Dlds-1508 industrial robot application training system consist of training platform, spare parts store, four axis berger lahr mechanical handling unit, ring assembly inspection mechanism, abb six joint industrial robot assembly sorting unit, visual detection device, finished product storehouse.
The main task of the device is based on mes management software, order demand, berger lahr robot grab the corresponding to red or yellow, blue button cap and other button assembly parts from the spare parts store. And the assembly part is placed in fixed position of ring assembly detecting mechanism. Then assembly structure detection is rotated 180 degrees, reach the assembly inspection station of robot with six degrees of freedom. Robot with six degrees of freedom carrying on the button assembly, after the completion of the assembly, the power supply mechanism send electricity to the button. The robot press the button, then through vision cameras to detect and judge the buttons color and quality, the six degree of freedom robot according to the data of the vision camera for classification. Thereby it is carried on the finished product store.
Model : NF5280M3
Processor : Support 2 Intel Xeon processors of E5-2600 series
Cache : 10MB, E5-2603, E5-2609
15MB, E5-262 E5-263 E5-2640
20MB, E5-265 E5-266 E5-2665, E5-267 E5-268 E5-2690
QPI bus rate : 6.4GT/s, E5-2603, E5-2609
7.2GT/s, E5-262 E5-263 E5-2640
8.0GT/s, E5-265 E5-266 E5-2665, E5-267 E5-268 E5-2690
Chipset : Intel C600 server chipset
Memory : 24 DIMM, DDR3-1600 up to 512GB (32 GB per DIMM
Support advanced memory ECC, Mirror, sparing.
HDD controller : Integrated SATA controller, optional 8 channel SAS 3Gb/6 Gb disk controller
RAID : Integrated SATA controller supports RAID 0/1/10/5
SAS controller support RAID 0/1/10, optional support RAID 5 50;
Optional support RAID 0/1/5/6/10/50/60, with high performance SAS RAID controller which has cache and cache protection battery
Storage : Up to support 24 pieces of hot-swap 2.5 inch SATA/SAS or SSD
Expansion Slots : 1 PCI-E 3.0 x16 4 PCI-E 3.0 x8
(If only configure 1 processor, 1 PCI-E 3.0 x16 2 PCI-E 3.0 x8 available)
I/O interfaces : Front 2 USB interfaces
Rear 4 USB interfaces 1 standard VGA interface 1 serial interface 2 or 4 RJ45 GbE Ethernet interfaces 1 RJ45 Ethernet interface only for management, optional 2 RJ45 10GbE Ethernet interfaces
Built-in 1 serial interface, 2 USB interfaces
Network controller : Integrated 2 or 4 Gigabit network interfaces; support Virtualization Accelerator, network Accelerator, network redundancy and load balance, and two more optional 10GbE interfaces.
Power Supply : 600W or 700W Power, optional 1+1 Redundant, optional support PMbus Power
Graphics card : Integrated 16MB memory video controller
CD-ROM : 8 or16 bays model with Slim DVD-RW
24 bays model optional with external USB DVD-RW
Floppy Drive : Support optional virtual floppy drive of USB interface which based on flash memory
Management Features : Integrated system management chipset, support IPMI2.0, KVM over IP, virtual media; support Inspur Ruijie series server management and deployment software.
Optional LCD management module, with visual system monitor and fault diagnosis module
OS supported : Microsoft Windows Server 2008 SP1 32/64bit
Windows 2003 Enterprise with SP2 32/64bit
Red Hat Enterprise Linux 5U3 32/64bit,
SuSE Linux Enterprise Server 10 SP2 32/64bit
SuSE Linux Enterprise Server 11 32/64Bit
Operating Temperature : 5
AC input : 110-240V
International Certification : ISO9001 International Quality Management System
ISO14001 International Environment Management System.
(more sizes for choice:1300*1300mm, 600*900mm, 2000*3000mm, 3000*4000mm with Epson DX7 and Seiko SPT1020/1024GS ,Ricoh GH2220/Gen5 printhead UV Flatbed printer.)
Denifition:
Flatbed Digital printing is the reproduction of digital images using inkjet printing, typically on plastic or paperboard, although a wide variety of materials can be printed (common, photographic paper, film, cloth, plastic, etc.). Flatbed digital printers use inks made of acrylic monomers that are then exposed to strong UV-light to cure, or polymerize them. This process allows for printing on a wide variety of surfaces such as wood or metal, carpet, tile, and even glass. The adjustable printing bed makes it possible to print on surfaces ranging in thickness from a sheet of paper often up to as much as several inches.
Features:
1. Equipped with Imported ESPON DX7 heads with 180 nozzles 8 channels.
2. With 2-4 heads for high speed and high quality.
3.12sqm/hr-24sqm/hr for production printing.
4.White ink circulation system to avoid white ink precipitating
5.6 zones vacuum table for easy operation and save energy.
6.Water circulating cooling system for UV LED lamps.
Product Model: YC2513
Printhead:Seiko SPT2014GS 5heads
Price:$27900/SET FOB Qingdao seaport,China by sea
Print speed:16-30sqm/hr
Print Size: 2.5m*1.3m
Print material: glass/metal/plastic/pvc/Acrylic/ceramic tile/wood board and etc.
Payment terms: 50% T/T in advance,last 50% T/T before shipment.
Delivery time:Within 3-5days after receive your payment.
Validity time:10days
Product Features:
1. Equiped with Imported Industrial printhead with 1024nozzles
2. Fast fiber data trasmission technology
3.With 5 heads for bright color, suitable for high speed and high quality industrial production
4.16sqm/h-25sqm/h for production printing
5.White ink circulation system to avoid white ink precipitating
6.6 zones vacuum table for easy operation and save energy
7.Long-lasting UV LED lamps are safe, energy efficient and generate minimum heat;
8.Double guide and double leadscrew is used for a stable and precise movement.
Application of machine:
The UV flatbed printer is used to print on glass, ceramic tile, PVC ceiling, aluminum sheet, wood MDF board, metal panel, billboard, acrylic panel, paper board, foam board, PVC expansion board, corrugated cardboard, bamboo fiber board etc; and for flexible materials such as PVC, canvas, leather etc.
