A588GrBA709Gr50A633DA514A517AH36API5LB1E06501E100610CrMo910BB41BFBB503CoetenBDH36EH36P355GHX52X56X60X65X70Q460DQ460Q245RQ295Q345Q390Q420Q550CFCQ550DSS400S235S235JRA36S235J0S275JRS275J0S275J2S275NLS355K2S355NLS355JRS355J0S355J2S355G2NS355J2CNSA283GrASA612MSA387Gr11SA387Gr22SA387Gr5SA387Gr11SA285GrCSM400ASM490SM520SM570St523St37StE355StE460SHT60S690QS690QLS890QS960QWH60WH70WH70QWQ590DWQ690WQ700WQ890WQ960WDB620

Surface : Natural color coated galvanized or customized

Technique : hot rolled or cold rolled

Application : NM400 wear-resistant carbon steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc. It is also commonly used as high-strength structural steel with yield strength â?¥ 800MPa.

Standard : DIN JIS GB ASTM AISI EN etc.

Delivery time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Steel strips package or seaworthy packing

Capacity : 250,000 tons/year

Payment : T/T L/C, Western Union etc.

Carbon Steel plate application range

* NM400 wear-resistant carbon steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc. It is also commonly used as high-strength structural steel with yield strength â?¥ 800MPa.

* Widely used in crushers, shale shakers, feed hoppers, skips, loaders, excavators, bulldozer buckets and knife plates, scraper conveyors, dump trucks, trams, pavers, asphalt mixing stations, knives, gears, mud pipeline systems, cement plant equipment, screw conveyors and other wear resistant structural parts

* Function: It is mainly used to provide protection for places or parts requiring wear resistance, so as to prolong the service life of the equipment, reduce the maintenance downtime caused by maintenance, and correspondingly reduce the investment of funds.
Performance: yield above 900 and tensile strength above 1100.

Packing & Delivery
* The Carbon steel sheet will be packed in seaworthy packing such as steel strips bundles. If you have any special requests
on this, please let us know advanced. We will refer to your email kindly.

1).20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)

2).40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)

3).40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High)

There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.

Light liquid paraffin, also known as white oil, is named Light liquid paraffin, Paraffinum Liquidum Leve, or Light mineral oil English. Light liquid paraffin is actually a mixture of various liquid saturated hydrocarbons derived from petroleum, mainly containing paraffin and cycloalkanes; its general chemical structure is generally considered to be C2n 2, and the United States Pharmacopeia (USP NF20) allows it to contain appropriate stabilizers such as BHA, BHT, or vitamin E.
�  The applications of light liquid paraffin are similar to those of liquid paraffin, mainly used as an excipient in topical drug formulations, utilizing its emollient properties as a component of ointment. In addition, light liquid paraffin is also used in oil-in-water emulsions and polyethylene glycol, and can serve as a solvent and lubricant for tablets and capsules as well as an oily medium in many drug microencapsulation processes. Our company's production method uses relatively high-quality food-grade light liquid paraffin produced by hydrogenation as material, employing refining techniques to improve the quality indicators and enhance the quality of light liquid paraffin, so as to meet the quality requirements of Part II of the 2015 of the Chinese Pharmacopoeia.

Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 �¢??) and heavy diesel (with a boiling point range of about 350-410 �¢??). Widely used in large vehicles, railway locomotives, and ships.
The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.

Chlorphenesin is a preservative widely used in cosmetics and is compatible with most preservatives (including potassium sorbate, sodium benzoate, and methylisothiazolinone). It usually has a weak characteristic odor. The melting point of 77.0 to 80.5 �ºC. Slightly soluble in water (about 0.5%Chemicalbook). 95% ethanol has a solubility of 5%. Soluble in ether. Slightly soluble in nonvolatile oil, insoluble in white mineral oil. Microbial control: provides improved broad-spectrum antimicrobial activity. It can inhibit and kill G+, G-, Aspergillus Niger, Penicillium pine, Candida albicans and Saccharomyces cerevisiae.

What is Methylpyrrolidone?

