Find Verified Copper Pipe Scrap Suppliers, Manufacturers and Wholesalers

Copper pipe used for: Air conditioner and refrigerator, water tube service and distribution, fire protection, solar, fuel/fuel oil, natural gas, liquefied petroleum (LP) gas, HVAC, snow melting, drain, waste, vent piping, for re-drawing use

Seamless phosphorus deoxidized copper tube

Coil weight: 300kg.

"Description

INCI Name : Copper Pyrithione
CAS NO:14915-37-8
Product Description

Chemical name:Bis[1-hydroxyl-2(1H)-pyridine-thionato] copper;copper-2-pyridine thion1-Oxide
Physical and Chemical Properties Appearance:Green Powder
Analytical Profile Appearance Identity
Odor
"

Copper Pressure Fitting from 1/2" to 10"

Widely used in air-conditioning, refrigeration and thermo-controlling area.

Used for high-technical products

Hench custom design top villa luxury copper entry door any custom size available

Our copper door specification :

1. Our copper door jamb 160mm x 80mm
2. Our copper door sheet 120mm x 60mm
3. our copper door use 2 layer front glass 10mm tempered glass, 12mm gauge copper bar, back 10mm tempered art glass. we use 2 layer glasses just consider easy cleaning and can protect iron work always looks new.

4. Our copper door hinges diameter 30mm, our door seal strip adopt same material used on car seal strip. the seal effcifence is very good.

5. our copper door price included the handles and lock, it can save your cost to buy lock and trouble to install the lock by yourself.

6. Our copper door primer paint and surface pant all we use car paint, it can have more long time not rust and looks more beautifuly than normal door paint.

7.Our copper door the door jamb and door sheet we filled good quality insulation thermal fire material ,this kind of material the weight is very lighter and it can undertake on 1000 degree high temperature. if you want ,we will send you this thermal insulation performance let your checking.

8. We support neutral payment methold pay pal ,let you don't have worried cooperate with us.

9. About shipping cost, your just need sending inquiry and tell us your detail address (including zip code). we can
direct shipping to your address. I can promise , you buy from our company will be cheaper than you by from your local or any other company. because our quality and design are unique.

10. If you are interesting, you can inquiry us.

High end Purple Gold Copper beer making machine,customized cooper beer fermentation tank ,Malt beer tank making machine .
Beer is called "liquid bread " with Low alcohol liquor,welcome cooperate!

Wrought iron gates, drive way door ,copper doors
Wrought iron gate specifications
Shanghai manufacturer wrought iron gate designs,copper iron gate designs

1. Good installation guide
2. Rust-proof:hot galvanized
3. Good shipping service
4. Customized design,color,size,packing,logo etc.
Wrought iron gate design

Product Introduction
AFR-200 is thin-wall small cross-section hook-up wire with PTFE film wrapped insulation, rated for 250V AC continuous operation and long-term working temperature up to 200C.
Constructed with stranded high-purity fine copper conductor complying with GJB 1640 standard, this wire is designed for electrical & electronic equipment whose ambient or component temperature stays within 200C, as well as circuits prone to overload current and heavy mechanical compression. It is the ideal internal wiring for compact, weight-sensitive instruments and electronic devices thanks to outstanding flexibility, repeated bending resistance and anti-vibration property. Its PTFE insulation can withstand high soldering iron heat without shrinkage or melting during welding assembly.

Core Basic Electrical Spec
1.Rated Voltage: 250V AC
2.Operating Temperature Range: -60 ~ +200
3.Insulation Resistance: 1.5-10 Mm at 20
4.Available Colors: Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Transparent or custom specified hues & stripe colors
Key Product Features
High Dielectric Strength & Arc Resistance: Premium PTFE insulation delivers excellent breakdown voltage and superior anti-arc performance.
Superior Weather & Aging Resistance: Zero water absorption, excellent UV & oxygen stability, long service life under harsh outdoor & high-temperature environments.
High Flexibility & Mechanical Durability: Fine stranded copper construction for superb flex & anti-fatigue performance, perfect for tight-space routing inside precision equipment.

