KB25 series expended metal sheet punching and shearing machine (metal dragnet machine)and flat screen machine, al-drawing bench have a high technology content , strong practicability, not only to produce expandede metal sheet, aluminium expanded sheet , but also to produce titanium mesh plate, copper plate mesh and any other materials of expanded metal, including kinds of ordinary chain link fence below 8mm.
Punching and Shearing Machine Smaller body, powerful functions, concise and perfect appearance, it is not inferior to an ideal punching and shearing equipment; the biggest advantage of the multifunctional punching and shearing machine is simple operation, flexible movement, high punching and shearing efficiency, and smooth and non-marking cross-section. , The failure rate is extremely low, and the service life is long.
Supplier: Cnc copper busbar machine, bus bar bending punching shearing machine, wire winding machine, automatic coil winding machine
Supplier: Turret punch machine, press brake, shear, press, bending machine, rolling machine
Supplier: X-ray linquid inspection machine, punching machine, shearing machine, bending machine, machinery for the solar water heater
O bending : back bending mode U bending : front bending mode Special bending: composition mode Item Force (Tons) Max. thickness Plate Width (mm) Diameter of upper roller (mm) Diameter of lower roller (mm) Central distance (mm) Motor(kw) End Bending (mm) Central (mm) driving hydraulic shift PR-15*2000 75 12 15 2000 255 150 245 7.5 4 1.1 PR-14*2500 75 10 14 2500 270 150 245 7.5 4 1.1 PR-20*3000 160 16 20 3000 375 200 330 18.5 7.5 2.2 PR-24*2500 190 20 24 2500 380 220 360 22 7.5 4 PR-26*4000 320 22 26 4000 520 260 420 37 15 5.5 PR-33*2500 270 28 33 2500 430 250 400 30 11 4 PR-32*3500 380 28 32 3500 530 275 460 45 22 5.5 PR-36*3500 430 30 36 3500 560 290 5000 55 22 7.5 Item Force (Tons) Max. thickness Plate Width (mm) Diameter of upper roller (mm) Diameter of lower roller (mm) Central distance (mm) Motor(kw) End Bending (mm) Central (mm) driving hydraulic shift PR-15*2000 75 12 15 2000 255 150 245 7.5 4 1.1 PR-14*2500 75 10 14 2500 270 150 245 7.5 4 1.1 PR-20*3000 160 16 20 3000 375 200 330 18.5 7.5 2.2 PR-24*2500 190 20 24 2500 380 220 360 22 7.5 4 PR-26*4000 320 22 26 4000 520 260 420 37 15 5.5 PR-33*2500 270 28 33 2500 430 250 400 30 11 4 PR-32*3500 380 28 32 3500 530 275 460 45 22 5.5 PR-36*3500 430 30 36 3500 560 290 5000 55 22 7.5
Supplier: Cranck shears with inclined throat. Suitable to work in high/low temperature environment. Drilling rig, centering skids
Services: Manufacture, repair all types of metal working equipment
Buyer: Press brakes, welding equipment
Shearing Machines Salient Features: * Shearing Blades are made out of a special grade steel. * Heavy gear- pinion, pully and drive shaft. * Easy to operate continuously. * The above data are indicative and not binding. Optional Features: * Shearing Blades can be provided extra against cost. * The Shearing size can be modified as per your requirement, accepting the same under the sole discretion of HEW.
Features: CK6125f=CK6125-1 type CNC controlled lathe is used to turning inner outer cylindrical surface, end surface, taper surface and thread of shaft etc., with highly efficient and precision working. The Tools is adopted gang-type tool apron, Turning tool can be fitted 4-6, it also can be fitted 4 position motor compound rest according to customers requests. The CNC control is adopted with Beijing KND-100T system or Guangzhou CNC 980TA/TD and be fitted with different CNC system according to customers requests. The spindle drive speed is adjusted by alterantion and frequency conversion, it realized permanent speed turning. The machine tool adopted sliding guide ways. X and Z axes leading screws are adopted 2 gradation accuracy ball screws, the accuracy of leading screws is most high grade in domestic made in HANJIANG screw & guide works. The leading screw is in center type (it is fitted in center of bed), torque was eliminated, transmissive stability was raised. The lathe is adopted whole modular cast, it is treated aging, so that cast is not deformation, with this result supporting rigidity increase, and raise turning stability. The leading screw of bed was protect with straight plate (non-folding protective shield), as a result protection water and protection of chips was raised. The machine tool guide way and leading screws are both lubricated periodically. The machine tool is protected entirely closed, compact construction, with small area. CK6125 the spindle supporter are adopted with pre-loading accurate and angular contact ball bearings(assembly by bearing works),CK6125-1 the spindle supporter is adopted with pre-loading accurate and angular contact ball bearings (assembly by bearing works), and with double cylindrical roll bearing. They can be acquire to optimize compound with high precision, high rigidity, high load bearing ability and turning speed. The machine tool has been fitted hydraulic tank, it is adopted hydraulic-clamping collet chuck device (or CK6125 can be fixed »135 chuck with through hole; CK6125-1 can be fixed »160 chuck with through hole), can be fixed feeding support device in the form of weigh or hydraulic support device of automatic feeding, and so it adapts process automation. If it not suitable for you, you may go to our website pngindustrial.com to find out which you like type machine. Gross weight of machine: 1.5T Net weight: 1.34T Size of packing(L*W*H): 1800*1420*1860mm
We are offering hex cutter machine for food ( bee products and other ) Hex cutting productivity with 1 form D206mm can make 31 pcs 1 punch Equipment dimension: ~2000 x 700mm x 500mm
