Find Verified Electrical Household Other Goods Components Suppliers, Manufacturers and Wholesalers

Nomex Spacer Sleeve Felt For Aging Furnace
Descriptionï¼?
Our Felt Spacer Sleeve is made of 100 % Nomex fiber through the acupuncture process,it could be resistant to 280 degrees high temperature. Before put the aluminum profile into the Aging Oven,it should cover with the felt sleeve,and then put them between two layers of aluminum profile, that not only could protect the profile from scratches, but also to maintain good air circulation. Our Felt Spacer Sleeve with high temperature,wear-resistant,incision smooth,uniform thickness, non-fuzz, no line of exposure, no explosion edge, pollution-free aluminum profile.

Specification
Color:Yellow
Technology:Needled punched
Material:Nomex
Material Feature:Heat Resistant
Thickness:6mm,8mm,10mm
Width:20-2000mm
Length:540-13500mm
Continual temperature:150â??
Peaking temperature:280â??
Usage:aluminum extrusion lines

Advantagesï¼?
Heat resistance
No fuzziness with uniqure Hot Iron technics
No seam broken with exquisite workmanship
Abrasion resistance with smooth cutting and even surface
Pollution-free to profiles

Application
Product utilize 100% Nomex material acupuncture,used for aging furnace,preventing the aluminum profile from being damaged.
Aging Furnace: used as covering for the spacer bars placed between two layers of profiles in the aging furnace so as to keep the profiles from scratches and also maintain good ventilation
Used to protect aluminum from being scraped and keep the aluminum maintain good ventilation

Materials: Low carbon steel wire, stainless steel wire or brass wire.
Processing: Twisted before galvanized, weaving after galvanized. Electro galvanized, hot dipped, plastic-coated, stainless steel, PVC coated, etc.
Weaving type avaliable include: Straight twist, reverse twist, double-direction twist.
Finishes of Hexagonal Wire Netting can be:
• Galvanized after weaving ,galvanized before weaving ,
• PVC coated galvanized
• Hot-dipped galvanized
• Electro galvanized

In addition to the cable metal mesh and crimped metal mesh, flat wire woven mesh is also can be used for building facade cladding. But, it can provide big privacy protection and has a quite different look to other meshes. This is because instead of being woven from round wires, the woven wire mesh is made of stainless steel flat wires. The flat wires create a larger surface area which reduce the transparency but provide a very sleek homogeneous appearance. The flat wire woven mesh facade is incredibly strong and robust. And the choice of warp and weft wires as well as the type of weave create a kind of different mesh with specific optics and light effects. With the low open area, the wire mesh is still open enough to provide adequate airflow to allow for natural ventilation.

Besides, it can be painted for different colors to attract more attention and the painted mesh is incredibly durable, weather-resistant and virtually no maintenance. We can offer you various sizes of flat wire woven facade mesh to meet your different needs.

Flat wire woven mesh with 6.4mm warp pitch.
Flat Wire Woven Mesh FWWM-1
Material: stainless steel wire 304/316/316L.
Warp diameter: 2.7mm 1.6mm.
Warp pitch: 6.4mm.
Weft diameter: 2.7mm .6mm.
Weft pitch: 6.4mm.Flat wire woven mesh with 12mm warp pitch.
Flat Wire Woven Mesh FWWM-2

Weft pitch: 6.15mm.Woven wire mesh with 9mm weft pitch.
Flat Wire Woven Mesh FWWM-4
Material: stainless steel wire 304/316/316L.



A low level of transparency.
Durable, made of robust mesh.
Have a very sleek homogeneous appearance.
Particularly suitable for facades requiring reduced transparency.
Functionality, and offer protection for the building.
Application

The flat wire woven facade cladding mesh with square opening is specially developed to do the exterior facade for some projects, which need to reduce transparency. This type wire mesh facade can achieve the attractive light reflection and at the same time establish a new identity for the building.

Flat wire woven mesh can be used as exterior facade.
Flat wire woven mesh has a very sleek homogeneous appearance.Stainless steel and brass type flat wire woven mesh is installed on the facade of building.
Flat wire woven mesh is widely used as facade cladding in the buildings.