Methylpyrrolidone, also known as NMP or 1-methyl-2-pyrrolidone). NMP (N-Methylpyrrolidone) highly polar organic solvent used in a variety of industries and applications. Colorless transparent oily liquid with a slight amine odor. It is soluble with water, alcohols, ethers, esters, ketones, halogenated hydrocarbons, aromatic hydrocarbons and castor oil. Low volatility, thermal stability, chemical stability are good, can volatilize with water vapor. It has hygroscopic property. Sensitive to light.

APPLICATION

1. Conductive pastes for lithium-ion battery and carbon nanotubes.
2. Acetylene concentration and extraction of butadiene, isoprene and aromatic hydrocarbons.
3. Lubricating oil refining.
4. Polymer solvents for insoluble engineering plastics (poly(p-phenylene sulfide) , polyimide) and aramid fibers.
5. High-grade paint, ink, pigment.
6. Cleaning agent: deoiling, degreasing, dewaxing, polishing, rust, paint, etc.
7. Artificial kidney function membrane fluid, desalination membrane fluid.
8. Polymer industry, pharmaceuticals, pesticides and other industries.

PerfluorotributylamineDetails

Chemical Name:Perfluorotributylamine

CAS No.: 311-89-7

Molecular Formula:C12F27N

Molecular Weight:671.09

Appearance: Colorless transparent liquid

PerfluorotributylamineUsage

1. Anti-corrosion isolation of instrumentation, transmission fluid

2. Dielectric insulating liquid

3. Chemical reaction stabilization diluent or special solvent

4. Thermally conductive thermal coolant for transformers, especially for high-rise building small transformer oil

5. Antioxidant lubricant

6. Fluorocarbon emulsion artificial blood

7. Electronic components, devices

PerfluorotributylaminePackaging and Shipping

Packing: 25kg/woven bag with pallets

PerfluorotributylamineStorage

Stored in cool dry place away from fire and acids

Triethylene glycol monomethyl ether is a chemical used in organic synthesis. As a solvent and thinner for printing ink, industrial cleaning agent, coating (nitro fiber paint, varnish, enamel), copper coated plate, printing and dyeing, etc. It can be used as raw materials for chemical products such as pesticide intermediates, pharmaceutical intermediates and synthetic brake fluid. As electrolytes for electrolytic capacitors, chemical fiber dyeing agent for leather, etc. Used as textile auxiliaries, synthetic liquid dyes, chemical fertilizers and desulfurization agents in oil refining.

1)Chemical Characteristic� :� Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for�  liquid paraffin, natural paraffin etc.
2)� Properties:� White particle,flake or powder, with good lubricant effect,� chemical durability and good electrical performance, soluble in aromatic hydrocarbon.

Soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated.

The hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature. The leftover bean husks are commonly used as animal feed.

Adding appropriate beeswax can increase the hardness of the finished wax Animal oil and fat extracted from honeycomb nest, granular, good toughness, suitable for

mixing with other waxes, melting point 65 degrees Celsius, can also be used to make difficult silicone mold wax alone.

High-Quality Soy Wax for Candle Production at Low Prices
The texture is delicate like milk, burning without black smoke or irritating odor, environmentally friendly and healthy, and more reassuring!
Applicable scenarios:
Handmade Studio Ingredients | Home Fragrance Customization | Wedding Companions | Stress Relief DIY

Application :Candle Making
Hardness :Soft
Melting Point:42-72
Quality:Industrial
Transport Package:25kgs/Bag
Specification:1T

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

Used in the production of acetylene gas, polyvinyl chloride, lime nitrogen, dicyandiamide, iron and steel desulfurizer, etc., used in electronics industry, teaching reagents. Calcium carbide is used for chemical production accounts for about 60%, and the remaining 40% is used for metal welding and cutting. Using calcium carbide as raw material can produce a series of chemical products, such as PVC resin, polyvinyl alcohol, vinyl acetate, neoprene rubber, butanol, octanol, tricyanoethylene, tetracyanoethylene, acetaldehyde, acetylene carbon black, lime nitrogen, etc.

