1. Voltage: 110-240v
2. Power: 1500W.
3. PTC heating elements, instant warm
4. Anti-burned grid , no hurt touch
5. Super silent motor, enjoy a quiet and pleasant night.
6. Fall down - Power off design.
7. Two power choice: 750W / 1500W.
8. Removable Base, load more quantites.
Model No YQ0977
Product 900W Portable Room Wall Mounted Electric Heater
product size 11.5 9.5 16.5cm
Idle speed of fan 4500(LOW)-5000(HIGH) RPM
Voltage Rating 220 240V(50Hz 60Hz)
Color Black
Maximum heating area 10 Square meter-20 Square meter
Display screen LED screen
Set Temperature 15-32
Air supply method Plastic DC Fan
Weight 0.6KG
silicone rubber heater is a kind of thin film which heats upon electrified, in a standard thickness of 1.5mm, Adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high-temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers.
Specification
This product mainly consists of alloy electric heating wires and silicone rubber high temperature insulating cloth,it generates heat rapidly with even temperature,high heat efficiency &good toughness,it conforms to American UL94-V0 grade flammability standard, it is easy to use,safe and water-proof,the aging life can be as long as 5 years.
Technical Parameters
1) The maximum temperature resistance of the insulating material:250C
2) Highest service temperature:250 C-300C
3) Insulating resistance:5M
4) Compressive strength:1500v/5s
5) Power deviation rate:±8%
6) High voltage resistance:>5KV
7)Maximum 1000mm 8000mm minimum 20mm, 20mm thickness1.5mm (thinness 0.8mm,thickness 4mm)lead wire length: Standard 200mm, in case
that the above dimensions are exceeded, please contact with our company.
Features
1) Designed according to actual shape and dimensions, including three-dimensional
geometry to meet the requirement of your equipment
2) Moisture-proof and non-slip silicone rubber material offers longer working life of heaters
3) Simply sticking to your components through sulfuration, adhesive or fixer
Silicone Carbide heaters (SiC) is a non metal electric heating element made from SiC and its main raw materials. It has some specific properties such as low expansion coefficient, little deformation, stable chemical property, long service life and is very easy to install. SiC elements are used in applications ranging from below 600�°C up to 1600�°C in both air and controlled atmospheres and are commonly used in furnaces.
Since there are no standard furnaces, SiC heaters come in a variety of shapes and sizes and can be both used vertically or horizontally.
The surface load of SiC heaters is in direct relation with the life of SiC heaters and therefore it is necessary to control the surface load within the range when heating.
Our company can provide "m" type, "u" type, "h" and straight-type silicon carbide rod type, you can buy various types of furnaces according to the actual situation, different specifications of silicon carbide, if there are special needs, It can be resolved through consultation.research, etc.
Silicon-carbon rods have the characteristics of high temperature resistance, oxidation resistance, corrosion resistance, fast heating, long service life, small high temperature deformation, convenient installation and maintenance, and good chemical stability.
Matched with the automatic electric control system, the accurate constant temperature can be obtained, and the temperature can be adjusted automatically according to the curve according to the needs of the production process.
Heating with silicon-carbon rods is not only convenient, but also safe and reliable.
It has been widely used in high temperature fields such as electronics, magnetic materials, powder metallurgy, ceramics, glass, semiconductors, analytical testing, scientific research and so on. it has become the electric heating element of tunnel kiln, roller kiln, glass furnace, vacuum furnace, muffle furnace, smelting furnace and all kinds of heating equipment.
Sheath/Casing materials:SUS304/ SUS321/ SUS316/ SUS316L/ SUS310S/ Incoloy800/ Incoloy840/ Copper/ Titanium
Lead Options:Flexible Leads(Internally)/ Externally Connected Leads/ Straight Leads with Clip Support/ 90° Leads/ 90° Leads with Clip
Material of Lead Wire/Cable:Silicone cable /Silicone fiberglass cable/Pure Nickel Cable/Teflon cable/PVC cable and Special Cable
Lead Protection:Straight Strain Relief Spring/ Stainless Steel Braid/ Stainless Steel Armor/ Right Angle Elbow/
End cap:Ceramic end (standard)/ Cement/ Epoxy/ R
These ceramic heating elements can be used as spare parts for industrial heating gun, Hot air gun ,Plastic Welding Gun,and Hot wind machine.
No matter Where you come from and No matter What type of heating elements you need, Hope we can help you save cost, increase efficiency and enlarge marketing.
Product Name: Air heater
Item No: E-serie
Rated Voltage: 12V/24V
Rated Power: 4500W/4000W/3000W/2000W
Type of Moter: Brushed
Life Time of Motor: 2000h
Weight:Â 5.75Â KGS
Dimension: 372*141*150(175)mm
Product Name: Air heater
Item No: W-serie
Rated Voltage: 12V/24V
Rated Power: 5500W/4000W
Type of Moter: Brushless
Life Time of Motor: 20000h
Weight:Â 5.75Â KGS
Dimension: 425*148*162(200)mm
We are electric blanket factory in Qingdao, China. We can provide CE/GS/CB/BSCI/UL Approved Machine Washable Electric throw/under Blanket :With auto timer; thermostat function; two helix heated wire; much more healthy, convenient,comfortable and energy-efficiency.
Security settings:
Protect against-
Child operation
Shock
Overheat (inside & outside)
CO&CO2 over standard (require extra charge)
Unqualified combustion
Blackouts
Power failure
36h continuous operation
Remind you to -
Ventilate the room
Refuel the tank
Other-
Automatic cooling down itself after operation
Detailed specifications:
Fuel: odorless kerosene
Fuel consumption:
Maximum 0.325l/h (250g/h)
Average 0.205l/h (158g/h)
Minimum 0.086l/h (67g/h)
Heating output:
Maximum3000 w(10300 btu)
Average1900 w(6485 btu)
Minimum800w (2730 btu)
Electric power:
Maximum550w
Minimum40w
Operating autonomy:
At high power16.3 hours
At low power65 hours
Noise:
At high power35 db
At low power24 db
Ampere: 0.6a-2.5a
Security settings:
Protect against-
Child operation
Shock
Overheat (inside & outside)
Co&co2 over standard (require extra charge)
Unqualified combustion
Blackouts
Power failure
36h continuous operation
Remind you to-
Ventilate the room
Refuel the tank
Other-
Automatic cooling down itself after operation
Product size(in mm)l*w*h400*307*470
Cartoon size(in mm)l*w*h433*340*512
Weight: 12 kg
Detailed specifications:
Fuel: odorless kerosene
Fuel consumption:
Maximum 0.325l/h (250g/h)
Average 0.205l/h (158g/h)
Minimum 0.086l/h (67g/h)
Heating output:
Maximum3000 w(10300 btu)
Average1900 w(6485 btu)
Minimum800w (2730 btu)
Electric power:
Maximum550w
Minimum40w
Operating autonomy:
At high power16.3 hours
At low power65 hours
Noise:
At high power35 db
At low power24 db
Ampere: 0.6a-2.5a