Polyurethane fine screen mesh for fine particle separations

Polyurethane fine screen mesh is made of polyurethane sheet with high quality screen surface. Polyurethane fine screen mesh is abrasion resistance and much longer service life than the woven vibrating screen mesh. Moreover, the property of anti-blinding makes it feasible to screen materials which is considered difficult or impossible to screen previously. Polyurethane fine screen mesh has an extremely fine openings which is as fine as 0.1mm, which is suitable for a wide variety of wet and dry applications.

A piece of red polyurethane fine screen mesh on the white background
Polyurethane fine screen mesh has extremely fine openings for accurate separation.
Polyurethane fine screen mesh with low noise and low maintenance, is the replacement products of perforated vibrating screen mesh. Additional, the polyurethane fine screen mesh has higher wear resistance and acid and alkali resistance than the woven vibrating screen mesh.

The stainless steel wedged wire mesh filter uses metal wedge wire mesh as the filter element, which has the advantages of high mechanical strength, high pressure difference resistance, and easy flushing and regeneration; the nearly two-dimensional filter has no dead spots for particle accumulation, and the wedge-shaped gaps can be gathered during backwashing. Backwashing energy, backwashing effect is good.
The stainless steel wedged wire mesh filter element is easy to leak, wear-resistant and corrosion-resistant. The mesh has a trapezoidal cross section, and the gap is large at the bottom and narrow at the top. The whole wedge mesh is welded by wedge wire and supporting structure. There is an appropriate line spacing between the wedge wires arranged in parallel, which determines the filtration area.
Product Parameters
Brand: TOPTITECH
Material: SS304, SS316L
Filtration accuracy: 25um-800um
Operating pressure: 5Mpa
Shape: Flat, Cylindrical
Features
1.Strong mechanical construction, able to tolerate significant pressure variations;
2.The filter gap is consistent, allowing for the formation of a fairly homogenous filter cake that is helpful for backwash regeneration;
3. Strong backwash regeneration ability;
4. Pressure-resistant, temperature-resistant, corrosion-resistant, applicable to various fluids.
Applications
Stainless steel wedged wire mesh filter elements are widely used in drinking water treatment, building circulating water treatment, industrial circulating water treatment, sewage treatment, mining industry water treatment, golf course water treatment, construction, steel, petroleum, chemical industry, electronics, power generation, textile, paper making , food, sugar, pharmaceuticals, plastics, automotive industries and other fields.
1.The petrochemical industry, which uses catalytic reaction, hydrodesulfurization, styrene dehydrogenation, ammonia conversion, isomerization, and other up-down and radial flow processes;
2. Sewage treatment and flood system: water inlet, basement supply, carbon and resin retention, demineralization method softening and ion exchange, sand, dual and mixed media filtration, wastewater sludge treatment;
3. screening, coal drying, starch filtration, pulp and plant fiber filtration, and beverage filtration are all involved in the processing of minerals, paper, and food;

AM4·series grating system

High-precision small-volume series grating ruler and reading head



Primary advantages

- AM4 series grating system is a compact grating for high dynamic precision system, single-field scanning application and low-latency subdivision processing, so that it has excellent dynamic performance.

- The AM4 series grating system is adapted to the M4 series ultra-thin stainless steel scale with a 40m grating pitch. The expansion coefficient is exactly the same as that of the substrate, and no separate temperature compensation is required.

- Corrosion-resistant, wear-resistant scale, high-strength scale, can effectively prevent the damage of the scale, making it still applicable in places with harsh environments. The scale surface is uncoated and when contaminated, the scale can be cleaned with solvents.

Model: RS-EV-AMT-T1S300-01
Warranty:
12 months
Place of Origin:
Guangdong, China
Brand Name:
rawsuns
Certification:
-
Car Model:
M1 and N1 models and M2 and N2 models
Size:
-
Name:
Rawsuns NEW reducer 350Nm 12000rpm parallel shaft gear box ratio 3.043
Maximum input torque:
350Nm
Maximum input speed:
12000r/min
Reduction ratio:
3.043
Lubricating oil volume:
0.8L
Weight:
22.5kg
Recommended application models:
M1 and N1 models, M2 and N2 models no more than 4.5 tons
Recommended application system:
pure electric system, extended-range hybrid power system
PAYMENT:
100% T/T in advance

