Find Verified Caps Suppliers, Manufacturers and Wholesalers

Closure caps /disk caps/Flip cover/Screw cap

1.Three steps temperature control to ensure the temperature stable of inside furnace.
2.Fast increasing the temperature with thermostat control to keep the set temperature stable.
3.Stable wire guide system and rapid ceramic guide rollers to increase tinning efficient and ensure excellent in quality.

pp pleated filter cartridge deliver high effciency and consistent filtration of fluids in the food
and beverage industry. They are constructed of pleated membrane filter media that provides
removal of partical from 0.1 to 60 micron,the pore size is not affected by the vibration of feeding
pressure,due to its uique low differential pressure,high flow volume,excellent filtration microns.
FEATURE
1.Pleated cartridge increase the filtration area for deep filtration.
2.High dirt holding capacity.
3.Large flow rate volum, low differential pressure and long service life.
4.The single open ended (SOE) configuration easy installation into sanitary housings.
Product Description :
Product Name PleatedFilter cartridge
Color White
Outer diameter 69mm,or customized
Length 10"20"30"40"or customized
Brand Lvyuan orOEM/ODM
Removal rate 0.1,0.2,0.45,0.65,0.8,1,2,3,5,10,20,25,30,50,60 micron
Max.Bear temperature 88ºC,0.28Mpa;60ºC,0.42Mpa
Material
Filter media PP/PTFE/PES/PVDF/Nylon
Support PP
End caps Polypropylene(PP)
Gasket/O ring material Silicone ,EPDM,NBR,Vi ton,Teflon etc

code CUSTOMIZED
with years of professional experience in 5 kinds of filter media pleated filter cartridge,we can provide customized product with varied specification and multiple adaptor options.

Aluminum sheets/coils
1.Alloy:8011
2.Temper:H22/H24 etc
3.Thickness:0.15-0.25 mm
4.Width:500-1000mm or as per customers requirement
5.Property:anti-corrosion heat resistant
6.Production process:cold rolled/hot rolled
7.Standard:GB/T 3880-2012
8.Certificate:FDA/SGS/ISO/ASTM/CO
9.Surface:mill finish no stains without rough selvedge
10.Application:solar reflective mirror machine/construction/lampshade/decoration materials/furniture materials/industry/wine caps/trim caps/medical bottle caps etc
11.Origin:China mainland
12.Delivery timeï¼?30-35 days
13.Payment termsï¼?T/T,L/C at sight,D/A,D/P

Name: Capsule water-based varnish
Model: H-8006
Use: capsule varnish , for plastic and paper package.

Description: H-8006 is using a variety of specialty monomers synthesized varnish which used for plastic. This product has good fluidity, easy to operate, fast drying, and high brightness. Suitable for PET, the adhesion between the film and paper. Applied to paper, plastic bonding with a solid.

Appearance: milky white liquid,
Solid content 40%
Viscosity (seconds): 13 ~ 14, (3 cup, 25 ),
Gloss: 55 5


Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 .
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.







Package:
25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.

We can produce carbon steel pipe, carbon steel pipes, carbon pipe, black carbon steel pipe, carbon seamless steel pipe, hot rolled carbon steel pipe, api carbon steel pipe, welcome u and u team come to visit at any time.

We can produce carbon steel pipes according to various standards: api 5l, astma106, din2448/1629, en10216-2, en 10255etc.
Our pipes are used for conveyance of gas, petroleum, liquid, and electricity for boilers, chemical industries, petroleum cracking, and construction.
Size: 114mm to 965mm
Ends: beveled, threaded, square cut
Materials: according to customer's requirements
Packing: balck painted, caps , be or pe
Delivery time: within 7 days
Payment terms: l/c at sight or t/t

If u have any questions, pls feel free to contact sharon







Astm, jis, en, bs, gost, gb

Our mill produce carbon steel seamless pipe/carbon steel seamless pipes/carbon steel seamless pipe mill/seamless pipe/carbon seamless steel pipes/carbon seamless pipes/carbon seamless steel pipe/carbon steel pipe/steel seamless pipe/carbon hot rolled seamless steel pipe/carbon astm a53 seamless steel pipe/carbon astm a106 seamless steel pipe, astm seamless steel pipe .Welcome u and u team come to visit.


Product origin: china
Brand name: zh
Price terms: cfr, cif
Supply ability: 20000mt/month
Minimum order: 10mt
Delivery lead time: 30 days

1) sizes (o. D. ): 219mm-914mm*4mm-50mm
2) standards: gb/t8163, astm a53, astm a106, api5l, en10216-1
3) grade: a, b, api, x42, x52, x60, p195tr2, 9235tr2, p265tr2
4) surface: oiled or black painted to prevent rust
5) marking: as per customer's requirements
6) application: structure steel pipe, piling pipe, sewage and clear water transportation. Line pipe for petroleum

Inner packing: caps on two ends of every pipe.
Outer packing: in hexagonal shape bundles wrapped with strong steel strip 2mt/bundle




Bundle or bulk, oiled or black painted to prevent rust