Typical Application Scope
1.Internal wiring for precision instruments, analytical meters, laboratory testing equipment
2.High-temperature control & internal wiring of industrial electrical appliances, aerospace small electronic modules
3.Compact electronic devices, sensor internal leads, wiring under overload & high mechanical compression working conditions

Nitrile gloves from China
10 millions boxes provide for one month.
Payment terms : %50 advance %50 TT
Certificates : CE , FDA 510 K
If you are interest please contact with us.

The LDC-02 compact processor has been designed to give maximum production with the minimum of fuss with production speeds of up to 22000 forms an hour. Problems normally associated with paper processing like varying throw length, inconsistent registration and gearing( giving a washboard effect to the pack) are problems of the past when packs are produced on the LDC-02.

Has high conductivity and excellent performance.

The L470-2C is able to print two colors at the same time on to pre-machined packs of continuous forms.The L470-2C is a fully variable size press capable of printing up to a 13 1/2" image in 1/6" or 1/4" increments without the need for additional cylinders or cassettes.
Specification:
Maximum web width: 18-1/2" (470mm)
Maximum print length: 6"-13.5"
Paper weight: 35-170 g/m2
Speed: 6000 fph Max
Inking system: Two form both heads
Dimension:
Height: 1840mm
Width: 1030mm
Length: 1340mm
Weight: 750kg approx.

Processed from OFC copper tube, and have the high conductivity and excellent performance.

Used by automotive manufacturers, electrical equipment manufacturers, mints (for coinage)

The LPY-04 Step & Repeat Numbering Machine is a robust machine designed with changing customer requirements in mind. with paper out detection on all stations, a variable speed conveyor delivery, adjustable crimp depth/position while running and a operating speed of up to 600 fpm, the LPY-04 is a machine for more demanding forms manufacturer.

Safety Clamps are tools for handling flush joint pipe and drill collar. there are two kinds of model of safety clamps. Model WA-C Safety clamps can accommodate pipe from 31/2 to 155/8inch(88.9-396.9mm)O.D Model WA-T Safety Clamps can accommodate pipe from 11/8 to 41/2(28.6-114.3mm)O.D

NFT hydroponic system is pipeline cultivation, this is a form of soilless culture, mainly based on hydroponic leaf vegetables. The vegetables produced in this NFT hydroponic system are clean, pollution-free, and can be picked and eaten directly. The pipeline cultivation includes table type NFT hydroponic system, vertical hydroponic system, zipper pipeline hydroponic system, widely used in hydroponic supplies for greenhouse vegetable production.

JY supplies commercial NFT hydroponic systems for greenhouse growers, vertical farms, agricultural projects and wholesale buyers. As part of our nft hydroponic system for sale, the NFT system is designed for efficient leafy vegetable and herb production, using a thin, continuous nutrient film to deliver water, oxygen and nutrients directly to plant roots.

Our NFT product range includes hydroponic grow tables, PVC hydroponic pipes, hydroponic zipper pipe, vertical hydroponic system options and hydroponic tower designs. Buyers can choose a standard system or request a customized NFT layout based on greenhouse size, crop type, planting density and project budget.

TYPES OF HYDROPONIC NFT SUPPLIES FOR SALE
Hydroponic Table
The fixed table type NFT hydroponic system is widely used to plant lettuce, herbs, leaf vegetables, strawberries. Although the rack is fixed but the gullies can be take out from rack easily, very convenience for your management.

Hydroponic Pipe
Hydroponic pipes are the main components in hydroponic systems, which are made of food grade UPVC material. Depending on different needs, hydroponic pipes come in different styles for selection: openable pipe, closed pipe, shading and insulation pipe, etc.

Hydroponic Zipper Pipe
Hydroponic zipper pipe system occupies small space, this system can be easily equipped with flexible assembled. It could be hung on any wall, window, balcony or fence. This cultivation can save water, and effectively save energy and be easily maintained, it also improves gardening decoration and makes it more beautiful.

Clear food packaging, medical equipment, siding, piping, windows, shampoo bottles, etc,....

Wrought iron gates, entrance iron gates copper door

Wrought iron gate specifications :

Shanghai manufacturer wrought iron gate designs,copper iron gate designs

Used for medical instrument, temperature testing etc.

Specially used for pressure instrument

Specially used for handcrafts

Item
Test result
Copper
99.9%

0.003%


As customet requirement.

