pump impellers are interchangeable with AH/HH/LM pump impellers, The Impeller is one of the most important parts for slurry pump. Centrifugal slurry pumps need impeller to produce the centrifugal force which transfer the . The centrifugal force is produced by the impeller which rotates to a certain speed, As main rotating component which normally has vanes to impart the centrifugal force to the liquid, Usually, slurry pump impellers have a plain or a Francis type vane.
11 inch Impeller 19121-70-30 is used for 6x5x11 Mission Magnum Centrifugal Sand Pumps.
provides 19121-xx-30 impellers for Mission Magnum centrifugal pump 6x5x14:
19121-70-30 Impeller 6 x 5 11 inch
19121-80-30 Impeller 6 x 5 12 inch
19121-90-30 Impeller 6 x 5 13 inch
19121-A0-30 Impeller 6 x 5 14 inch
Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings.
Part size cast into the impeller. This makes part identification easier.
Impeller gasket in included with impeller
All impellers are dynamically balanced
Offered Hard iron and other materials upon request
Application: Warehouse, outdoor Color Temperature(CCT): warm white, pure white, cold white Lamp Body Material: PC Base Type: E40/E39 CRI (Ra>): 80 Input Voltage(V): AC 85-265V Lamp Luminous Efficiency(lm/w): 125 Lamp Luminous Flux(lm): 25000 Warranty(Year): 3-Year Working Lifetime(Hour): 50000 Working Temperature(): -25 - 45 Color Rendering Index(Ra): 80 Type: Corn Lights Power Supply: AC Light Source: LED Support Dimmer: NO Lighting solutions service: Project Installation Lifespan (hours): 50000 Item Type: Bulb Lights Item name: e39 e40 led corn lamp Product Name: led light corn Other Name: cornlight Warranty: 3 Years Base: E40/E39 Material: PC Cover Emitting degree: 360 degree
Name: Wireless portable scale
Weighing: Axle weighing
Pad: Aluminum alloy materials
Indicator: Touch screen indicator
One set product: Including two weighing pad, two ramps each pad, a touch screen indicator
Installation: Wall mounted / Table Stand / Floor Stand
ON/OFF switch : infrared sensor
Dispensing volume : 0.8 1.0ml
IR sensing distance : 8 12cm
Capacity : 850ml
Material : High quality 304 Stainless Steel
Touch free, Germ away
Reduces transmission of bacteria or microorganisms without touching. Provide a hygiene and convenient hand-washing / hand sanitizing solution during the pandemic.
Expertly crafted of stainless steel
Made of high quality 304 stainless steel, the physical and chemical properties of metals are unmatched by plastics, as well as the texture level. An inspired combination of design, style and practicality. The minimalist design makes the dispenser more classic and attractive, suitable for installation in almost any place.
Easy to refill
Work with all brand liquid soap, hand sanitiser, gel. Save your money from soap refills.
Wide refill opening, Makes it easy to refill your soap without messy drips. One-off refills can be replaced in 3 seconds, very fast.
Long battery life
Powered by 4 pieces of C batteries. Support 150,000 times dispense, works for more than 24 months without replace batteries.
batteries not included, it s also workable with AC plug
ADA Compliant
Compliant in force and one-handed operation, this dispenser conforms to the Americans with Disabilities Act (ADA) Standards. These standards state that places of public accommodation must be accessible to people with disabilities.
Versatile Use
Perfect for use in restrooms, kitchens and lunchrooms, this high, 1000ml capacity dispenser helps to reduce maintenance. Its ideal for both commercial and public entities, including offices, hospitals, food service facilities, manufacturing plants, schools and much more.
Maintenance Easily
Red light flash reminds us to replace the batteries
The transparent reservoir visually indicates when replenishment is necessary while quick-removing top allows for efficient refilling.
Safe Design
Lockable. There s a protective device, its not only protect the liquid, but also guarantee our hands s safety and health.
Description
Wall Mounted Liquid Soap & Hand Sanitizer Dispenser
The dispenser body is made of fresh and durable engineer ABS plastic construction that is resistant to chemicals, heat and impact. It s also ADA compliant in force and one-handed operation, ensuring that it s accessible to people with disabilities.
Large Capacity.
The dispenser has an 1000 ml capacity and dispenses up to 1000 times per fill, making it economical to use.Ideal for use in hospitals, offices, restaurants, healthcare facilities, schools and more.
Minimalist Design.
The compact and minimailist design make it classic and durable, it is suitable for high-traffic areas such as restrooms, break rooms, kitchens and lunch rooms in both commercial and public entities. Each one comes with included installation accessoris in the package, allowing you to easily mount it onto any wall. Of course, you can also use adhesive tape to mount on the wall directly, which is more convenient.
Easy Maintenance.
This Liquid Soap & Hand Sanitizer Dispenser is equipped with a clear, site window so you can easily monitor the level and refill when needed, while a push-style lever makes it quick and simple to dispense. Additionally, it boasts a nifty, secure lock to help prevent damage caused by tampering and/or vandalism.
Suitable for a Wide Range of Liquid.
From study and clients s feedback, the flexible nozzle design is workable with many liquids like alchol based hand sanitiser, hand disinfectant, hand soap and hand cream.
Chemical name: N,N-bis(2,2,6,6-tetramethyl-4-piperidyl)-N,N diformylhexamethylenediamine
CAS No 124172-53-8
Molecular formula:Â C26H50N4O2
Molecular weight: 450
Molecular structure
Specification
Appearance: White to off white crystalline powder
Purity, %: 99 min.
Loss on drying,%: 0.5 max.
Melting point: 155-158 degree
Application
LIGHT STABILIZER LS-4050 is a low molecular weight hindered amine light stabilizer (HALS) for applications demanding particularly high light stability. It provides excellent light stability for thick sections but can also be used for articles with a high surface area such as films and tapes. It is suitable for the stabilization of polyolefins, particularly in thick-walled PP molding and PP fibers, as well as ABS, PS, PA and polyesters.It is highly compatible with pigments.
Technical parameters: Power supply: Built-in solar panel and lithium battery
Display: LED
Coding: rolling code
Frequency: 433.92MHz
Receiving distance: 100m
Protection level: IP44
Dimensions: 222mmx120mmx55mm
Product name: 20w dual port QC3.0 fast charge + PD
Input: 100~240V50/60Hz0.35A
Type-c output: 5V 3A/9V 2.23A /12V 1.67A
USB-A output: 5V-3A9V-2A12V-1.5A
Support system: Android, Apple, tablet, etc.
Material: high quality ABS+PC
Colors: White, Black
Total power: 20W
European standard size: 86*50*48mm
Product net weight: 50g
Color box size: 175*91*33mm
Product gross weight: 65g
Packing quantity: 60PCS
Gross weight of the whole box: 5.2KG
Carton size: 32*27*20.2cm
Product Certification: CE
