Find Verified Electric Machines Equipments Suppliers, Manufacturers and Wholesalers

Product features
(1) with clutch to artificial put rope function;
(2) the brake and reliable;
(3) series machine;
(4) the whole steel less teeth difference star wheel reduction mechanism adapted to the weight load homework;
(5) elaborate product appearance design, make the products more beautiful and easy to install.

QJ-400 wire recycling machine
This machine with PCL control system,can recycling 99%copper from scrap copper wires/cables,the wire or cables' diameter should be below 20mm.



No packing
Mea.: L2700xW1900xH2300
Voltage:380V
Power: 16KW
Weight:1.2t output:150~200kg/h.

Qj-002 wire stripper machine
Voltage:110v/230v
Power: 1.5kw
Weight: 69kg
Mea.: l540f¯w410f¯h500 wire range:2mm-40mm
Daily capacity: 200kg~1000kg.

918-ka
Voltage:220v/380v
Power:2.2kw
Weight:80kg
Mea.:l570xw570xh840
Wire range:1-35mm
Daily output:400-1000kg.

918-600 integral type separator
This machine is specializing for the auto wires, communication wires and so on, and for the wiref+s not fit for stripper. All parts are design as integrity, it's convenience for ur using.
Size: w3500xw1900xh270
Voltage:380v
Weight:3t
Power:36kw
Daily capacity:3-4t.

918-kw
Voltage:220v/380v
Power:2.2kw
Weight:165kg
Mea.:l700xw400xh650
Wire range:5-60mm
Daily output:400-2000kg.

The machine is used for drawing electrical aluminum rod from 9.5mm to 1.8-4.5mm, which wound by the dual take up device or coiler.

Uminum alloy. Aluminum cable steel reinforcing wires to produce the following power cables sector shaped conductors round compacted, single core presiralled.
Breel is arranged quartering around the cages. The centralized side loading system can increase efficiency much more.The equipment has high rigidity, high-powerd, and high speed.

In large-scale photovoltaic power stations, there are usually multiple inverters that generate a large amount of data, such as output voltage, current, power, frequency, and operating status (normal, fault, standby, etc.). This data needs to be accurately and timely collected and transmitted to the monitoring system so that staff can monitor the operating status of the inverters in real-time, detect faults promptly, and perform maintenance to ensure the efficient operation of the photovoltaic power station. Traditional RS485 communication networks mostly operate in a one-master-multiple-slave mode. However, in some complex application scenarios, two master devices need to simultaneously collect data from and control the inverters. For example, in a large-scale distributed photovoltaic power station, there may be both a local monitoring center and a remote monitoring center. The local monitoring center needs to obtain real-time inverter data for on-site operation and maintenance management, while the remote monitoring center needs to aggregate and analyze the operational data of the entire power station for remote dispatching. In such cases, the two-master-one-slave RS485 bus splitter emerges as a solution.

Splicing Type SM, MM, DS, NZDS
Splicing Loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS)
Return Loss >60dB
Splicing Mode Manual, Half Auto, Auto
Fiber Alignment Core to Core Alignment by PAS technology
Applicable Fiber Cable indoor and 0.25mm,0.9mm fiber, SOC connector(option)
Splicing Time 9s
Heat Time 30s Auto Heat
Cleaved Length 8-16mm
Fiber Image/ Magnification 300/150 times
View Display 4.3 inch digital high-quality LCD screen
Tension Test Standard 2N (option)
Heat Shrinkable Sleeve 60mm, 40mm and serials heat Shrinkable Sleeve
Battery Capacity 300 cycles splicing and heating, 3 hours charging time
( splicing and charging at same time)"
Battery Life Cycling charge 300-500 times, easy to replace battery
Electrodes Life 3000 splicing, easy to replace electrodes
Power Source 20W
Interface USB Convenient data download and software update
Construction Lighting Built in high brightness, wide range of lights, easy to operate at night
Power supply Built in lithium battery 5200mAh 11.1V; external adapter,
input: AC100-240V, output: DC13.5V/4.5A"
Operating Condition 0-5000m above sea level, Temperature: -10-60,
Humidity 0 95%RH (No dew)"
Weight 1.7 KG (including battery)
Dimension (LxWxH) 150mm(L) 135mm(W) 142mm(H)

Remove broken taps without damage to the workpiece.

PDU PRODUCT FEATURES
·Output AC 220V 16 channels 16A
·Provide RS485 bus
·Environmental monitoring: temperature and humidity, and threshold alarm
·The main circuit and branch circuits can be set for upper limit measurement and over-limit alarm
·Industrial-grade OLED display, current, voltage, power, energy, and switching status of the main circuit and branches
·Internal real-time clock, power-off time retention
·The whole machine has high reliability and strong anti-interference ability.
·Use high pressure resistant and flame retardant materials
·180-265V wide voltage input, providing lightning and surge protection
·Support local viewing of voltage, total current, and alarm status;
·Support monitoring and viewing the voltage, current, and alarm status of each jack;
·Supports controlling the on/off of each output jack;
·Support customization of socket standards in most countries in the world;
·Output status indication
·Operating temperature -20-55c
·Operating humidity 10% 90% (non-condensing state)
·Working power supply: 85V ~ 264AC/DC;
·Accuracy level: Level 1;
·Measuring range: 0.5A~63A, 100~300V AC/DC;
·Current resolution: 0.01A
·Alarm function: current overcurrent alarm, the overcurrent alarm value can be set through the menu or communication
·The communication adopts MODBUS RTU protocol. The data format of one frame is: 1 start bit + 8 data bits + 1 stop bit. The baud rate is 9600 bit/S.
·OLED indicates the current status of each socket and equipment operation indication
·Digital tube displays time and power parameter values
·PDU total current 32A, maximum 16A per channel