Product Overview
The M22759 series wire offers a wide operating temperature range of -55 to +260, providing reliable performance in the most extreme aviation and aerospace environments. With a rated voltage of 600V  / 1000V, it is suitable for systems with high current overload or mechanical pressure, and is ideal for space-constrained, weight-sensitive instruments and electronic equipment.� Its PTFE insulation is highly resistant to thermal shock from welding processes, making it an excellent choice for areas like aircraft engine compartments.

Product Specifications
Conductor:  silver-plated copper/ tinned copper� 
Insulation: PTFE /�  ETFE
Rated Voltage: 600V /1000V
Operating Temperature: -55 to +260
Insulation Thickness: 0.010 inches (0.254mm) [standard wall thickness]
Color Options: Black, brown, red, orange, yellow, green, blue, purple, gray, white, natural, dual-color stripes, or custom colors.

Product Features
1. High Breakdown Voltage: PTFE insulation has a volume resistivity of up to 10�¹â?¸ �©�·cm, low dielectric loss, and excellent resistance to high-voltage arcing.
2. Wide Temperature Tolerance: PTFE performs reliably from -190â?? to +260â?? (with short-term exposure up to 300â??), and is fire-resistant, self-extinguishing when removed from the flame.
3. Superior Chemical Resistance: PTFE is inert to almost all chemicals, including acids, alkalis, and solvents, and remains stable even in humid or saline environments.
4. Excellent Weatherability: Non-hygroscopic, non-flammable, and highly resistant to oxygen and UV radiation, ensuring long-term durability in outdoor and harsh conditions.

If you give me your drawings, and I will render you the perfect products! If you tell me your needs, and I will depict you the satisfying drawings! We hope to obtain your trust and affirmation with our speciality and sincere.! We treasure every opportunity to cooperate with you !

Features:
(1) Grade: stainless steel (304, 304L, 316, 316L, 316Ti, 317L, 310S, 321, etc.)
carbon steel (Q195, Q235, Q345, A/SA53, A/SA106, A/SA213, A/SA335 etc.)
(2) Standards: ASTM A554, JIS G3446, GB/T12770.
(3) DN: 6mm~1200mm
WT: 1mm~35mm
Length: customized

Detailed Product Description:
Ball mill is widely used for milling various kinds of ores or rocks in metal and non-metal mining and building material industry.The main bearing of the ball mill with the shell diameter 900-2100mm is spherical liner bearing; for the shell diameter 2700mm,the main bearing is completely closed self-aligning 120,bearing withBabbitt alloy of high lead and low tin with low hardness,underneath laid withcooling copper piping full of water The bearing is of static pressure structurewith high and low pressure united oil lubricating system.

Our Ball Mill is the key equipment for grinding after the crush process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other materials able to grind.

The Ball mill Model: §¶1830*3000,§¶1830*6400,§¶1830*7000,§¶2200*5500,§¶2200*6500,§¶2200*7500
Weight of ball mill:11£¬23£¬25,30,30,23.

Flat sand valve for abrasive blasting pot. 1-1/4" BSP thread design, without pipe nipple. Manual control, stable sand flow regulation, durable structure for continuous sandblasting work. Widely matched with standard blast pots.

Applications:
Cured concrete,concrete with aggregate,concrete pipe, concrete roof tile.
Features:
Professional, very long lifetime,fast cutting, dry and wet use.
For hand held saws,high speed saws ,low H.P. walk behind saws 3-18 H.P.

Command Energy’s drill collars are made of modified AISI 4145H chromium molybdenum alloy steel. These drill collar bars are full-length heat treated and water quenched to obtain mechanical properties as specified by API Spec 7-1.

Full mechanical and chemical mill test certifications are supplied with all drill collars. These mill test certifications guarantee a hardness range of 285 to 341 BHN and an impact value of 40 ft-lbs at room temperature, one inch below surface.

All drill collar bars are trepanned then drifted to API specifications to ensure close tolerance bores. Drill collars are also supplied with the outer surface either machined or rough peeled.

Stainless products
sus304
usage: curtain wall parts, pipe fitting, hardware etc.
We have laser cutting machine, pressing machine, bending machine, automatic welding robot, milling machine, CNC etc. We have ability to process all kinds of steel/stainless steel product according to customers'' drawings.