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

* CAS 107-98-2 Industrial Grade Propylene Glycol Monomethyl Ether 99.9% Pm

* PM Proprylene Glycol Monomethyl Ether is a colorless and transparent liquid with low toxicity and good solubility. It is widelyused as solvents and additives in coatings, printing inks, dyes, pesticides, cosmetics and other industries. PM Proprylene GlycolMonomethyl Ether has excellent dissolving ability and can effectively dissolve various resins, pigments and additives, making theproducts made with good uniformity and stability. In addition, the evaporation rate of PGME is moderate, which can make thecoating or ink layer form good leveling and gloss during the drying process.

1.As a solvent; dispersant or diluent, it is used in industries such as coatings, inks, printing and dyeing, pesticides, celluloseand acrylates.

2. It can also be used as fuel antifreeze, cleaning agent, extraction agent and non-ferrous metal beneficiation agent. It can also be used as raw material for organic synthesis.

3.Mainly used as an excellent solvent for nitrocellulose, alkyd resin and maleic anhydride-modified phenolic resin, as an additive for jet fuel antifreeze and brake fluid, etc.; mainly used as a solvent, dispersant and diluent, and also used Used as fuel antifreeze, extraction agent, etc.

Product Introduction:
Lauric Acid is used in many applications, including: anionic and nonionic surfactants, and raw material for emulsifiers. Used in the rubber industry as an activator/accelerator/ plasticizer and softener.
Widely used in pharmaceuticals, surfactants, soaps, detergents, cosmetics, daily chemicals.

Product Functions&Applications:

1. Lauric Acid mainly used in the production of alkyd resin, wetting agent, detergent, pesticides, surfactants, food additives and cosmetics raw materials.
2. Lauric Acid used as a surface treatment agent for the preparation of adhesive. It is also used in the manufacture of alkyd resin, chemical fiber oil, pesticides, synthetic spices, plastic stabilizer, gasoline and lubricating oil.
3. Lauric Acid is the raw material for producing soap, detergent, cosmetics, surfactants and chemical fiber oil.

Fatty alcohol polyoxyethylene ether, levelling agent O also known as flat plus O, is a non-ionic surfactant, the appearance of milky white or beige paste, high molecular weight, solid (can be made into flake solid according to the requirements), easily soluble in water, ethanol, ethylene glycol, turbidity point, PH value of 1% water solution is neutral. Resistant to acid, alkali, hard water, heat and heavy metal salt. It has strong evenness, slow dyeing, permeability and diffusivity for all kinds of dyes. It can be used in the same solution with all kinds of surfactants and dyes. Appearance milky white, beige paste or solid shape PH 6-8 turbidity point 91-96

Applicationï¼?
1. As a non-ionic surfactant, the washing industry plays a role in emulsification, foaming, and decontamination. It is the main active ingredient of hand sanitizer, laundry detergent, shower gel, laundry detergent, detergent, and metal cleaning agent.
2. As a textile printing and dyeing auxiliary agent, the textile printing and dyeing industry plays an emulsifying role: emulsified silicone oil penetrating agent, leveling agent, polypropylene oil agent.
3. As a deinking agent, carpet detergent, and resin remover in the papermaking industry.
4. Other products such as pesticide emulsifiers, oil demulsifiers, lubricating oil emulsifiers, etc.

Standard EN590 low-sulfur diesel fuel with 10ppm sulfur content, suitable for all heavy-duty trucks, oilfield machinery and marine engines, supplied via bulk vessel delivery from major global refineries.

