Find Verified Electric Power Generators Suppliers, Manufacturers and Wholesalers

This machine is produced in wintime machinery co., ltd. It can test a variety of heavy duty springs such as locomotive springs¡¡écar springs or leaf springs. This testing machine mainly use computer and software to control the whole system, which can make the accuracy more precise. The hydraulic cylinder is imported from germany, which is high flow, good circularity and high availability. This machine can be used to test the heavy duty springs of haulage motor. This machine can adopt the electro-hydraulic servo testing system to operate. The all parts of equipment can be maintained and repaired. The main functions of this machine is as follows, it can use fixed deformation or fixed load. Measurement system can be automatic zero, automatic calibration. Computer real-time display test amplitude, test frequency, the number of fatigue. The load capacity is up to 500kn, and the test space is about 600mm(wide)* 1700mm(length), which can be adjust up and down. The max.Test amplitude is ¡¨¤40mm, and the frequency is about 0.1hz to 4hz. The maximum power should be 380 v ac, 110 kw. This machine can match different kinds of heavy duty springs such as locomotive springs¡¡écar springs or leaf springs.

DMF Mass Flowmeter is mainly used in food industry (dairy product, liquor, drink, syrup, chocolate, cooking oil), chemical industry (olefin, light olefin, naphtha and diesel oil, arene, LPG), fine chemical industry (salt chemical industry, resin industry, chemical additives), pharmaceuticals industry (material producing, testing), logistics industry (all kinds of chemical material, oil)

1. Main Technology Parameters
/cm3 Repeatability: 0.10%
Signal output: 4~20mA load resistor £¼ 500¦¸ (real-time flow rate or density )
0~10 KHz real-time flow pulse signal
485 communication signal
Sensor explosion-proof grade: Exib(ib)IIBT2~T5
Transmitter explosion-proof grade: Exib(ib)ibI BT5

Flow Range
For small and middle style

Item No.
Caliber£¨mm£© Measurement Range (kg/h) Operating
Pressure£¨Mpa£© Connection£¨mm£©
Welded
DMF-1-1-A 3 4-40 32 ¦µ6¡Á1.5
DMF-1-1-B 6 10-100 25 ¦µ10¡Á2
DMF-1-2-A 7 20-200 20 ¦µ10¡Á1.5
DMF-1-2-B 10 40-400 25 ¦µ14¡Á2
DMF-1-3-A 12 50-500 4 ¦µ18¡Á3
12 25 ¦µ20¡Á4
DMF-1-3-B 14 100-1000 4 ¦µ18¡Á2
14 25 ¦µ20¡Á3
DMF-1-4 16 300-3000 4 ¦µ18¡Á2
16 25 ¦µ20¡Á4


Individual in polybags, inner plastic boxes, out plywood cartons(wood cartons),any special required packings can be specified as well(customization).

Ht-1000b supersonic flowmeter series is manufactured by modern technology, which is the first choice for the industries, the measurement principle of which is based on the difference of the flow speed. They're mainly used to measure the volume flow of the conductive fluid and slurry in a closed tube. With some characters such as good m

Language menu
Chinese and english are available for reading.
Energy source
Ni-mh, rechargeable, large capacity, which could easily, ensured the flowmeter work more than 20 hours.
Printer inside
Print the data real-time, as well as the results according to customer comments.
Data recorder inside
This could load all the results into the computer and internet.



Individual in polybags, inner plastic boxes, out plywood cartons(wood cartons), any special required packings can be specified as well(customization).

Main features
A. Single chip technology, powerful function, high accuracy.
B. Lithium battery for energy source, as long as two years or longer.
C. Instant flow and total flow are easily showed on the screen, and all the data will be remembered for more than ten years though the product powered off.
D. Simple structure, easy installation, operation and maintenance. And password protection.
E. Data is amended automatically and high accuracy.
F. Clear in reading, simple operation and maintenance.
G. Explosion-proof.

Main technology parameters
Accuracy: ¡¾0.2% ¡¾0.5% ¡¾1.0%
Caliber: dn15~dn500mm
Pressure: 1.6~6.3mpa. ¡ã10mpa
Measurement range: 0.4~4000m©ø/h
Connection type: thread connection (dn15~dn40mm) flange connection(dn15~dn500mm)
Energy source: 1) a lithium battery inside- no output;
2) 24vdc outside- 4~20ma output
Explosion-proof grade: exd¥±bt5


Individual in polybags, inner plastic boxes, out plywood cartons(wood cartons), any special required packings can be specified as well(customization).