Product Introduction
Bing HRF is the 4th-generation special microwave ablation catheter cable developed by Bing for varicose vein treatment equipment. Widely adopted by mainstream manufacturers of microwave ablation devices and disposable ablation consumables, this cable features compact outer diameter, superior high-power transmission efficiency (fast ablation speed) and no surface overheating during operation, realizing reliable water-circulation-free design for clinical ablation catheters.
Manufactured with Bingâ??s proprietary raw materials and exclusive production craft:
Full flexible construction with excellent bendability for routing inside human cavity; moderate rigidity plus outstanding rebound elasticity
Supports extra-long catheter length up to 1.5m, structurally strong enough to withstand pushing force from distal end during clinical puncture surgery
Custom service available: we can tailor special flexible catheter cables in OD 1.80mm & 2.00mm for higher power transmission demands.

Core Features
Compact smaller outer diameter, optimized for minimally invasive catheter design
No surface overheating under working power, eliminating requirement for water circulation cooling system
High-precision impedance matching for consistent microwave signal transmission
Ultra-low VSWR to minimize signal reflection
Low insertion loss & low return loss, reducing power waste during energy delivery
Excellent shielding performance to avoid signal interference
High-efficiency microwave power transmission to speed up clinical ablation procedure

Typical Application: Specially matched for water-cooling-free varicose vein microwave ablation catheters, used in minimally invasive vascular clinical treatment equipment from medical device manufacturers

Product Overview
Foam-Flex 047 is foam-core low-loss flexible microwave coaxial cable with FEP outer jacket, overall outer diameter 1.48mm, 28AWG conductor construction. It follows universal industry dimensional standards and is compatible with mainstream RF connectors: SMA, 2.92mm, 2.4mm, 1.8mm, 1.0mm etc.
The cable adopts� double-layer composite shielding: spiral-wrapped silver-plated copper strip (100% full coverage shielding) plus outer silver-plated copper braided shield, enabling repeated flexing while reaching outstanding shielding effectiveness over-100dB @1GHz. Its electrical performance matches MIL-DTL-17 semi-rigid cable, yet owns excellent flexible property same as RG flexible wire, and can directly replace traditional semi-rigid / semi-flex coaxial cables with standard semi-rigid connectors. Core insulation is low-density foamed PTFE (LD-PTFE), greatly reducing dielectric loss and cable weight for low-loss high-frequency transmission.

Core Product Features
1. Ultra-low signal leakage & ultra-low VSWR, minimum signal reflection & power loss
2. True flexible design, withstand repeated dynamic bending without performance drift
3. Excellent mechanical phase & amplitude stability after frequent bending
4. Standard semi-rigid connector compatibility for easy assembly
5. Superior shielding efficiency-100dB@1GHz, strong anti-EMI capability
6. High mechanical durability for harsh ambient working condition
7. Lightweight construction compared with conventional solid PTFE semi-rigid cables

Typical Application Fields
1.Defense Electronics: Military radar, communication & EW system interconnect
2.Test & Measurement: Network/signal analyzer, high-frequency test bench jumper
3.Wireless Telecommunication: Base station, RF front-end & microwave link assembly
4.Medical Electronic Equipment: RF therapeutic & diagnostic instruments
5.Board-to-Board Interconnection for compact RF modules
6.Cabinet internal jumper wiring
7.Low-PIM application cables for communication system

Product Introduction
The True-Flex Series high-performance flexible microwave coaxial cables are designed to meet industry-standard form factors, supporting a wide range of connectors including SMA, 2.92mm, 2.4mm, 1.8mm, and 1.0mm. Built with a silver-plated copper tape wrap (providing 100% coverage) and an additional braided silver-plated copper shield, these cables offer exceptional shielding effectiveness up to -100 dB, while maintaining flexibility for repeated bending. They are engineered to use standard semi-rigid cable connectors, making them a drop-in replacement for traditional semi-rigid and semi-flexible cables, with superior bendability.

