High Precision Wedge Wire Screen Filter Pipe Wedge Wire Pipe /Tube/Cylinder Wedge Wire Screen
Wedge Wire Screen Filter Pipe FEATURES
Wedge wire screen also named as stainless steel V shaped wire screen, Johnson screen , Water well screen, Rod based wire wrapped screen, Wedge wire screen pipe etc.
stainless steel wedge wire screen pipe PARAMETER
Characteristics:
1. Many varied applications in sieving, sorting and separating.
2. Wedge Wire surface is self-cleaning.
3. Various construction types:From outside to inside, or from inside to outside.
4. Wedge Wire on Vee shaped bars for light duty.
5. Wedge Wire on fins for medium or heavy duty.
6. Grates edged with flat bar or angle.
7. Highly polished grates for wet areas, bars or bench tops.
8. Heavy grids and support bar systems for absorption vessels.
9. Grates and grids made as single or multi-part items.
10. Materials to suit applications (Stainless steel 304 or 316, mild steel etc)
High Precision Wedge Wire Screen CONFIGURATION
Wedge Wire Johnson Screen Filter
Specification (Profile wire): Width(mm): 1.0 1.2 1.5 2.0 2.2 3.0 3.2
Height(mm): 2.0 2.5 3.5 4.6 5.0 6.0
Specification (support rods): Width(mm): 2.0 3.0
Height(mm): 3.0 4.6 5.0 6.0 7.0
Round: From 2.50mm to 6.0mm
Note: other wires and rods available upon request
Slot size 0.10, 0.15, 0.20, 0.25, 0.30�� 100mm also achieved upon request.
Material: Stainless steel 304, 304L, 316L ,321 etc.)
Length Upto 4 meters
Diameter 29-1200mm
Screen end Plain beveled ends, male/female threaded, flange, close up.
Other sizes available on request.
Advantage Reduce energy consumption and increase water flow.Reduce erosion of entry surfaces and increase well life.Allow a uniform and efficient well development.Reduce significantly potential pump damage and subsequent maintenance costs.
1.This machine adopts synchronous control technique, both welding time and cent-control welding is supervised by ipc ( industrial computer and chassis).
2.It adopts modularization design, so it is easy to improve the machine's function and feacure.
3. The line wires are fed automatically and continously, so it saves much welding time to wait. Feeding position is accurate, the edges are regular and also could be adjustable.
4. There is a big hopper for cross wires, it could contain one ton wires, in this case, it saves much labor to add wires. 0v
Overall dimention:20*5*2.3m
Gwc-2500d (5-12
Wire diameter:5-12 Number of electrodes:24
Space of line wire:100-200 Space of cross wire:50-200
Welding speed:50 times /min Rated voltage:380v
Width of mesh:2500mm Rated electrical power:12*125kva
Overall dimention:20*5*2.3m
Contace person :anny
Website: www.Weldingmachine.Cn
Tel:15803186013
Hebei jiaoyang wire mesh machine co., ltd.
Website: www.Weldingmachine.Cn
Post code:053600
The main welding machine is pocked by plastic and spare parts is parked by wooden box
Machine performances & parameters
1, this machine adopts synchronous control technique, both welding times and seperate welding are controlled by digital plc system with touch screen, so that the operation is more intelligent, reasonable and has a copression,
Wire straightening and cutting machine
Wire diameter : 3-6mm
Speed: 110m per min
Length: max 12m
Function features:
1. High speed: this machine can reach high speed 110 m/min3 or 4 times of the normal one.
2. Accurate cutting precision: this is the outstanding advantage of our machine and the tolerance of cutting length is ±1mm.
3. Finished wire length can be as short as 0.8m and as long as 12m which is suitable for most wire mesh fence.
4. Easy operation: the machine is fully automatic and only one person is enough for operation.
5. Smooth working process: precise machine part and strict quality control making sooth working for long time.
The main parameter:
Diameter 3-6mm
Length 0.8-12m
Electric machinery 4kw
Speed 110m/min
Size(l× w× h) 7.6m×1.1m×1m
Product description: is a new fence, razor wire is corrosion-resistant galvanized steel or stainless steel as raw material processed. Is one of the most popular high-level protection of metal construction materials.
Material: galvanized steel or stainless steel wire + + line.
Weaving: twist and weaving.
Features: beautiful, strong, corrosion, oxidation, excellent protection, deterrent effect.
Uses: widely used in military, prisons, detention centers, government buildings and pasture boundary, railway, highway isolated protection, etc.
5kg/roll 25kg /roll 50kg/roll bto-22 package by carton , wolve bag …
This machine is a new model equipment designed by this company. Can automatically weave the weft wire and warp wire together. The grassland fence produced has the features of innovative structure, firmness, precision and reliable property. The productive capacity can be 150m/h.