Measure normal parameter of power line:

Vrms, irms, frequency

Active power, reactive power, apparent power

Phase angle between voltage and current

Power factor

Calibrate single phase meter;

Measure harmonic of voltage and current;

Measure waveform of voltage and current;

Measure current transformer¡¡¥s ratio (option);

Energy accumulation test;

Built-in clock, record testing time exactly;

Store, check and transmit the measured data;

Connected to pc, reading recorded data and real-time measured data by pc;

Alarm when the tested voltage and current over the testing range;

Connected to portable printer (option).

1.Starting test and creeping test

2.Measuring the different constant meters synchronously.

3.With the protect function of overload, short voltage circuit and open current circuit.

4.The testing software with friendly windows 2000 and xp interface, include functional module of all kinds of modern energy meter needed, to reality error test, harmonic test, demand test, influence test.

5.The stored testing data can be transferred to multi-format for other program using

Frequency 50hz ¡¨¤2hz

Outside magnetic field intensity: ¡¨¹0.025mt

Warm-up: the time of warm-up: ¡y30 minutes

Using condition:

Environment temperature: 5¡æ¡-40¡æ

Relative humidity 25%¡«85%

Test current:

0.05a¡«120a

Current range 1a, 10a, 100a

Imax=120a

Test voltage

50v¡-480v

Voltage range: 50v, 100v, 200v, 400v

Umax=480v

Accuracy:

Current:

¡¨¤0.05%rg 0.125¡«120a

Voltage:

¡¨¤0.05%rg 40v¡«480v

Power:

Active power ¡¨¤0.05% (50v¡«480v, 0.2a¡«120a, cosØ¡y0.5)

Reactive power ¡¨¤0.1% (50v¡«480v, 0.2a¡«120a)

Apparent power ¡¨¤0.1% (50v¡«480v, 0.2a¡«120a)

Power factor

Measurement range: 0¡«¡¨¤1

Accuracy: ¡¨¤0.05%rg (cosØ¡y0.5)

Phase:

Measurement range: 0¡ã¡«360¡ã

Accuracy: 0.05¡ã(50hz)

Frequency:

0.03%rd (45hz¡«65hz)

Pulse output:

Ttl level

Load ¡ê¾2kw

High frequency output port: fh

Low frequency output port: fl

Affection of temperature: (5¡æ¡«40¡æ)

Voltage, current and frequency: ¡¨¹¡¨¤15ppm/¡æ

Power: ¡¨¹¡¨¤30ppm/¡æ

Communication port:

Rs232

Rs485

Power supply:

Voltage: ac220v¡¨¤22v

Frequency: 50hz¡¨¤2hz

Power: 40va

Dimension:

432mm¡¨¢131mm¡¨¢308mm

Weight:

15kg

Description
Te261 visual fault locator is visible red laser source for finding breaks and tight bends in optical fibers.
Te261 generates red laser and the visible red laser that escaping from optical fibers makes testing and finding breaks in lans, verifying continuity, checking the validity of patch cables or looking for cracked fiber in splice cases, bad connectors, and tight bends in fiber cable.




Paper carton, 0.5kg

Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto detect cleaved end face fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch tft color lcd monitor with clear digital image display
Usb & vga interface
Software upgrade via usb interface


Paper carton, weight is 12kg

Core to core alignment by pas technology
(pas:profile alignment system)
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto check quality of cleaved end face
5.7 inch tft color lcd monitor with clear digital image display
Usb & vga interface
Software upgrade via usb interface


Paper carton, weight is 12kg

Features:
Small, powerful and portable
Battery powered
3.5 inch tft-lcd can meet the needs of high luminance environment and night.
Be with simple and friendly graphical user interface.
Touch screen panel and keyboard button can meet different operator's habits.
Hotkey for rapid testing, and just press the hotkey you can obtain the required operational test results.
Provides three power saving modes, close the lcd screen, equipment sleep and power-down, continuous working time up to 8 hours
1310/1550 dual-wavelength testing
Visible light source, facilitate to inspect fiber break
Complete pc analysis software
Easy to operate

Application:
Determine fiber optic cable or fiber optic's failure point, connection point, breakpoint position.
Describe fiber optic cable or fiber's loss distribution curve, measure cable, fiber's length and the loss, attenuation coefficient between two points
Measure fiber optic cable, optical fiber connector's insertion loss
Measure fiber optic cable, optical fiber's reflection loss
Be widely used in metropolitan, wan, catv and other communication systems for fiber optic cable or fiber installation, troubleshoot, transformation and maintenance.