Key construction features include:
Solid PTFE dielectric for consistent electrical performance
Precision silver-plated copper tape wrap + silver-plated copper braid composite shielding
Optimized for both signal integrity and mechanical durability
Core Features
Repeated Bending Capability: Engineered to withstand repeated flexing without performance degradation
Exceptional Shielding Effectiveness: Up to -100 dB shielding for minimal EMI/RFI interference
Excellent Amplitude Stability: Ensures uniform signal amplitude across all operating conditions
Standardized Connector Compatibility: Works with industry-standard semi-rigid cable connectors
True Flexibility: Combines the performance of semi-rigid cables with the flexibility of flexible cables
High Durability: Rugged construction for long service life in demanding environments
Lightweight Design: Reduced weight compared to traditional semi-rigid cables

Typical Applications
1.Defense Electronics: Military communication, radar, and electronic warfare systems
2.Test & Measurement Instruments: Signal analyzers, network analyzers, and high-frequency test benches
3.Wireless Communications: Base stations, RF front-ends, and microwave links
4.Medical Electronic Devices: RF surgical tools, diagnostic equipment, and therapeutic devices
5.Board-to-Board Interconnects: Compact RF modules and high-density test equipment
6.Cabinet Jumpers: Internal wiring in high-density RF racks and test systems
PIM Cables: Low passive intermodulation applications in cellular and broadcast systems

Product Overview
Our Polyimide Film Composite Insulated Aerospace Wires are engineered to meet the most demanding requirements of commercial and military aircraft, designed for harsh environments and extreme operating conditions. Featuring a robust "Polyimide + Fluororesin (PTFE/FEP)" composite insulation system, these wires deliver an optimal balance of small size, high temperature resistance, lightweight construction, low flame propagation, and superior mechanical durability (scratch and impact resistance). With excellent arc resistance, mold and fungi resistance, and outstanding aviation fuel tolerance, they are the ideal solution for high-reliability applications in aerospace and defense systems.

Common Key Features
1.Wide-Temperature Performance: Stable operation from -90�°C to +200�°C, ensuring reliability in extreme environmental conditions.
2.Lightweight Design: Thin/medium-wall construction significantly reduces weight compared to traditional cables, meeting critical aerospace weight-saving requirements.
3.Superior Mechanical Durability: Excellent scratch, impact, and arc resistance, along with mold/fungi resistance, making them ideal for high-vibration, high-humidity cabin environments.
4.Chemical Compatibility: Outstanding resistance to aviation kerosene, hydraulic fluids, and other common aerospace fluids.
5.Low Flame Propagation: Compliant with strict aerospace standards for low smoke and low toxicity in the event of a fire, enhancing cabin safety.

1.Construction Process
1)HT-SPC / H-SPC: 3-layer structure (conductor + composite insulation + PTFE jacket) for enhanced protection, ideal for complex cabin environments.
2)TH-SPC: Combines PTFE extrusion with polyimide wrapping to improve insulation penetration and scratch resistance. It meets the military standard M22759/28, making it suitable for high-reliability military applications.
3)HET-SPC / HE-SPC: 2-layer structure (conductor + composite insulation) without a jacket, providing maximum light weighting for space-constrained cabin wiring.

2.Voltage Rating & Wall Thickness
1) 250V Series (HT-SPC / HET-SPC): Thinner insulation for low-voltage, weight-sensitive applications.
2) 600V Series (H-SPC / TH-SPC / HE-SPC): Thicker insulation to meet the higher dielectric strength requirements of power and control circuits.

Typical Applications
1)Aerospace & Aviation: Wiring for avionics, control, and power systems in commercial and military aircraft, as well as satellite internal wiring.
2)Defense Systems: High-reliability wiring for military aircraft, drones, and missile systems.
3)High-Performance Industrial: Control wiring for equipment operating in extreme environments, requiring both lightweight construction and high weather resistance.

1. Product Overview â?? Military-Grade PTFE Insulated Wire
Our MIL-W-16878 series stranded PTFE insulated wire is manufactured to meet MIL-W-16878 military specification, offering best-in-class high-temperature performance and electrical stability for demanding environments. These wires are ideal for aerospace, defense, industrial, and high-reliability electronic applications.