Model: RS-EV-AMT-T1SF300-01
Warranty:
12 months
Place of Origin:
Guangdong, China
Brand Name:
rawsuns
Certification:
-
Car Model:
M1 and N1 models
Size:
-
Name:
Rawsuns GOOD ratio 9.04 12000rpm ev gearbox reducer for car
Maximum input torque:
350Nm
Maximum input speed:
12000r/min
Reduction ratio:
9.04
Lubricating oil volume:
1L
Weight:
33kg
Recommended application models:
M1 and N1 models
Recommended application system:
pure electric system, extended-range hybrid power system
PAYMENT:
100% T/T in advance

Warranty: 12 months
Place of Origin: Guangdong,China
Brand Name: rawsuns
Model Number: R1SF400
Type: Synchronous Motor
Frequency: 50/60Hz
Phase: Single-phase
Certification: ce
Protect Feature: Waterproof
AC Voltage: 115/120 V
Efficiency: IE 1
Maximum input torque(Nm): 320
Max input speed(r/min): 10000
Reduction ratio: 12.48
Lubricating oil quantity(L): 1.2
Weight(kg): 38
Product Name: ev conversion kit ev motor electric motor
Application: 3-5t Hiace model

Epoxy Coated Wire Mesh


Epoxy Coated Wire Mesh as hydraulic filter and air filter supporting layer to backup filter paper or non woven cloth .which used to filter out the system of particulate debris and rubber impurities, to ensure the cleanliness of the hydraulic system and Air Filtration System.


The epoxy coated wire mesh is primarily woven from average steel cable as well as covered with top notch epoxy powder with electrostatic spraying process to make this material immune to corrosion and also acid. Epoxy coated wire mesh is generally used as an assistance layer for purification, rather than galvanized cable mesh. It is ideal because of the stability and also economic situation of the structure. It is the almost all of the filter.

Basic material: low carbon steel/ordinary steel wire/aluminum wire/stainless steel wire, epoxy powder

Color: Dark gray and black epoxy coating is standard configuration, other colors can be customized, such as gray, white, blue, etc.

Epoxy Coated Wire Mesh-Features

Light weight

Epoxy coating makes it resistant to rust and rust

Stable internet structure, simple to pleated

High compatibility with different sorts of corrosive fluids

Resilient under heat and also high pressure

Easy to clean and also tidy

Epoxy Coated Wire Mesh-Application

Epoxy coated wire mesh is usually used in different filtration applications, as an assistance layer for hydraulic filters and also air filters, making certain good pleating results, giving maximum air flow and also peak filtering.

When epoxy coated wire mesh is utilized as epoxy coated filter cable mesh, as a hydraulic filter as well as air filter assistance layer to sustain filter paper or non-woven textile, used to strain bit pieces and also rubber impurities in the system to make certain the hydraulic system And also the cleansing of the air filter system.

Epoxy coated wire mesh can also be used as anti-insect thread for doors and windows. It is widely utilized to resist bugs such as flies, insects and bed insects in hotels, buildings, and homes.

For more information about the application of epoxy coated wire mesh,

The Twin U-slot section or twin-axial cable has a pair of insulated conductors where the conductors are run parallel with one another. This is commonly used in high-speed balanced-mode multiplexed transmission in large computer systems, in which the signals are carried by both conductors in a U-shaped configuration. This ensures reliable connection and provides greater noise immunity.

STC offers a variety of 1.5 Pitch connectors with different models and in various dimensions, with top or side entry configurations that might suit your specific needs. Top entry configuration consumes a minimum of 3.5mm x 5.6 mm mounting height and depth, respectively; while the side entry configuration consumes a minimum of 3.7 mm x 7.1 mm mounting height and depth, respectively.

This is offered in different models and in various dimensions, with top or side entry configurations which might suit your specific needs.

The top entry configuration consumes a minimum of 8 mm x 4.5 mm mounting height and width, respectively; while the side entry configuration consumes a minimum of 4.8 mm x 9.6 mm mounting height and width, respectively.

This is offered in different models and in various dimensions, with top or side entry configurations which might suit your specific needs.

Over-molded Shell Feature Designed for High Density, High-Speed Harness
Manufactured with higher infill housing, the 2.0mm connector is suitable for high-density and crowded applications, withstanding higher strain and mechanical stress.

Description
We manufacture and sell Gabion Box made from double twisted hexagonal gabion wire mesh.