Paper carton, weight is 5 kg

Battery power display

Application:
1. Maintenance telecom
2. Maintenance catv
3. Test lab of fiber optic
4. Optical fiber sensors


Paper carton

Features:

1. Check the error of active and reactive of watt-hour meter at the same time, and meanwhile check the error of main and secondary meter in the same circuit.

2. Display the electrical constants such as: voltage, current, power, power factor, phase and frequency and etc.

3. Measure ct ratio, wave form display.

4. Measure 2-51 voltage and current harmonics.

5. Judge wrong wiring.

6. Measure the baud rate for multi-function energy meter and meter number reading.

¦ct secondary loading function.

8. Automatically correct the clamp error.

Core to core alignment by pas technology
(pas:profile alignment system)
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto check quality of cleaved end face
5.7 inch tft color lcd monitor with clear digital image display
Usb & vga interface
Software upgrade via usb interface


Carton size: 53*40*36 cm, vulome weight: 12kg

Optional accessories
Cable port: two size of cable port is available: diameter: 50mm, diameter:100mm.
Double door
Pass room: provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
Floor reinforcement: can be fixed if heavy specimen placed in the chamber for test.
Carry-in inclined platform: provided below the door to facilitate moving of specimens in and out through the door.
normal running, a malfunction running or stand by occurs.
Water purifier

DecFuse DEC36 Fusion Splicer
-Equal to Fujikura 60s, Sumitomo 39
-CE
-8s splicing
-Fiber cleaver included
-Type:Optical Fiber Fusion Splicing Machine

Features
-High-resolution true color 5.7 inch LCD display
-advanced core to core fiber profile alignment system(PAS)
-Real time calibrating system ,parameter neednt be adjusted
-X/Y axes were displayed meanwhile, Magnification up to 304 times
-8 seconds splicing time, 30 seconds Heat-Shrinking
-Battery capacity was display in real time, precisely
-Built-in high capacity battery, support 220 times splicing and heating, to meet one days work
-Long Electrode Lifetime, up to 4000 times
-The new wind-cover design, enhance the ability to prevent the dust & wind, Max. wind velocity of 15m/s
-Three Splicing modes: auto, half-auto, manual
-Built-in super high-brightness LED supply convenience for night work
-Auto calculate splicing loss
-Small bulk and light weight, only 2.8kg include battery
-4000 results Storage
-USB data interface &VGA
-One button operation to finish results download or software update
-Close shield splice automatically, Close heater lid heat automatically
-One year Warranty


Why Purchase from us
1. Equal to Fujikura FSM-60s, Sumitomo Type-39
2. First Manufacture in China
3. Fastest splicing (8 second) in the world
4. One year warranty
5. 3 days delivery + low shipping cost by air

Standard Export Carton. G.W/N.W: 8.0/7.0kg, L x W x H :465mmx350mmx360mm

-equal to fujikura 60s, sumitomo 39
-ce
-8s splicing
-fiber cleaver included
-type:optical fiber fusion splicing machine

Features
-high-resolution true color 5.7 inch lcd display
-advanced core to core fiber profile alignment system(pas)
-real time calibrating system , parameter neednt be adjusted
-x/y axes were displayed meanwhile, magnification up to 304 times
-8 seconds splicing time, 30 seconds heat-shrinking
-battery capacity was display in real time, precisely
-built-in high capacity battery, support 220 times splicing and heating, to meet one days work
-long electrode lifetime, up to 4000 times
-the new wind-cover design, enhance the ability to prevent the dust & wind, max. Wind velocity of 15m/s
-three splicing modes: auto, half-auto, manual
-built-in super high-brightness led supply convenience for night work
-auto calculate splicing loss
-small bulk and light weight, only 2.8kg include battery
-4000 results storage
-usb data interface &vga
-one button operation to finish results download or software update
-close shield splice automatically, close heater lid heat automatically
-one year warranty


Why purchase from us
1. Equal to fujikura fsm-60s, sumitomo type-39
2. First manufacture in china
3. Fastest splicing (8 second) in the world
4. One year warranty
5. 3 days delivery + low shipping cost by air