PerfluorotributylamineDetails

Chemical Name:Perfluorotributylamine

CAS No.: 311-89-7

Molecular Formula:C12F27N

Molecular Weight:671.09

Appearance: Colorless transparent liquid

PerfluorotributylamineUsage

1. Anti-corrosion isolation of instrumentation, transmission fluid

2. Dielectric insulating liquid

3. Chemical reaction stabilization diluent or special solvent

4. Thermally conductive thermal coolant for transformers, especially for high-rise building small transformer oil

5. Antioxidant lubricant

6. Fluorocarbon emulsion artificial blood

7. Electronic components, devices

PerfluorotributylaminePackaging and Shipping

Packing: 25kg/woven bag with pallets

PerfluorotributylamineStorage

Stored in cool dry place away from fire and acids

Specification Application
EL-10 EL12 EL-20 HEL-20
1. Soluble in most organic solvents, dispersed in water, with excellent emulsification and diffusion properties.
2. In the textile industry, it is mainly used as a spinning oil for synthetic fibers such as polyester, polyacrylonitrile, and polyvinyl alcohol. It has emulsifying and anti-static effects, making the sizing soft and smooth, and reducing breakage; It can be used as a softening and smoothing agent in chemical fiber size, and can eliminate foam in synthetic size solution; HEL-20 also has the characteristic of low coking at high temperatures.
3. In the pharmaceutical industry, it is used as an emulsifier in the manufacturing of liniments, creams, emulsions, etc.
4. It can be used as pesticide emulsifier, lotion polymerization emulsifier, and used to prepare water-soluble metal cutting fluid and household washing products.
EL-30
EL-40
HEL-40 1. Easily soluble in water, fatty acids, or other organic solvents, with excellent emulsification performance
2. Used as emulsifiers in the ink and pharmaceutical industries.
3. It can be used as an emulsifier for organic phosphorus pesticides.
4. Used as an o/w type emulsifier for emulsification of various planting, animal, and mineral oils.
5. EL-40 is used as a component of wool, wool oil and chemical fiber oil in the textile industry, which has both emulsifying effect and antistatic effect. It can be better mixed with other antistatic agent, and can also be used to prepare size to eliminate foam in synthetic size. EL-40 has excellent diffusion and protective colloid properties, and is used as a monomer in the wool spinning industry for blending with wool oil. It is easy to wash off and has good hard water resistance.
6. Used as a dehydrating agent for oil field raw oil.
7. Used in the metal processing industry to prepare water-soluble metal cutting fluids.
8. HEL-40 can be used as a pharmaceutical grade solvent.
EL-60 1. This product is an o/w emulsifier.
2. It can be used as a chemical fiber oiling agent and a component of petroleum.
3. Pesticide emulsifier.
4. Petroleum dehydration demulsifier.
5. Ink, printing paste emulsifier.
6. Various planting, animal, and mineral oil emulsifiers.
7. Used as an emulsifier, fat enhancer, and emollient in the cosmetics and pharmaceutical industries.
8. It is used to manufacture shampoo foam bath liquid, skin care products, pharmaceuticals, etc.
9. Used in the metal processing industry to prepare metal cutting fluids.
EL-80
EL-90

Phoxim is a highly effective and widely used organophosphorus insecticide that belongs to the family of carbamates. It is renowned for its exceptional pest control capabilities and its versatility in various agricultural and horticultural applications.

Product Description
Packaging & Delivery

Packaging Detail: For liquid: 200LTR/drum, 20L/drum, 1L/bottle, 500ml/bottle, 250ml/bottle, 100ml/bottle.
For solid: 25 kg/drum, 25kg/bag, 1kg/bag or on the requirement of client.
Delivery Detail: 20-30days

Specifications
Common name: Phoxim (BSI, E-ISO, ESA); Phoxime ((f) F-ISO)
IUPAC name: Chemical Abstracts name: A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile
CAS RN: 14816-18-3
EC No.: 238-887-3
PHYSICAL CHEMISTRY
Mol. Wt.: 298.3 C
M. F.: C12H15N2O3PS
Form: Yellow liquid; (tech., reddish-brown oil).
M. P.: 6.1 C
B. P.: Decomposes on distillation
V. P. 2.1 MPa (20 C) K
OW logP = 3.38 Henry 4.18 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 C)
Solubility In water 1.5 mg/l (20 C). In toluene, n-hexane, dichloromethane, isopropanol >200 g/l. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 C). Gradually decomposed under u. V. Irradiation.