Sending wire with full automatic, applicable to low-carbon steel wire body machine, design reasonable, less noise , easier operate, non-polar adjust the number of welding.
Mainly used for the construction mesh.
Welding wire diameter ª¦0.4-ª¦1.2ú¿mmú¬
Welding mesh size 1/4íS-2íS
Welding width 600-1220ú¿mmú¬
Speed of welding 100 times/min
Nominal voltage 380v 3 phase electric 50HZ
Nominal power 56KVA
Exterior size 2500í-1500í-1200
Weight of machine 1800ú¿kgú¬
Our factory's pulley continues draw bench the pulley continuous wire drawing machine has a simple structure, low cost, easy to operate and so on. Specifications suitable for drawing a variety of fine metal wire, especially suitable for drawing low-carbon steel wire, galvanized wire, tire steel wire, stainless steel wire, hose steel wire, spring steel wire, welding wire as well as aluminum pole, copper wire etc. Scope of application: gas security wire, welding electrode wire, stainless steel wire, galvanized iron wire, medium and high-carbon steel wire, copper wire, wire and other metal products used etc.,
The production of straight-type wire drawing machine which our company produced with electronic control system based on inverter technology, the realization of the adaptive and other advanced PID control, the use of field bus or digital-to-analog conversion technology, equipment, high-performance, high reliability operation. Its characteristics: high-speed, high efficiency, low-cost, low consumption, simple operation, process adaptability, can be any combination of user requirements in accordance with a high degree of automation.
The products for use in high-cord, wire wheels, wire rope, gas protection welding wire, stainless steel wire, steel wire umbrella unit, PC steel wire and so on.
Water tank type wire drawing machine the production of the water tank type wire drawing machine is used in wire-drawing of low, medium and high carbon steel wire, stainless steel wire, prestressed steel wire, alloy steel and so on. The equipment for steel cord, hose wire, spring steel, tempered steel wire tires, gas protection welding wire, and stainless steel wire.
The series gabion mesh machines have been designed to make gabion mesh of various widths and mesh sizes. The possible coatings are heavily galvanized and zinc. For high corrosion resistance, zinc and PVC, galfan coated wire is available.
1.Width scope of weaving: 1-4m
Wire scope of weaving: 2-4mm
Mesh scope of weaving: 30-100mm
With 3 sets of mesh model at buyer's requirements
2.The machine is controlled by plc automatic controller, so only one person is needed to operate it 3.The output per minute: for example: if the mesh is 50x50mm, width: 2m, the output will be: 1m2 min.
4.Suitable wire to the machine: the tensile scope of the wire 300-500n/m2
5.Use compacting machine to make it into rolls
6.Total power of equipment 11kw
7.Weight of equipment: 4200kg
8.Outside size: main machine: 6700x1430x1800mm.
1, Max. speed can be 65 mesh per minute, speed can be adjusted with different raw materials.
2, Smooth operation, low noise. It will give an alarm at broken wire, broken mesh or at preset length.
3, Big width. It can weave double 1.25 m or single 2.5 m width.
4, Even and flat openings, wire can be added at any spot when weaving.
5, It has clutch brake device, can move by spot, flexible operation and has no high demand for operating personnel.
6, Reliable lubrication and convenient use.
7, Durable and strong, convenient maintenance.
Detailed Product Description Specifications:
1) Power of direct-current motor: 4kW
2) Exterior size of main machine: 2500 x 60 x 1600mm
3) Weight: about 1300kg
4) Exterior size of wire drawing frame: 3800 x 900 x 1200mm
5) Weight: about 1200kg
6) Exterior size of wire winding machine: 2000 x 1400 x 1100mm
7) Weight: about 600kg
8) Total power: 55kW
9) Exterior size of payoff reel: 1900 x 450 x 1000mm.
KB25 series expended metal sheet punching and shearing machine (metal dragnet machine)and flat screen machine, al-drawing bench have a high technology content , strong practicability, not only to produce expandede metal sheet, aluminium expanded sheet , but also to produce titanium mesh plate, copper plate mesh and any other materials of expanded metal, including kinds of ordinary chain link fence below 8mm.
Kb series of flat screen machine , al-drawing bench have a high technology content , strong practicability , not only to produce expanded metal sheet, aluminium expanded sheet , but also to produce titanium mesh plate , copper plate mesh and any other materials of expanded metal , including kinds if ordinary chain link fence below 8mm.
133 Welding Wire Mesh Machinery Suppliers
Short on time? Let Welding Wire Mesh Machinery sellers contact you.