Gabion Box sizes:

2m x 1m x 1m, 3m x 1m x 1m, 4m x 1m x 1m, 2m x 1m x 0.5m, 4m x 1m x 0.5m or as per your request.
Gabion Box wire surface treatment can be Zinc, Galfan or PVC coating as per ASTM A 641 & ASTM A 975.
Mesh type 8x10. The nominal mesh opening D = 3.25 in. (83 mm)
Mesh type 6x8. The nominal mesh opening D = 2.5 in. ( 64 mm)


Gabion Box applications:





Control and guide of water or flood
Flood bank or guiding bank
Preventing rock falling
Bridge protection
Strengthening structure of soil
Protection of seaside area
Surface TreatmentMesh SizeMesh Wire
mmSelvedge Wire
mmLacing Wire
mm
Heavy Hot dipped galvanized
or golfan galvanized
and PVC coating60802.0mm/3.0mm
2.2mm/3.2mm2.8mm/3.8mm
3.0mm/4.0mm2.8mm/2.0mm
2.0mm/3.0mm
801002.2mm/3.2mm
2.5mm/3.5mm
2.7mm/3.7mm3.0mm/4.0mm
3.2mm/4.2mm
3.4mm/4.4mm2.2mm/3.2mm
1001202.2mm/3.2mm
2.5mm/3.5mm
2.7mm/3.7mm3.0mm/4.0mm
3.2mm/4.2mm
3.4mm/4.4mm2.2mm/3.2mm
1201502.2mm/3.2mm
2.5mm/3.5mm
2.7mm/3.7mm3.0mm/4.0mm
3.2mm/4.2mm
3.4mm/4.4mm2.2mm/3.2mm

Configuration Characteristic:

Great Perviousness: keep the hillside and the seaside steady.
Great Pliability: No connection aperture and to be provided with tractility.
Great Anti-corrosion: The heavy galvanized surface and PVC/PE coated are able to against the corrosion strongly.
Resist the scour: to be suitable for seaside and slope defend project.
Holistic capability: The cages are perfect to others, it doesn't leave the aperture when constructed in the huge quantity.
Easy to Construct: Don't need water, concrete with moulding board, no need electric power also.
Application Better: easy to pack and load. It could be packed according to the design requests. Such as according to the shape of Hillside, Shore & bench, and Dike.
Economical: use local stone, not need any concrete.
Keep entironment: the stone should be filled with soil finally (contrived or natural).

Single Window Singlemode Tree couplers (1310nm or 1550nm) are bi-directional high-port count units for splitting or combining optical signals over 1310nm or 1550nm wavelength windows. They are fused bionics tapered couplers cascaded in series to achieve the desired port configuration. These couplers are used to branch 1(2) input fibers into N (3, 4, 8,...16 ..) out put fibers with minimum loss.

Product Information :

Suspension clamps are used to hang conductor or ground wire through insulators of link fitting to tower arms of substation structures The clamps are made of malleable iron or alummium alloy
The meaning of letter & arabic figures in the catalog are shown as follow
Xsuspension clamp Gfixed Sdolble clamp UU bolt Jstrength Halunimium Fcorona control K unde r axletype T envelopetype A with a socket clevis B with U clevis C hartg downtype
The suspension angleof suspension clampsis not less than 25??C the radius of curvature is not less than the dia of installed leaded by 8-10,and the percentage of the grip on different kinds of leads to calculating capabilltyof snap show in following table

Combining 12~144 fiber trunk cable with 12F MPO/MTP and generic connectors, Gigalight;trunk cable assemblies contain MPO to MPO and MPO hybrid types. Plug and Play Reels, Pulling eye are designed to be quickly pulled and connected to Plug and Play Modules and Adapter Plates. Customized configurable to precise application requirements, these reels or pulling eye are efficiently put high-performance, high-density fiber connections exactly where you need them.

Feature:
Two single-fiber as basic unit , flat twin configuration;
Single-cable with independent strength member;
Tight buffer(900um or 600um).



Application:
Indoor riser level and plenum level cabling;
Fiber jumper or pigtail;
Indoor riser level and plenum level cabling;
Interconnections between instruments and communication Equipment

Clearance:
Blade barbed wire 550USD/T 30ts
Hexagonal net 10USD/COIL(4500coils)
Rhombus 15USD/COIL(3700coils)
Black wire 500USD/T(450ts)

Valid for 15 days