MAMMALIAN TOXICOLOGY
Oral Acute oral LD50 for rats: >2000 mg/kg.
Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg.
Not irritating to eyes or skin (rabbits).
Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol).
ADI (JMPR): 0.004 mg/kg b. W. [1999].
Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; R22

ECOTOXICOLOGY
Birds LD50 for hens 40 mg/kg.
Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l.
Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes)
Bees: Toxic to bees by contact and respiratory action.

APPLICATIONS
It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean.
Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.

Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water.

Additional applications include:
* Pharmaceutical
* Oil & Gas
* Drinking water treatment
* Groundwater remediation
* Wastewater treatment
* Pulp & Paper
* Brewery & Winery
* Dechlorination/chloramine reduction
* Removal of organic contaminants
* Taste and odor reduction
* Disinfection-by-product (DBP) removal

Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water.

Additional applications include:
* Pharmaceutical
* Oil & Gas
* Drinking water treatment
* Groundwater remediation
* Wastewater treatment
* Pulp & Paper
* Brewery & Winery
* Dechlorination/chloramine reduction
* Removal of organic contaminants
* Taste and odor reduction
* Disinfection-by-product (DBP) removal

CAS7440-44-0
EINECS 264-846-4
Molecular formula C
Main application gold washingm sewage treatment
Appearance Black toughened solid

We are sourcing solutions service provider based in Shanghai in 2019.

No matter your industry, we guarantee reliability, consistency, and efficiency.
Activated carbon and all it's derivatives for gas purification, water treatment and Gold mining with best quality, are some of our wide range products we have sourced before.

Whatever the specifications you need we can find it for you with a best rate.
All you need to do is to specify your specifications as below..
Ash Content, Mesh Size, Bulk Density, Iodine, Hardness, Moisture Percent, Shape & Size.

Packing details:
1- 25kg/bag
2- 1ton/jumbo bag
3- Pack as per your request.
HS code: 3802109000

And for more details please drop us a message here and we will get back to you in 24 hours.

Automotive carbon fiber film made of highgrade PVC fiber never fade this product is bubblefree The material is lightweight good toughness strong resistance and easy construction

Carbon fiber vynil made of highgrade  PVC fiber never fade this product
is bubble free The material is lightweight good toughness strong resistance and easy construction

1vinyl carbon fiber  Product information
PVC film thickness 012mm
Glue normal glue or stronger glue
Backing paper 120gm2
Max width 152cm
Roll length 50m
Color black gold silver red blue white Dark gray

2 vinyl wrap carbon fiber Application
Carbon fiber modification on engine hood empennage surrounding surface car handle rotary plate monocoque suspension wings and engine cover etc
2 Package
 Inner core Carton

 Inner core hard tube

Activated Carbon Column is made of high-quality anthracite, which is carbonized and activated. The product has large holes. It has the advantages of fast filtration speed, strong purification ability, high strength and repeated regeneration. It is widely used in painting operations, ink printing, spray booths, etc. The diameter is usually 1.5, 2.0, 3.0, 4.0, 6.0, 8.0mm, and the commonly used diameter is 4.0mm. The iodine value is usually 450-1000mg/g, and the packaging usually is 25 kg bags or 500 kg/bag, It also can be customized.

Coconut shell based granular activated carbon is regarded as the best absorbent, which can be used in continuous process in areas like water treatment(drinking & effluent water), removal of mercury from effluents or alkali cells, solvent recovery, gold recovery, removal of odour, gas masks, as catalyst carrier, for dechlorination of water, purification & separation of gases, kitchen hoods, dry cleaning etc.

Activated carbon is a highly porous substance that attracts and holds organic chemicals inside it. It is a widespread adsorption media used in almost every industrial field. It is used in different applications such as purification (such as gas and water purification), recovery, decolorization, deodorization, separation, catalysis, catalytic support, and gas storage.
We offer a wide range of industry-leading activated carbon solutions, each with its own uses and applications, in three major product groups:
Powdered activated carbon (PAC)
Granular activated carbon (GAC)
Extruded activated carbon(EAC)