2. Key Features & Benefits MIL Military Standard:
Fully compliance with MIL-W-16878 military specification for high-reliability wiring.
PTFE Insulation: 100% extruded PTFE insulation provides excellent thermal resistance, superb electrical insulation, and strong chemical resistance.
Wide Temperature Range: Operating from -55C up to +200C (higher with optional plating).
Silver-Plated Stranded Copper: Offers low resistance, corrosion protection, and enhanced conductivity.
Multiple Voltage Ratings: Range from 250V to 1000V depending on type and wall thickness.
Flexible & Durable: Stranded conductor ensures high flexibility while maintaining mechanical strength.

3. Applications This wire is widely used in:
Aerospace & Avionics systems (flight controls, sensors)
Military electronics & communication equipment
Industrial control systems
High-temperature engine area wiring
Power and instrumentation harnesses

Product Introduction
The RG Series (M17/RG Type) Coaxial Cables are high-performance, flexible RF/microwave cables designed for miniature coaxial interconnects. Built with silver-plated copper braid shielding, these cables meet all� MIL-C-17 requirements, offering excellent shielding effectiveness and low Passive Intermodulation (PIM). They are widely used in HF, VHF, and UHF applications, including internal connections in wireless base stations. The series is fully compliant with the RoHS� standard. We can also provide tailored OEM/ODM solutions to fit your exact project needs, including various RG series specifications, custom cable lengths, precision connector assembly (SMA, N, BNC, TNC, etc), and specific labeling or packaging options.

Core Features
1. Excellent EMI Protection & Flexibility: Silver-plated copper braided shielding provides strong immunity to electromagnetic interference, while the flexible construction supports tight routing.
2. Superior Mechanical Performance: Durable build quality ensures long-term reliability under repeated bending and mechanical stress.
3. Lightweight & Environmentally Resistant: Low weight combined with high-temperature, moisture, and corrosion resistance for harsh environments.
4. Outstanding Electrical Performance: Excellent shielding, low attenuation, and low VSWR ensure consistent signal integrity across frequencies.

Typical Applications
These versatile RG series cables are widely used in high-performance systems:
1. Wireless & Mobile Communication Systems: Base station interconnects and RF front-ends
2. GPS & Navigation Systems: Antenna feeds and signal distribution
3. Antenna Systems: HF/VHF/UHF antennas and feeder lines
4. Delay Lines & Test Equipment: Precision signal routing and test benches
5. Medical Electronics: Therapeutic and diagnostic RF devices
6. Test & Measurement: Lab instruments, signal analyzers, and calibration setups

Product Introduction
Our RF Series Ultra-Thin Coaxial Cables� (including RF0.81, RF1.13, RF1.32, RF1.37, RF1.48) are high-performance, miniature RF interconnect solutions. Designed for compact, high-frequency applications, these cables combine excellent flexibility, durability, and signal integrity.

Core Features
1. Superior Flexibility & Bend Resistance: Engineered to withstand repeated bending without performance degradation, ideal for tight spaces and moving applications.
2. High Durability: Corrosion-resistant, flame-retardant, and aging-resistant construction ensures long-term reliability in harsh environments.
3. Stable Signal Performance: Optimized design improves data transmission accuracy and stability for high-frequency signals.
4. Ultra-Compact Form Factor: Small outer diameters make them perfect for space-constrained consumer electronics and medical devices.

Typical Applications
These ultra-thin coaxial cables are widely used in:
1 Consumer Electronics: Mobile phones, laptops, digital cameras
2 Navigation & Positioning: GPS receivers and tracking systems
3 Medical Devices: Ultrasound equipment and diagnostic instruments
4 High-Frequency Interconnects: Compact RF modules and test equipment

Product Introduction
The TRX Series Tri-Shield Coaxial Cables (including TRX-178, TRX-179, TRX-316, TRX-180, TRX-142, TRX-400) are premium-grade RF interconnect solutions engineered for critical applications requiring exceptional signal integrity. The triple-shielded design provides superior protection against electromagnetic interference (EMI), ensuring low noise and stable performance in demanding environments.