Standard export carton. G.W/n.W: 8.0/7.0kg, l x w x h :465mmx350mmx360mm

DecFuse DEC36 fibre splicer
-Equal to Fujikura 60s, Sumitomo 39
-CE
-8s splicing
-Fiber cleaver included
-Type:Optical Fiber Fusion Splicing Machine

Features
-High-resolution true color 5.7 inch LCD display
-advanced core to core fiber profile alignment system(PAS)
-Real time calibrating system ,parameter neednt be adjusted
-X/Y axes were displayed meanwhile, Magnification up to 304 times
-8 seconds splicing time, 30 seconds Heat-Shrinking
-Battery capacity was display in real time, precisely
-Built-in high capacity battery, support 220 times splicing and heating, to meet one days work
-Long Electrode Lifetime, up to 4000 times
-The new wind-cover design, enhance the ability to prevent the dust & wind, Max. wind velocity of 15m/s
-Three Splicing modes: auto, half-auto, manual
-Built-in super high-brightness LED supply convenience for night work
-Auto calculate splicing loss
-Small bulk and light weight, only 2.8kg include battery
-4000 results Storage
-USB data interface &VGA
-One button operation to finish results download or software update
-Close shield splice automatically, Close heater lid heat automatically
-One year Warranty


Why Purchase from us
1. Equal to Fujikura FSM-60s, Sumitomo Type-39
2. First Manufacture in China
3. Fastest splicing (8 second) in the world
4. One year warranty
5. 3 days delivery + low shipping cost by air

Standard Export Carton. G.W/N.W: 8.0/7.0kg, L x W x H :465mmx350mmx360mm

Decfuse dec36 fiber optic splice
-equal to fujikura 60s, sumitomo 39
-ce
-8s splicing
-fiber cleaver included
-type:optical fiber fusion splicing machine

Features
-high-resolution true color 5.7 inch lcd display
-advanced core to core fiber profile alignment system(pas)
-real time calibrating system , parameter neednt be adjusted
-x/y axes were displayed meanwhile, magnification up to 304 times
-8 seconds splicing time, 30 seconds heat-shrinking
-battery capacity was display in real time, precisely
-built-in high capacity battery, support 220 times splicing and heating, to meet one days work
-long electrode lifetime, up to 4000 times
-the new wind-cover design, enhance the ability to prevent the dust & wind, max. Wind velocity of 15m/s
-three splicing modes: auto, half-auto, manual
-built-in super high-brightness led supply convenience for night work
-auto calculate splicing loss
-small bulk and light weight, only 2.8kg include battery
-4000 results storage
-usb data interface &vga
-one button operation to finish results download or software update
-close shield splice automatically, close heater lid heat automatically
-one year warranty


Why purchase from us
1. Equal to fujikura fsm-60s, sumitomo type-39
2. First manufacture in china
3. Fastest splicing (8 second) in the world
4. One year warranty
5. 3 days delivery + low shipping cost by air

Standard export carton. G.W/n.W: 8.0/7.0kg, l x w x h :465mmx350mmx360mm

Decfuse dec36 fiber splicers
-equal to fujikura 60s, sumitomo 39
-ce
-8s splicing
-fiber cleaver included
-type:optical fiber fusion splicing machine

Features
-high-resolution true color 5.7 inch lcd display
-advanced core to core fiber profile alignment system(pas)
-real time calibrating system , parameter neednt be adjusted
-x/y axes were displayed meanwhile, magnification up to 304 times
-8 seconds splicing time, 30 seconds heat-shrinking
-battery capacity was display in real time, precisely
-built-in high capacity battery, support 220 times splicing and heating, to meet one days work
-long electrode lifetime, up to 4000 times
-the new wind-cover design, enhance the ability to prevent the dust & wind, max. Wind velocity of 15m/s
-three splicing modes: auto, half-auto, manual
-built-in super high-brightness led supply convenience for night work
-auto calculate splicing loss
-small bulk and light weight, only 2.8kg include battery
-4000 results storage
-usb data interface &vga
-one button operation to finish results download or software update
-close shield splice automatically, close heater lid heat automatically
-one year warranty


Why purchase from us
1. Equal to fujikura fsm-60s, sumitomo type-39
2. First manufacture in china
3. Fastest splicing (8 second) in the world
4. One year warranty
5. 3 days delivery + low shipping cost by air

Standard export carton. G.W/n.W: 8.0/7.0kg, l x w x h :465mmx350mmx360mm