Find Verified Silicone Suppliers, Manufacturers and Wholesalers

A container for carrying semiconductor wafers/silicon wafers, resistant to acid, alkali, and corrosion (strong acid, strong fluoric acid, strong alkali), capable of laser engraving, and able to install RFID. Maintain tracking of carriers and materials.
Mainly used for cleaning, using, and transporting wafers in the acid-base process of semiconductor etching departments.
#wafercleaning #semiconductor #Newenergy #wafers

Specification(sheets or rolls):
A. Sheets: 500*500*0.7-1mm
B. Sheets or rolls: 500*1.5mm above
C. Sheets or rolls: 1000*2mm above
D. Sheets or rolls: 914.4*2mm above
E. Sheets or rolls: 1200*2mm above.
F. Sheets or rolls: 1500*2mm to 10mm
Conforms to the national profession standard: hg/t2949


Polybags and pallets

Material: 100% virginal silicone rubber
Quality: Food Grade
Size: 2mm x 4mm, 4mm x 6mm, 4mm x 7mm, 5mm x 8mm, 6mm x 9mm, 5mm x 9mm, 8mm x 12mm, 33mm x 45mm, etc
Package: cartons

Manta G700 is a blend of high molecular weight silicone elastomer and cyclic siloxane. It is a translucent silicone elastomer gel. The nature of its gel determines that this product cannot really dissolve in anything. In the oil phase, it can only exist in a stably dispersed form; this product can be used in a variety of cosmetic formulas such as water/oil emulsion, water/silicone oil emulsion, oil/water emulsion and anhydrous products to obtain dry, velvety smooth, Non-greasy skin feel.

Butyl Caulk Sealant is a neutral sealant compose of single butyl rubber with excellent properties of anti-aging/corrosion/oxidation, water resistance, tightness; wide range stretch of deformation and crack especially under low temperature circumstance.

Application:
Applies to all kinds of seams, holes and cracks in steel roofs; sun panels; windows and doors.It is also used widely for the car industry.

Tech Data:
Solid: 83%
Gravity: 1.4 0.1g/cm3
Service Temperature: -40 to 180
Lifetime: 20 years
Viscosity: 1800 300 dpa.s
UV Resistance: 2000 hours
Size: 300mL/cartridge or 25kg/drum

Made of high-purity resin Teflon, it is resistant to strong acids and alkalis, and can withstand high temperatures: -200~+250C. The surface is smooth, non-stick, and easy to clean. Wafer Container specifications and styles can be customized.

NE-5130 NE-5140 NE-5150 NE-5160 NE-5170 NE-5180
Appearance milky-white,light-yellow,light-gray
Density g/cm3
1.09í+0.05 1.13í+0.05 1.15í+0.05 1.18í+0.05 1.21í+0.05 1.25í+0.05
Hardness Shore A Points
30í+3 40í+3 50í+3 60í+3 70í+3 80í+3
Tensile Strength MPaí¦
5.0 6.0 7.0 7.0 6.5 6.0
Elongation at Breakage % í¦
440 380 320 280 200 150
Tension Set % í_
8 9 10 10 9 8
Tear Strength kN/m í¦
15 16 18 18 16 15

First vulcanization condition for test piece: 175íµí-5min
Vulcanizator: 80% DMDBH,quantity added 0.65%


20kg/box

KH-792 can display a good adhesion in the following systemú¦
RTV Silicones and Hybrid Silane-Crosslinked Sealants
KH-792 silane coupling agent with a single, two-component silane-crosslinked of the sealant can improve muti-substrate adhesion, including glass, steel, aluminum and concrete. This silane can dramatically enhance the adhesion to a wide array of plastics when used in combination with SPURSM Technology for silylating urethane polymers.
Polysufide Sealants
When added to one- and two-part polysulfide sealants, silane KH-792 provides better adhesion to a variety of substrates, including glass, aluminum and steel. Silane Dosage of KH-792 is 0.5 to 1.0 percent of sealant in general. It disperses well and produces cohesive failure in the sealant rather than adhesive failure of the bond between the sealant and the substrate. Furthermore, the use of silane KH-792 can not use primers which enhance the adhesion strength between the coating.
Plastic sealant
Silane KH-792(0.5 to 1.5 weight percent) as a replacement for polyaminoamide adhesion promoters in plastic sealants can improve bonding to metal substrates.
In addition to increased strength, the silane-modified plastic sealant has better appearance than a system that uses polyaminoamide adhesion promoters. Silane KH-792-modified plastic systems have a very light color, and the cured compound is bubble-free.
Additive in Phenolic and Epoxy Molding Compounds
Silane KH-792, as an additive in phenolic and epoxy molding compounds, reduces the water absorption of molded composites. So leads to improved wet electrical properties, particularly at low frequencies. High-temperature strength properties are also improved.


25 kg, 200kg plastic or iron drum

Product Description:
Chemical Name: N-(A-aminoethyl)-A-aminopropyltrimethoxysilane
Alias:[3-(2-Aminoethyl)aminopropyl]trimethoxysilane: DAMO
CAS NO. : 1760-24-3
Against other brands: EINECS No:217-164-6
Silquest A-1120
Dow Corning: Z-6020/OFS-6020
ShinEtsu: KBM-603
Wacker: GENIOSILGF 9/91

Specifications
Appearance : Colorless transparent liquid
Colour(Pt-Co) : 25
Specific Gravity20C, g/cm3 :1.010-1.030
Refractive Index :1.4425C1.4460
Purity% : 97.0

Applications:
USi-D1301 may be used as an additive, meeting the need of special primers in numerous bonding applications. USi-D1301 can display a good adhesion in the following system£º
RTV Silicones and Hybrid Silane-Cross-linked Sealants
USi-D1301 silane coupling agent with single-double component silane-cross-linked sealant can improve the adhesion of many substrates, including glass, steel, aluminum and concrete. This silane can dramatically enhance the adhesion to a wide array of plastics when used in combination with SPURSM Technology for silyl urethane polymers.

Polysulfide Sealants:
When silane USi-D1301 is added to single-double component polysulfide sealants, it provides better adhesion to a variety of substrates, including glass, aluminum and steel. Use dosage of Silane USi-D1301 is 0.5 to 1.0 percent of the sealant you use in general. It disperses well and can obtain cohesive split rather than interfacial split between the sealant and the substrate. Furthermore, the use of silane USi-D1301 can avoid using primers and it can enhance the adhesion strength between the coatings.

Plastic sealant:
In plastic sealants treatment, silane USi-D1301 (0.5 to 1.5 weight percent) as an adhesion promoter, a replacement for polyaminoamide, can improve bonding to metal substrates. In addition to increasing strength, the silane-modified plastic sealants have a better performance than systems those use polyaminoamide adhesion promoter. Silane USi-D1301 modified plastic systems have a very light color and the cured compound is bubble-free.

Additive in Phenolic and Epoxy Molding Compounds:
Silane USi-D1301, as an additive in phenolic and epoxy molding compounds, reduces the water absorption of molded composites. So it can improve wet electrical properties, particularly at low frequencies. High-temperature strength properties are also improved.


25 kg, 200kg plastic or iron drum.