Structure:
1. Inner Conductor: Silver-plated Copper Alloy
2. Insulation: PTFE (Polytetrafluoroethylene)
3. Inner Shield: Silver-plated Copper Braid
4. Inner Jacket: FEP (Fluorinated Ethylene Propylene)
5. Outer Shield: Silver-plated Copper Braid
6. Outer Jacket: FEP (Fluorinated Ethylene Propylene)

Core Features
1.Precision PTFE Insulation: Delivers consistent electrical performance, low loss, and high-temperature resistance.
2.High-Density Triple Shielding: Multi-layer braided shields achieve excellent shielding effectiveness, minimizing signal leakage and external interference.
3.Low Noise & High Immunity: Advanced construction resists signal interference, reducing noise and ensuring clean signal transmission.
4.Enhanced Signal Integrity: Optimized design improves data transmission accuracy and long-term stability.

Specification
Model Inner Conductor Insulation (mm) Inner Shield (mm) Inner Jacket (mm) Outer Shield (mm) Outer Jacket (mm)
TRX-178 7/0.10 0.86 1.26 1.88 2.29 2.95
TRX-179 7/0.10 1.60 2.00 2.51 2.92 3.58
TRX-316 7/0.17 1.52 1.93 2.44 2.85 3.56
TRX-180 7/0.102 2.59 3.00 3.51 3.91 4.57
TRX-142 1/0.94 3.00 3.50 4.22 4.72 5.46
TRX-400 19/0.203 3.00 3.45 4.22 4.72 5.46

Typical Applications
These high-performance tri-shield cables are ideal for:
1) RF & Microwave Systems: Transmitters, receivers, and antenna feeds
2) Test & Measurement: High-frequency test benches and signal analyzers
3) Aerospace & Defense: Avionics, radar systems, and military communications
4) Telecommunications: Base stations, broadcast equipment, and high-speed data links
5) Medical Equipment: MRI, RF surgical tools, and diagnostic instruments

Sanitary Vs. Standard Electromagnetic Flow Meters
d and beverage processing. Choosing between sanitary and standard models can significantly impact cost, compliance, and operational efficiency. This guide helps you select the right flow meter for your facility, whether you need an electromagnetic flow meter for beer, pure water, or jam, or a food grade flow meter for dairy and beer.

Key Requirements for Food-Grade Flow Meters
Food and beverage applications require hygienic electromagnetic flow meters that meet strict hygiene and safety standards:

Hygienic Design

3-A Sanitary Certification: Ensures smooth surfaces (â?¤0.8 �µm roughness) with no crevices to prevent bacterial growth.
FDA-Compliant Materials: PTFE or PFA liners and 316L stainless steel electrodes prevent contamination.
CIP/SIP Compatibility: Withstands high-temperature caustic cleaning cycles.
Material Safety

Non-toxic, non-absorbent materials.
No lubricants or seals that could harbor pathogens.
Performance in Low-Conductivity Fluids

Advanced models with â??Signal Boostâ?? technology can measure low-conductivity liquids like milk (~500 �µS/cm).
Ideal for applications requiring a conductivity meter for food and beverage or a food grade electromagnetic flow meter.

liquid mass flow meter

Coriolis Mass Flowmeter (abbreviated as CMF) is a high â?? precision flow instrument that directly measures the mass flow of fluids. It operates based on the principle of the Coriolis Effect. It can not only measure mass flow but also simultaneously obtain parameters such as density and temperature, and is widely used in fields such as petrochemical, food and medicine, and energy metering.

Working Principle
Coriolis Effect
When the fluid flows through the vibrating measuring tube, a Coriolis Force is generated, causing the measuring tube to undergo a slight deformation. By detecting this deformation, the mass flow of the fluid can be calculated.



Measuring tube vibration: The electromagnetic drive makes the measuring tube vibrate at its natural frequency.
Phase difference detection: When the fluid is flowing, the vibration phase difference between the inlet and the outlet is proportional to the mass flow.
Density calculation: The vibration frequency of the measuring tube is related to the fluid density, enabling synchronous density calculation.

Casing pipe:
(1) Grade: J55/k55, N80, L80, P110, C90, C95, T95 etc.
(2) Standards: API 5CT, API SPEC 5CT, EN 10217-1-2002, EN10217-2-2002,
(3) DN: 2 3/8"~13 3/8"
WT: 6.35mm~11.13mm
Length: customized

Drill tube/pipe:
(1)Grade: E75, X95, G105, S135 etc.
(2)Standards: API 5D
(3)DN: 2 3/8f¼~5f?
WT: 6.35mm~7.92mm
Length: customized

Pressure Vessels and Tanks
We manufacture pressure vessels, storage tank, reaction tower, heat exchanger, Jacketed Vessel and Clean Tank with Jacket, nonstandard equipments and Agitator equipments. These equipments can be made according to all kinds of standard such as Chinese GB150-98,AMSE, BS5500,PED requirement and CE mark, and the same all kinds of material used for it such as CS,SS( 304,304L,316,316L,321,347),Ti,AI,Cu etc.

Pressure vessel
All kinds of pressure vessel
High, medium and low pressure vessel
ASME standard pressure vessel
CE marked pressure vessel
Pressure vessel may of carbon steel, stainless Steel and other material

We possesses and abundant strength in the fields of painting, electroplating, heat treatment, sheet-metal forming, metal processing, non-metal manufacturing, riveting and assembling. We can manufacture all kinds of machinery parts and equipments based on the Chinese ability of machinery manufacturing.

Our sub-factory can manufacture metal processing parts and Cold Bended Steel machinery for foreign companyú«We can provide mainly color (black) metal mechanical components' process and all kinds of Cold Bended Formed Steel involving cable trays, electrical equipment, machinery furniture and parts. We have the capacity of high-volume precision parts and formed-steel yielding and guarantees products technical requirements of a variety of customers.

Our partner is Chinese bigger state military industrial enterprises with a strong multifunction and production capacity. It has more than 6400 machining facilities, among which the quantity of CNC machines stands in the front position in the same trade in China. It possesses and abundant strength in the fields of painting, electroplating, heat treatment, sheet-metal forming, metal processing, non-metal manufacturing, riveting and assembling. Especially in recent years, batches of international advanced equipment, such as five-axis CNC machines, fluid cell presses, CNC section stretch forming presses, sheet stretch forming presses, precision internal and external grinding machines, cam grinders, multipurpose furnaces, vacuum furnaces, etc. have been introduced, making the integrated processing capability of the enterprise more powerful in competition. During the Tenth Five-year, HONGDU will enhance technical reconstruction and improve further the capabilities of sheet metal forming, CNC machining, etc., to make the manufacture-engineering and processing capability reach the domestic advanced level.

Belt Conveyer

Belt conveyer is a kind of machine that to transfer the material continuously. The belt works under the effect of frictional force. It is not only the components to transfer the material, but also the components to transfer the force.

The belt conveyer is advanced and simple in structure, easy to maintain. Its transfer capacity is high, transfer distance is long. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. In many situation, it Is a very important component of nonstandard machinery.
We can Provide the following Productions:
General Conveyor Mechanism
Horizontal Curve Conveyor Mechanism
Mobile Conveyor Mechanism
Pipe Belt Conveyor Mechanism
Screw Conveyor Mechanism

Conveyor Rubber Belt
General Steel Cord Conveyor Belt
Horizontal Curve Conveyor Mechanism

We serve our clients in power generation business and all traditional areas of the process industries such as chemical and petrochemical plants as well as refineries. Our Production portfolio includes products and systems for:
Direct Dry Cooling (Air Fin Coolers)
Direct Condensing (Air Cooled Condensers)
Indirect Wet Cooling (Natural Draft Cooling Towers)
Cell Cooling Towers, Hybrid Cooling Towers
Industry Dry Cooling (Mainly Heller System)
Special Applications (Surface Condensers, desublimator, Post Reactors, Shell &Tube Heat Exchangers, Bop Engineering)
Plate heat exchanger
Exchanger Scraped Surface
Exchanger shell and tubular
Exchanger spiral heat
Pipe heat exchanger
Tube and shell exchanger
Cooling condensation equipments



Based on our technology, we are able to develop individual solution as well as standardized system for our customers. Our products are designed for optimal performance, cost-effective operation and minimal maintenance.

Our mission is to be the preferred supplier, recognized for our innovative productions as well as for the high degree of added value generated & quality for our clients.

Shanghai manufacturer wrought iron gate designs,copper iron gate designs

1. Good installation guide
2. Rust-proof:hot galvanized
3. Good shipping service
4.Customized design, color, size, packing, logo etc.